Layers and objects get a PlotStyle property (ByLayer/ByBlock/name) applied
through named tables (built-in default.stb and monochrome.stb, our own
definitions). DXF keeps the names in the ACAD_PLOTSTYLENAME dictionary of
ACDBPLACEHOLDER objects with group 390 on layers and objects; tables kept in
the drawing travel in a CADCRAFT_PLOTSTYLES XRECORD. PLOTSTYLE sets an object's
or the current (CPLOTSTYLE) style; STYLESMANAGER lists, creates, edits, deletes,
loads and saves tables in our own JSON format (docs/plot-styles.md). A Plot
Style Manager dialog edits a table's styles and the layout's table; the
Properties palette shows the current plot style and table.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
MLEADER's Options answered "not available yet" for Leader type sPline and
None and for Content type Block. Spline leaders now draw as smooth curves
through their points (DXF LEADER path type 72 = 1); None places only the
content at one picked point; Block asks for a block name and how it
attaches (Center extents or Insertion point) and inserts it at the end of
the landing. MLeader gains `spline` and `block` (serde defaults); DXF stays
LEADER + MTEXT/INSERT. PURGE, RENAME, copy/paste, FLATTEN, grips and
extents follow the block content. The choices are remembered like the
other MLEADER options. docs/gaps.md: top-10 row 5, F1 and F10 narrowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A PlotStyleTable model in doc with our own built-in tables (default.ctb keeps
object properties, monochrome.ctb prints black, grayscale.ctb prints the grey of
each colour's luminance). The render builder resolves each object's style by its
index colour (true colours by the nearest index) and applies colour, screening,
linetype and lineweight. PLOT/EXPORTPDF use the page setup's table (or the
plotStyleTable option); layouts with Display plot styles (PAGESETUP
displayPlotStyles, DXF plot flag 2) show it on screen and in PNG/SVG exports.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
AUDIT checks for missing layers, linetypes, styles and block definitions,
current-style variables naming missing entries, invalid geometry (NaN or
infinite numbers, zero-length lines, zero-radius circles and arcs),
block definitions that contain themselves, duplicate handles, and
references to missing objects (dimension associations, groups,
constraints, viewport layer lists). It asks "Fix any errors detected?
[Yes/No] <N>:"; the JSON form `audit {fix?}` returns a structured
report. RECOVER opens a file through the read hook and applies AUDIT's
fixes. A question prompt now shows its answers without "or".
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Typed END, MID, CEN, GCEN, NOD, QUA, INT, APP, EXT, INS, PER, TAN, NEA,
PAR (any start of the word from three letters, with `_`/`'` prefixes)
and NON push a one-pick snap frame on the point-modifier layer: the
prompt reads "Endpoint of:", a typed point is snapped with that mode
alone within the aperture (or rejected with "No Endpoint found for
specified point."), and the canvas snaps the cursor with it
(Session::snap_override). A command's own keyword still wins (ARC/ZOOM
`cen`); `_cen` always snaps. Overrides nest with FROM and the filters.
Shift+right-click or Ctrl+right-click on the canvas opens the object
snap menu (From, Mid Between 2 Points, Point Filters, the snap modes,
None, Osnap Settings...), whose items type the same overrides. Tab over
a snap marker with nothing typed cycles the candidate snaps
(pointmod::snap_candidates: the running snap first, then the closest of
each mode).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
PLINE arc mode answered "not available yet" for Angle, CEnter, Direction,
Radius and Second pt, and line mode for Length. Each now asks its questions
(included angles and directions read the drawing's angle settings) and adds
the segment. XLINE's options were already in draw2's XlineM2; the dead
keyword stub in draw.rs's RAY machine goes, and Offset/Reference use the
polyline segment picked rather than the first one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Resting the cursor on a snap point acquires it for tracking (seven at
most; resting again releases it). Acquired points send horizontal and
vertical alignment paths, or every polar angle with POLARMODE 2; the
cursor snaps where two paths cross, where a path crosses an object, or
onto the nearest path. EXT runs a line or arc on from an acquired end,
PAR gives a path parallel to a rested-on line through the base point,
APP snaps where objects would meet if extended. Direct distance entry
follows the path the cursor is on. POLARMODE is now AutoCAD's bitcode;
POLARADDANG and AUTOSNAP are new.
The engine owns all of it (Session::snap_cursor, snap/tracking.rs); the
canvas draws the + markers, dotted paths and tooltip.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The options TRIM and EXTEND list at their prompt all printed "not available
yet". Quick and Standard modes follow TRIMEXTENDMODE, Edge extends lines and
arcs virtually (EDGEMODE), Project is kept in PROJMODE. The JSON forms take
fence, crossing, edgeMode and (TRIM) mode.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A point modifier typed at any point prompt pushes a frame on the session
(Session::point_mods) that asks for what it needs ("Base point:",
"<Offset>:", "First point of mid:", ".X of", "(need YZ):") and hands one
point to the command, so every command gets them from the command line
and in scripts, and they nest (FROM then M2P). `*x,y`, `*@` and `@*`
parse as world coordinates (the same as the plain forms: no UCS yet).
`<a` locks the next point to that angle from the base point: a typed
distance follows it, a pick is projected onto it, typed coordinates win.
TK is left to object snap tracking (#379).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Array commands: ARRAY, and the edit-array option loops for ARRAYRECT/ARRAYPOLAR (#230)
ARRAY (alias AR) selects objects, asks for the array type and continues as
ARRAYRECT, ARRAYPATH or ARRAYPOLAR. ARRAYRECT no longer creates a fixed 4x3
grid right after selection: it previews the array and loops on
ASsociative/Base point/COUnt/Spacing/COLumns/Rows/Levels/eXit. ARRAYPOLAR
asks for the center (or Base point), then loops on Items/Angle between/
Fill angle/ROTate items/eXit. The copies are created on eXit or Enter.
Associative arrays, levels and polar rows report "not available yet" and
return to the loop without consuming the next input.
The array commands move to cmd/array.rs. Arrays stay non-associative
copies, and the JSON forms are unchanged. A full clockwise polar fill
(-360) no longer puts the last item on top of the source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs/gaps.md: narrow F5 (array option loops, #230)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arrays: refuse arrays over MAXARRAY instead of hanging or shrinking them (#230)
`arrayrect {"rows":1000000,"cols":1000000}` was clamped to 1000x1000 and
then created a million copies of every selected object, which hangs the
app. ARRAYRECT, ARRAYPOLAR and ARRAYPATH (JSON and interactive, also via
ARRAY) now count items x selected objects and refuse an array over the
new MAXARRAY session variable (default 100000, settable 100..10000000)
with a message naming the limit, instead of clamping the counts and
silently creating fewer copies. The interactive count prompts accept at
most what still fits under MAXARRAY.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Progress docs per craftrules standards/progress-docs.md: target-app parity, gaps, roadmap with alpha gate, readiness by audience (full / mainstream / essentials) with Opus 5.5 hours, and feature, format, geometry, hardware, UI and localization parity docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Valentin Klein
Brandon Thomas