* M5: draw all ten PDF line-ending styles
Imported lines, polylines and callouts kept Square, Circle, Diamond, Butt, Slash and reverse arrows in /LE but would not redraw them. Those styles now draw, and comment_add and Comment properties can set them.
* hu, uk: Line ending
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Refs #434 (partial). Preserve displayed bounds and standard appearance orientation through stamp edits; image signatures and explicit rectangles remain outside this fix.
Assisted-by: OpenAI GPT-6.1 (gpt-6.1-sol)
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Stamps and added images follow a JPEG's EXIF orientation (part of #434)
Phones store a portrait photo as landscape pixels plus an EXIF
Orientation tag. A JPEG went into the PDF as it was (DCTDecode), and PDF
image XObjects have no such tag, so a photo used as a custom stamp, an
added or replaced image, a watermark or background, or a button image
showed up turned 90 degrees.
Before these images are embedded, a JPEG whose Orientation is not 1 is
decoded, turned the way the tag says and re-encoded (quality 92). Its
JFIF resolution is kept, swapped for quarter turns, so the natural size
on the page stays right. Other images, JPEGs without the tag, JPEGs that
fail to decode and photos over 64 megapixels are embedded unchanged, as
before. Fill & Sign image signatures already applied the tag.
* Image signatures stay upright and anchored on rotated pages (part of #434)
On a page with /Rotate 90, 180 or 270 an image signature turned with the
page, because its picture was drawn along user-space axes while the click
or the "at" argument is a displayed point. It was also anchored at the
wrong point: its left edge and vertical centre were taken in user space,
so on a 90 degree page the image centre ended up elsewhere.
The signature's appearance now carries the counter-rotation as its form
/Matrix, which viewers fit to /Rect, so the picture reads upright as
displayed. The page's rotation is kept in /PCPictureRotate, so restyling
regenerates the same matrix and moving and resizing keep it. The box of the
signature runs along the displayed axes, so its left edge and vertical
centre are where they were asked for. The page view matrix in
pdfcraft-model is split out as view_matrix_for.
The Fill & Sign preview and the live move/resize preview draw the picture
the way the appearance does, and the resize handles keep the image's
proportions as displayed. comment_image_preview reports image_rotation,
how far the image is shown turned (0 for one placed upright).
Custom image stamps are left to #473.
* Use is_multiple_of for the quarter-turn checks (clippy) (#434)
* Probe the pointer preview away from egui_kittest's drawn cursor (#434)
The kittest render paints a mouse cursor (a 16 px triangle with a black outline) at the
hover point, so the 2 pt probe beside the pointer landed on its outline when zoom and view
rotation made 2 pt only a pixel or two. Put the stroke's block at the picture's right end and
probe there and at its far margin instead.
* M5: comments without an appearance stream are drawn (display only, never saved)
#260 (page 7): a FreeText box with /DA and an orange /C background, a
Text note and an Ink stroke, all without /AP, were not drawn; Acrobat,
MuPDF, PDFium and Poppler draw them. The renderer only draws /AP (plus
the Highlight fallback of #274), and pdfcraft-annot, which already
draws all of these for PdfCraft's own comments, can't be used from the
renderer (both are L3).
pdfcraft_annot::with_missing_appearances returns a copy of the document
in which every annotation without /AP /N that appearance::build can
draw (FreeText, Ink, Text, FileAttachment, stamps, shapes, lines,
markup, …) has the appearance build draws from its dictionary; links,
form fields and pop-ups are left alone, as is anything build declines.
The engine keeps that copy, written as an in-memory incremental update,
in a new Document::display: the page view's render pool, page_render
and page images (export_source) read it. Document::bytes, what Save,
signatures and the inspector use, is unchanged. display is rebuilt
wherever the renderer was (open, refresh, scoped refresh) and is bytes
itself when nothing is missing or the document can't be edited.
