* Block Editor: BEDIT, BSAVE, BSAVEAS and BCLOSE for static blocks
BEDIT opens a block definition in the drawing's own tab with its base point
at the origin, and the block's objects are edited with the ordinary commands.
BSAVE writes them back into the definition, so every reference in the drawing
updates (one undo step in the drawing); BSAVEAS saves under a new name;
BCLOSE goes back to the drawing, asking whether to save unsaved changes.
- The drawing waits untouched while the editor is open (blockedit.rs): its
undo history, selection and views come back on BCLOSE. Objects left
unchanged are saved back exactly, so no coordinate drifts.
- Files save the drawing outside the editor; autosave keeps the editor's
unsaved changes in the block; the close/quit prompt's Save puts them into
the block first.
- Right-click a selected block reference: Block Editor. In the editor the
canvas is tinted, the base point is marked, and a bar offers Save Block,
Save Block As and Close Block Editor (also in the right-click menu). The
Block tool set's Block Editor button is now live. BLOCKEDITOR sysvar.
- Layout and paper-space commands are refused while the editor is open; a
block can't be saved to contain a reference to itself.
- Dynamic blocks: their data is kept; the editor says it can't edit their
parameters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition dialog; BEDIT can start a new block
BEDIT typed or started from a menu or the Tool Sets with no block reference
selected opens the Edit Block Definition dialog: the drawing's blocks sorted
by name, a preview and the description. OK opens the Block Editor on the
block named; a name no block has yet starts a new block, which BSAVE creates
(`bedit {name, create: true}`). A selected block reference still opens at
once, and JSON calls never open the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition: centred window, list box; gaps.md F3
The dialog opens centred on the window, the blocks are a full-width list
in a list box of fixed height, and gaps.md F3 mentions the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: find dynamic block data on the block's BLOCK_RECORD
A dynamic block's ACAD_ENHANCEDBLOCK dictionary hangs off its BLOCK_RECORD
table entry, not the BLOCK entity, so the "parameters are kept" note never
showed for AutoCAD files. Regression test with the data laid out as an
AutoCAD DXF has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: a dynamic block reference opens its dynamic block
A dynamic block reference with values of its own shows an anonymous block
(`*U12`), so the right-click Block Editor (and BEDIT on a picked or selected
reference) refused it and asked for a name. The anonymous block's record
names its dynamic block in AcDbBlockRepBTag xdata; BEDIT now opens that, as
AutoCAD does. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Block Editor: BEDIT, BSAVE, BSAVEAS and BCLOSE for static blocks
BEDIT opens a block definition in the drawing's own tab with its base point
at the origin, and the block's objects are edited with the ordinary commands.
BSAVE writes them back into the definition, so every reference in the drawing
updates (one undo step in the drawing); BSAVEAS saves under a new name;
BCLOSE goes back to the drawing, asking whether to save unsaved changes.
- The drawing waits untouched while the editor is open (blockedit.rs): its
undo history, selection and views come back on BCLOSE. Objects left
unchanged are saved back exactly, so no coordinate drifts.
- Files save the drawing outside the editor; autosave keeps the editor's
unsaved changes in the block; the close/quit prompt's Save puts them into
the block first.
- Right-click a selected block reference: Block Editor. In the editor the
canvas is tinted, the base point is marked, and a bar offers Save Block,
Save Block As and Close Block Editor (also in the right-click menu). The
Block tool set's Block Editor button is now live. BLOCKEDITOR sysvar.
- Layout and paper-space commands are refused while the editor is open; a
block can't be saved to contain a reference to itself.
- Dynamic blocks: their data is kept; the editor says it can't edit their
parameters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: find dynamic block data on the block's BLOCK_RECORD
A dynamic block's ACAD_ENHANCEDBLOCK dictionary hangs off its BLOCK_RECORD
table entry, not the BLOCK entity, so the "parameters are kept" note never
showed for AutoCAD files. Regression test with the data laid out as an
AutoCAD DXF has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: a dynamic block reference opens its dynamic block
A dynamic block reference with values of its own shows an anonymous block
(`*U12`), so the right-click Block Editor (and BEDIT on a picked or selected
reference) refused it and asked for a name. The anonymous block's record
names its dynamic block in AcDbBlockRepBTag xdata; BEDIT now opens that, as
AutoCAD does. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Multiline attributes: read, draw and save their text
A multiline attribute (DXF attribute type 2, or 4 for a definition) has its
text as embedded MTEXT after its own groups (`101 Embedded Object`); its own
group 1 is empty. CADCraft read only the own groups, so the attribute drew
nothing, and a save wrote it back empty: its text was lost.
