With PA_SC_AA_CONFIG at one sample and MSAA_ENABLE off, the hardware scans
each pixel once and gives every sample of a multisampled color target its
result: radeonsi programs exactly this when GL multisampling is disabled on
a multisampled framebuffer (si_emit_msaa_config leaves sc_aa_config 0), and
GL defines it as single-sample rasterization with full coverage. Such a draw
without depth or alpha-to-coverage now rasterizes the target's sample count
with every sample location at the pixel center, which covers all samples
exactly when the center is covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Goat Simulator 3 draws a triangle list whose indices are all 0xffffffff
with primitive restart off. Each fetch past a descriptor's records reads
zeros (out-of-bounds select 0 or 1), but the zero-padded vertex copies
were sized to the highest index: 160 GiB, which vkAllocateMemory refused.
When the highest index is at least 64Ki vertices past the largest
per-vertex record count, the draw now uses a copy of its indices with
every index past that count moved to it. Each attribute reads zeros
there as at the original index; only the vertex index the shader sees
changes, so indices closer to the records are left as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vulkan's standard 8x sample 7 is (0.9375, 0.0625), (7, -7) in signed sixteenths; the table had (7, -8), so the
standard pattern (PPSA99902's PA_SC_AA_SAMPLE_LOCS words 0xbd153fd1 / 0x9773f95b) was refused as nonstandard.
Regression row with those words.
Reported by @Amoenus.
Co-Authored-By: Amoenus <5391396+Amoenus@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
(cherry picked from commit 9a1a0672cac0f8e3dcaa6e28cbe6b7b684a40a1f)
Vulkan's standard 8x sample 7 is (0.9375, 0.0625), (7, -7) in signed sixteenths; the table had (7, -8), so the
standard pattern (PPSA99902's PA_SC_AA_SAMPLE_LOCS words 0xbd153fd1 / 0x9773f95b) was refused as nonstandard.
Regression row with those words.
Reported by @Amoenus.
Co-Authored-By: Amoenus <5391396+Amoenus@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The duplicate ColorTarget::cmaskAddress, decode and size helper are gone: multisampled targets
use main's cmaskAddress/cmaskBytes (whole metablocks). Single-sample targets keep main's rule
(CMASK under FAST_CLEAR); a multisampled one takes it under FAST_CLEAR or COMPRESSION. A zero
fill of the whole CMASK clears at the next use, 0xFFFFFFFF marks it expanded, any other or
partial fill refuses the next use; eliminate/DCC passes over a multisampled target and a CB
resolve into a fast-clear destination are refused. The draw key adds CMASK_BASE_EXT (0x398),
which main decodes but did not key.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draws with PA_SC_AA_CONFIG multisampling (2, 4 or 8 samples, every target with as many
fragments, the standard sample locations, MSAA_ENABLE) render into host-only multisampled
color images and multisampled depth surfaces; the pipeline rasterizes with that sample
count. A CB_COLOR_CONTROL resolve over a multisampled CB0 runs as a render pass whose
resolve attachment is CB1's resident image. A zero fill over a target's CMASK fast-clears
it to the CB_COLOR_CLEAR_WORD values of its next use. EQAA, coverage conversion,
nonstandard sample locations, sampling a multisampled surface and multisampled mips stay
refused.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A FLAT_SHADE input without pass-through that a pixel shader reads
through v_interp_mov_f32 P10 became an explicit per-vertex input and
read vertex 1 minus vertex 0. With the last provoking vertex the
pipeline then threw ("last provoking vertex with explicit per-vertex
flat interpolation is unsupported"), which stopped all three
ps5-opengl titles in the catalog.
ps5-opengl reads every flat input through P10 when GL's last-vertex
convention is in effect, and its driver passes the GL 4.6 CTS on a PS5
(#1413). Such a read now returns the provoking vertex's value, as P0
does, and only a P20 read keeps a flat input per vertex. The lane was
not measured on the console itself, so FragmentParameter records it
and a pipeline using the first provoking vertex throws.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A rect-list draw whose count is not a multiple of 3 threw "incomplete rect-list
primitive". Rect lists are drawn as patch lists of 3 control points, and Vulkan
generates floor(vertexCount/3) patches, so the draw now records as is and the
trailing 1 or 2 vertices are left out. Palworld (PPSA23126) draws 4 vertices x 9
instances as a rect list when character creation opens (#3832).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DecodeState bound the depth surface whenever DB_DEPTH_CONTROL enabled a
depth, stencil or depth bounds test and either plane was valid. A stencil
test beside a depth-only surface (DB_STENCIL_INFO format invalid, depth
test off) tests nothing, but the surface was still attached and the
render extent was clamped to it. A draw into a 1920x1080 target with a
960x540 depth surface left bound then covered only the top-left quarter.
