Copy import used exists() then std::fs::copy: no sync, no comparison, and
a file appearing at the chosen name in between was replaced. It now goes
through import_move::copy_new, which reuses Move's copy_verified: a new
file (create_new, retrying -1, -2… on AlreadyExists), synced and compared
byte for byte with the source; a copy that fails or differs is removed and
reported as a failed import. Copy as DNG's copy step uses the same path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Convert to DNG / Copy as DNG: the encoded DNG must decode to the same raw
data, then goes through safe_file::write_new_unique (temp file, sync,
read-back, hard-linked to the first free <stem>.dng / -2 / -3 name, never
replacing a file). On failure no DNG is left, the photo is not relinked
and the raw copy is kept.
- Photo Merge writes its DNG the same way.
- Smart previews are written atomically; smart::is_valid (header + complete
JPEG) decides "built", has_smart_preview and the offline fallback, so a
proxy cut short is rebuilt (reported as `repaired`); moving proxies to a
new folder never deletes a good one in favour of a damaged copy and
copies across drives atomically.
Stacked on the #93 branch (shared lightcraft_catalog::safe_file helper).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- lightcraft_catalog::safe_file: one tested helper for crash-safe writes
(temp file in the same folder, sync, rename, folder sync; temp removed on
failure), write_new/write_new_unique that never replace a file and read
the result back, same_file, and a per-thread fault injection for tests.
- engine::originals::OriginalGuard: refuses a write whose target is a
catalogued photo's original or XMP sidecar (by file identity), whatever
the conflict policy or exact path. Used by run_batch (export, Export with
Previous, control/MCP exact paths), ui.render/ui.screenshot paths, merge
previewPath, MCP render_photo/screenshot paths (new query command
export.checkTarget) and lightcraft-cli render.
- The conflict policy now covers an export's sidecars together with the
file (Unique gives both the same free name, Skip skips when either is
taken).
- export::write_file replaces the plain std::fs::write in the desktop app,
CLI, MCP and engine writers; XMP sidecar writes use the shared helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whether an existing target is the photo itself is decided by file identity
(dev+inode on Unix; an exact directory entry check elsewhere), not by a
lower-case name comparison, so on case-sensitive volumes img_1.JPG next to
IMG_1.JPG is a collision (-1 suffix). Moves use a no-replace rename (hard
link + unlink where supported) and case changes go through a unique temp
name. Tests model case-sensitive and case-insensitive volumes and check
the real disk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
scan() now accepts only <2 hex>/<32 hex>.jpg (matching shard) and the
cache's own <32 hex>.tmp<id> temp files, so prune/clear never delete and
size() never counts foreign files in a shared thumbs/ folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shippori Mincho's name table credits 'FONTDASU / Google Inc. / but / Adobe' — its kanji
come from Adobe's Source Han Serif, which our asset rules exclude even under the OFL
(CLAUDE.md: no Source Han fonts). BIZ UDMincho (Morisawa Inc., design TypeBank Co., Ltd.;
OFL-1.1, from google/fonts at 63833b7) is a Mincho of its own with no Adobe glyphs, and
smaller (6.2 MB vs 8.7 MB). Attribution, licence text and NOTICE updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Bayer layout of Canon CR2 files differs by model (GBRG on the 7D, 50D,
60D, 550D, 600D, 1200D, 1300D, 5D Mark II, 1D Mark IV; RGGB on the 40D,
5D Mark III, 6D, 5DS R and others). Read it from raw IFD tag 0xc5e0
(CR2CFAPattern: 1 RGGB, 2 BGGR, 3 GBRG, 4 GRBG), anchored at the full
decoded sensor; fall back to RGGB when the tag is missing. No model table.
Checked on 35 decoded CC0 raw.pixls.us CR2s (35 models): the tag agrees
with the mosaic's green-diagonal statistic on every file; the SensorInfo
border parity does not predict the layout. Corpus manifest gains the
reporter's samples; a corpus test asserts each layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ROADMAP.md: new 'Where we stand' (by dimension and by kind of user; checklist 79% vs
~60-70% as a day-to-day Lightroom replacement) and 'Where we're going' (ordered priorities:
camera colour calibration, CR3 and compressed raws, verified camera coverage, render fidelity
suite, lens profiles, AI model strategy, then HDR / Classic modules / video). Current
parity numbers, M11 status, risks (raw-source decision of 2026-10-05), log.
docs/parity.md: new rows LR-PROF-CAMERACOLOR, LR-IMP-CAMERA-COVERAGE (P0) and
LR-BEHAV-RENDER-FIDELITY (P1) so quality gaps are tracked; Top gaps reordered by user impact.