- `Attrib::multiline` keeps the multiline text; `text.value` holds its plain
text, which ATTEDIT and the other value editors change; an edited value
replaces the contents (`Attrib::multiline_text`).
- DXF read: ATTRIB and ATTDEF split at the marker; the MTEXT parsing is
shared with MTEXT entities (`mtext_from`).
- Drawn as multiline text; ZOOM Extents counts it.
- DXF write (2007 and later; earlier versions get one line): attribute type,
alignment point and the embedded MTEXT, only what differs from unrotated
text, as AutoCAD writes it.
- INSERT and ATTSYNC give references the definition's multiline text placed
with them; MOVE/ROTATE/SCALE, Properties rotation and scale, annotative
scaling and FLATTEN carry it.
- Tests: synthetic multiline ATTDEF and ATTRIB (read, drawn, saved, edited,
pre-2007 save, damaged embedded groups); engine INSERT, MOVE, ATTEDIT and
ATTSYNC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Multiline attributes: read MTEXT direction from its own groups (#667, as #834 does)
#834 moves these lines' fix into the MTEXT reader; the same fix in the shared
mtext_from keeps the two compatible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: distances, positions, stretch and move actions, lookup chaining
Linear distances (snapped to their value sets) and point positions can be
changed; the stretch and move actions that follow them run (listed vertices
or whole objects, multiplier and angle offset), parameters in an action's
selection are carried along, associative hatches refill from their
stretched outlines and the reference's attributes move with their
definitions. Lookup tables run both ways (a changed input gives its table's
lookup value, which sets the other tables' inputs). Connections are read in
either group order. Checked against AutoCAD's own references (*U10, *U12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: record changes in the history as AutoCAD does; full value data for new references
A changed reference's ACAD_ENHANCEDBLOCKHISTORY says what was done to it: a
visibility state or lookup value by property name, a distance or position as
the drag of its grips (GRIPLOC, how far each grip is from where the dynamic
block has it). A reference that had no data gets a record for everything
other references of the same dynamic block have, with its own values.
Templates come only from references of the same dynamic block; anonymous
copies have no units; boundary reactors follow the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: record only the grips a change moves
AutoCAD's history holds the user's own drags; a grip that only moved with
another parameter (a stretch carrying it) gets no entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: a distance by name, as typed in Properties
AutoCAD records a distance typed in Properties as the parameter's name and
value in block units (1071 id, 300 Distance2, 40 40.0), replacing drags of
its grips; positions stay grip drags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block grips: show and drag a dynamic reference's grips as AutoCAD does
A selected dynamic block reference shows its grips: an arrow at each end of a
distance, a square at a position, a down-pointing triangle for a visibility
or lookup list, only those its visibility state lists. Dragging an arrow
changes the distance along the parameter (snapped to its values; a typed
number sets it), a square moves the position, a list grip offers its
choices; actions and lookups follow, with a live preview.
doc: dynblock::grips, drag_grip; grip objects by graph id.
engine: blocks.reference.grips, blocks.reference.grip, Session::start_dyn_grip.
ui: canvas dynamic grips (GRIPDYNCOLOR-like token), list popup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: read the shared DOOR fixture with LF line ends whatever the checkout gives
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic grips: Ukrainian labels for the new commands; copy the hot grip instead of cloning
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* HATCHEDIT: refuse an explicit bad scale or angle before editing anything (#724)
run_hatchedit read `scale` and `angle` leniently (a non-positive scale or a
non-numeric value was skipped), so such a request reported success, added an
undo step and cleared the redo history, applied its valid companion property
or recreated the boundary. HATCH already refuses a non-positive scale. The
numbers are now checked first with the same size_param rule; `angle` must be
a number; absent and null still mean "leave it".
* Docs: update the progress docs for this change
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* AutoLISP: load and run .lsp routines (#758)
CADCraft runs AutoLISP routines. `.lsp` files load with APPLOAD, (load)
or by dropping them on the window, and at startup from the support folder
(acad.lsp once per session or per drawing with ACADLSPASDOC, acaddoc.lsp
per drawing, then S::STARTUP; never from a drawing's own folder).
