sceAgcDcbSetWorkloadsActive writes an 18-dword IT_NOP packet (stream id, 64-bit workload mask) and sceAgcDcbSetWorkloadComplete a 12-dword one (stream id, workload id, 64-bit clear mask), following KytyPS5. Both return null for a null buffer, an unregistered or out-of-range stream, a workload id above 63, and for active a duplicate id or a count of 0 or above 63. sceAgcDriverRegisterWorkloadStream and sceAgcDriverUnregisterWorkloadStream now record the stream ids the DCB calls check.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
sceAgcDcbSetWorkloadsActive and sceAgcDcbSetWorkloadComplete threw. They now write a plain two-dword NOP and keep no workload state.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Eight libSceAgc exports were published under a raw NID with a made-up
name. Each NID is the hash of a versioned SDK name (checked with
tools/nid_names.py compute_nid), so the functions now carry that name and
are exported from it directly:
23LRUSvYu1M sceAgcUnknownInitState -> sceAgcInit_0090
-KRzWekV120 sceAgcUnknown__MKRzWekV120 -> sceAgcDcbSetIndexSize_0600
Ikfdt-rIqCE sceAgcUnknown_Ikfdt_MrIqCE -> sceAgcJumpPatchSetTarget_0300
7Wa3aeJgeVU sceAgcUnknown_7Wa3aeJgeVU -> sceAgcBranchPatchSetThenTarget_0300
rP5xLdOf26k sceAgcUnknown_rP5xLdOf26k -> sceAgcBranchPatchSetElseTarget_0300
fd5Bp5tGTgo sceAgcUnknownFuseShaderHalves -> sceAgcFuseShaderHalves_0200
qj7QZpgr9Uw sceAgcDcbContextStateAnotherOp -> sceAgcDcbContextStateOp_0100
k0E7vkgqAuE sceAgcCreateInterpolantMappingVsPs -> sceAgcUpdateInterpolantMapping_0100
The exported NIDs are unchanged; the extra exports under the hashes of the
made-up names are gone. Behaviour is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Write SET_CONFIG_REG (0x68) packets like the context, shader and user
config register setters: one register from a ShaderRegister, or a range
of values at an offset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The end-of-shader action is written by an inline SDK builder as a
RELEASE_MEM packet, so the size is the 32 bytes that
sceAgcCbReleaseMem writes and that sceAgcAcbQueueEndOfShaderActionGetSize
already returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DCB variant threw "not implemented" while the ACB one wrote a
5-dword packet. Both now go through Agc::Command::WritePrimeUtcl2 and
the size query returns 20 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sceAgcSetPacketPredication sets or clears the predicate bit of a type-3
packet header, and sceAgcSetRangePredication does so for every type-3
packet between two addresses, skipping type-2 fillers. The z-pass, bool
and disable predication size queries return the size of the
SET_PREDICATION packet sceAgcDcbSetPredication writes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments in this codebase may only mark technical debt (human-added
only), the end of #endif, and the end of a namespace, per
docs/dev/CONVENTIONS.md. Remove the inline rationale comments added in
the AGC PM4 opcode and shader recompiler robustness commits; the code
itself, the commit history, and the PR description now carry that
context instead.
Notably, Command::WriteMemSemaphore takes the corrected 4-argument
form (address, waitForMailbox, signalType, operation): an earlier
revision of this helper used a different, incompatible argument
order. sceAgc*MemSemaphore callers derive waitForMailbox/signalType
from the low two bits of clientCode, and operation from action
(0 = signal, 1 = wait). This ABI note previously lived as an inline
comment; it is recorded here instead per the no-comments convention.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Fills in guest-facing sceAgc* entry points across Acb/Cb/DcbDraw/DcbFlow/DcbState/Misc
that were still stubbed with NotImplemented_nid_no_patch on current upstream, one layer
below upstream's Recorder rearchitecture:
- Command/Control.{hpp,cpp} (new): WriteJump, WriteRewind, WritePredication,
WriteMemSemaphore helpers shared by the Acb/Dcb entry points below.
- Command/Memory.{hpp,cpp}: WriteCopyData, WriteAtomicMem helpers.
- Acb/Control.cpp: Jump/JumpGetSize, Rewind/RewindGetSize.
- Acb/Dispatch.cpp: DispatchIndirectGetSize.
- Acb/Memory.cpp: AcquireMemGetSize, CopyData(+Size), AtomicMem(+Size),
AtomicGdsGetSize, PrimeUtcl2(+Size).
- Acb/Sync.cpp: CondExec(+Size), WaitOnAddressGetSize, EventWriteGetSize,
QueueEndOfShaderActionGetSize, MemSemaphore.
- Cb/Dispatch.cpp: DispatchGetSize only (sceAgcCbDispatch itself left untouched --
upstream's modifier mask 0xa038u|0x41u there is correct as-is).
- DcbDraw/DrawIndexed.cpp: DrawIndexMultiInstanced(+GetSize), still unimplemented
even after upstream's own indexed-draw work.
- DcbFlow/Control.cpp: Jump, Rewind(+Size), and a real WaitUntilSafeForRendering that
emits AgcDriver::RenderingWaitPacketHeader (recognized by the executor's fence wait
in Driver.cpp) instead of upstream's plain-NOP stub, which the executor does not
special-case.
- DcbFlow/Memory.cpp: AcquireMemGetSize, CopyData(+Size), DmaDataGetSize,
AtomicMem(+Size), AtomicGdsGetSize, WriteDataGetSize.
- DcbFlow/Sync.cpp: CondExec(+Size), WaitOnAddressGetSize,
StallCommandBufferParserGetSize, MemSemaphore.
- DcbState/Predication.cpp: SetPredication only (the file's 3 GetSize functions are
left as upstream's diagnostic stubs, not real fixes).
- Misc/PacketInfo.cpp: sceAgcDcbGetSystemSoftwareVersion.
ABI correction: Command::WriteMemSemaphore takes the corrected 4-argument form
(address, waitForMailbox, signalType, operation). The Acb/DcbFlow sceAgc*MemSemaphore
entry points still expose the older (action, clientCode, address) guest signature;
their bodies now decode `action` into the signal/wait operation and the low two bits
of `clientCode` into signalType/waitForMailbox before calling the corrected helper.
Not ported (already superseded or out of scope per review): WriteMarker/WriteCustomNop/
WriteEventWrite/WriteCondExec/WriteDispatchIndirectAddress (duplicate upstream's
existing Marker/EventWrite/DispatchIndirect logic), Acb DmaData/DmaDataGetSize/
WriteData/EventWrite (already implemented upstream), DcbFlow EventWrite(+Size)
(upstream's version handles the 8-byte occlusion-address case more completely),
DcbDraw's other DrawIndex* entry points (already implemented upstream),
Misc/Trinity.cpp, Patch/WriteData.cpp, DcbState/Marker.cpp (all superseded by
upstream equivalents).
xXPBSXx
Chad
ploysius
Dean
hugodearaujo
Nicolas Abosch
Adrià Franch
DotDebian
carman24r
OverkillLabs
Dean Galvin
devilismyfriend
boykopovar