filmcraft/crates/scopes

filmcraft-scopes

Video scope maths for the Lumetri Scopes panel (layer L3; depends only on filmcraft-color and serde; no UI, builds for wasm32). The UI (crates/ui-egui/src/panels/scopes.rs) draws what this crate computes; scopes.read (crates/engine/src/scopes.rs) returns it as numbers for agents.

Item	What
Signal	a frame's R'G'B' code values, decimated by nearest-sample picking to at most 480 × 270 (from_rgba8, from_rgba_f32_with + linear_to_pq for HDR, from_fn)
waveform	RGB / Luma / YC / YC no Chroma: one count grid per trace (columns = signal width, rows levels)
parade	RGB / YUV / RGB-White traces (drawn side by side)
histogram	256 bins of R', G', B', Y'; samples below 0 / above 1 counted separately
vectorscope_yuv	Cb right, Cr up, ±0.6; targets(matrix, amplitude) gives the six colour-bar targets, SKIN_TONE_DEG = 123°
vectorscope_hls	hue as the angle (red at the matrix's YUV red angle, then yellow, green, cyan, blue, magenta counter-clockwise), HLS saturation as the radius
summary	levels (min / max / mean in percent) per channel and per column range, densest vectorscope cells with angle and magnitude, coarse vectorscope
paint	count grids → premultiplied RGBA8 (log intensity, additive traces, Brightness gain; vectorscope points spread over 3 × 3)

Settings types (all serde, camelCase): ScopeKind, WaveformType, ParadeType, ColorSpace (Automatic / Rec. 601 / Rec. 709 / Rec. 2100 → BT.601 / BT.709 / BT.2020 NCL matrices), Scale (8 Bit / Float / HDR), Brightness, Targets (75 % / 100 %).

Definitions

• Y'CbCr from R'G'B' with the matrix's Kr/Kb (ITU-R BT.601-7, BT.709-6, BT.2020-2 NCL), Cb and Cr in −0.5…0.5; YC chroma amplitude = √(Cb² + Cr²), plotted at Y' ± C.
• Waveform rows span 0…1 with Clamp Signal (values clamped first) or −0.1…1.1 without (values outside are dropped). With 256 rows an 8-bit code value c lands on row c.
• HDR: linear working values (1.0 = 203 cd/m², BT.2408) → SMPTE ST 2084 PQ code values; the axis is 0…10 000 cd/m². SDR frames on the HDR scale use BT.1886 (γ 2.4, 100 cd/m² white).

Tests

src/tests.rs uses generated frames with known values: a flat colour lands in exact histogram bins; a 256-step ramp fills every bin and puts column x on row x; 75 % colour bars put each parade column on its code value and each bar on its vectorscope target cell (BT.601, BT.709, BT.2020), with the centre holding white + black; BT.709 red sits at (103, 21) on the 255² grid and 102.91° (BT.601: 108.65°); HLS hues land at red + 60° steps on the outer ring; YC chroma brackets luma; Clamp Signal; decimation; NaN and empty frames; summaries; painting.

Speed

cargo test --release -p filmcraft-scopes perf -- --ignored --nocapture (1920×1080 RGBA8 noise, Apple M4 Pro, one thread, machine shared with other builds):

Step	ms
decimate 1080p → 480 × 270	0.30
waveform RGB / YC	0.75 / 0.88
parade RGB-White	0.67
histogram	0.35
vectorscope YUV / HLS	0.67 / 0.81

Every scope is well under the 3 ms budget; the UI recomputes only when the frame or a setting changes.