Commit Graph

9 Commits

Author SHA1 Message Date
vangel76 575642a5ed #372: uncompressed QuickTime (raw RGB / ARGB) output module format
Problem: the Render Queue had no single-file uncompressed output, so
handing a render to an external encoder meant a lossy codec, ProRes,
or an image sequence plus a separate WAV.

Fix: add the "QuickTime (Uncompressed)" Output Module format. Frames
are stored as QuickTime 'raw ' samples: 8-bit RGB (depth 24, rows
padded to even bytes) or ARGB with RGB + Alpha (depth 32), written
through FilmCraft's existing QuickTime muxer with PCM audio
(16/24-bit or float) like ProRes. Format name `uncompressed` on the
control channel; disk-space estimate and Sample Format menu included.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-11 12:43:33 +02:00
bflatastic 8c4a3cbfe0 Export: a Render Queue job renders every frame on the project's renderer (#414)
Cause: pipeline::Cx rendered with Backend::Auto, which picks the CPU or the
GPU compositor for each top-level frame from measured frame times
(render::AutoPick: warm-up on both sides, a re-probe every 48 frames). The
two compositors differ slightly, so frames came out differently depending
on which side the timings favoured in that run, and two GPU exports of the
same frames differed.

Fix: the job renders every frame on the project's renderer, as After
Effects renders a job with one renderer: Backend::Gpu with Mercury GPU
Acceleration (frames the GPU declines still render on the CPU, as they do
in every GPU render), Backend::Cpu with Mercury Software Only. The viewer
and previews keep Auto. Docs (architecture, parity, web) say so.

Tests: render_settings::a_job_renders_on_one_compositor exports ten frames
with a stand-in GPU compositor that keeps Auto history and draws solid
green: with Mercury GPU Acceleration every frame is green and two runs are
identical (with Auto the warm-up sent frames to the CPU: it fails), with
Software Only the stand-in is never asked. The web worker GPU job test's
comment no longer describes Auto.

Diagnosis by @pat-the-wizard.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 22:26:17 +07:00
Brandon Thomas a30cf38180 Merge main into M13.4 (codec completion): HEVC/AV1 on the export pipeline (Cx), one key-frame interval for all movie codecs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 07:29:32 -04:00
Brandon Thomas 280f7d509c M13.4: HEVC / AV1 output modules (MP4 hvc1/av01, WebM AV1), codec + Opus options in engine, UI, CLI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 05:01:43 -04:00
Brandon Thomas 1242a775fe M10.2: Render Queue completeness (render settings, output module, templates, logs, overflow, notify)
Render Settings: field render with 3:2 pulldown phases, effects/solo/guide
layer/color depth/frame blending/motion blur overrides, custom time sampling
(duration), storage overflow through a quota hook. Output Module: crop
(edges or region of interest), resize (presets, lock aspect, quality),
straight/premultiplied/alpha-only channels, post-render actions, include
project link, audio channels and PCM formats, WebM bitrate and key frame
interval. Render Settings / Output Module templates with built-ins and
defaults per slot (Edit > Templates dialogs), render logs next to the
output, Notify on completion. All through renderQueue.* commands and
persisted in the project.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 04:55:31 -04:00
Brandon Thomas 406706e3d5 OUT-2: WebM export (VP9 intra encoder + alpha, Opus), WAV/AIFF audio-only outputs
- effectcraft-vp9enc (L0): VP9 profile 0 key-frame encoder from the VP9 bitstream spec
  (8x8 intra blocks, DC/V/H/TM, 4x4 DCT/ADST, lossless WHT at quality 100, tile columns);
  round-trips exactly through FilmCraft's VP9 decoder and ffmpeg.
- export: WebM muxer (EBML/Matroska spec) with VP9, VP9 alpha in BlockAdditional
  (AlphaMode 1), Opus (CodecDelay = pre-skip); WAV and AIFF outputs.
- OutputFormat WebM/Wav/Aiff in the Render Queue, renderQueue.add formats, CLI --format.
- Tests: FilmCraft decode-back (frames, size, pixels, audio RMS), ffprobe/ffmpeg oracles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-02 22:28:15 -04:00
Brandon Thomas b936ed0055 OUT-2: Opus (CELT) encoder (effectcraft-opusenc)
New L0 crate effectcraft-opusenc: clean-room RFC 6716 CELT-only encoder
(fullband 48 kHz, 20 ms packets, mono/stereo as dual L/R stereo, constant
packet size from the bitrate) with the RFC 7845 OpusHead and pre-skip.
Forward low-overlap MDCT, inter/intra coarse energy, fine/final energy,
the decoder's exact allocation, recursive band splitting, PVQ search and
codeword indexing, silence frames.

crates/export depends on it; filmcraft-opus (dev) is the round-trip oracle
in tests/opus_roundtrip.rs, with ffmpeg reading an in-test Ogg Opus file
as a second oracle when installed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-02 21:41:29 -04:00
Brandon Thomas 31f192e2a9 M15.1: web build (eframe wasm) + xtask web
- apps/effectcraft-web (L6): eframe web runner booting the shared EffectcraftApp with a browser
  session: in-memory file table, <input type=file> pickers and drag-and-drop for open/import,
  downloads for Save and Render Queue outputs (several files as one stored .zip), and the
  window.effectcraft promise API over the control channel. Demo project on start.
- wasm32 runtime fixes: web-time for Instant/SystemTime (render, engine, export, ui-egui);
  Frames renders queued jobs on the UI thread (Frames::pump) instead of a thread pool;
  Render Queue runs inline; relative outputs resolve under / ; control PNGs inline.
- effectcraft-export: per-job output Sink (files to memory instead of disk); host FileExporter
  carries it; test that sink exports touch no file.
- xtask web [--dev] [--serve PORT] (wasm-bindgen 0.2.129, optional wasm-opt, COOP/COEP server);
  effectcraft-web in WEB_CRATES. docs/web.md, headless Chrome smoke test, favicon (+attribution).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-02 00:19:35 -04:00
Brandon Thomas 7f9c3a85c0 M10: render queue + export
- crates/export (effectcraft-export): render a comp's span to H.264 MP4 (+AAC),
  ProRes 422/4444 MOV (+PCM, alpha), PNG/JPEG/TIFF/EXR sequences and animated GIF
  via FilmCraft's pure-Rust encoders and MP4/MOV muxer; parallel batched frame
  rendering, progress callback with cancellation.
- project: Render Queue model (Render Settings, Output Module, output path
  templates, status) saved with the project.
- render: FootageSource::audio hook + comp audio mixdown (levels, in/out, solo,
  precomps); media implements it.
- engine: Exporter hook, background/blocking render job, renderQueue.* commands
  (add Cmd+M, remove, setRender, setRenderSettings, setOutputModule, setOutput,
  move, duplicate, render, stop, list, formats).
- host wires the exporter; CLI `render` subcommand.
- ui-egui: After Effects-style Render Queue panel with automation ids.
- tests: encode/decode round trips for every format (FilmCraft decoders,
  ffmpeg/ffprobe oracle when installed), audio, cancel, engine commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 22:02:06 -04:00