(defun c:NAME …) defines commands, (autoload) defers loading to first
use, and (expression) and !variable work at the command line and at
prompts. docs/autolisp.md lists what is supported.
The interpreter (crates/engine/src/lisp) reads source with its own
stack and evaluates on an explicit-stack machine, so a routine can stop
for input (getpoint, pause in command) and carry on later on one thread,
deep recursion is an error rather than a crash, and long loops run a
slice per frame (Esc stops them). It follows AutoLISP: 32-bit wrapping
integers, dynamic scope, *error*, vl-catch-all-apply, AutoLISP's error
wording. About 200 built-ins cover the language, command (with pause and
commands left open), entity lists (entget/entmake/entmod/entdel/entlast/
entnext/handent, through the DXF reader and writer's groups, exposed by
cadcraft-io and handed to the engine through a hook), ssget with modes
and filters, tables, system variables, get… input with initget, and
units. A routine is one undo step; each drawing has its own symbols.
Also: keywords typed as _KEYWORD match at prompts; TEXT run by a
routine's command takes one line; DIMENSION records carry their
measurement (42); Prompt::raw shows a get… prompt as written; the
interface asks Session::prompting() (a command's or a routine's prompt)
where it asked whether a command runs, so clicks, right-click and Delete
work at a routine's prompts; getcorner and based get… prompts drag a
rubber band.
Tests: the language, errors, startup files, interactive input, hostile
input (lisp/tests.rs); the #648 corpus, 18/18, when CADCRAFT_LISP_CORPUS
points at it (tests/lisp_corpus.rs); drop, frames and canvas clicks in
the app (ui-egui/tests/lisp_files.rs).
* AutoLISP: bound memory, drop nested values iteratively, guard the per-frame tick
- Cons cells drop with a work list over both car and cdr (and function
bodies), so a list nested a million deep in its car no longer overflows
the stack when it goes away.
- Memory caps so a runaway routine fails with a LISP error instead of an
uncatchable out-of-memory abort: at most 5,000,000 live cons cells
(counted in Value::cons / Drop, checked every step; cells the drawing's
variables already held at the run's start don't count against it), no
string a built-in makes longer than 8 MiB (strcat checks before joining,
printed text is cut), and a 2 GiB per-run budget for new strings,
printed text and files read.
- Session::lisp_tick runs under catch_unwind, and so does every slice of
the LISP machine: a panic ends the routine with "internal error", puts
the drawing back and leaves the session usable.
- Regression tests for each (deep car nesting, nested functions, the cell
cap, string length and budget, a panicking built-in in a blocking run
and in a ticked one).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Property-based and hostile-input tests for geometry numerics (gaps.md S6)
A deterministic xorshift64* generator (no new dependency) drives a few
thousand cases per property in crates/geom/src/property_tests.rs:
- line/line: hits lie on both lines, parameters reproduce the point,
swapping the operands gives the same point, finite results agree with
the infinite parameters
- line/circle and circle/circle: hits lie on both curves, results are
symmetric, properly crossing circles match the closed form; hostile
inputs (NaN, infinities, subnormals, raw bit patterns, 1e300) never
panic and the guarded functions return only finite hits or none
- segments: extending only adds hits
- closest points: fixed point of closest, perpendicular inside the
segment, endpoints outside
- arcs: at(0)/at(1) are the endpoints at radii from 1e-6 to 1e6; the
three-point arc keeps {start, end} = {p1, p3} and contains p2 (the
CCW-only storage swaps the pair when p2 is on the clockwise side, as
DXF stores arcs) and matches the circumradius closed form; collinear
inputs are rejected
- bounds and vector identities
- known answers at 1e6-1e7 coordinates hold to 1e-9 relative
gaps.md S6 removed and geometry-parity.md's Tests section updated in
the same change.
* docs: drop the sentence the new numerics tests make stale
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
At "Select objects", CP and WP take a polygon (Enter closes it) whose
inside marks the vertices that move, as a crossing window does; F takes a
fence, and what it crosses moves whole, like objects picked one at a
time. BOX works too, Undo takes back the last point, and the polygon or
fence is drawn while its points are placed.
The JSON form takes `polygon` or `fence` in place of `window`; both are
capped at the selection modes' point limit and refuse non-finite points.