README.md: honest status summary above the feature table; stale rows fixed (compressed NEF,
DNG/original export, image watermark, Move import), camera colour and AI/HDR/video rows.
AGENTS.md / CLAUDE.md: agents read the assessment before picking work, and downgrade
✅ rows they find wrong or incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decode Nikon Huffman-compressed NEF (compression 34713): lossless and lossy
(type 1 and 2) at 12 and 14 bits, with the maker-note 0x96 linearization
curve, predictor seeds and either byte order. Clean-room: 0x96 layout and
encoding-table sizes from prose write-ups (Clevy, Claff); the fixed Huffman
tables were recovered by black-box analysis of CC0 raw.pixls.us samples
(compressed vs uncompressed shots of the same scene) and verified on ~45
files from ~35 bodies. Lossy-after-split files stay preview only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A GPU render no longer hands back an image it cannot vouch for:
- set the wgpu device-lost callback (wgpu never reports a lost device as an
error, so a driver reset went unnoticed); readback waits with a timeout and
checks the poll result and map callback instead of blocking forever
- each render runs in OutOfMemory/Validation/Internal error scopes; errors
fail that render (OOM and limit failures for that render only, device
errors for the process) and it is redone on the CPU
- every buffer is checked against the device limit when created (no
validation error, no process-wide disable); LIGHTCRAFT_GPU_LIMITS=webgpu|<MiB>
creates the device with lower limits to reproduce small adapters
- the output buffer is cleared and the per-pixel kernel writes alpha 255:
any unwritten pixel (work silently dropped, the issue's all-black export)
fails the render; an all-black result is re-rendered on the CPU
- renders submit per stage and every 16 M invocations, the per-pixel stage
runs in ~4 MP bands: no long submission for a slow iGPU's watchdog to reset
- ui.inspect perf.gpuReason / perf.gpuFallback, app.gpu reason/lastFallback,
System Info and Settings say why the GPU is off (e.g. llvmpipe skipped) and
why the last render fell back
Tests: crates/gpu/tests/fallback.rs (limit, mid-render limit, validation
error, dropped work, black photo), engine export falls back to the CPU image,
banded 3000x2000 GPU/CPU equivalence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Local browse records can be most of a large catalog (85k photos, 90 %
Local: 313.5 MB snapshot). Untouched Local records of folders whose last
browse is older than library.preferences forgetLocalDays (default 30,
0 = never) are now removed from the catalog when the library opens (and by
library.forgetLocal {dryRun?, days?}), as journaled, non-undoable ops, then
compacted in the background. Files and XMP sidecars are never touched;
browsing the folder again catalogues them afresh.
Untouched = a Local file record, not deleted, not a virtual copy, whose
state still hashes to the fingerprint taken when the browse catalogued it
(any change keeps it); records from before fingerprints need every
user-editable field empty/default. Kept too: records in albums (or as
cover), stacks, sources of virtual copies, visible/selected/edited ones,
ones referenced by undo/redo, ones with a smart preview.
Per-folder last-browsed times live in the catalog (Op::SetBrowsed,
normalised with folder_key; re-stamped at most hourly). Old catalogs load
unchanged; folders without a time are stamped now, so nothing is forgotten
on the first open after the upgrade.
persist_bench (85k photos, 76.5k Local, every 7th folder recent, 1 in 50
rated): 63.8k forgotten, plan 162 ms, snapshot 313.5 MB -> 94.9 MB.
Settings -> Performance -> Local folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A command whose journal append fails now returns EngineError::NotSaved
("saved in memory but not written to disk: <reason>; LightCraft will retry")
instead of OK. The change stays applied and undoable, its ops stay queued and
are written by the next save (any command, or the frame loop with a 2 s
backoff). Queries and commands that change nothing are unaffected; a failed
compaction is reported in lastError, not as a failed command (and a failed
synchronous snapshot now backs off like a background one).
Session::unsaved(), library.info unsavedOps/unsavedError, ui.inspect unsaved;
the desktop UI toasts the failure and shows a warning on the top bar's cloud
icon until a save succeeds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At the 2,000-record threshold the UI thread serialised and fsynced the whole catalog (1-2 s
at 85k photos after streaming). Now `persist()` starts `Journal::snapshot_in_background`:
- the worker writes `catalog.snap` for op N from a clone of the catalog (photos are Arc-shared,
so the clone is cheap) through `Store::background_writer` (a second FsStore handle; MemStore
opt-in; none on wasm/web, which stays synchronous);
- appends go on as before (fsynced before every command returns) and are also kept in memory
as the "tail" (records > N);
- `Journal::poll` (from `persist` and the per-frame `persist_if_dirty`) sees the worker done and
atomically replaces the log with exactly the tail.
