Settings > Appearance > UI Scale (appearance.uiScale, 75-200 %, default 100)
scales the whole interface on top of the display's own scaling, live as it is
chosen; Cancel puts it back, OK saves it and a saved scale applies from the
first frame. The Settings dialog's choice rows show a number setting with
choices as its text. Automation id: settings.appearance.uiScale.
egui's own Ctrl+= / Ctrl+- / Ctrl+0 zoom is off now: Ctrl+0 (Window > Project)
also reset the zoom behind the app's back, and the scale is a setting.
Test: engine tests_settings ui_scale_is_a_percentage_from_75_to_200; ui_panels
ui_scale_setting_sizes_the_interface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EXtractoR's Red, Green, Blue and Alpha are text parameters naming
channels, and Effect Controls drew nothing for text parameters: there
was no way to choose a layer or channel. And a multi-layer OpenEXR file
whose colour is only in named layers (`diffuse.R`, Blender's
`ViewLayer.Combined.R`) didn't import at all: the image decoder wants an
unnamed RGB layer ("does not contain non-deep rgb channels").
- Effect Controls: EXtractoR gets a Layer popup listing the footage's
OpenEXR layers. Picking one sets red, green, blue and alpha to its
channels in one undo step, as After Effects' EXtractoR dialog does (a
one-channel layer such as depth goes in all three colours). Red /
Green / Blue / Alpha are popups of the layer's own R, G, B, A, every
channel of the file, and (none). The lists are read only while open,
so playing an EXR sequence doesn't parse files on the UI thread.
- `layer.channels {layer}` lists a layer's EXR layers and channels and
what each layer shows in red, green, blue and alpha, for agents.
- Media: an EXR without an unnamed RGB layer imports and shows its
colour layer (one named combined, beauty or rgba first); its channels
stay available to EXtractoR and the 3D Channel effects.
- Raster: AuxChannels::layers / layer_rgba and split_channel.
Test: extractor_shows_the_chosen_layer_and_channels_of_a_layered_exr
(host: a layered EXR written with the exr crate imports, layer.channels,
EXtractoR renders spec and depth; it failed to import before),
extractor_offers_the_exr_layers_and_channels (UI: Layer popup, one undo
step, channel popup), layered_exr_without_an_unnamed_rgb_layer_imports
(media).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Position motion path drew a key's spatial handles only where its
tangent wasn't zero, and auto-Bezier keys have none at the path's ends,
so a two-key path (the usual start) had no handles to pull it into a
curve. Auto-Bezier keys now show a handle on such a side too, pointing
where the path leaves the key, a third of the way to the next key;
dragging it makes the key Bezier with that tangent. Linear keys still
show none.
Keyframe Interpolation > Spatial Bezier copied those zero tangents, so
the keys stayed straight with no handles (and read back as Linear); it
now gives them the same handles. The path keeps its shape and timing.
The handles come from the new keyframe::spatial_handles.
Tests: spatial_bezier_gives_a_straight_path_handles (engine),
a_straight_motion_path_has_handles_to_curve_it (ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The arrow keys did nothing to a selected layer, so it couldn't be lined
up precisely. As in After Effects, over the Composition panel or the
Timeline an arrow key moves the selected layers 1 pixel at the viewer's
magnification (half a comp pixel at 200 %, so sub-pixel steps come from
zooming in) and Shift+arrow 10, one undo step per press; holding the
key repeats. Not while typing or with mask points selected.
The move is the new engine command layer.nudge {x, y (comp pixels),
layers?}: through each layer's parents into Position (or X/Y Position),
a key at the current time when Position is animated, locked layers left
alone. It shares the Align panel's move.
Tests: nudge_moves_layers_by_comp_pixels (engine),
arrow_keys_nudge_the_selected_layer_at_the_viewer_magnification
(ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A footage or precomp layer dragged out past its source's end holds its
last frame, but its bar looked the same all the way, so the source's
end couldn't be seen. That part of the bar (and any part before the
source's start) is now darkened and striped in the label colour, with
an automation id (timeline.layer.<id>.bar.afterSource / beforeSource);
with time remapping on, the remap decides what shows there, so it isn't.