Tests: annot tests::comments_without_appearances_get_one_for_display_only
(FreeText, Ink and Text get /AP /N in the copy, an existing /AP is kept,
Link, Widget and an unknown subtype aren't touched, the original is
untouched, none means no copy) and engine
tests::comments_without_appearances_are_drawn_but_not_saved (the page
view draws the FreeText background and the Ink stroke, before and after
an edit; the working bytes stay the opened file; Save writes no /AP).
On main the page view shows white where the FreeText box is. Parity:
view.render-annotation-appearances cites the test and notes what's left
(Link borders without /AP, printing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test the Ink stroke on its apex row: Ink is now a curve through its points (#374)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
#260 (page 7) compares PdfCraft with Acrobat, which draws an Ink
annotation's /InkList as a smooth curve through the points;
pdfcraft-annot drew straight segments between them (as MuPDF, Poppler
and PDFium do). A stroke of three or more points is now drawn as a
Catmull-Rom spline through every point, written as cubic Béziers: the
curve leaves each point parallel to the chord between its neighbours,
and an end uses itself as the missing neighbour. Two points stay a
line and one point a dot. This is the appearance PdfCraft writes for
its own ink, signatures drawn with Fill & Sign included, and, with the
display-only appearances for comments that have none, how ink without
/AP is shown.
A curve can swing beyond its points, so a new ink annotation's /Rect
now also covers the curve's control points (the curve stays within
them); before, only the points plus the line-width margin.
Test: annot tests::ink_strokes_are_smooth_curves_through_their_points
checks the exact curve for a three-point stroke, a line for two points,
a dot for one, and a /Rect that holds a stroke whose curve rises above
its highest point (22 on main, 23.667 now). The comment.pencil parity
entry cites it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M5.7: update image signatures live during resize and movement
* M5.7: preserve image signature proportions when resizing corners
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: add calibrated 2D measurement tools
* M12: harden measurement tools for landing (#208)
Bounded snap targets (endpoints only for accepted segments, page-wide cap),
lenient extraction (deep q nesting and undecodable streams are skipped and
reported), per-page snap cache, measure::list reports unsupported entries
instead of failing, closed polygons with a repeated vertex, printable unit
labels (m²), cached panel listing, WinAnsi captions, indirect /VP kept,
measure.export skipped in the command test like other pickers, missing
translations, honest parity (scale and distance partial) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Comments: a text box's rectangle follows its edited text
Editing a text box (or typewriter or callout) rewrote /Contents but
kept the old /Rect: the appearance clipped the new text to the old box
and silently dropped lines that no longer fit, while shorter text left
an oversized box. set_contents now re-measures the text with the same
Helvetica widths as at creation and re-fits the box: the wrap width and
top edge stay, the height fits the wrapped lines. A callout's leader
line keeps its place and re-attaches to the moved box (that geometry
moved from set_rect into a shared apply_text_box). A locked box keeps
its text editable, so it re-fits too.
Covered by annot tests (grow and shrink with nothing clipped, callout
leader re-attach, locked box) and a comment_edit round trip through the
automation tools; parity entries cite them.
Co-Authored-By: GLM <noreply@z.ai>
* Polish edit text and images tool
* feat(edit-text): select source font style
* fix(edit-text): preserve detected PDF font styles
* feat(edit-text): support Japanese replacements
* fix(forms): escape non-ASCII format script strings
* Forms: unwrap_or instead of map_or with identity (clippy map_or_identity)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: GLM <noreply@z.ai>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
annot, compare, content, cos, export, geom, model, ocr, preflight, print and redact have no
production `unwrap`/`expect`/`panic!`/`unreachable!`/`todo!`/`unimplemented!`. The attribute
keeps it that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stable clippy 1.99 denies chunks_exact/chunks_exact_mut with a constant
size (32 sites), which failed the test job on main and every open PR.
Behaviour unchanged; MSRV 1.90 has as_chunks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Márk Bartalos
midasdf
MarekSpodBiedry
cyfung1031
Devon Llewellyn
Ayan
Brandon Thomas
Justin John