Selecting a mask added the Add/Subtract/Intersect/Invert/Delete row in
one non-wrapping horizontal layout (~273 pt in a ~220 pt column), and the
Create New Mask grid needed 226 pt: the panel's contents grew wider than
the panel (a 250 pt panel came out 275 pt wide) and were drawn
shifted left, clipped by the photo area. The action row now wraps, the
tile grid sizes its tiles and columns to the available width (four tiles
of 48–52 pt, else three), and a component's name is truncated before its
options button. A headless test checks that every widget stays inside the
right panel at 250, 270, 330 and 520 pt, with and without a selected mask
and with the brush settings open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both side panels had an exact width. They are now resizable egui panels
whose width lives in UiState (leftWidth / rightWidth, serde, sanitized on
load) so it survives panel switches, view changes and restarts; egui's
own remembered size is dropped each frame and only a drag of the edge
writes back (measured from the fixed edge to the pointer, so content
wider than the panel can't creep it). Limits: left 200–480 pt, right
250–520 pt, and the photo area keeps at least 360 pt; a narrower window
shrinks the panels without forgetting the chosen width. The bottom bar,
which sits between the panels, now drops Copy/Paste Edit Settings and
then the rating pill when its centre has no room instead of overlapping
the zoom controls. The unused left_w theme token is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Browsing a folder inside a listed Local location (built-in or kept) no
longer adds it as a root of its own: it is highlighted inside that
location's tree, which opens down to it once per browsed folder, so its
ancestors and siblings stay reachable. A folder outside every listed
location gets a session-only row that stays while browsing below it and
offers Keep in Local; subfolder rows offer Add to Local. New UI command
local.addRoot keeps a folder in Local (saved with ui.json, so it
survives restarts; it un-hides it too); Browse Folder... uses it.
Removal stays sidebar-only (local.hide).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Local compared folder paths as raw strings, so a built-in location built
as "{home}/{sub}" and the same folder returned by library.browse with
native separators could be listed twice. Folder identity now goes
through catalog::query::folder_key (both separators, trailing/doubled
separators, ./.., verbatim and UNC prefixes, drive-letter case; whole
path case-folded on Windows): the sidebar's root list, the highlighted
and expanded-on-the-way folder, saved Browse Folder roots and
local.hide / local.restoreHidden all compare by it. Built-in paths are
joined with the platform separator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The album rows read their counts from Caches::album_counts, recomputed
only when the catalog revision changes (photos, metadata and album rules
all bump it) and, while a smart album uses an "in the last..." rule,
when the session clock enters a new minute. Catalog::album_count counts
smart-album matches in place instead of building the id list for its
length. RuleSet/Filter::depends_on_now tell clock-relative rules apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Menus are rebuilt every frame, and File → Add from Device called
devices(), which scanned every mount (D:..Z: on Windows) while holding
the cache mutex once its 2 s cache expired. devices() now returns the
last scan at once and starts at most one background rescan when it is
stale; the scan runs without the lock. A changed result calls an
on_change hook (the UI requests a repaint), so hot-plugged cards still
appear. library.devices and Add from Device without a path scan
synchronously (devices_now). Volume roots are probed for DCIM directly
instead of listing them (Windows never lists a root). No threads or
clock on wasm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sidecar's exif:DateTimeOriginal / photoshop:DateCreated / xmp:CreateDate
now reaches Photo.captured on import and on Read Metadata from File when
the file has no embedded capture time (embedded wins). On import the
sidecar is read before copying, so the date also files and names copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Missing Photos (sidebar count, the view, library.missing, Find Missing)
now shares one scope rule, cmd::missing::checked_path: non-deleted
library photos backed by a file. Local browse records, which can
outnumber the library by orders of magnitude, are never stat'ed. The
Missing view checks only the photos its query kept instead of every
catalog record.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Registered File commands the explicit layout doesn't list were appended
after Quit LightCraft. Items in LAST (app.quit) are now held back and
placed after the fallback entries, in their own separator group. The
macOS native menu filters Quit into the app menu and is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add LICENSE-MIT and LICENSE-APACHE (Copyright (c) 2026 ArtCraft Team and the
LightCraft contributors) and docs/brand/LICENSE-brand.txt from the Crafting Apps
licensing standard. Rewrite NOTICE to the standard template and drop the stale
Source Sans 3 entry (only Inter is bundled). Attribute docs/brand/ in
assets/ATTRIBUTION.md so `cargo xtask assets` passes again. README gets the
standard "License and credits" section; AGENTS.md/CLAUDE.md note the brand
exception to the asset rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Smart previews always lived in <library>/Smart Previews, so a large set of proxies
filled the library's drive. The folder is now a per-library setting (prefs.json):
- library.smartPreviewsLocation shows the effective folder (path, count, size,
availability) or changes it; changing it needs an explicit choice for the
previews already built (move, leave or discard), and reset returns to the
library's own folder.
