* Draw object transparency on screen, in exports and in plots
Transparency was read and saved (entity group 440, layer xdata, ByLayer and
ByBlock) but never drawn. Display lists now carry each object's effective
transparency (its own, its layer's, or the block reference's), and:
- the canvas (GPU and CPU paths), ui.render and PNG/SVG exports blend it;
TRANSPARENCYDISPLAY turns it off on screen and is now on by default, as in
AutoCAD (initial value 1);
- plots draw it only when "Plot transparency" is on: a page setup option
(PAGESETUP `plotTransparency`, a checkbox in the Page Setup Manager and the
Plot dialog), overridable per plot, with PLOTTRANSPARENCYOVERRIDE (0 never,
1 the setting, 2 always). PDF gets /ExtGState alpha, PNG plots blend, SVG
uses opacity. Plots without it are byte-identical to before.
The public DXF Reference has no plot layout flag for plot transparency, so
the option is kept in the session and in JSON, not in DXF/DWG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Transparency fixes: attributes, PDF overlaps, drag previews
- Attributes draw with their own transparency (their definition's, layer 0
meaning the reference's layer, ByBlock the reference's) instead of the
block reference's.
- PDF plots stroke overlapping transparent objects one by one, so they build
up where they cross as in PNG plots; opaque output is unchanged.
- Drag and rubber-band previews follow TRANSPARENCYDISPLAY.
- Effective transparency is worked out only when it is drawn, reusing the
layer the property lookup already found.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Transparency: one PDF stroke per transparent primitive; opaque rebuilt previews
- PDF plots never batch two transparent primitives into one path. Block and
viewport contents share their reference's handle, so the per-object flush
missed them; each primitive now blends on its own, as in PNG plots and on
screen. Opaque output is unchanged.
- Previews the session rebuilds with the current properties (rubber bands,
copies of objects) are drawn opaque again: they carry CLAYER's
transparency, not the objects'. The GPU drag of the objects themselves
keeps following TRANSPARENCYDISPLAY.
- Tests for attributes on a transparent reference layer, attributes without a
definition, and the drag cache across the TRANSPARENCYDISPLAY toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection like AutoCAD: colour highlight and the Options Selection tab
Selecting or hovering an object outlined each filled primitive (TrueType
glyphs, dimension and leader arrowheads, solid hatches, wide polylines)
by the rectangle around its triangles, and dashed everything else. A
selected dimension's text became a row of dashed boxes, one per glyph,
and its closed arrowheads small rectangles.
Selected objects are now redrawn in the selection colour: lines solid,
fills filled half see-through (so the lines and text on a highlighted
hatch stay visible), and the whole object reads as selected, text and
arrowheads included. A wipeout is always outlined, since filling it would
hide the drawing under it.
The Options dialog's Selection tab is laid out as AutoCAD's, with the
settings CADCraft can act on, each one AutoCAD's variable, kept in the
user profile:
- Selection modes: noun/verb selection (PICKFIRST), Shift to add
(PICKADD), Object grouping (PICKSTYLE bit 1, now saved in the profile).
- Selection effect color (selectionColor, an interface preference; null
is the theme's).
- Grips: Show grips (GRIPS) and the object selection limit for display of
grips (GRIPOBJLIMIT, 100; 0 no limit): grips are neither drawn nor
picked beyond it.
- Selection preview (SELECTIONPREVIEW): the object under the cursor is
highlighted when a command is active (2) and when none is (1).
- Visual Effect Settings: the selection area effect (SELECTIONAREA,
WINDOWAREACOLOR 150, CROSSINGAREACOLOR 100, SELECTIONAREAOPACITY 25)
and the Selection Preview Filter (PREVIEWFILTER 3: 1 objects on locked
layers, 2 xrefs, 4 tables, 8 multiline text, 16 hatches, 32 groups).
As in AutoCAD these are typed, not on the dialog: HIGHLIGHT (0 shows only
the grips of selected objects; not saved, so every session starts
highlighted), SELECTIONEFFECT (1 the selection colour, 0 dashed lines with
fills outlined along their real boundary) and PREVIEWEFFECT (the preview
dashed 0, thicker 1 or both 2).
Left for later, as CADCraft lacks what they control: lasso, grip tips and
menus, group grips, grips within blocks, associative hatch selection,
command and property preview, PICKDRAG, PICKAUTO and PROPOBJLIMIT.