Co-authored-by: Chanthawat Kiriyadee <enwuft@icloud.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A colour or freeze set in the host on an xref's layers (xref|layer) was lost on save:
the saved view dropped every xref-dependent symbol, layers included, and the DWG save goes
through the same DXF tags. The reader already keeps such layers when the xref loads.
The xref's layers are now written as xref-dependent LAYER records (DXF Reference, LAYER
group 70: 16 externally dependent, 32 resolved), as AutoCAD does with VISRETAIN = 1, with
the xref linetypes they use (same flags): without them a DWG falls back to Continuous.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Command line: a bare system variable name runs SETVAR on it (part of U10)
Typing ORTHOMODE, PICKADD and the like at the command line returned
"unknown command". Session::start now falls back to SETVAR with the name
already entered when the text is not a command but is a known variable;
dash, dot and underscore prefixes never mean a variable, and real
commands still win. Read-only variables print their value, and the
transparent form ('OSMODE) resumes the interrupted command.
Checked: fmt, clippy, test, assets, layers and wasm pass; also driven
through the control channel in the running app.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Tests: every variable name, command collisions and hostile input for bare SETVAR
Covers each variable SETVAR lists: a name that is not a command starts SETVAR
(or prints a read-only value), a name that is also a command keeps the command,
and odd input (lone apostrophes, NUL, wide characters, a 1 MiB name) never
panics and leaves the session usable. Disabling the fix makes all three new
and old tests fail.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* REFEDIT, REFSET and REFCLOSE: edit block references in place (#813)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move REFEDIT translation lines into the middle of the catalogs (avoids PR merge conflicts)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* MLEADEREDIT, MLEADERALIGN and MLEADERCOLLECT (#812)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move MLEADER translation lines away from the end of the catalogs (avoids PR merge conflicts)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* HATCH/GRADIENT: points and objects in one call; GRADIENT name and centered
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* HATCHEDIT: gradient parameter (make or change a gradient fill)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* HATCHPICK: pick hatch boundaries, an origin or hatches for the dialog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hatch dialog: state, defaults and the OK command call
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hatch dialog: pick points, objects, origin or hatch and come back
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hatch and Gradient dialog window (pattern swatches, gradient, origin, boundaries, options)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* HATCH, GRADIENT and HATCHEDIT open the hatch dialog; double-click a hatch to edit; HPDLGMODE
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hatch dialog: keep the window to its content (OK and Cancel stayed off screen); double-click test
A vertical separator between the two columns took the height available, so the window grew
every frame until its buttons left the screen. Found in the running app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: hatch dialogs in gaps, target-app parity and UI parity
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hatch dialog review fixes
- Double-clicking a hatch at its centre opened the dialog and also started a grip edit.
- Edit mode no longer clamps an out-of-range scale or angle into a change nobody made.
- HPORIGINMODE outside 1-5 means the current origin, as HATCH reads it.
- Picks made in one space are dropped when the dialog comes back in another (layout tab).
- A gradient hatch's Pattern tab offers the current pattern (HPNAME), not SOLID.
- Ukrainian: "Default to boundary extents" said "outside the boundary".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: lloyd <lloyd@stackworx.io>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Layers and objects get a PlotStyle property (ByLayer/ByBlock/name) applied
through named tables (built-in default.stb and monochrome.stb, our own
definitions). DXF keeps the names in the ACAD_PLOTSTYLENAME dictionary of
ACDBPLACEHOLDER objects with group 390 on layers and objects; tables kept in
the drawing travel in a CADCRAFT_PLOTSTYLES XRECORD. PLOTSTYLE sets an object's
or the current (CPLOTSTYLE) style; STYLESMANAGER lists, creates, edits, deletes,
loads and saves tables in our own JSON format (docs/plot-styles.md). A Plot
Style Manager dialog edits a table's styles and the layout's table; the
Properties palette shows the current plot style and table.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
MLEADER's Options answered "not available yet" for Leader type sPline and
None and for Content type Block. Spline leaders now draw as smooth curves
through their points (DXF LEADER path type 72 = 1); None places only the
content at one picked point; Block asks for a block name and how it
attaches (Center extents or Insertion point) and inserts it at the end of
the landing. MLeader gains `spline` and `block` (serde defaults); DXF stays
LEADER + MTEXT/INSERT. PURGE, RENAME, copy/paste, FLATTEN, grips and
extents follow the block content. The choices are remembered like the
other MLEADER options. docs/gaps.md: top-10 row 5, F1 and F10 narrowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A PlotStyleTable model in doc with our own built-in tables (default.ctb keeps
object properties, monochrome.ctb prints black, grayscale.ctb prints the grey of
each colour's luminance). The render builder resolves each object's style by its
index colour (true colours by the nearest index) and applies colour, screening,
linetype and lineweight. PLOT/EXPORTPDF use the page setup's table (or the
plotStyleTable option); layouts with Display plot styles (PAGESETUP
displayPlotStyles, DXF plot flag 2) show it on screen and in PNG/SVG exports.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
AUDIT checks for missing layers, linetypes, styles and block definitions,
current-style variables naming missing entries, invalid geometry (NaN or
infinite numbers, zero-length lines, zero-radius circles and arcs),
block definitions that contain themselves, duplicate handles, and
references to missing objects (dimension associations, groups,
constraints, viewport layer lists). It asks "Fix any errors detected?
