FreeBSD fchdir(2) changes the working directory to the directory referenced by a descriptor. The guest imports fchdir from libkernel_sys (PPSA99764, issue #1578) and the module did not export it.
The descriptor's directory is resolved from the path recorded when the directory was opened on Windows, and from the /proc/self/fd link target on Linux. The guest working directory is then set through the libc routine shared with chdir. A descriptor that is not open returns EBADF and one that is not a directory returns ENOTDIR.
AI-assisted: yes
(cherry picked from commit 76329cbb08781e13d757c3ff955acf71f8bd506f)
`truncate` (`ayrtszI7GBg`) is an absent import of PS5MC (PPSA99420),
XPSemu (PPSA97358) and Porpoise (PPSA99764) on `main`. It resolves
through `sceKernelTruncate`, which now returns `EISDIR` for a directory
and the host errno for other failures instead of `EIO`, as FreeBSD 11
`kern_truncate` does. The guest-relative test `guest_truncate` covers
shrinking, growing with zero fill, a negative length, a missing path,
an empty path, a null path, a directory and a read-only file.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
PSXS5, SwanStationPS5 and Nuvio stop at start-up on setcontext on main,
and EVO Player and ProsperoStore do on Windows. The three are imported
by the statically linked OpenSSL's ASYNC code.
The three use FreeBSD 11's amd64 ucontext_t (mcontext at 0x10, mc_len
800, uc_link at 0x330, 0x370 bytes), which the titles are built
against: EVO Player's ASYNC_is_capable captures into a 0x370-byte stack
buffer, and async_fibre_makecontext sets uc_link at 0x330 and uc_stack
at 0x338. getcontext saves every register at its call in assembly and
stores the context as FreeBSD's sys_getcontext does: rax and rdx as 0,
the carry flag clear, the FXSAVE image and the signal mask, and nothing
from uc_link on. setcontext checks mc_len and mc_flags as set_mcontext
does, installs the signal mask, masks MXCSR with the host's MXCSR_MASK
and returns through iretq, so every general register and the flags are
restored and nothing is written below the target stack pointer.
makecontext follows FreeBSD 11's amd64 libc.
Windows checks guard-page growth and exception unwinding against the
stack bounds in the TEB. setcontext and longjmp now set them to the
stack they switch to, which makecontext registers and pins writable as
libSceFiber does for fiber stacks. OpenSSL enters a context with
setcontext and then switches with _setjmp and _longjmp.
Titles that import it now load; calling it throws like the other
coredump queries, since host crashes are not turned into guest dumps.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
(cherry picked from commit e0e5fd9ffbbaffdc065d1471ce1c91b144af5f98)
(cherry picked from commit 2ac0c88fdbb9e380b6eb5a37d5f98d557940f131)
(cherry picked from commit 1279010b1bc123d3b87664ede15ec6ab2ced806a)
sceKernelGetProcessTime and sceKernelGetProcessTimeCounter measured from
a start captured on their first call, so the first reading was about 0
however long the process had run, and exactly 0 when both reads fell in
one tick of the host clock (100 ns on Windows). Capture the start when
libkernel loads.
Titles that ship their own libc.prx or Unity's PS5Util.prx import
_umtx_op (04AjkP0jO9U) for atomic waits, call_once and futex-style
waits. Implement UMTX_OP_WAIT, UMTX_OP_WAKE, UMTX_OP_WAIT_UINT,
UMTX_OP_WAIT_UINT_PRIVATE and UMTX_OP_WAKE_PRIVATE as FreeBSD 11's
kern_umtx.c does, on the sceKernelSyncOnAddressWait waiter queue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HeC9bA3n74TzJRYv9AgBE8
Two defects found in review of the Linux delivery:
A raise right after scePthreadCreate reached the new thread before
RunThread set currentThread, so scePthreadSelf() in the handler adopted
a second handle, and could deadlock on glibc's thread lock when the
signal interrupted pthread_getattr_np. The creator now blocks all
signals around the std::thread construction, so the child starts with
them blocked, and RunThread restores the creator's mask once the thread
is registered, as libthr does. A raise in that window stays pending and
is delivered just before the entry runs.