Enable Time Remapping on such a layer put its end key at the extended
out point; it now ends at the source's end, where the last frame starts
to hold (After Effects). Trimmed and reversed layers keep their keys.
Tests: time_remap_on_an_extended_layer_ends_at_the_source_end (engine),
the_bar_past_the_source_end_is_striped (ui_timeline_switches).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Selecting Time Remap in the Timeline (its name, which selects all its
keys) and pressing Delete removed the keys, and a second Delete then
deleted the whole layer. As in After Effects, Edit > Clear with Time
Remap selected now turns time remapping off (Layer > Time > Enable Time
Remapping off), in one undo step, and the layer stays; one selected
Time Remap key on its own is still deleted as a key.
Test: deleting_time_remap_turns_time_remapping_off (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging an expression's pick whip always replaced the whole
expression, also while it was being edited (and the editor then wrote
its old text back over the reference). As in After Effects, a pick
whip pressed while the expression is being edited now puts the
reference at the cursor, replacing the selected text, and the editing
goes on with the cursor after the reference. Without an edit in
progress it replaces the expression as before.
`prop.pickWhip` takes the text being edited (`expression`) and the
selection in it (`range`, in characters) to insert there.
Tests: the_expression_pick_whip_inserts_at_the_cursor_while_editing
(ui_inline_edit), pick_whip_inserts_into_the_expression_being_edited
(engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a Puppet tool, a click off the pins picked the topmost layer under
the pointer by its own bounds, and selected it. So a click where the
deformation had stretched the mesh past the layer's bounds went to the
layer behind (selecting it and giving it a Puppet effect), and any
click on another layer switched to it.
While selected layers have a Puppet effect, a click (or a press that
might start a pin marquee) now works only on them, as in After
Effects: on the layer whose mesh, as deformed now, is under the
pointer (the pin lands on the deformed shape), else the one whose own
art is (a new mesh); elsewhere nothing happens and the selection
stays. Without a rigged layer selected, the tools pick and rig the
layer under the pointer as before.
`puppet::contains` tests a point against a deformed mesh; `puppet.addPin`
uses it too (its own test only held for one triangle winding).
Test: puppet_pins_go_on_the_deformed_mesh_and_the_tool_stays_on_the_rigged_layer
(ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As in After Effects, pressing a property's stopwatch toggles it, and
dragging on over the stopwatches above or below gives every property
the pointer passes the state the first one got (animated or not),
whatever its own, in one undo step. Alt+click still adds an
expression.
The gesture is the layer switches' press-and-drag from #238, moved
into `switch_gesture` and shared by both. `prop.toggleAnimation` takes
`merge` so the drag folds into one undo step.
Tests: dragging_over_stopwatches_sets_them_all (ui_timeline_switches),
stopwatch_toggles_with_a_merge_key_are_one_undo_step (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Renders on macOS came out as `Comp 1.mov.ecproj`, and an image
sequence's every frame as `Comp 1_00001.png.ecproj`; another output
was `Comp 2.mov.mov`.
Cause: the save dialogs for anything but a project went through the
project dialog hook, which filters to `.ecproj`; macOS's save panel
appends the allowed extension to any other name. 0.4.0's Render Queue
Choose File… used it (#192 moved Output To to its own dialog since),
and Save Frame As, Save Current Preview, Export Lottie, Save a Copy As
XML, Collect Files, Watch Folder and the Premiere export form's Browse
still did. Nothing then fixed the name: Output To kept `.ecproj` (no
format claims it), and changing the format replaced only the last
extension (`Comp 2.mov.ecproj` → `Comp 2.mov.mov`). `[compName]` of a
comp named `Comp 2.mov` also doubled it.