- The new folder must accept writes before anything moves. A folder whose parent
is missing (an unplugged drive) is an error and is never created on the current
drive; building also refuses while a chosen folder is unavailable.
- Building, discarding, status and offline rendering all use the chosen folder.
- Settings -> Performance -> Smart previews shows the path before building, what
it holds, the existing-previews choice, Choose Folder... and Use Library Folder.
The thumbnail cache stays in the library.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Right-clicking a top-level Local location (built-in or the browsed folder) offers
Remove from Local. It only hides the shortcut: the folder, its photos and catalog
membership are untouched. The hidden list is saved with the UI state. While any
location is hidden, "Show N hidden locations" under Browse Folder… restores them,
and choosing a hidden folder with Browse Folder… puts it back. Both actions are
commands (local.hide, local.restoreHidden).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A filter set from the sidebar (By Date), the search field or the filter bar
narrows the current source, but nothing said so: a folder with a hidden date
filter looked empty.
- Chips under the grid header, one per active filter, each with an X that
clears only that filter; "+N more" lists the ones that do not fit; Clear all.
- The header counts "N of M photos" (matching of the source's total) while a
filter is on; the total is cached per source/catalog revision.
- A badge on the top-bar filter icon counts the active filters, filter bar
open or not.
- An empty result says no photos match the active filters, and how many the
source holds, instead of implying the folder is empty.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
rename::expand_tokens is shared by Rename Photos, import renaming and export naming, so {seq:N},
{date:%…}, {camera}, {title}, {ext} work in exports too (a bare {seq} still pads to 3 digits there).
New shared tokens: {num} (number at the end of the name), {folder}, {lens}, {iso}, {rating},
{creator}. An export name that expands to nothing keeps the original name. The MCP export tool
passes startNumber through and documents the tokens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The crop tool fell through to crop.set with an empty object when none of
its parameters were given, so a call with a guessed parameter (e.g.
`aspect: "1:1"`) or `reset: false` answered "ok" and left the photo
unchanged. It now returns an error naming the parameters it needs, as
set_develop already does for an empty call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Point Curve dropdown under the curve graph shows the preset the photo's
point curves match (or Custom) and lists our own built-ins (Linear, Medium
Contrast, Strong Contrast: symmetric S-curves, values chosen here) and the
user's presets; Save Point Curve... names and stores the current four
channels, right-click deletes, Import/Export Presets... read and write
.lccurve JSON files. Presets set only the point curves (parametric curve and
Refine Saturation stay) and are saved with the library preferences.
Engine commands: curve.presets, curve.applyPreset, curve.savePreset,
curve.deletePreset, curve.importPresets, curve.exportPresets; UI commands
file.importCurvePresets / file.exportCurvePresets (file dialogs on desktop).
Fixes#14
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New engine command curve.reset {channel?: all|point|parametric|master|red|
green|blue} (default all = the whole Tone Curve), one undo step, usable from
CLI / MCP / control channel. In the editor: double-click a channel selector
resets that channel, a Reset button under the graph resets every curve
(point curves and parametric), and right-clicking the graph offers
Reset <channel> / Reset All Curves.
Fixes#13
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The editor stored the dragged point index as Option<usize> but read it back
as usize, so the index was lost after the first frame: pressing on a point
did nothing and only click-to-add (overwrite) worked. Points now drag in X
and Y (X clamped between the neighbours), picked at the press origin, with a
grab cursor, a highlighted point and an input/output readout; one undo step
per drag via develop.beginInteraction / endInteraction.