Crash points: before the snapshot rename -> old snapshot + whole log; between the rename and the
log rewrite -> new snapshot + whole log (records <= N skipped as stale, existing rule); after ->
new snapshot + tail. A failed snapshot keeps the log whole and retries after another
max_records records (no retry storm). At most one snapshot in flight; a synchronous snapshot
(close, Optimize Library), reopening a library and dropping the Journal first wait for it, so an
older snapshot can never replace a newer one. On-disk format unchanged.
Tests (crates/catalog/src/tests_background.rs, a gated store holds the worker mid-flight and
"crashes" by copying the files): edits during a background snapshot survive crashes at each
point and the trimmed log holds exactly seq N+1.. in order; failure loses nothing and backs
off; sync snapshot waits (no regression); drop waits; real FsStore with a leftover partial
temp file; a proptest over interleavings of edits / start / land / finish / sync snapshot /
crash. Mutations checked: trimming the log to empty, or not waiting in `snapshot`, fail them.
Engine: `threshold_compaction_runs_in_the_background` (crash copy mid-run, reopen without close).
`library.info` -> persistence gains snapshotRunning, failedSnapshots, maxBlockingMs and
lastSnapshot.{background, blockingMs}.
persist_bench, same session (load avg ~160), UI-thread time per threshold compaction:
85k photos: synchronous 0.85-1.7 s (median 1.25 / 1.34 s) -> background: blocking median
45 / 74 ms (clone 1.3-154 ms + log rewrite 9-23 ms); worker 1.2-2.4 s; 230-380
single-op appends during it at median 4-6 ms (same as without)
10k photos: synchronous 72-233 ms -> blocking median 12.5 / 14 ms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.import mode `move` (UI: Transfer ▸ Move, MCP import tool): reuses
Copy's destination, folder organisation (incl. custom templates) and rename
template. Each photo and its XMP sidecars (both namings) are placed without
touching the source (hard link on the same volume, else a new file that is
copied, synced and compared byte for byte; taken names get -1, -2…, never
overwritten). Sources are removed only after the catalog records are
committed and saved, and only when the destination is still intact; failed,
duplicate, unchecked and in-library files keep their sources; sources that
can't be removed are kept and reported (`kept`). Undo removes the catalog
records and leaves the moved files at the destination.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GPX 1.0/1.1 reader in lightcraft-meta (timed track points per segment; interpolation only within a
segment, nearest point within maxGap otherwise). Engine command photo.autoTagTracklog (path or gpx
text, camera time-zone offset, maxGap, replace, dryRun; one undo step) and Photo ▸ Auto-Tag from
Tracklog… with a time-zone prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File now opens with Import Photos… (Cmd+Shift+I), Import from Folder… and
Import from Device (command ids file.addPhotos / file.addFolder /
file.addFromDevice unchanged; library.import's label is Import Photos).
The review dialog is titled Import Photos, names its source (a scanned
folder is not added to Local; Local -> Browse Folder... is the persistent
location), labels the transfer mode and explains Add in place vs Copy, and
its button reads Import N Photos.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Selecting a mask added the Add/Subtract/Intersect/Invert/Delete row in
one non-wrapping horizontal layout (~273 pt in a ~220 pt column), and the
Create New Mask grid needed 226 pt: the panel's contents grew wider than
the panel (a 250 pt panel came out 275 pt wide) and were drawn
shifted left, clipped by the photo area. The action row now wraps, the
tile grid sizes its tiles and columns to the available width (four tiles
of 48–52 pt, else three), and a component's name is truncated before its
options button. A headless test checks that every widget stays inside the
right panel at 250, 270, 330 and 520 pt, with and without a selected mask
and with the brush settings open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.import organize now also takes a folder template, e.g.