A test whose plane is present but invalid no longer binds the surface.
Such a draw renders without a depth attachment, as it already does when
both planes are invalid. DrawRejection follows the same rule.
A pixel input whose SPI_PS_INPUT_CNTL offset names a parameter the
previous stage does not export failed validation ("graphics interfaces
disagree"), so the draw threw. No export writes that parameter slot for
the draw. radeonsi programs a pixel input without a matching vertex
output as OFFSET 0x20 with DEFAULT_VAL 0, so that it reads (0, 0, 0, 0)
(SI_PS_INPUT_CNTL_UNUSED in si_shader.h, applied in si_shader.c), and
rect-list draws already pass zero for such inputs.
Before the pixel stage of a draw is prepared, inputs that read a
parameter the previous stage's program does not export now read zero:
OFFSET bit 5 is set, DEFAULT_VAL and FLAT_SHADE are cleared, and an FP16
input also reads zero in its high half (USE_DEFAULT_ATTR1 set,
DEFAULT_VAL_ATTR1 cleared). Inputs that already read a default value
are unchanged.
Fixes#2975.
CB_COLOR_INFO format 17 with UNORM and the standard component swap renders
into VK_FORMAT_A1R5G5B5_UNORM_PACK16, whose attachment and blend support
Vulkan requires. AMD keeps X in the low bits and Vulkan keeps R in the
high bits, so the exports are mapped with X and Z exchanged and the stored
bits follow the guest layout. PPSA06699 renders into this format.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A merged (NGG geometry path) program's user data starts with eight
hidden words, so the vertex buffer and attribute table offsets of its
AGC header, which count from the first user SGPR, were read eight words
too early and found zeros. Killzone: Liberation (PPSA11142) stopped on
`AGC graphics: null vertex buffer table address` at the first frame of
its PSP game. The decoder now adds the hidden word count to the table
reads; the registers reported to the recompiler are unchanged, as it
already maps them from the first user SGPR. `agc_driver_graphics` gains
a merged and a plain layout case.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review follow-up to the 8_8 SWAP_ALT blending. The second channel of
such a target holds the guest's alpha. Vulkan applies the green blend
constant to it for CONSTANT_COLOR and ONE_MINUS_CONSTANT_COLOR, where the
guest's alpha equation uses the alpha constant. Decoding now throws for
these factors on a SWAP_ALT 8_8 target, unless the equation is MIN or
MAX, which ignore factors.
The second pass of a split draw runs every stage again, not only the
pixel shader, so a vertex or geometry stage that writes memory would
write twice. The memory-write check (now ShadersWriteMemory) covers all
the draw's stages.
Formats 4, 5, 6 and 9 (FP16, UNORM16, SNORM16 and 32-bit float ABGR) decode with alpha-to-coverage; formats 1, 2 and 3, which carry no floating-point alpha, still throw.
DecodeShaderStages accepts LS, HS and an NGG passthrough ES, reads the
3-bit VGT_TF_PARAM fields, refuses its other bits but DISTRIBUTION_MODE,
and needs HOS levels that keep [1, 63]; 0x286-0x287 join the draw key.
Local and domain programs are prepared with their stage group: its
headers are merged over one set of defaults, and a local program left
unbound by the hull header is prepared at its first draw.
The local program ends at its jump into the hull half.
TessellationLowering lowers LDS and ring addresses that are affine in
the control point and relative index to tessellation interfaces with
strides from the code, and refuses accesses outside the patch, per-patch
writes from other control points and a modified primitive export. Hull
lanes read their own saved exec bit, also of host-subgroup-masked
copies; other masks are refused, gl_InvocationID loads as a scalar and
factors clamp to 63.
Map red and blue exports, write masks and constant-color blend factors together. Reject conflicting simultaneous target constants.
Semantics: Mesa 26.2.2 src/amd/common/ac_formats.c ac_translate_colorswap; console equivalence remains unverified. Graphics tests passed. Written with AI assistance.
Allocate cached sets without individual-free pools. Reset a pool after its
last owner releases it. Keep stable pool indices, skip full pools, and
terminate if reset fails. No GPU wait is added.
This avoids RADV 26.2.2's affected individual-free allocation path.
Validation: Fedora 44 Release graphics tests pass. The reset-failure
regression fails on the previous behavior and passes on this change.
llvmpipe and RX 6600 pass the 3,301-set lifecycle test with core and
synchronization validation. Windows was not tested.
AI-assisted: yes.
Dean
Achraf Reyani
Adrià
Adrià Franch
Tyler Westerberg
Dean Galvin
Michon
authurtabo-byte
AlxcBTW
Nesyth
Mouhand Kaddo
jweidenh
Daan Dehing
XairRrR
JAB-dev
Mouad-Scriptz-0
Gustavo Ariel Gamarra Rojas
Celegans12
TibixDev