Fixes#12
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Raw variants the decoder can't read yet (e.g. Nikon Huffman-compressed NEF
from a D3200/D5100) silently fell back to the camera's embedded JPEG, so
users edited a JPEG with the camera's picture style (e.g. Monochrome) baked
in without being told.
- catalog: Photo.preview_only (serde default; old catalogs load), set /
cleared by Op::SetContent with an exact inverse; Photo::develops_raw().
- engine: ProbeInfo.preview_only carries the decoder's Unsupported reason
into import, the import review (previewOnly) and catalog.query
(previewOnly); photo.inspect includes it. photo.reload and photo.relink
re-probe and clear/set it when the file decodes (or not) now.
- source_info: a preview-only raw is a rendered source (relative WB scale,
display tone curve) instead of raw:true/5500 K + filmic tone map on a
display-referred JPEG; import uses the JPEG default preset for it; the
Edit panel shows the rendered-file WB sliders.
- UI: "Preview" badge on grid thumbnails, a pill on the loupe, a notice in
Edit and Info (amber caution token, Info icon drawn in code).
- Tests: catalog serde/undo, engine import -> reopen -> reload/relink,
headless UI badge/notice widgets.
Refs #10
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An .lmp look is an XML property list of adjustment layers with named
sliders (newer looks: a Name.lmp/Contents/preset.lmp bundle); an
.mplumpack is a zip of looks plus PresetsInfo.plist (GroupName).
preset.import, the file dialog and drag & drop now accept both. Sliders
with a clear counterpart (exposure, contrast, highlights/shadows,
whites/blacks, WB shift, saturation/vibrance, clarity/structure,
dehaze, HSL, point curves, vignette, grain) map onto develop settings;
the rest is reported in `unmapped`. Looks are named after the look and
grouped by the pack. Tests use synthetic looks and packs only.
Fixes#9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes#11.
Root cause: the grid and the filmstrip remembered the last active photo in egui temp data
with mismatched types (inserted `Option<PhotoId>`, read back as `PhotoId` because of the
`let last: Option<PhotoId> = get_temp(..)` annotation), so the read always missed, "the
active photo changed" was true on every frame and both called `scroll_to_rect` on the
active photo every frame. Any wheel or scroll-bar scroll was undone as soon as the user
stopped (the animated scroll back read as a delayed snap).
- `grid::follow_active` (shared by grid and filmstrip): scroll to the active photo only
when it changed since the strip was last drawn, or when the strip was not drawn on the
previous pass (view switch). Time passing, finished renders, edits and a released scroll
bar no longer move either strip.
- Filmstrip: a vertical mouse wheel scrolls it sideways (horizontal trackpad scrolling
still works); it recentres on a new active photo only when that is off screen, so a
click on a visible thumbnail leaves it alone.
- `ui.inspect` reports `scroll: {grid, filmstrip}`; headless tests in `tests_scroll.rs`.
- docs/parity.md (LR-VIEW-PHOTOGRID, LR-VIEW-FILMSTRIP), docs/control-protocol.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-ups on the contributor's click-zoom:
- Ratios 1:1 (default), 2:1, 3:1, 4:1, 8:1; set through the new
view.clickZoom {ratio} command (bottom-bar dropdown, CLI, MCP).
- Z / Space zoom to the same ratio as a click, with the same ease.
- The loupe requests its render at the final size; the animation only
changes how it is drawn (no render per animation frame). The test
checks every animation frame asks for one render.
- docs/parity.md: LR-VIEW-ZOOM.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Folder read every file on the UI thread before opening the review; on a
NAS (~26k files) the window froze and was dropped. The scan now runs in a
worker (ScanInput/scan_with) and the review opens when it finishes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Soft proofing (S in the loupe; S in grids stays Expand/Collapse Stack):
- pipeline Proof {space, destWarning, displayWarning}: gamut-map into the
proof space, show it in the output space; red/blue gamut warnings
(neutral clipping excluded). CPU only; the GPU path declines proofs.
- RenderJob::with_proof; paper-white surround and Proof Preview label;
Soft Proofing strip under the histogram (profile, warnings, Create
Proof Copy = a named virtual copy). view.softProof for control/MCP.
- photo.virtualCopy takes an optional name.