{date:%Y}/{date:%Y%m%d} -> 2026/20260114 (Organize::Template). The
template's own / (or \) make the folder levels; each level is expanded
with the rename tokens and sanitized, so metadata can never add a level or
climb out of the destination; absolute paths, drive letters, ~ and . / ..
levels are refused. Dated by capture time, else the import time; a level
whose metadata is missing becomes 'unknown'. The import dialog's Folders
menu gains 'Custom template...' with a template field, tag help, live
validation and an example full destination for every mode; the dialog
stays open (with a toast) when the import is refused. The MCP import
helper passes mode/destination/organize/rename through (docs/mcp.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both side panels had an exact width. They are now resizable egui panels
whose width lives in UiState (leftWidth / rightWidth, serde, sanitized on
load) so it survives panel switches, view changes and restarts; egui's
own remembered size is dropped each frame and only a drag of the edge
writes back (measured from the fixed edge to the pointer, so content
wider than the panel can't creep it). Limits: left 200–480 pt, right
250–520 pt, and the photo area keeps at least 360 pt; a narrower window
shrinks the panels without forgetting the chosen width. The bottom bar,
which sits between the panels, now drops Copy/Paste Edit Settings and
then the rating pill when its centre has no room instead of overlapping
the zoom controls. The unused left_w theme token is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Browsing a folder inside a listed Local location (built-in or kept) no
longer adds it as a root of its own: it is highlighted inside that
location's tree, which opens down to it once per browsed folder, so its
ancestors and siblings stay reachable. A folder outside every listed
location gets a session-only row that stays while browsing below it and
offers Keep in Local; subfolder rows offer Add to Local. New UI command
local.addRoot keeps a folder in Local (saved with ui.json, so it
survives restarts; it un-hides it too); Browse Folder... uses it.
Removal stays sidebar-only (local.hide).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
rename::TOKENS / DATE_DIRECTIVES / TEMPLATE_NOTES are now the one list of
file-name template tags (a test checks expand_tokens knows each, and that
the rename/import command descriptions mention them all). A Tags toggle
beside the import Rename field (also Rename Photos and export File name)
lists every tag with its meaning and a live example, the {date:...}
directives and the rules (extension appended, blank keeps names, missing
date/metadata, unknown tags stay literal); clicking a tag inserts it at
the text cursor. Unknown tags are flagged under the field. New query
command photo.renameTokens returns the same help as JSON. The import
preview now uses the probe's metadata and the import time for undated
photos, as the import itself does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Local compared folder paths as raw strings, so a built-in location built
as "{home}/{sub}" and the same folder returned by library.browse with
native separators could be listed twice. Folder identity now goes
through catalog::query::folder_key (both separators, trailing/doubled
separators, ./.., verbatim and UNC prefixes, drive-letter case; whole
path case-folded on Windows): the sidebar's root list, the highlighted
and expanded-on-the-way folder, saved Browse Folder roots and
local.hide / local.restoreHidden all compare by it. Built-in paths are
joined with the platform separator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog Meta gets copyright_status (unknown / copyrighted / publicDomain), usage_terms and
copyright_url, read and written as XMP Rights Management fields (xmpRights:Marked, UsageTerms,
WebStatement) on import, sidecars and exports (kept by "copyright only"). photo.setMeta,
copy/paste metadata, metadata presets, a Copyright Status smart-album rule and the Info panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The album rows read their counts from Caches::album_counts, recomputed
only when the catalog revision changes (photos, metadata and album rules
all bump it) and, while a smart album uses an "in the last..." rule,
when the session clock enters a new minute. Catalog::album_count counts
smart-album matches in place instead of building the id list for its
length. RuleSet/Filter::depends_on_now tell clock-relative rules apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Menus are rebuilt every frame, and File → Add from Device called
devices(), which scanned every mount (D:..Z: on Windows) while holding
the cache mutex once its 2 s cache expired. devices() now returns the
last scan at once and starts at most one background rescan when it is
stale; the scan runs without the lock. A changed result calls an
on_change hook (the UI requests a repaint), so hot-plugged cards still
appear. library.devices and Add from Device without a path scan
synchronously (devices_now). Volume roots are probed for DCIM directly
instead of listing them (Windows never lists a root). No threads or
clock on wasm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sidecar's exif:DateTimeOriginal / photoshop:DateCreated / xmp:CreateDate
now reaches Photo.captured on import and on Read Metadata from File when
the file has no embedded capture time (embedded wins). On import the
sidecar is read before copying, so the date also files and names copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Missing Photos (sidebar count, the view, library.missing, Find Missing)
now shares one scope rule, cmd::missing::checked_path: non-deleted
library photos backed by a file. Local browse records, which can
outnumber the library by orders of magnitude, are never stat'ed. The
Missing view checks only the photos its query kept instead of every
catalog record.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Registered File commands the explicit layout doesn't list were appended
after Quit LightCraft. Items in LAST (app.quit) are now held back and
placed after the fallback entries, in their own separator group. The
macOS native menu filters Quit into the app menu and is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas
midasdf
storybored379