DisplayList::fill_outlines returns the boundary of the region a filled
primitive covers as closed polylines (edges only one triangle has; the
slab filler's horizontal cuts, which need not line up between trapezoids,
are split at every x on their line and kept where an odd number cover
them), falling back to the bounding box over 600,000 vertices. The GPU
and CPU highlight paths and the drawing comparison overlay share the same
looks.
The new labels have Ukrainian rows (the required catalog); other
languages fall back to English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: EP995LAB <293597958+EP995LAB@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Multiline attributes: read, draw and save their text
A multiline attribute (DXF attribute type 2, or 4 for a definition) has its
text as embedded MTEXT after its own groups (`101 Embedded Object`); its own
group 1 is empty. CADCraft read only the own groups, so the attribute drew
nothing, and a save wrote it back empty: its text was lost.
- `Attrib::multiline` keeps the multiline text; `text.value` holds its plain
text, which ATTEDIT and the other value editors change; an edited value
replaces the contents (`Attrib::multiline_text`).
- DXF read: ATTRIB and ATTDEF split at the marker; the MTEXT parsing is
shared with MTEXT entities (`mtext_from`).
- Drawn as multiline text; ZOOM Extents counts it.
- DXF write (2007 and later; earlier versions get one line): attribute type,
alignment point and the embedded MTEXT, only what differs from unrotated
text, as AutoCAD writes it.
- INSERT and ATTSYNC give references the definition's multiline text placed
with them; MOVE/ROTATE/SCALE, Properties rotation and scale, annotative
scaling and FLATTEN carry it.
- Tests: synthetic multiline ATTDEF and ATTRIB (read, drawn, saved, edited,
pre-2007 save, damaged embedded groups); engine INSERT, MOVE, ATTEDIT and
ATTSYNC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Multiline attributes: read MTEXT direction from its own groups (#667, as #834 does)
#834 moves these lines' fix into the MTEXT reader; the same fix in the shared
mtext_from keeps the two compatible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Attributes keep Verify, Preset and Lock position
ATTDEF/ATTRIB flags 4 (verify) and 8 (preset) and Lock position (group 280
after the tag, DXF 2007 and later) were dropped on save. Without Lock
position AutoCAD lets an attribute be dragged out of its reference, and its
dynamic block actions no longer carry it. A reference's attributes take Lock
position from their definitions, as AutoCAD saves them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Multiline attributes: read, draw and save their text
A multiline attribute (DXF attribute type 2, or 4 for a definition) has its
text as embedded MTEXT after its own groups (`101 Embedded Object`); its own
group 1 is empty. CADCraft read only the own groups, so the attribute drew
nothing, and a save wrote it back empty: its text was lost.
- `Attrib::multiline` keeps the multiline text; `text.value` holds its plain
text, which ATTEDIT and the other value editors change; an edited value
replaces the contents (`Attrib::multiline_text`).
- DXF read: ATTRIB and ATTDEF split at the marker; the MTEXT parsing is
shared with MTEXT entities (`mtext_from`).
- Drawn as multiline text; ZOOM Extents counts it.
- DXF write (2007 and later; earlier versions get one line): attribute type,
alignment point and the embedded MTEXT, only what differs from unrotated
text, as AutoCAD writes it.
- INSERT and ATTSYNC give references the definition's multiline text placed
with them; MOVE/ROTATE/SCALE, Properties rotation and scale, annotative
scaling and FLATTEN carry it.
- Tests: synthetic multiline ATTDEF and ATTRIB (read, drawn, saved, edited,
pre-2007 save, damaged embedded groups); engine INSERT, MOVE, ATTEDIT and
ATTSYNC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Multiline attributes: read MTEXT direction from its own groups (#667, as #834 does)
#834 moves these lines' fix into the MTEXT reader; the same fix in the shared
mtext_from keeps the two compatible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: distances, positions, stretch and move actions, lookup chaining
Linear distances (snapped to their value sets) and point positions can be
changed; the stretch and move actions that follow them run (listed vertices
or whole objects, multiplier and angle offset), parameters in an action's
selection are carried along, associative hatches refill from their
stretched outlines and the reference's attributes move with their
definitions. Lookup tables run both ways (a changed input gives its table's
lookup value, which sets the other tables' inputs). Connections are read in
either group order. Checked against AutoCAD's own references (*U10, *U12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: record changes in the history as AutoCAD does; full value data for new references
A changed reference's ACAD_ENHANCEDBLOCKHISTORY says what was done to it: a
visibility state or lookup value by property name, a distance or position as
the drag of its grips (GRIPLOC, how far each grip is from where the dynamic
block has it). A reference that had no data gets a record for everything
other references of the same dynamic block have, with its own values.