Mask components: MaskComponent.name; mask.component {component, action:
invert|duplicate|delete|rename|op}; right-click / … menu per component,
double-click rename, Intersect button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- develop.quickAdjust {control, delta}: adds a step to every target photo's own value (one undo
step); the Edit panel shows Quick Develop rows (exposure ⅓ / 1 stop, contrast, highlights,
shadows, whites, blacks, clarity, vibrance, temperature) in the grid with several selected.
- library.findSimilar {id?, similarity?}: look-alike photos by their culling signature (cached
per content), most similar first, as a view filter (Filter.only); photo menu entry.
- develop.matchExposure: selected photos' Exposure set so shutter × ISO ÷ aperture² + slider
matches the active photo; photos without exposure data are skipped.
- Impromptu slideshow row marked (View ▸ Slideshow).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reference photo (photo menu ▸ Set as Reference Photo, or the active photo) shown fixed on
the left beside the active photo on the right, which the Edit panel keeps working on — for
matching a look by eye. View ▸ Reference View (⇧R); reference pane menu ▸ Clear Reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mask.refine (0–100, mask.refine; Masking panel ▸ Refine Edges): after a mask's components are
combined, a guided filter steered by the photo's luminance (window up to ~4 % of the long
edge) snaps soft mask edges to the photo's edges. Rendered on the CPU (the GPU path has no
kernel for it yet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lightcraft-pipeline dust.rs: sensor-dust detection on a rendered image — pixels darker than
their blurred surroundings by more than 3× the local texture, grouped into small (0.15–2 % of
the long edge), roughly round blobs. spot.findDust {sensitivity?, add?} renders the uncropped
photo, detects and adds a heal spot on each (auto source; one undo step). Remove panel ▸
Find Dust Spots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lightcraft-pipeline cull.rs: focus (Laplacian energy of the sharpest 16-px blocks at 512 px,
0–100, calibrated on the CC0 corpus), clipping share and an 8×8 look-alike signature.
photo.analyze scores the selection (else the view), groups look-alike shots taken within 10 s
into bursts and marks each burst's sharpest; optionally rejects photos below a focus score and
picks each burst's best (one undo step). Scores live on the photo (Analysis, Op::SetAnalysis):
rule fields Focus and Best of Similar Shots, Info panel line. Photo ▸ Assisted Culling….
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
folder.rename {path, name} and folder.move {path, into}: the folder is renamed / moved on disk
in one step (its files and sidecars go along) and the photos inside are relinked (and a
browsed folder follows); like the file manager it is not an undo step. Refuses clashes, moves
into itself and the library's own folders. Local folder tree: Rename Folder…, Move Folder To…,
Show in Finder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lightcraft-pipeline gains lut.rs: a .cube parser (LUT_3D_SIZE, DOMAIN_MIN/MAX, TITLE), a
trilinear lookup and an in-process registry; the finishing stage applies a `lut:` profile to
the display-encoded colour, blended by the profile amount (0–200 %); LUT profiles render on the
CPU. profile.import {paths} reads files, folders and zips, copies each LUT into the library's
Profiles/ folder, lists them in prefs and registers them when the library opens; the profile
browser shows them under their folder / zip name; profile.deleteImported. File ▸ Import
Profiles & Presets…, the file picker and drag & drop take .cube files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Keyword painter (tool.keywordPainter {keyword}): Keywords panel ▸ Paint; clicking a photo in
the grid toggles the keyword on it (no selection change), Esc / Stop ends.
- View ▸ Grid Info (view.gridInfo): the square grid's caption shows the file name, the
exposure (1/250 · f/2.8 · ISO 100 · 18 mm) or the capture date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ExportOptions.dng_compression (`dngCompression`: lossless (default) | deflate | uncompressed),
in the export dialog when the format is DNG. Corpus-gated test: all three decode, uncompressed
is the biggest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
photo.setMeta {gps: "lat, lon" | [lat, lon] | null} — decimal, or degrees / minutes / seconds
with N/S/E/W ("48°51'30"N 2°17'40"E"); applied to all target photos, saved in XMP / exports.
Info: the GPS line is an editable field, and Show on Map opens the place in OpenStreetMap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/whats-new.md (release highlights, built into the app) shown by Help ▸ What's New;
Help ▸ Send Feedback… opens a new GitHub issue; the Help menu lists What's New, Keyboard
Shortcuts and System Info together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas
Clément L
storybored379