Fix: `Hooks::save_dialog` asks the dialog for the default name's own
extension (`pick_save_file`), the project dialog only for projects or
on hosts without another (the web); the desktop dialog has no filter
for a name without an extension (folders). `OutputFormat::with_extension`
makes an output path end in the format's extension exactly once
(project extensions and repeats of the format's dropped, a missing one
added; `logo.png.mov` kept), used by Output To, format changes and
`resolve_output`, so existing projects and templates render to the
right name too. Output To picks the file type from the extension
before a stray `.ecproj`.
Test: output_names_end_in_the_format_extension_once (project),
output_to_ends_in_the_format_extension_once (engine) and
save_dialogs_offer_the_file_extension (ui); the engine and ui tests
fail with the fix reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New TRADITIONAL_CHINESE catalog: the same (command, English label) keys as JAPANESE and
SIMPLIFIED_CHINESE, one entry per fixed menu row (618 rows). The wording follows the
Traditional Chinese catalogs PhotoCraft, PdfCraft, VectorCraft and LightCraft already ship
(`檔案`, `開啟`, `儲存`, `圖層`, `遮色片`, `影格`, `預設集`, `快速鍵`, …).
- Match System maps a Traditional Chinese locale (`zh-TW`, `zh-HK`, `zh-Hant`, `zh_MO`) to
`zh-hant` instead of English, now that there is a catalog for it.
- `simplified()` and `traditional()` replace the Simplified-only `chinese()`; the macOS Services
item is 服务 in Simplified and 服務 in Traditional.
- `general.language` gains 繁體中文; `docs/preferences.md` documents the locale mapping.
- Tests: all three catalogs must cover the same fixed TREE entries; the shape check covers both
Chinese catalogs; label/undo/panel-title/submenu/native-menu behaviour in zh-hant with file and
layer names kept verbatim; the Traditional locale mapping; the preference round-trips.
- The i18n module now selects a catalog by language code instead of testing for Japanese:
`language(app)` returns the code, `lookup` is shared by every catalog, and the undo/redo
and workspace / 3D-view titles are formatted per language.
- New SIMPLIFIED_CHINESE catalog: the same (command, English label) keys as JAPANESE, one
entry per fixed menu row of the engine tree (618 rows).
- `general.language` gains 简体中文 (`zh-hans`). Match System maps a Simplified Chinese locale
(zh, zh-CN, zh_CN.UTF-8, zh-Hans-CN, zh-SG) to it and a Traditional one (zh-TW, zh-HK,
zh-Hant) to English, which has no catalog of its own yet.
- The macOS Services menu item is 服务 in Chinese.
- Tests: both catalogs must cover the same fixed TREE entries; `...`, brackets and spacing
keep the English shape; label/undo/panel-title/submenu/native-menu behaviour in zh-hans
with file and layer names kept verbatim; the locale mapping; the preference round-trips
through prefs.json.
Importing a glTF / OBJ model opened Interpret Footage: the probe
reports straight alpha and the file has no alpha label, so with
Settings ▸ Import ▸ Interpret Unlabeled Alpha As at Ask User (the
default) the model was listed as unlabeled. Only image footage
(stills, sequences, video) can have unlabeled alpha; a model renders
its own, and audio and data have none.
Test: importing_a_model_does_not_ask_about_alpha (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The host test writes a binary glTF cube (built in the test), imports it
with the real media layer, makes New Comp from Selection and renders
with no accelerator (the CPU path an Intel HD Graphics 5500 most likely
gets): the comp is Advanced 3D and the red cube covers part of the
frame. Before the fix the comp stayed Classic 3D and drew nothing. The
engine test checks the switch, its single undo step, the toasts, that a
second model doesn't switch again, and primitives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Imported GLB/glTF models were invisible in the Composition viewer while
text showed. Only the Advanced 3D renderer draws model and primitive
layers, and new compositions (and New Comp from Selection) are Classic
3D by default, but adding a model layer left the comp's renderer alone,
so the model drew nothing on every backend. It wasn't the reporter's
GPU: on this machine the viewer showed nothing for a GLB in a new comp
with the GPU compositor (Vulkan) and with Mercury Software Only, and
the model in both once the comp used Advanced 3D.