Templates come only from references of the same dynamic block; anonymous
copies have no units; boundary reactors follow the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: record only the grips a change moves
AutoCAD's history holds the user's own drags; a grip that only moved with
another parameter (a stretch carrying it) gets no entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: a distance by name, as typed in Properties
AutoCAD records a distance typed in Properties as the parameter's name and
value in block units (1071 id, 300 Distance2, 40 40.0), replacing drags of
its grips; positions stay grip drags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block grips: show and drag a dynamic reference's grips as AutoCAD does
A selected dynamic block reference shows its grips: an arrow at each end of a
distance, a square at a position, a down-pointing triangle for a visibility
or lookup list, only those its visibility state lists. Dragging an arrow
changes the distance along the parameter (snapped to its values; a typed
number sets it), a square moves the position, a list grip offers its
choices; actions and lookups follow, with a live preview.
doc: dynblock::grips, drag_grip; grip objects by graph id.
engine: blocks.reference.grips, blocks.reference.grip, Session::start_dyn_grip.
ui: canvas dynamic grips (GRIPDYNCOLOR-like token), list popup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: read the shared DOOR fixture with LF line ends whatever the checkout gives
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic grips: Ukrainian labels for the new commands; copy the hot grip instead of cloning
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: distances, positions, stretch and move actions, lookup chaining
Linear distances (snapped to their value sets) and point positions can be
changed; the stretch and move actions that follow them run (listed vertices
or whole objects, multiplier and angle offset), parameters in an action's
selection are carried along, associative hatches refill from their
stretched outlines and the reference's attributes move with their
definitions. Lookup tables run both ways (a changed input gives its table's
lookup value, which sets the other tables' inputs). Connections are read in
either group order. Checked against AutoCAD's own references (*U10, *U12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: record changes in the history as AutoCAD does; full value data for new references
A changed reference's ACAD_ENHANCEDBLOCKHISTORY says what was done to it: a
visibility state or lookup value by property name, a distance or position as
the drag of its grips (GRIPLOC, how far each grip is from where the dynamic
block has it). A reference that had no data gets a record for everything
other references of the same dynamic block have, with its own values.
Templates come only from references of the same dynamic block; anonymous
copies have no units; boundary reactors follow the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: record only the grips a change moves
AutoCAD's history holds the user's own drags; a grip that only moved with
another parameter (a stretch carrying it) gets no entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: a distance by name, as typed in Properties
AutoCAD records a distance typed in Properties as the parameter's name and
value in block units (1071 id, 300 Distance2, 40 40.0), replacing drags of
its grips; positions stay grip drags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: a work budget on the record cursor, so counts promising missing groups can't make nested loops rescan a hostile record (with regression test)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Bump acadrust to 0.6.4 and read DWG in its failsafe mode: an object
record the reader can't decode is skipped instead of failing the whole
file. The drawing's new read_notes (never saved) say how many records
were left out and of which types; OPEN echoes them, returns them as
`warnings`, and the app shows the first in the status bar. A file whose
objects stream can't be read at all is still an error.
acadrust 0.6.4 writes a merged table cell's anchor with 173=0 and the
span, so the DXF reader now takes a merge from the span alone. Unknown
records the DWG writer can't write back are dropped before writing.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* doc: Space::is_paper/layout/tab_name helpers replace hand-written matches
Twenty-seven call sites in 15 files across engine, io and ui-egui matched Space by hand to get
"is this a layout", "which layout" or "Model or the layout's name". Route them
through three small helpers on Space instead. No behaviour change.
This also makes adding a space kind a few-file change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: keep Space::Model comparisons that no helper shortens; test the helpers
Only the sites that repeated the same match (tab name, layout name,
paper lineweights) go through the helpers; plain Model comparisons and
plot_window's match on (space, plotArea) stay as they were.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Other applications' xdata on an entity was kept beside the drawing,
keyed by handle, so a copy (new handle) lost it: a copied hyperlink
(PE_URL) had no link, third-party tags stayed on the original only.
