sceKernelMkdir checked that the parent of the resolved path exists, but
for "dir/" std::filesystem::path reports "dir" itself as the parent, so
the call failed with ENOENT and created nothing, while FreeBSD's mkdir
(and the POSIX mkdir export) accept it. Strip trailing separators first,
and report ENOTDIR when the parent exists but is not a directory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 5f74ddba8b346e6c552cf02554d47382708206f3)
The Windows sceKernelPread stopped going through pread when it learned to
return errors, and with it lost the random device read, so a pread on
/dev/urandom reached ReadFile on a handle that is not a disk and failed
with ESPIPE. Read random devices first, as the Linux path does.
A pread into a read-only guest mapping now returns EFAULT instead of
throwing, matching Linux and the AIO read beside it, so the Windows
guest memory test checks for that return.
An unmapped range inside the guest arena stays a PROT_NONE host
reservation, so host munlock succeeds on it. Check the guest mapping
state first, as msync does, and return ENOMEM for ranges the guest
has not mapped or reserved.
The arena constructor was Windows-only, so on Linux Available() was false: the guest heap fell back to the host allocator and direct memory landed wherever the kernel pleased. Titles that require a low virtual address rejected the mapping and re-issued the identical request, which surfaced as a start-up assert inside their own allocator.
Seed the window from the mappings that already exist instead of reserving it up front, because a PROT_NONE reservation of the whole range starves the kernel's own top-down mmap, which picks addresses just below the stack inside that range. Commit, reset and set-protection become portable so the arena owns its used ranges on both platforms, and fixed mappings are checked against the arena's used ranges rather than against EEXIST from a reservation.
The window-placement and no-overwrite checks in guest_memory were compiled only for Windows; they now run on Linux too, and the window check fails without this change.
Fixes#692
Since guest threads get exactly the stack size they request, host code
that a guest thread calls runs on that small stack too. sceAgcCreateShader
reaches Driver::RegisterShader, whose frame alone is about 50 KiB, so a
title whose job threads ask for 48 KiB overflows the stack (#2603).
Each guest thread now gets a fixed 1 MiB of host stack below the range it
asked for. The guest still sees the requested size and address range
through scePthreadAttrGet and sceKernelIsStack; only host calls made from
the thread use the extra room. Running the prepared-shader driver tests on
a limited main-thread stack needs between 128 and 192 KiB for shader
registration, Vulkan setup included, so 1 MiB leaves several times that.
Switching to a separate host stack at each HLE entry point would need a
trampoline on every export that may go deep, handling of stack-passed
arguments and unwinding across the switch, and a list of which exports
qualify. A margin below the guest range covers every host call with no
per-export list.
On Windows the committed size was the requested size, and the margin
below it depended on the executable's default stack reserve; requests at
or above that reserve had none. The commit now includes the same margin.
macOS does not run guest threads.
guest_pthread_stack now also calls host code that uses 256 KiB of stack
below each thread's guest range; without the margin it crashes on the
16 KiB thread.
Fixes#2603
scePthreadCancel and pthread_cancel threw, scePthreadTestcancel did
nothing and the cleanup handler exports did not exist.
A cancel request is now recorded on the thread and acted on at
scePthreadTestcancel, the condition variable waits, scePthreadSem and
sem waits, scePthreadJoin and the sleeps, and under their POSIX names.
A thread blocked in one of the waits is woken; a condition wait takes
its mutex back before the thread exits. The thread exits with
PTHREAD_CANCELED through scePthreadExit, which now runs the handlers
of __pthread_cleanup_push_imp and __pthread_cleanup_pop_imp.
scePthreadSetcancelstate and scePthreadSetcanceltype reject unknown
values, and pthread_setcanceltype is added.
Constants, the handler node layout and the order of events follow
FreeBSD libthr. A sleep is not interrupted, file and socket calls are
not cancellation points and the asynchronous type acts like the
deferred one except at the two set calls (TechnicalDebt). New test:
guest_pthread_cancel.
Leave the Windows identity fields at their stat values when
GetFileInformationByHandle fails on a handle whose basic information
could be read, instead of failing the whole call.
st_ino was always 0 and st_dev differed between stat (drive number) and
fstat (0), so the usual a.st_dev == b.st_dev && a.st_ino == b.st_ino
identity check gave wrong answers. Read the volume serial, the file index
and the link count from the file handle, which works the same for path and
descriptor lookups.
Fixes#2296
ProsperoStore (PPSA99000) imports kill from libkernel and stops at it on
current main. Its crash reporter resets a crash signal to SIG_DFL and
sends it again with kill(getpid(), signal).
kill follows FreeBSD's kern_kill and killpg1 for the only guest process:
EINVAL for signals outside 0 to 128, signal 0 only checks the target,
and the caller's own pid, 0 and minus its pid deliver through raise.
Any other pid, and -1, which skips the caller, report ESRCH.