As After Effects documents ("Advanced 3D gets automatically selected
when you add a 3D model to the composition"), layer.newModel /
layer.addItem of a model and layer.newPrimitive now switch a Classic
3D comp to Advanced 3D inside the same edit (one undo step, Geometry
Options added to its text and shape layers like Composition Settings
does) and toast that the comp changed renderer. Switching a comp that
has model layers back to Classic 3D toasts why they disappear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Files dropped on the window or picked in the Import dialog were probed
one after the other on the UI thread: the app froze while a video was
read, nothing said what was being imported or how many files were
left, and only the last new item was selected. People ended up
importing the same file again and again.
file.import takes `background`: the files are probed in a background
job (Window > Progress, jobs.list / jobs.cancel) that names the file
being read and how many there are ("b.png (2 of 3)"); then they are
added in one undo step, all selected (the Project panel scrolls to
them, a file already in the project arrives again as in After
Effects) and a toast reports the count ("Imported 3 items", with the
first error). Drops and the Import dialog use it, and an Importing
card at the bottom left shows the job with its progress bar and
Cancel. Agents and scripts still import at once by default. The
toast registers an automation id.
Test: background_imports_report_progress_and_select_what_arrived
(engine), dropped_files_show_import_progress_then_the_items_they_made
(ui_drag_drop).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Environment light existed (LightKind::Environment) but layer.newLight's help
and the kind errors of layer.newLight and layer.lightSettings listed only
Parallel|Spot|Point|Ambient, so agents could not find it. The help now lists it
and says how to give it an equirectangular image: prop.set
lightOptions/source to that layer's id, or leave it empty for the comp's
Environment Layer (layer.environment). layer.lightSettings documents its kind
values too.
docs/parity.md (3D) notes that Advanced 3D surfaces reflect only the
Environment light and that Appears in Reflections is stored but has no visible
effect yet. Object-to-object reflections stay tracked in #261.
Test: tests_3d::environment_light_is_listed_and_takes_a_source_layer (help and
both kind errors name every LightKind; an Environment light takes a source
layer by id, with undo).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S1RGTt6AE3ysiaMQ7X6Nea
get_project / render.backend reported "gpuAcceleration": true with
"active": "cpu" and no reason, which read as a broken GPU. The
headless MCP server only attaches the GPU compositor when started with
--gpu, which docs/agents.md didn't mention, and a failed --gpu said
only "no usable GPU adapter" (the adapter's error went to a log no
one sees). The session now keeps the host's reason there is no GPU
compositor (accel_note): the CLI's "headless: renders on the CPU
unless started with --gpu", or the desktop app's compositor setup or
retirement error. The status reports it as `why` whenever it renders
on the CPU (or that the project's renderer is Software Only). --gpu
failures include the adapter's error (Gpu::try_headless).
docs/agents.md documents `mcp --gpu`.
Test: render_backend_says_why_it_renders_on_the_cpu (engine).
Checked with effectcraft-cli mcp and mcp --gpu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dockable panel (our own design) for the keys.easePreset commands. A
value graph shows the working curve with its two handles, which drag
to edit it; Apply eases the selected keyframes with it and From Keys
loads the curve between the first selected pair. Every preset is a
thumbnail drawn in code; a click loads it and applies it to the
selected keys. Save Current keeps the working curve under the name in
the field, and Rename and Delete act on the selected user preset.
Wide panels put the presets beside the graph; narrow ones below it,
the graph shrinking to leave a row of presets, scrolled with the wheel.
The panel state (working curve, selection, name) is serde in the UI
state, and every control registers an automation id (easePresets.*).
widgets::text_field is the search field without its magnifier.
Test: clicking_an_ease_preset_eases_the_selected_keys_and_handles_edit_the_curve
(ui_keyframes); every_panel_registers_automation_ids_for_its_widgets
covers the new panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
keys.easePreset.apply {preset | curve} eases every pair of neighbouring
selected keyframes of each selected property in one undo step: the out
side of the earlier key and the in side of the later one. A curve is
given as {outInfluence, outSpeed, inInfluence, inSpeed} or as handles
[x1, y1, x2, y2]. keys.easePreset.capture reads the curve between the
first selected pair; keys.easePreset.save {name, curve?} keeps it (or a
given curve), and list, rename and delete manage the user presets.
