Each drag tick changed the edited photo's settings, so the filmstrip asked
for a new thumbnail render every frame. For an unedited raw shown with its
embedded preview, the thumbnail-level source had never been decoded, so each
of those renders decoded the whole raw (a 64 MP ARW: over a second), several
side by side, and the loupe's drafts queued behind them.
- The edited photo's thumbnail is not re-rendered during a slider drag while
it has one; it follows once the drag ends.
- A thumbnail of a photo whose preview-level source is decoded (the one in
the loupe) is cut from that source (SourceRef::Fit) instead of decoding the
file again; not when the photo has a denoised picture.
Co-Authored-By: Claude <noreply@anthropic.com>
Add correlated dark holdouts that reject misleading training and accept
matching training. Check finite, monotone curves in both cases. Confirm
the regression fails with the error gate removed and passes when restored.
Qualify the improvement claim when no original curve can be fitted, and
explain the source-look process policy and offline smart preview refresh.
Co-Authored-By: Codex <noreply@openai.com>
Use separate luminance pairs for tone fitting so the camera look follows
its JPEG into deep shadows. Keep colour pairs and holdouts unchanged.
Require enough correlated shadow samples and lower held-out error, with
noise and compression floors and the existing median curve fit.
Add synthetic regressions, bump look and render cache versions, and
record the public multi-make and private numeric validation in the docs.
Fixes#1307
Co-Authored-By: Codex <noreply@openai.com>
Without a path, file.addFromDevice took the first device found, so with
two cards connected the album menu imported from whichever came first.
Like File ▸ Import from Device, the album's Import from Device is now a
submenu with one entry per camera or card (or "No Camera or Card
Found"), each passing its path along with the album.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An album's context menu gets Import ▸ with File ▸ Import's ways in
(Import Photos…, Import from Folder…, Import from Device). file.addPhotos,
file.addFolder and file.addFromDevice take {album}; the scan task carries
it and the review chooses it when the scan is done, if it still offers
that album (not deleted, not a folder or smart album).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.up / library.down (Up / Down) go to the cell above / below in the
grids (nearest by position in justified rows; the top / bottom row stays
put), and step one photo in the filmstrip.
Sources: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With XMP auto-write on, photo.readMetadataFromFile committed what it read
and the command handler then wrote the sidecar back, adding lc:settings to
a sidecar that had only another app's crs: settings. Later reads prefer
lc:settings, so LRTimelapse's next crs: edits were ignored. The read now
sets the existing one-command skip_auto_write switch (as photo.removeRegion
does); edits made afterwards are still auto-written.
Tests: a read leaves the sidecar byte for byte and a later develop edit is
still written; the issue's crs:Exposure2012 0.5 -> 1.2 round trip is read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A panic inside RenderJob::run or QuickJob::run (a raw decoder or pipeline bug) unwound the
job pool's worker without sending a result. The slot stayed pending and its key was never
asked for again, so the loupe or the thumbnail rendered forever; and the pool never
replaces a dead worker, so after as many such panics as it has workers (2–6) no photo
rendered until LightCraft was restarted.
Both now catch the panic (guard::catch) and return it as the job's failure, answering the
request it came from, so the renderer records it like any failed render: no retry until
the catalog changes, and the workers live on. run() is the one place every render goes
through (the pool, export, Build Previews, contact sheets, face and AI-mask workers);
callers that had their own guard keep working, and the watermark preview's, now
redundant, is gone. The web build aborts on panic, so nothing changes there.
Co-Authored-By: Claude <noreply@anthropic.com>
Photo Merge decoded each raw itself and wrote the reference frame's own colour
tags into the merged DNG. A CR2 (and NEF, ARW and the other raws whose colour is
fitted from the camera JPEG) has none, so an HDR merge of CR2s rendered with no
camera colour: green and about 16 L* dark.
`lightcraft_merge::load_frame_with` takes the raw's colour tags from the caller,
and the engine passes `starting_colour_tags`: the colour the raw opens with
(`starting_colour`) as DNG tags. That is one forward matrix with a colour matrix
and AsShotNeutral that agree with it at the as-shot white, the look's hue/sat
table as ProfileHueSatMap and its tone curve as ProfileToneCurve. Raws with
their own matrices (DNG) keep their tags. The look's chroma curve has no DNG
tag and is left out.
On two CC0 CR2s (EOS 550D, 40D) an HDR merge of three copies against the photo
alone: mean CIE76 dE 26.15 -> 1.07 and 22.89 -> 0.47.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While no monitor profile is chosen, the Linux app reads the profile the
desktop assigns to the display in colord (org.freedesktop.ColorManager,
system bus, via zbus) on a background thread every 3 s, and shows
previews through it. With several displays it is used only when they all
share one profile; without colord the view stays sRGB. Windows' WCS
needs FFI and stays manual. Also satisfies clippy 1.99's
chunks_exact_to_as_chunks in spots.rs.
Sources: the colord D-Bus API documentation; own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The header-only path added in #755 answers for a Fuji RAF, whose preview pointer sits in the first
bytes. A Canon CR3 keeps its preview in a JPEG track, and a TIFF raw (CR2, ARW, DNG, RW2, 3FR …) can
keep its preview tag in an IFD the prefix cuts short: both fell back to `std::fs::read` of the whole
file — tens of megabytes for a JPEG of a few, on the format of the largest bucket in gaps.md (Canon,
33 % of photographers).
