PokeMMO Prospero (PPSA98001) stops at siglongjmp (pebqbE5ws8s) from
libkernel. The title links its own FreeBSD sigsetjmp, so siglongjmp
follows FreeBSD's amd64 __siglongjmp and its sigjmp_buf layout: when the
save-mask flag at offset 88 is set it restores the mask saved at 72
through _sigprocmask, then reloads rbx, rsp, rbp, r12-r15 and the x87
control word and returns to the saved address with val, or 1 for 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FreeBSD's unlink ignores the file's own permission bits, so it succeeds
on a file the guest made read-only with chmod(0400). On Windows the guest
chmod sets the read-only attribute and _wunlink then failed with EACCES,
which sceKernelUnlink and unlink reported. When the path is a regular file
without write permission, make it writable before the single _wunlink and
restore the read-only attribute if the unlink fails, as remove() does
since #2342.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The mutex attribute now keeps its protocol and priority ceiling the way
FreeBSD's libthr does: the ceiling can be set and read only under
PTHREAD_PRIO_PROTECT (EINVAL otherwise), and setting a protocol resets it
to the highest SCHED_RR priority. Mutexes still do not apply priority
protection; that is listed as a silent stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit d10c024f8fdbcdfced0187550f272333264f07df)
A map without MAP_FIXED whose hint lies wholly inside a range still
reserved by sceKernelReserveVirtualRange is placed at the hint, as a fixed
map into the reservation would be. Hints outside reservations and ranges
that are partly mapped keep their hint behaviour. The reservation is
checked under the registry mutation, so it cannot be released and its
address reused between the check and the map (MarcZX100, #2687).
Fixes#2687
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A2cY3SsTYnh4u4ZtEr2Adx
A guest path whose bytes the host cannot convert to a native path made
ResolvePath throw std::filesystem::filesystem_error, which aborted the
process. No file can have such a name on the host, so stat reports
ENOENT, as for any other missing file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sceKernelSignalSema threw invalid_argument for a count of 0. Marvel's
Wolverine (PPSA03671) signals with a count computed as min(a, b) - c,
which can be 0, and ignores the result, so the throw ended the title a
few minutes in. A zero count now adds no tokens and returns SCE_OK, as
in shadPS4 and Kyty. A null semaphore and a negative count still throw.
guest_kernel_errors signals 0 on a full and on an empty semaphore and
checks that the count is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 7191d34c4d79622ba71087f0da2b75eb81ad2c23)
Add the guest socket descriptor guard to sceKernelFdatasync before any
native syscall, matching the existing sceKernelFchmod pattern. This
prevents high guest socket descriptors (e.g. 0x10000000) from reaching
the Windows CRT _commit, which would trigger the invalid-parameter
handler, and ensures the correct SCE error is returned on all platforms.
Refactor fdatasync_nid_postfix to delegate to sceKernelFdatasync via
PosixResult, removing the duplicated socket guard and native syscall.
Extend GuestFilesystem tests to cover:
- sceKernelFdatasync on a valid guest socket returns SCE EINVAL (0x80020016)
- sceKernelFdatasync on a closed guest socket returns SCE EBADF (0x80020009)
- sceKernelFdatasync on a high invalid descriptor (0x7fffffff) returns SCE EBADF
- closed-ordinary-descriptor tests now run on Windows (verified _commit on
a closed descriptor returns EBADF without provoking the CRT handler)
Without MAP_FIXED the address is a hint, as for FreeBSD's mmap: the reservation goes at the hint when that range is free, else at the first free range above it. The hint was dropped, so every hinted reservation landed at the lowest free address.
RetroArch (PPSA99169) reserves its cores' direct-memory heap near 0x2000000000 outside the GPU window (0x200000000-0x300000000) and refuses a range inside it; with every reservation at 0x200400000 the heap was never made, and Dolphin's first aligned allocation returned null.
AI-assisted (Claude Code).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Windows sceKernelPread stopped going through pread when it learned to
return errors, and with it lost the random device read, so a pread on
/dev/urandom reached ReadFile on a handle that is not a disk and failed
with ESPIPE. Read random devices first, as the Linux path does.
A pread into a read-only guest mapping now returns EFAULT instead of
throwing, matching Linux and the AIO read beside it, so the Windows
guest memory test checks for that return.
An unmapped range inside the guest arena stays a PROT_NONE host
reservation, so host munlock succeeds on it. Check the guest mapping
state first, as msync does, and return ENOMEM for ranges the guest
has not mapped or reserved.