The registry records whether a range was mapped or protected with GPU
access (0x10/0x20), and an address-based build leaves out ranges without
it, as the console's GPU page tables do. The main image is registered
without GPU access; the title's own mprotect with GPU bits adds it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Move the image unregistration out of the Module destructor into
dlclose_nid_postfix. It runs while the handle is still registered, so a
failure (the image stays leased by GPU work) propagates to the caller and
leaves the module loaded and usable. Images shared by another open
handle stay registered until the last handle closes.
guest_memory now checks that dlclose under a held lease throws and keeps
the module, its symbols and its protection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A .guest.prx image registered by sceKernelMprotect stayed in the guest
allocation registry after dlclose freed it, so its dead ranges blocked
later mappings at that address and could reach GPU builds.
The Windows module destructor now unregisters the image before
FreeLibrary. Unregistering waits for outstanding leases on the image like
unmap and protect do; if the wait fails the module stays loaded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Windows, sceKernelMprotect accepted only the executable's image and threw
"Memory protection of a foreign image is not supported" for every other
image. Bundled title modules are relinked into DLLs named <module>.guest.prx,
so a title that reprotects its own module pages failed. Dying Light 2's
bundled libNRD does this at start-up (#1794).
DoMprotect now also accepts images whose file name ends in .guest.prx, and
registers their committed pages like the executable's. Other images are
still refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Windows, sceKernelPread and sceKernelPwrite called the POSIX pread and
pwrite wrappers, which throw on every failure, so a bad descriptor, a
negative offset or a write to a read-only descriptor aborted the process
instead of returning an error as the Linux build does. ftruncate and
sceKernelFtruncate threw on any host failure on both platforms.
Give the Windows sceKernelPread and sceKernelPwrite the same checks and
SceErrorFromErrno returns as the Linux ones, and accept a zero-length
transfer with a null buffer. Report a positioned transfer on a handle
opened without the needed access as EBADF instead of EIO. Return EINVAL
from ftruncate for a negative length and for a descriptor opened without
write access, as FreeBSD does, and pass other host errors to the guest.
Fixes#2423
On Windows, getargc and getargv reported only the executable path, read
with GetModuleFileNameA in the ANSI code page, and dropped every other
argument. Linux returns the whole command line from /proc/self/cmdline,
and the relinker's Windows entry stub already passes the guest entry all
arguments converted to UTF-8.
Parse GetCommandLineW with CommandLineToArgvW and convert each argument
to UTF-8 with WC_ERR_INVALID_CHARS, as the entry stub does, so getargv
matches the entry's argv and the Linux behaviour. The Linux path is
unchanged.
On Windows std::_Exit ends in ExitProcess, which still runs every module's
DLL_PROCESS_DETACH and TLS callbacks after the other threads are gone. A
static destructor that joins a worker then waits forever: a title that calls
_Exit while libSceVideoOut's flip queue runs (ps5-opengl's retirement
fail-stop) stays alive in FlipQueue's destructor. _Exit and libkernel's _exit
now terminate the process with TerminateProcess, as _exit ends a POSIX
process: no atexit handlers, stream flushes or module destructors.
waitpid returns -1 with ECHILD, or EINVAL for an option FreeBSD does not know, and leaves the status unwritten: AnyPS5 runs the title as one process and exports nothing that creates a child. VLC PPSA85300 stops on main at this import.
AI-assisted: yes. Match the firmware 13.60 probe in PR #1798: names of 32 bytes or more return guest ENAMETOOLONG=63 and preserve the prior name. The complete final change passed a full Windows build and eight focused runtime tests.
Neither existed under the guest root, so opening them failed and titles
that then read from the descriptor crashed. Opening either for reading
now returns a descriptor whose reads, positioned reads and vector reads
fill the buffer from the host's random device, as
sceRandomGetRandomNumber does. Opening them for writing throws.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
scePthreadCreate on Linux started guest threads with std::thread, so every
thread got the host default stack (RLIMIT_STACK, usually 8 MiB) whatever the
title asked for. A thread that asks for more than that and uses it crashes
with SIGSEGV. Once the thread ran, scePthreadAttrGet also reported the host
size instead of the requested one.
Create the thread with pthread_create and a stack of the requested size plus
what glibc keeps at its top (static TLS, the thread control block and the
start_thread frame). That reserve is measured once with a probe thread.
The thread reports [top - reserve - size, top - reserve) as its stack, as
Windows reports [top - size, top), and the creator waits until the range is
set, as on Windows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A zero, unaligned, overflowing or out-of-range length reached the physical pool, where a sub-page length silently freed a whole page and fragmented the block map, and an out-of-range length walked the page table past the backing store. Validate alignment and bounds up front and return EINVAL instead.
MarcZX100
Achraf Reyani
Dean
Dean Galvin
jeffrey12cali
Adrià
Nicolas Abosch
Hussein Kadhim
overlordxrz-source
raghav314
Lexroid
Doston Abdullayev
AlxcBTW
LuisBiceps
EdouardSence
QRMOE
MathiasDevelopes
NevesHenry
erick-dsnk
Pouare514