On a PS5 (firmware 13.60) pthread_setschedparam and
scePthreadSetschedparam accept only SCHED_FIFO and SCHED_RR with a
priority of 256 to 767 or 896 to 959, return EINVAL otherwise, and
keep the policy for pthread_getschedparam. A created thread takes the
policy of explicit scheduling attributes, or its creator's when it
inherits. Here any policy and priority were accepted and SCHED_FIFO
was always reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three catalog titles stop on Windows when they poll a guest socket for
POLLPRI|POLLOUT to see whether a non-blocking connect has completed:
- PPSA97510 PSXS5 (socket 0x10000002, thread gamedb, 13 s):
what(): poll: POLLPRI is not supported by WSAPoll
- PPSA98510 SwanStation (sockets 0x10000003/0x10000002, threads gamedb
and update): what(): poll: POLLPRI is not supported by WSAPoll
- PPSA99003 ProsperoTV ({0x10000001, POLLPRI|POLLOUT} at 5.3 s):
what(): poll: POLLPRI is not supported by WSAPoll
FreeBSD's sopoll_generic (sys/kern/uipc_socket.c, freebsd-src 8c639945)
reports POLLPRI and POLLRDBAND alike, only while out-of-band data is
pending (so_oobmark or SBS_RCVATMARK). WSAPoll rejects POLLPRI in events
with WSAEINVAL but reports pending urgent data as POLLRDBAND, so on
Windows the guest POLLPRI is now asked of WSAPoll as POLLRDBAND and
POLLIN as POLLRDNORM (Winsock's POLLIN includes POLLRDBAND, which would
report urgent data as readable). Measured on this host: WSAPoll reports
POLLRDBAND after a peer's send(MSG_OOB), waits for it, and clears it once
the byte is read with MSG_OOB. Linux keeps polling POLLPRI on the host.
select needs no change: libkernel's select passes exceptfds as Urgent to
the libSceNet poller, which already asks WSAPoll for POLLRDBAND, and it
does not take libkernel guest sockets on either host.
The guest send and recv refuse MSG_OOB, so urgent data only comes from a
peer outside the guest's sockets; guest_poll now sends it from a host
socket and checks that a connected pair and a non-blocking connect
report POLLOUT and not POLLPRI. TechnicalDebt records where Winsock's
answer differs from FreeBSD's once the stream passes the mark.
Depends on #3649 (poll on file descriptors), whose two commits this
branch carries, since the titles reach this stop only with it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
mlockall (x7g7Ebeo8-U, aerolib) follows FreeBSD 11.4's sys_mlockall
(sys/vm/vm_mmap.c:1067-1131, freebsd-src
8c639945a44588f6cfdddfb057bb5aad88735da0) for the flag check: 0 or
bits outside MCL_CURRENT (1) and MCL_FUTURE (2) fail with EINVAL. The
title process is taken to pass priv_check(PRIV_VM_MLOCK), as mlock
already does.
Valid flags throw. MCL_FUTURE would need every later guest and host
mapping to be locked; nothing in the mapping paths does that, and
passing it to the host would make later host allocations fail above
the host RLIMIT_MEMLOCK. MCL_CURRENT would have to lock the whole
process, which on AnyPS5 also holds host stacks, heaps, modules and
driver mappings (sceKernelVirtualQuery reports them as guest memory),
with ENOMEM above a guest RLIMIT_MEMLOCK that is not known (getrlimit
throws for it). mlock pins host pages (VirtualLock, mlock) range by
range and keeps no record, so there is no state to extend. Recorded
in TechnicalDebt.
XPSemu (PPSA97358) calls it only with -overcommit mem-lock=on
(ZiZc3/XPSemu 8eec07b4, os-posix.c:330-355, reached from
system/vl.c:831-835):
int flags = MCL_CURRENT | MCL_FUTURE;
...
ret = mlockall(flags);
if (ret < 0) {
error_report("mlockall: %s", strerror(errno));
}
and exits on failure, so that option ends in the throw; without it
the title is not affected. Predicted stop removed (registry index 201,
not run):
FAIL: unresolved ELF import x7g7Ebeo8-U from libkernel.prx
guest_mlock checks EINVAL for 0, 4, 5 and -1 and the throw for 1, 2
and 3.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
(cherry picked from commit 87f4aa331b02d098fe27516809495447ff6a9fa6)
Black Myth: Wukong (PPSA23226) exits at start-up with
STATUS_DLL_NOT_FOUND after "Failed to load module:
libs\libSceDbgThreadSanitizer.prx". The executable does not need the
library: its bundled sce_module/libSceJobManager_nosubmission.prx lists
it in DT_NEEDED and imports __tsan_acquire and __tsan_release from it,
plus sceKernelIsThreadSanitizerEnabled from libkernel. The relinker
converts every module in sce_module and loads it at start-up (only
--module-dir directories are deferred), and GuestModuleBuilder adds each
module's host dependencies to the executable's DT_NEEDED, which the
Windows start-up stub loads.