The arena constructor was Windows-only, so on Linux Available() was false: the guest heap fell back to the host allocator and direct memory landed wherever the kernel pleased. Titles that require a low virtual address rejected the mapping and re-issued the identical request, which surfaced as a start-up assert inside their own allocator.
Seed the window from the mappings that already exist instead of reserving it up front, because a PROT_NONE reservation of the whole range starves the kernel's own top-down mmap, which picks addresses just below the stack inside that range. Commit, reset and set-protection become portable so the arena owns its used ranges on both platforms, and fixed mappings are checked against the arena's used ranges rather than against EEXIST from a reservation.
The window-placement and no-overwrite checks in guest_memory were compiled only for Windows; they now run on Linux too, and the window check fails without this change.
Fixes#692
Since guest threads get exactly the stack size they request, host code
that a guest thread calls runs on that small stack too. sceAgcCreateShader
reaches Driver::RegisterShader, whose frame alone is about 50 KiB, so a
title whose job threads ask for 48 KiB overflows the stack (#2603).
Each guest thread now gets a fixed 1 MiB of host stack below the range it
asked for. The guest still sees the requested size and address range
through scePthreadAttrGet and sceKernelIsStack; only host calls made from
the thread use the extra room. Running the prepared-shader driver tests on
a limited main-thread stack needs between 128 and 192 KiB for shader
registration, Vulkan setup included, so 1 MiB leaves several times that.
Switching to a separate host stack at each HLE entry point would need a
trampoline on every export that may go deep, handling of stack-passed
arguments and unwinding across the switch, and a list of which exports
qualify. A margin below the guest range covers every host call with no
per-export list.
On Windows the committed size was the requested size, and the margin
below it depended on the executable's default stack reserve; requests at
or above that reserve had none. The commit now includes the same margin.
macOS does not run guest threads.
guest_pthread_stack now also calls host code that uses 256 KiB of stack
below each thread's guest range; without the margin it crashes on the
16 KiB thread.
Fixes#2603
scePthreadCancel and pthread_cancel threw, scePthreadTestcancel did
nothing and the cleanup handler exports did not exist.
A cancel request is now recorded on the thread and acted on at
scePthreadTestcancel, the condition variable waits, scePthreadSem and
sem waits, scePthreadJoin and the sleeps, and under their POSIX names.
A thread blocked in one of the waits is woken; a condition wait takes
its mutex back before the thread exits. The thread exits with
PTHREAD_CANCELED through scePthreadExit, which now runs the handlers
of __pthread_cleanup_push_imp and __pthread_cleanup_pop_imp.
scePthreadSetcancelstate and scePthreadSetcanceltype reject unknown
values, and pthread_setcanceltype is added.
Constants, the handler node layout and the order of events follow
FreeBSD libthr. A sleep is not interrupted, file and socket calls are
not cancellation points and the asynchronous type acts like the
deferred one except at the two set calls (TechnicalDebt). New test:
guest_pthread_cancel.
Leave the Windows identity fields at their stat values when
GetFileInformationByHandle fails on a handle whose basic information
could be read, instead of failing the whole call.
st_ino was always 0 and st_dev differed between stat (drive number) and
fstat (0), so the usual a.st_dev == b.st_dev && a.st_ino == b.st_ino
identity check gave wrong answers. Read the volume serial, the file index
and the link count from the file handle, which works the same for path and
descriptor lookups.
Fixes#2296
ProsperoStore (PPSA99000) imports kill from libkernel and stops at it on
current main. Its crash reporter resets a crash signal to SIG_DFL and
sends it again with kill(getpid(), signal).
kill follows FreeBSD's kern_kill and killpg1 for the only guest process:
EINVAL for signals outside 0 to 128, signal 0 only checks the target,
and the caller's own pid, 0 and minus its pid deliver through raise.
Any other pid, and -1, which skips the caller, report ESRCH.
The registry records whether a range was mapped or protected with GPU
access (0x10/0x20), and an address-based build leaves out ranges without
it, as the console's GPU page tables do. The main image is registered
without GPU access; the title's own mprotect with GPU bits adds it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
David
Adrià
Dean
Hannah Lyons
Achraf Reyani
ps54all
LeandroLP23
Renan Pires
MathiasDevelopes
Lexroid
Tharun Balaji
Scott Schuster
virp-mta
Dean Galvin
jeffrey12cali
Nicolas Abosch
Hussein Kadhim
overlordxrz-source
raghav314