`preview_window` now asks `lightcraft_raw::sparse::preview_plan` — the module #961 added for the
import path, which had no production caller — which ranges `embedded_preview` reads, and reads
exactly those: `planned_preview` fills a buffer of the file's length, reads the ranges the plan names
and asks again until it says `Ready`. The buffer is the file's length, which the memory gate counted
already, and its untouched pages stay zero, so what this path costs is the bytes read — on macOS a
freed buffer of that size may sit in the allocator's cache rather than go back to the OS (measured on
a 38k-photo import, #832). The loop gives up past 60 % of the file, the bound step 2's partial read
uses, and a plan that does not fit, a file past 1 GiB or a window that does not decode all end in the
whole-file fallback.
The quick path hands the JPEG to the decoder alone, so two container facts the whole-file path applies
have to be visible in the bytes it is handed, or the file declines and the whole file keeps the
preview:
- a preview colour space of Adobe RGB (`decode_raw_preview` applies it; a JPEG-only decode has the
JPEG's own space, else sRGB). A container that says sRGB does not decline — that is what the decode
assumes anyway, and declining it took the fast path away from a real Sony ARW;
- the file's own EXIF orientation, when the preview JPEG carries none of its own: the plan's header is
a bounded 64 KiB (the header route grows its prefix to the preview's declared extent instead), and
an orientation tag it cannot see would show the preview unrotated.
Measured over the whole CC0 corpus (111 raws): 52 files take this route, reading a median 7.8 % of
their bytes (0.9-27.7 %) — RW2 3.3 %, Leica RWL 4.1 %, ARW 7.5 %, CR3 8.4 %, DNG 9.7 %, CR2 14.3 % —
while the 21 RAFs stay on the header route (median 4.5 %). The other 38 read whole: NEF, NRW, ORF, PEF
and SRW because the planner does not describe them (an SRW plans to the whole file, which the 60 %
budget then declines), plus the ARWs, CR2s, CR3s and DNGs that declare Adobe RGB or whose plan wants
more than that budget — the bytes they read are the ones the plan would have read anyway. Across all
111 files the plan handed on the same preview as the whole file, with the skipped bytes zeroed and
again 0xFF. `LIGHTCRAFT_PROFILE=1` prints
[profile] preview …/arw-sony-a7rm4a-compressed.arw: read 688128 of 61832192 bytes (plan, window 483441)
Tests: a synthetic TIFF/DNG whose preview only its tags locate (identical pixels to the whole-file
path, the CFA strip unread), the same structure without the tag that makes it a raw, a file whose
orientation only the whole file shows, and a file that states Adobe RGB against one that states sRGB;
the opt-in real-file test reports which path answered.
Co-Authored-By: DeepSeek V3.2 <noreply@deepseek.com>
tests/accessibility.rs walks the AccessKit tree headless in every view,
Develop tool and 13 dialogs and fails on unnamed controls, sliders without
value/range and untitled dialogs. Fixes what it found: text fields are
named by caption or hint, develop sliders expose min/max/step/value text
and take Increment/Decrement, Tab-focused sliders take the arrow keys,
Auto Stack's slider is named. Also as_chunks in spots.rs for the newer
clippy lint. Docs: ui-parity audit section, checklist, gaps, ROADMAP.
Sources: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Photos that tie on the sort key (equal ratings, one import batch, a
burst within a second) now sort by file name before id, in
Catalog::query, Recently Added and auto-stack. Split out of #641.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
All 38 files decode from sensor data and develop at full size (9520x6336 and
6336x9520) without error; mean CIE76 dE to the camera JPEG is 6.3-13.9 at 400 px.
The files are not committed and the evidence entry carries no path. Leica is now
14 verified / 47 unverified, the Leica bucket on a verified body 5% -> 21%; the
weighted shares (85% decode, 42% on a verified body) do not move.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
On merge: the HDR histogram is applied in develop_reporting (#712 split develop), is skipped for
draft renders (a second render per drag tick), and HdrBins::bin clamps a hand-built split so it
can't underflow (test hdr_bins_with_any_split_stay_in_range).
photo.editExternal takes the selection (or ids, at most 50): each photo gets its own -Edit copy
stacked on its original, the copies are selected and returned in copies (path / id / original
still name the first). Photo ▸ Edit In opens each copy in the editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BKWB9TCnvzJHV6xMLAj2J4
On merge: Lightroom's default profiles (Adobe Standard, Adobe Color), named by nearly every sidecar,
give no camera-profile warning; other profiles still do (test default_lightroom_profiles_are_not_reported).
The import help string keeps main's onDeleted wording and gains warnings.
On merge: the quick preview path orients like the whole-file path (preview_orientation with the
raw's header prefix, so a portrait raw whose embedded JPEG carries no orientation is not sideways),
and its doc links point at preview_window.
bflatastic
Marco Arnulfo
dev-null-undefined
Alex Chambers
Markus Friedel
Andrew Frahn
lloyd
goujicheng
Fabio Lussi
Alfons Hoogervorst
Claude