Twelve built-in curves are our own numbers (Linear, Smooth, Ease In-Out
Soft / plain / Strong, Accelerate and Decelerate with Strong variants,
Expo In-Out / Accelerate / Decelerate) and can't be renamed, deleted or
overwritten. User presets live in the config store (ease_presets.json),
loaded with the other settings. A file that isn't JSON gives no user
presets, and entries that don't parse, have no usable name or repeat a
name are skipped and logged. A failed write leaves the presets as they
were.
Test: a_preset_eases_every_selected_pair_in_one_undo_step,
a_curve_scales_to_each_dimension_and_follows_motion_paths,
apply_needs_neighbouring_keys_and_a_known_curve,
user_presets_save_rename_delete_and_persist,
a_corrupt_presets_file_loads_what_it_can (effectcraft-engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a layer already snapped its feature nearest the pointer to
other layers' edges, corners, centres, anchor points and path points
and to the comp's edges and centre, and Cmd/Ctrl held during the drag
already turned snapping on or off against the checkbox. What was
missing were After Effects' Snapping options beside the Tools bar's
checkbox. The new menu turns Snap Edges Extended off (a layer's edges
then snap only along the layer, not across the comp) and each feature
family (edges, corners, centres, anchor points, mask and shape path
points) on or off, for the dragged layer's snap features and for the
targets alike. Agents set them with view.snappingOptions.
Layers whose eye is off (or that a solo hides) are no longer snap
targets, mask and shape path points of the dragged layer snap too, and
while snapping is on the feature that snaps is boxed during the drag.
Test: layer_drag_snaps_to_other_layers_edges_ctrl_toggles_and_options_apply
(UI), snapping_options_pick_the_targets and
snapping_options_command_sets_and_toggles (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking (or marquee-selecting) keyframes in the Timeline selected only
the keys. Their property and layer stayed unselected, so the Graph
Editor, which shows the selected properties or else the animated
properties of the selected layers, came up empty until the property
was selected separately. As in After Effects, the Timeline's key
selection now selects the keys' properties and layers too (Shift adds
to them). keys.select takes this as `selectProperties`; the Graph
Editor's own key clicks leave what it shows alone.
Test: a_key_clicked_in_the_timeline_shows_in_the_graph_editor
(ui_keyframes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On some older Intel integrated GPUs (UHD 600, UHD with 2020 drivers)
the graphics driver crashes EffectCraft as its window's DirectX 12 or
Vulkan device is created (exit code 0xC0000005): the process
disappears with no message, and only WGPU_BACKEND=gl helped. A driver
crash can't be caught, so each launch now leaves a marker in the
settings folder until its window draws. A launch that finds the
previous one's marker switches the new Settings ▸ Startup & Repair ▸
Window Graphics (Automatic / OpenGL) to OpenGL and says so in the
status bar. A window that fails to open says the next launch will try
OpenGL. WGPU_BACKEND still wins; macOS has no OpenGL backend, so it
never switches there.
Tests: a_launch_that_never_drew_switches_the_next_to_opengl (app),
window_graphics_is_validated (engine). Checked end to end with a
leftover marker: the app opened on OpenGL with the notice and cleared
the marker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The logger kept warnings in memory and wrote to a file only after Help
▸ Enable Logging, and it ignored RUST_LOG. An app that never opens its
window (macOS 27 on Apple Silicon, #234) therefore left no trace. Now
RUST_LOG (a level, or env_logger-style `target=level` directives)
also prints what it lets through to stderr, including eframe, winit
and wgpu. The desktop app logs its start-up milestones: opening the
window, the graphics adapter, the app created, the first frame drawn,
the window being asked to close, and the window closed.
