sceAgcCbCondWrite writes the 9-dword COND_WRITE packet: poll a memory
dword, compare it masked with the reference, and write a dword to memory
on a match. sceAgcCbCondWriteGetSize returns its 36 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PPSA14632 (Unreal Engine) writes sceAgcCbBranch(mode 1, compare
function 0, mask 0, reference 0) with a then buffer and a null else
buffer of 0 dwords. It leaves the compare address uninitialised, so it
is sometimes only 4-byte aligned. The writer rejected the null else
buffer and the misaligned compare address, and the driver accepted
opcode 0x3f only as the 4-dword INDIRECT_BUFFER, so the 14-dword branch
would have failed at submission.
sceAgcCbBranch no longer checks the compare address of an always-pass
branch, which reads nothing, or the address of a buffer of 0 dwords.
The driver runs the first buffer of an always-pass COND_INDIRECT_BUFFER
in modes 1 and 2 (if-then and if-then-else) in place of the packet. A
comparison, a predicated branch and other modes throw.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sceAgcCbSetShRegistersDirectGetSize and sceAgcCbSetUcRegistersDirectGetSize
return the bytes their writers need when no two registers are adjacent: one
three-word packet per register. Adjacent registers are merged into ranges
and take less. A count whose size does not fit 32 bits throws.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the lines this branch added lose their comments; the commits before
keep them, with the reasoning behind each change, for whoever digs into
that code later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- packet sizes for the existing builders and the tessellation ring
config
- direct register writes and end-of-pipe action data, type and cache
patches
- GS/HS shader halves fused by merging their registers, after Kyty
- jump target patches; reserved jumps are allowed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments in this codebase may only mark technical debt (human-added
only), the end of #endif, and the end of a namespace, per
docs/dev/CONVENTIONS.md. Remove the inline rationale comments added in
the AGC PM4 opcode and shader recompiler robustness commits; the code
itself, the commit history, and the PR description now carry that
context instead.
Notably, Command::WriteMemSemaphore takes the corrected 4-argument
form (address, waitForMailbox, signalType, operation): an earlier
revision of this helper used a different, incompatible argument
order. sceAgc*MemSemaphore callers derive waitForMailbox/signalType
from the low two bits of clientCode, and operation from action
(0 = signal, 1 = wait). This ABI note previously lived as an inline
comment; it is recorded here instead per the no-comments convention.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Fills in guest-facing sceAgc* entry points across Acb/Cb/DcbDraw/DcbFlow/DcbState/Misc
that were still stubbed with NotImplemented_nid_no_patch on current upstream, one layer
below upstream's Recorder rearchitecture:
- Command/Control.{hpp,cpp} (new): WriteJump, WriteRewind, WritePredication,
WriteMemSemaphore helpers shared by the Acb/Dcb entry points below.
- Command/Memory.{hpp,cpp}: WriteCopyData, WriteAtomicMem helpers.
- Acb/Control.cpp: Jump/JumpGetSize, Rewind/RewindGetSize.
- Acb/Dispatch.cpp: DispatchIndirectGetSize.
- Acb/Memory.cpp: AcquireMemGetSize, CopyData(+Size), AtomicMem(+Size),
AtomicGdsGetSize, PrimeUtcl2(+Size).
- Acb/Sync.cpp: CondExec(+Size), WaitOnAddressGetSize, EventWriteGetSize,
QueueEndOfShaderActionGetSize, MemSemaphore.
- Cb/Dispatch.cpp: DispatchGetSize only (sceAgcCbDispatch itself left untouched --
upstream's modifier mask 0xa038u|0x41u there is correct as-is).
- DcbDraw/DrawIndexed.cpp: DrawIndexMultiInstanced(+GetSize), still unimplemented
even after upstream's own indexed-draw work.
- DcbFlow/Control.cpp: Jump, Rewind(+Size), and a real WaitUntilSafeForRendering that
emits AgcDriver::RenderingWaitPacketHeader (recognized by the executor's fence wait
in Driver.cpp) instead of upstream's plain-NOP stub, which the executor does not
special-case.
- DcbFlow/Memory.cpp: AcquireMemGetSize, CopyData(+Size), DmaDataGetSize,
AtomicMem(+Size), AtomicGdsGetSize, WriteDataGetSize.
- DcbFlow/Sync.cpp: CondExec(+Size), WaitOnAddressGetSize,
StallCommandBufferParserGetSize, MemSemaphore.
- DcbState/Predication.cpp: SetPredication only (the file's 3 GetSize functions are
left as upstream's diagnostic stubs, not real fixes).
- Misc/PacketInfo.cpp: sceAgcDcbGetSystemSoftwareVersion.
ABI correction: Command::WriteMemSemaphore takes the corrected 4-argument form
(address, waitForMailbox, signalType, operation). The Acb/DcbFlow sceAgc*MemSemaphore
entry points still expose the older (action, clientCode, address) guest signature;
their bodies now decode `action` into the signal/wait operation and the low two bits
of `clientCode` into signalType/waitForMailbox before calling the corrected helper.
Not ported (already superseded or out of scope per review): WriteMarker/WriteCustomNop/
WriteEventWrite/WriteCondExec/WriteDispatchIndirectAddress (duplicate upstream's
existing Marker/EventWrite/DispatchIndirect logic), Acb DmaData/DmaDataGetSize/
WriteData/EventWrite (already implemented upstream), DcbFlow EventWrite(+Size)
(upstream's version handles the 8-byte occlusion-address case more completely),
DcbDraw's other DrawIndex* entry points (already implemented upstream),
Misc/Trinity.cpp, Patch/WriteData.cpp, DcbState/Marker.cpp (all superseded by
upstream equivalents).
Brings in main up to 9958d26 (homebrew runtime, POSIX wrappers in
libkernel, sce_module guest modules and --skip-sce-module, the --to-intel
general pipeline, libSceRandom, libSceRtc, libScePosixForWebKit,
libRenoirCore, test wiring).
Resolutions where both sides implemented the same thing:
- libkernel pthread: main's structure (lazy static initialisation,
destroyed markers, MutexOperations/CondOperations, mutex protocol and
condattr clock) with this branch's TimedWait deadlines and condition
(precise timed lock/wait on Windows), wait tracing, the adaptive mutex
type 4, POSIX default ERRORCHECK mutexes, EDEADLK/EPERM results instead
of throws, and condition clocks honoured for absolute timeouts.
- libc locale: the guest Dinkumware ABI (_Locimp, facet vtables, short
ctype/case tables, locale ids, stream storage) is kept because guest code
inlines those layouts; main's C character functions are kept on top.
- libc stdio/strings/math: main's stream functions (guest FILE status
sync), strerror/perror, remove, formatting, string and math exports win
over this branch's duplicates.
- libc paths: main's working directory with this branch's path aliases
resolved on the normalised guest path.
- libkernel file: this branch's sceKernel* results as SCE errors, main's
POSIX wrappers and both fstat helpers.
- relinker: this branch's stub lowering keeps its trampolines through the
main executable path; guest modules refuse lowerings that need stubs.
- AGC driver: main's rendering wait is executed by this branch's workers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177gthrWEBBfBu5xJDXgBfo
The SDK's inline release wrapper passes gdsOffset 0 and gdsSize 1 for
every release, not only GDS ones. The packet ignores the range unless the
GDS data selector is used, so accept that default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adrià
hugodearaujo
alfalfa-star
DotDebian
STL1te
OverkillLabs
devilismyfriend
Pacuka
boykopovar