[Yes/No] <N>:"; the JSON form `audit {fix?}` returns a structured
report. RECOVER opens a file through the read hook and applies AUDIT's
fixes. A question prompt now shows its answers without "or".
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Typed END, MID, CEN, GCEN, NOD, QUA, INT, APP, EXT, INS, PER, TAN, NEA,
PAR (any start of the word from three letters, with `_`/`'` prefixes)
and NON push a one-pick snap frame on the point-modifier layer: the
prompt reads "Endpoint of:", a typed point is snapped with that mode
alone within the aperture (or rejected with "No Endpoint found for
specified point."), and the canvas snaps the cursor with it
(Session::snap_override). A command's own keyword still wins (ARC/ZOOM
`cen`); `_cen` always snaps. Overrides nest with FROM and the filters.
Shift+right-click or Ctrl+right-click on the canvas opens the object
snap menu (From, Mid Between 2 Points, Point Filters, the snap modes,
None, Osnap Settings...), whose items type the same overrides. Tab over
a snap marker with nothing typed cycles the candidate snaps
(pointmod::snap_candidates: the running snap first, then the closest of
each mode).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
PLINE arc mode answered "not available yet" for Angle, CEnter, Direction,
Radius and Second pt, and line mode for Length. Each now asks its questions
(included angles and directions read the drawing's angle settings) and adds
the segment. XLINE's options were already in draw2's XlineM2; the dead
keyword stub in draw.rs's RAY machine goes, and Offset/Reference use the
polyline segment picked rather than the first one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Resting the cursor on a snap point acquires it for tracking (seven at
most; resting again releases it). Acquired points send horizontal and
vertical alignment paths, or every polar angle with POLARMODE 2; the
cursor snaps where two paths cross, where a path crosses an object, or
onto the nearest path. EXT runs a line or arc on from an acquired end,
PAR gives a path parallel to a rested-on line through the base point,
APP snaps where objects would meet if extended. Direct distance entry
follows the path the cursor is on. POLARMODE is now AutoCAD's bitcode;
POLARADDANG and AUTOSNAP are new.
The engine owns all of it (Session::snap_cursor, snap/tracking.rs); the
canvas draws the + markers, dotted paths and tooltip.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The options TRIM and EXTEND list at their prompt all printed "not available
yet". Quick and Standard modes follow TRIMEXTENDMODE, Edge extends lines and
arcs virtually (EDGEMODE), Project is kept in PROJMODE. The JSON forms take
fence, crossing, edgeMode and (TRIM) mode.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A point modifier typed at any point prompt pushes a frame on the session
(Session::point_mods) that asks for what it needs ("Base point:",
"<Offset>:", "First point of mid:", ".X of", "(need YZ):") and hands one
point to the command, so every command gets them from the command line
and in scripts, and they nest (FROM then M2P). `*x,y`, `*@` and `@*`
parse as world coordinates (the same as the plain forms: no UCS yet).
`<a` locks the next point to that angle from the base point: a typed
distance follows it, a pick is projected onto it, typed coordinates win.
TK is left to object snap tracking (#379).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas
codyvogt
NetterSilver
Books
Lion
Naka Sato
Marco Arnulfo
Logan Night
Valentin Klein
LloydNicholson
Gert Pellin - GPE
arekown