libSceDbgThreadSanitizer now exports __tsan_acquire and __tsan_release
with the void(void* addr) signatures of LLVM compiler-rt's
tsan_interface.h (llvm-project 87f0227cb601, LLVM 20.1.8). Both throw:
AnyPS5 runs no race detector, and the module calls them only after
sceKernelIsThreadSanitizerEnabled reports the sanitizer enabled.
libkernel's sceKernelIsThreadSanitizerEnabled returns 0, as
sceKernelIsAddressSanitizerEnabled does; its int(void) signature is
assumed and recorded in the libkernel debt file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sceCoredumpWriteUserData (Dbbkj6YHWdo) and sceCoredumpDebugTextOut
(dei8oUx6DbU) get the signatures of Orbital's db_types.json (cc408367)
and SharpProspero's KernelSystem.cs (5dfdb4b0): ssize_t (const void*,
size_t) and void (const char*, int). WriteUserData moves out of
Unimplemented.cpp.
User data belongs to the core dump handler: the Vita's
sceCoredumpWriteUserData returns 0x800A0003 ("No user-data capture is
active") outside it (vita-headers e66ebe90), and the RED engine's PS4
crash handler makes every coredump call from its handler (Vangaurd
4f86d2b0). The handler is never invoked here, so WriteUserData returns
SCE_COREDUMP_ERROR_NOT_IN_COREDUMP_HANDLER (0x81180003, shadPS4
coredump_error.h e0a46675) sign-extended and keeps nothing; a null,
empty or wrapping buffer throws because the order of the console's
checks is unknown. DebugTextOut prints its text to stderr with the
[coredump] prefix; a negative length or a null text with a nonzero
length throws.
Evidence: Broken Sword Reforged (PPSA21480) reaches the family through
its sibling, #3704 comment 6113687542: "`ERROR agc_graphics.cpp:266
Sony call failed with code 8a6c9018` (the resource registration error,
followed by the error dialog), then `sceCoredumpWriteUserString not
implemented`." WriteUserString has no declaration in any source and
keeps throwing; its TechnicalDebt entry records the call. 007 First
Light (PPSA11386) imports WriteUserData (#2523) without calling it
before its stop.
Test: guest_coredump_user_data.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
libkernel numbered guest sockets from GuestSockets::FirstDescriptor
(0x10000000), so a title that puts a socket in a 1024-bit fd_set writes
fd / 8 bytes past it. The Epic Online Services SDK does this on its
RtcNetworkThread and three titles stop there (#1794):
Palworld PPSA23126 (queeeef, main a11c8f7f7):
FATAL: unhandled exception 0xc0000005 on thread 37164 'RtcNetworkThread'
rip 0x00007ffcdb1ea2be eossdk-ps5-shipping.prx.guest.prx+0xdea2be
rcx 0000000010000005 rsi 0000000000400000 r12 0000000010000005
The Mound PPSA26223 (xXPBSXx, main 0a8b1d32b):
FATAL: unhandled exception 0xc0000005 on thread 'RtcNetworkThread',
rip eossdk-ps5-shipping.prx.guest.prx+0xefc6f4, rcx = 0x10000005,
rsi = 0x400000
Dying Light 2 PPSA02262 (tv7):
FATAL: unhandled exception 0xc0000005 on thread 'RtcNetworkThread'
rcx 0000000010000005 ... rsi 0000000000400000 ... r12 0000000010000005
On FreeBSD 11.4 (8c639945) FD_SETSIZE is 1024 (sys/sys/select.h:58-59)
and sockets take the lowest free entry of the one process descriptor
table that files use (kern_descrip.c:1643-1660 fdalloc,
uipc_syscalls.c kern_socket through falloc).
Every socket number is now a real host descriptor: a zero-access NUL
handle registered with _open_osfhandle on Windows (as directory
descriptors already are) and an F_DUPFD_CLOEXEC duplicate of the host
socket on Linux. The socket table maps that number to the socket, so
"is this a socket" is a table lookup instead of a range check at the 31
former FirstDescriptor comparisons. close releases both the socket entry
and the number, dup and dup2 duplicate the number through the host table
and keep the socket shared, dup2 of a file onto a socket number drops the
socket entry, and sceKernelClose now closes sockets too. sceNetSocket and
sceNetAccept take their ids from the same table instead of a counter from
32, so libkernel and libSceNet numbers never collide.
select polls guest sockets alongside libSceNet sockets, the random device,
stdio and (on Linux) host descriptors; poll throws only for an open
descriptor that is not a guest socket and reports POLLNVAL otherwise.