Test: rust_log_filters_by_level_and_target (engine logging). Checked
by running the app with RUST_LOG=info and quitting it over the control
channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Tools bar had Fill and Stroke swatches and a Stroke Width, kept in
the interface only, so agents couldn't set them and new shapes could
only be a solid fill with a solid stroke. As in After Effects:
- With a shape layer selected and a shape tool or the Pen active, Tool
Creates Shape / Tool Creates Mask choose whether drawing adds shapes
to the layer or masks on it (Fill and Stroke hide while drawing
masks).
- Clicking the word "Fill" or "Stroke" opens Fill Options / Stroke
Options: None, Solid Color, Linear Gradient or Radial Gradient, the
blend mode and the opacity. The swatches show the kind; Alt-click
steps through the kinds.
- New shapes and Pen paths are painted with them: a Gradient Fill or
Gradient Stroke across the shape for the gradient kinds.
The options are engine state (EditorState.shape_tool) set with the new
shape.toolOptions command; shape.newShape and shape.newPath use them
unless given paint parameters (which now include fillType, fillBlend,
fillOpacity and their stroke twins; layer.newShape takes them too). A
Pen path without paint parameters now takes the Tools bar's stroke
(none by default) instead of a fixed 2 px white one. layer.addMask also
draws rounded rectangle, polygon and star masks, so every shape tool
makes a mask on a selected footage or solid layer (rounded rectangles,
polygons and stars made a new shape layer).
Test: shape_tool_options_paint_new_shapes,
masks_of_every_shape_tool_kind,
tool_creates_mask_draws_a_mask_on_the_selected_shape_layer,
fill_options_paint_the_next_shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit > Duplicate (Ctrl+D) with a shape group or other shape item
selected in the Timeline duplicated the whole shape layer. As in After
Effects it now duplicates the selected items inside their group, each
copy above its original and numbered on ("Rectangle 1" gives
"Rectangle 2"), and selects the copies. With only layers selected the
layers are duplicated as before.
Test: duplicate_with_shape_items_selected_duplicates_them_in_place,
ctrl_d_duplicates_the_selected_shape_group_in_its_layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit > Copy with a shape group (or a path, fill, stroke or path
operation) selected in a shape layer's Contents copied the whole layer,
and Paste made a new layer. As in After Effects, Copy now copies the
selected items, Paste puts them into each selected shape layer's
Contents (above its selected item, in that item's group, else on top,
with names kept unique there: "Rectangle 2"), and Cut removes them, so
Cut + Paste moves them. Pasting with no shape layer selected is an
error rather than a new layer. Copying anything else clears the shape
item clipboard, as it does the other clipboards.
Test: shape_contents_copy_cut_and_paste_between_shape_layers,
ctrl_c_and_ctrl_v_copy_a_shape_group_into_another_shape_layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a shape layer selected, the Rectangle, Rounded Rectangle, Ellipse,
Polygon and Star tools made a new shape layer for every shape. After
Effects draws into the selected shape layer instead: the shape becomes a
new group on top of its Contents ("Rectangle 2", ...), placed by the
group's Transform. The new shape.newShape command does that (in the
layer's space, so a moved or scaled layer still gets the shape where it
was drawn), and makes a new shape layer only when no unlocked shape
layer is selected. The viewer's shape tools use it; masks on other
selected layers are unchanged. layer.newShape and the Pen's
shape.newPath share its layer and Contents helpers.
Test: shape_tools_draw_into_the_selected_shape_layer,
shape_tool_draws_into_the_selected_shape_layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each layer switch toggled on its own click only, so hiding or locking
many layers took a click per layer. As in After Effects, pressing a
switch in the A/V Features or Switches column now sets it at once, and
dragging up or down gives the same switch of every layer the pointer
passes the state the first one got, whatever their own state was
(rows passed in a quick drag included). The whole drag is one undo
step: layer.setSwitch takes a `merge` key like other gesture edits.
A single click still changes only that layer, so clicking the eye of
one selected layer doesn't change the others (Layer > Switches still
sets all selected layers).