In AutoCAD xdata is part of the object.
Move entity xdata onto the entity as Common::xdata (the same raw
groups); every copy path already clones Common. The DXF reader puts it
there (handle references still noted for remapping), the writer takes
it from the entity, PDF hyperlinks come from the entities. EXPLODE's
pieces of an object don't inherit its xdata. Table record and block
xdata stay in Foreign.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* REFEDIT, REFSET and REFCLOSE: edit block references in place (#813)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move REFEDIT translation lines into the middle of the catalogs (avoids PR merge conflicts)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
From AutoCAD 2013 on, a 3DSOLID, REGION or BODY doesn't carry its ACIS
geometry: the binary SAB lives in the file's data store section (ACDSDATA),
one ACDSRECORD per entity bound by a 320 handle. CADCraft kept those
entities (as unknown entities, with their handles) but dropped the section,
so a drawing saved as DWG or DXF had empty solids, and saving reported them
as not saved.
- doc: Foreign::data_store keeps the section's groups as read;
data_store_entities() lists the entities it has records for.
- io: the reader keeps the section; the writer puts it back for files of
2013 and later (and in the DXF the DWG bridge converts, which acadrust
reads into the DWG), without the records of entities no longer written.
Nothing is written for older files or when no record's entity remains.
- engine: not_saved_as(d, version): from 2013 a solid, region or body with a
data store record isn't reported; saves and document.bytes pass the version
being written.
On a 39,600-object permit set with 625 3D solids and 2 regions, DWG ->
CADCraft -> DWG now keeps all 627 bodies with byte-identical SAB (before:
none), and the save no longer reports them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Layers and objects get a PlotStyle property (ByLayer/ByBlock/name) applied
through named tables (built-in default.stb and monochrome.stb, our own
definitions). DXF keeps the names in the ACAD_PLOTSTYLENAME dictionary of
ACDBPLACEHOLDER objects with group 390 on layers and objects; tables kept in
the drawing travel in a CADCRAFT_PLOTSTYLES XRECORD. PLOTSTYLE sets an object's
or the current (CPLOTSTYLE) style; STYLESMANAGER lists, creates, edits, deletes,
loads and saves tables in our own JSON format (docs/plot-styles.md). A Plot
Style Manager dialog edits a table's styles and the layout's table; the
Properties palette shows the current plot style and table.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
MLEADER's Options answered "not available yet" for Leader type sPline and
None and for Content type Block. Spline leaders now draw as smooth curves
through their points (DXF LEADER path type 72 = 1); None places only the
content at one picked point; Block asks for a block name and how it
attaches (Center extents or Insertion point) and inserts it at the end of
the landing. MLeader gains `spline` and `block` (serde defaults); DXF stays
LEADER + MTEXT/INSERT. PURGE, RENAME, copy/paste, FLATTEN, grips and
extents follow the block content. The choices are remembered like the
other MLEADER options. docs/gaps.md: top-10 row 5, F1 and F10 narrowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SPLINE's Knots, Object, start/end Tangency and toLerance options printed
"not available yet". Fit-point splines now take a knot parametrisation
(chord, square root, uniform), end tangents (clamped cubic with derivative
constraints) and a fit tolerance (least-squares approximation with the
fewest control points that stay within it). The spline keeps these options
so grip and SPLINEDIT edits refit the same way; DXF writes the tolerance
(44) and tangents (12/13) and recovers the parametrisation from the knots.
Object turns 2D/3D polylines with straight segments (PEDIT Spline output)
into splines through their vertices.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The options at MTEXT's "Specify opposite corner" prompt printed "not
available yet". Each now asks its question and returns to the corner
prompt: Height (also sets TEXTSIZE), Justify (TL..BR, the insertion point
is the box's attachment point), Line spacing (At least/Exactly, then a
factor such as 1.5x or a distance), Rotation (picked, or typed through the
drawing's angle settings; the box turns with it), Style (? lists them),
Width (replaces the opposite corner) and Columns (No; Dynamic and Static
say columns are not available yet). MText stores the line spacing style
(DXF group 73) so Exactly round-trips.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
EP995LAB
codyvogt
Marco Arnulfo
aldozar
mattlafy
Valentin Klein
PedroGuille
MarekSpodBiedry