File calls that used to fail with EBADF on the socket range return
FreeBSD's answer for a socket: lseek ESPIPE (kern_lseek), ftruncate and
getdirentries EINVAL (invfo_truncate, getvnode), flock EOPNOTSUPP;
fstat on a socket throws. pread on a closed descriptor returns EBADF.
title failing on host descriptor numbers; these three titles are that
case, and this change keeps host numbering for files and only moves
sockets into it.
Tests: guest_socket_descriptors (new: socket below 1024, select on a
socket and a file together, close frees the number for a file, dup of a
socket, sceKernelClose), guest_select (socket and pipe together, Linux),
guest_poll, guest_dup, guest_socket_pair, guest_fstatfs,
guest_posix_filesystem and guest_sce_net updated.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
(cherry picked from commit 20378375b31eb5db922db6e55f45e44a4dae6445)
FreeBSD's pollscan clears POLLOUT whenever POLLHUP is set, so a write end
whose read end is closed reports POLLHUP alone, with POLLIN and POLLRDNORM
when they were asked for; both host paths reported POLLOUT | POLLHUP.
POLLOUT on a read end now throws. FreeBSD opens both ends FREAD | FWRITE
and pipe_poll reports the read end writable, which a one-way host pipe
cannot back.
guest_poll drained 1 KiB from the full pipe before expecting POLLOUT, but
Linux reports it only once a whole 4 KiB page is free, so the test aborted
there. It now drains the pipe, which is writable on every host.
inotify queues IN_MOVED_FROM and IN_MOVED_TO of a rename one after the
other. The watcher thread could read the first before the second was
queued and report a rename inside the directory as a move to another
directory (NOTE_WRITE | NOTE_EXTEND instead of NOTE_WRITE), which made
guest_kqueue abort on loaded runners.
The watcher now reads the queue until it is empty and, when a move half
has no partner, calls getdents64 on the directory before reading again:
that takes the directory lock rename holds until both halves are queued.
The libc.prx heap that Animal Well (PPSA22520 01.000.011, SDK 9.04)
bundles maps each arena with sceKernelMapFlexibleMemory(&addr, len, 3,
0x8000). It threw "Unsupported memory mapping flags 0x8000" before the
first frame. The flag is ignored as sceKernelMapNamedFlexibleMemoryInternal
already does; other unknown flags still throw.
Return the event's data when EV_ERROR is set in its flags and 0 otherwise, as KytyPS5 does and as FreeBSD 11 kevent stores the errno of a failed change. A null event throws like the other accessors.
PPSA30601 (Resonance) stops at the throwing stub. The four int* arguments follow
OpenOrbis' libkernel.h, the Orbital type database and SharpProspero; the values
follow KytyPS5 (2048 entries of 2 MiB per side) without its accounting of used
entries, listed in TechnicalDebt.md. A null pointer returns EFAULT.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
ProsperoTV (PPSA99003) stops after its menu opens because poll threw for
the read end of a pipe it polls next to its sockets. poll now reports pipe
readiness as FreeBSD's pipe_poll does: readable when data is buffered,
POLLHUP once the other end is closed, writable when PIPE_BUF bytes are
free. On Windows the pipe is checked with NtQueryInformationFile while the
sockets are waited on in 1 ms slices; on Linux the host poll waits on both.
A closed descriptor below the socket range reports POLLNVAL.
Before: raise, kill and pthread_kill delivered a signal at once or failed
with EINVAL, nothing stayed pending, and pause, sigwait, sigwaitinfo and
sigtimedwait called NotImplemented_nid_no_patch.
Now: a process-wide pending set holds signals 1 to 128. A signal raised
while it is blocked stays pending and is delivered when _sigprocmask
unblocks it, taken by sigwait, sigwaitinfo or sigtimedwait, or delivered by
pause, which runs its handler on the calling thread and returns -1 with
EINTR. pthread_kill to another thread leaves the signal pending for
whichever thread waits for it and answers ESRCH for a handle that is not a
live guest thread. sigtimedwait follows FreeBSD's sigtimedwait(2): EAGAIN
on timeout, EINVAL for a tv_nsec outside 0 to 1000000000 while nothing is
pending, and an indefinite wait with a null timeout.
FreeBSD's vfs_kqfilter checks neither the vnode type nor fflags, so the
registration is valid; it is only delivered for a move between directories,
which the Windows directory handle cannot tell from a removal plus an addition.
Also moves the TechnicalDebt entries to docs/dev/debt after main split the file.
Co-Authored-By: Claude <noreply@anthropic.com>
Adrià
Dean
hugodearaujo
screamm
David
Blazing Cook
Aathish
fdfawef324
lorkydey
jagrat Singh
Dean Galvin
Yunus Shaikh
babyhuey
xXPBSXx
DariusHQ
Adrià Franch
MarcZX100
VitzS7