Test: dragging_over_layer_switches_sets_them_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The interface language was English unless Japanese was chosen in
Settings ▸ General ▸ Language. Language now has a Match System choice
(`general.language` = `system`), the new default: the operating
system's interface language where EffectCraft has a translation
(Japanese), else English, as After Effects installs in the system's
language. English and Japanese can still be chosen; a language chosen
before stays. The browser build stays in English with Match System,
since it has no Japanese font of its own.
The system language comes from sys-locale (MIT OR Apache-2.0, no
dependencies on the desktop platforms), on desktop builds only.
Tests: match_system_uses_the_system_language_where_there_is_a_catalog
(i18n), interface_language_is_validated_persisted_and_backward_compatible
(engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every pin move re-rendered the Puppet's input (source, masks and the
effects before it) at full size on the UI thread and deep-copied it
for the mesh overlay: the cache key of a layer's input hashed all of
its effects, so moving a pin of the Puppet changed the key of its own
input. The input key now covers only the effects that run before the
Puppet, and the overlay shares the cached buffer.
Test: input_keys_ignore_later_effects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gnTnH3Jmk5zr4tMq1Mc9f
- Selecting a mask in the Timeline (its row or Mask Path), or a shape's
Path, selects all its points, so dragging one in the viewer moves the
whole mask, as in After Effects. Delete still removes the mask, and
selecting another property deselects the points.
- Mask Feather has the chain link (Constrain Proportions, on by
default, Alt edits one value) and no longer takes negative values;
Scale's link shows as a toggle too.
- Dragging in the Project panel's empty area draws a selection box
(Shift / Cmd adds); a click there deselects.
Tests: selecting_a_mask_selects_its_points,
mask_feather_values_are_linked_and_not_negative,
dragging_in_the_empty_area_box_selects_items.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gnTnH3Jmk5zr4tMq1Mc9f
- With a shape layer selected, the toolbar shows its Fill, Stroke and
Stroke Width (with any tool) and editing them changes the layer's
fills and strokes, as in After Effects (new shape.fillStroke, one
undo step per picker or drag). Shapes drawn without a stroke get one
when a stroke colour or width is set, so changing the stroke now works.
- Alt+Shift+P (A, S, R, T) reveals the property it keyed on each layer.
- A click in the time graph below the last layer deselects the layers
(it only deselected keyframes), so a shape tool draws a new shape
layer instead of a mask on the selected image.
Tests: toolbar_fill_and_stroke_paint_selected_shape_layers,
toolbar_stroke_edits_the_selected_shape_layer,
add_position_key_reveals_position,
clicking_below_the_layers_deselects_them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gnTnH3Jmk5zr4tMq1Mc9f
Trim Paths, Merge Paths, Repeater and the other path operations
existed (layer.addShapeItem) but no menu added them to a shape layer.
Like After Effects, a shape layer's Contents row now has "Add:" with
Group, Rectangle, Ellipse, Polystar, Path, Fill, Stroke, Gradient Fill,
Gradient Stroke and the path operations; with a shape group selected
they go into it. layer.addShapeItem gains the empty Path and Gradient
Stroke kinds.
A 3D text or shape layer in a Classic 3D comp now shows Geometry
Options with "Change Renderer…", which opens Composition Settings on
its 3D Renderer tab (Advanced 3D comps show the extrusion options).
Popup menus are as tall as the window allows and open upward near its
bottom: the 20-entry Add menu was cut at 420 px, hiding Trim Paths.
Tests: shape_contents_add_menu_adds_path_operations,
classic_3d_shape_layers_offer_change_renderer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gnTnH3Jmk5zr4tMq1Mc9f
Save as New Workspace stored the layout and `window.workspace` could
switch to it, but the Workspace submenu was a fixed list of the
built-in workspaces, so a saved one never appeared and could not be
chosen from the menu.
The submenu now has a `savedWorkspaces` dynamic node after the
built-ins (DynCtx carries the saved names), in the in-window and native
menus, with a check mark on the current one as the built-ins have.