A handler that set reserved MXCSR bits made rt_sigreturn fail with
SIGSEGV. The MXCSR the handler leaves is now masked with the frame's
MXCSR_MASK (0xffbf when it reads 0), as FreeBSD's fpusetregs does, on
both platforms; Windows also keeps CONTEXT.MxCsr equal to
FltSave.MxCsr.
guest_raise_exception raises right after each of 50 thread creations and
checks scePthreadSelf() in the handler, and its context round trip sets
a reserved MXCSR bit and FZ and checks that only FZ is kept.
AI-assisted: yes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwJx7AHrSUaMGSpEGhL1Kb
sceKernelRaiseException threw on Linux, so a title whose garbage
collector stops threads with it (Unity's PS5Util raises SIGUSR1 on each
thread and reads mc_rsp from the handler's context) could not run there.
The raise now sends the host SIGUSR1 to the target thread with
pthread_kill. The host handler, installed on first use with SA_SIGINFO
and SA_RESTART, builds the FreeBSD-layout ucontext from the interrupted
registers and the FXSAVE area, calls the guest handler on the target's
own stack and writes the registers back, so the handler's changes reach
the interrupted code, as they do on Windows. errno is left as the
handler leaves it, as libthr does.
A raise on another thread takes the target's join lock with the host
signal blocked and returns ESRCH once the thread has finished, so a
detached thread's pthread_t is never signalled after it exits. The
pthread_t is recorded when the thread is created or adopted. Handlers
are now lock-free atomics, as the host handler reads them.
guest_raise_exception now runs on every platform. It also checks that
r13 and xmm8 reach the handler and that r12 and xmm8 written by the
handler reach the interrupted code.
AI-assisted: yes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwJx7AHrSUaMGSpEGhL1Kb
Forwards _sceUltWaitingQueueResourcePoolCreate and _sceUltSemaphoreCreate to the existing calls, like the other underscore Ult exports. Declares sceNetShowIfconfig, sceNpWebApi2GetMemoryPoolStats, Json::Value::setNullAccessCallBack, kqueue, kevent and one pad call of unknown name without an implementation.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Capture errno before the ENOTDIR lookup, translate EINVAL from a name
under a regular file to ENOTDIR, check the parent only once and strip a
trailing separator before taking it, and split the dense rmdir return.
On Windows mkdir_nid_postfix returned ENOENT and sceKernelMkdir and
sceKernelRmdir returned ENOENT or EIO when a regular file was used as a
directory in the path. FreeBSD mkdir(2) and rmdir(2) return ENOTDIR for
a path component that is not a directory.
FreeBSD's kernel_sigaction rejects SIGKILL and SIGSTOP only for a handler other than SIG_DFL, so signal(9, SIG_DFL) and signal(17, SIG_DFL) succeed. Drop the SIG_ERR rejection, which has no kernel basis and which sigaction does not apply.
signal() returned SIG_ERR with EINVAL for any signal without a host
equivalent, such as SIGHUP, SIGPIPE and SIGUSR1, while sigaction()
accepted them. FreeBSD's signal() is sigaction() with SA_RESTART and fails
only for numbers outside 1..128 and for SIGKILL and SIGSTOP.
Report the thread's affinity mask as a 32-byte FreeBSD cpuset_t, with
FreeBSD 11's errors: ERANGE for any other set size, ESRCH for a null
thread and EFAULT for a null set.
EVO-PLAYER (PPSA99039 v0.11.0) imports it (Jb2uGFMr688) and calls it
once with a 32-byte set on pthread_self().
Relinks the ELF modules of extra directories under the module parent directory. Modules the executable or another module needs start with the executable; the others are initialized when the title loads them with sceKernelLoadStartModule, with its start arguments (Windows: __aps5_guest_initialize export; Linux: left out of DT_NEEDED).
Squashed onto main by the reviewer (history had a merge commit).