The in-window submenu was also too short to show it. egui lays out a
new submenu in a default 400 pt area, and the scroll area inside took
that height and kept it, so Window ▸ Workspace (514 pt) opened with its
last rows (Undocked Panels and below, where saved workspaces go)
scrolled out of view. Submenus now open at their full height and scroll
only when taller than the window.
Tests: saved_workspace_is_listed_in_the_workspace_menu (picks it from
the menu bar), saved_workspaces_are_in_the_native_workspace_menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
apply_output checked `channels: rgba` against the module before it
applied `webmCodec`, and choosing AV1 then quietly dropped the channels
to RGB. So `render --format webm --webm-codec av1 --channels rgba` (one
renderQueue.add) succeeded and wrote an opaque AV1 stream.
The codec options now apply before Channels, so the existing "has no
alpha channel" error (how an unsupported channels request is already
reported) refuses the combination; for WebM it names the codec: "AV1
WebM has no alpha channel (VP9 WebM has)". Choosing AV1 alone on an
RGBA VP9 item still switches it to RGB, as changing the format does.
Test: av1_webm_refuses_requested_alpha.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
apply_output switched the format whenever the Output To extension mapped
to a different format, and `.mp4` maps to H.264 only, so
renderQueue.setOutput with an .mp4 path (even the item's own default
name) turned an HEVC or AV1 module into H.264 and the render wrote an
H.264 stream.
The extension now changes the format only when the current format
doesn't write it (OutputFormat::extension): HEVC, AV1 and H.264 all write
.mp4, so they stay; `.mov` on H.264 still picks ProRes and `.mp4` on
ProRes still picks H.264.
Test: output_to_keeps_a_format_that_writes_the_extension.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Their params docs wrote the renderer as `renderer? classic3D|advanced3D`.
Without a `:`, the doc parser reads `|` as "or another key", so
`advanced3D` became an accepted key in the schemas and the unknown-key
check: `comp.new {"advanced3D": true}` succeeded and made a Classic 3D
comp.
The docs now use the value-list form the other commands use,
`renderer?: classic3D|advanced3D`. The key is removed rather than
implemented: it would only duplicate `renderer` (and could contradict
it). A scan of every command's schema found no other key that came from
a value list.
Test: renderer_values_are_not_parameter_keys (not in the schema, rejected
as unknown, `renderer` still works on both commands).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prop.setExpression keeps an expression with a syntax error but disables
it, and says why only in its own reply. MCP set_property answers with
prop.get instead, and prop.get reported `evaluated` / `expressionError`
only for enabled expressions, so set_property, get_property and prop.get
all showed the broken expression as if it were installed.
prop.get now reports a disabled expression too: `evaluated` is the
static value that renders, and `expressionError` is its syntax error.
Test: expression_syntax_errors_reach_the_reply (set_property and
get_property carry the SyntaxError; runtime errors and valid expressions
report as before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`effectcraft-cli script FILE` passes the file's text to script.run, which
ran a compiled .jsxbin script as JavaScript and failed with "SyntaxError:
unexpected '@'" at 1:1, while file.runScript already says .jsxbin isn't
supported.
script.run now refuses a script named `.jsxbin` or whose text starts with
the `@JSXBIN@` header, with file.runScript's message (one shared
constant). The check is in the command, so the CLI with or without
--bridge, MCP run_script and the Script Console all report it.
Tests: engine_entry_points (by header and by name), script_file_and_eval
(the CLI exits 1 with the message and no SyntaxError).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Pan Behind drag passed its layer to the snapper's exclude list, which
dropped all of that layer's targets: its corners, edge midpoints and centre
as well as the anchor being dragged. The layer's box doesn't move in comp
space while the anchor pans (Position compensates), so those points are
valid targets.
The engine's per-layer snap targets are now one function, layer_targets,
which can leave out the anchor point. The gesture records its layer's
targets without the anchor as the drag begins and passes them to the
snapper (snap_with) as extra targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dmytro Matviichuk
bflatastic
Brandon Thomas
FeiLiuEM
jonassneu
pat-the-wizard
Alex Ulanch
Claude