In Photoshop a clipping base's Fill opacity fades only the base's own pixels: the clipped layers
show at full strength inside the base's shape (its alpha with masks), and the whole group then
blends in the base's mode at the base's opacity. A base at 0 % fill (an invisible shape or text
with photos clipped to it) still shows its clipped layers. PhotoCraft composited the clipped
layers into the base's content and faded the result by the base's fill, so they vanished.
- CPU: plain, shape and effects bases below 100 % fill build the clipping group in the base's
shape (`clips_by_shape`, `composite_clipped_in_shape`); with effects the base's alpha stays the
effect shape and the group's own alpha becomes a per-pixel fill.
- GPU: the same model in the planner (Lerp by the base's alpha, per-pixel fill in the effect
init), so these documents stay on the GPU and match the CPU oracle.
- A clipped Dissolve layer draws each pixel fully or not at all with the unclipped layer's
noise (CPU atop path and GPU atop kernel), instead of blending as Normal.
Tests: 1x1 expected values (fill 0/50/100 %, group on/off, base opacity, base mask, effects)
at 8/16/32-bit; clipped Dissolve pixel counts, including a Solid Color fill clipped to the
Background; GPU/CPU parity across depths, base modes, opacity, masks and effects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui: a panel expanded from its collapsed strip auto-collapses on an outside click
* ui: test the Auto-Collapse Iconic Panels peek open and outside close
* engine: show Auto-Collapse Iconic Panels in Preferences, it is wired
* docs: scorecard, settings that do nothing 30 -> 29 of 154
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
paint.remove takes several strokes at once (`strokes`) and fills them as one job and one undo
step, so the fill sees every hole together; and `newLayer` writes the fill to a new layer above
the target, only where the hole is, leaving the target as it was (with Sample All Layers it
fills from the composite). The options bar shows Photoshop's three options; with Remove after
each stroke off, strokes collect as a tint on the canvas until Enter or the ✓ applies them and
Esc or ⊘ drops them. Strokes are dropped when the tool or document changes under them.
* engine: expose workspace.enableNarrowOptionsBar through a Workspace helper
* ui: the options bar honors the narrow options bar preference
* docs: scorecard, settings that do nothing 30 -> 29 of 154
* text: missing glyph protection can turn the script fallback stack off (#1909)
* engine: apply type.missingGlyphProtection to the live text engine
* docs: scorecard, settings that do nothing 30 -> 29 of 154
The Character panel (and the Properties Character section) gains
Photoshop's row of eight OpenType buttons: Standard Ligatures, Contextual
Alternates, Discretionary Ligatures, Swash, Stylistic Alternates, Titling
Alternates, Ordinals and Fractions. Each shows pressed while its feature is
on at the selection (else the layer) and toggles it through the existing
type.openType.* command, on the same scope as the other Character controls
(the selected characters while typing, else every selected type layer).
Scorecard TYPE-218-5 stays partial: the Numerals and Stylistic Sets
submenus are still missing.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
File › New › Recent was a hard-coded pair of presets plus Clipboard. Each
document created with the dialog now records its settings (size,
resolution, mode, depth, background, display units) through the new
document.recent.add command: newest first, equal entries collapsed, at most
20, persisted with the presets (a damaged entry is dropped on load, the rest
kept). The Recent tab lists Clipboard, those documents, then the defaults
they don't cover; a click restores every setting, a double-click creates,
and the grid scrolls past three rows. document.recent.list exposes the list
to agents; creation stays in file.new. Closes scorecard row UI-217-12.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Filter > Vanishing Point now opens a dialog mode on the canvas instead of
the generic parameter dialog:
- Create Plane (C): four clicks, in any order, make a plane (corners are
normalised clockwise from the top-left, the order paste expects).
- Edit Plane (V): drag corner nodes, or edge nodes to slide an edge along
the plane's own perspective; click a plane to select it, Delete removes it.
- The plane grid is drawn at the Grid Size, in the accent colour when the
plane is valid, warning yellow when its perspective is doubtful and red
(outline only) when the quad isn't convex (VpPlane::check).
- With an image on the clipboard the selected plane previews it pasted in
perspective; drag to move it, Width sets its size, New Layer renders it
on a new layer. OK / Enter runs filter.vanishingPoint with the planes and
the paste as one history step; the control channel drives the same
session through {"ui": {...}}.
The engine now rejects a drawn plane whose corners don't form a convex
quad (bow-tie, dented) instead of warping along it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The Clone Source panel gets Photoshop's W/H chain (Maintain aspect
ratio): with it on, a new W or H scales the other by the same factor.
cloneSource.set takes "linked" and cloneSource.list reports it.
The overlay's Darken, Lighten and Difference modes were stored but
never drawn. draw_clone_preview now blends the source with the
composite under the brush (clone_source::overlay_blend), so Difference
goes black where source and image line up.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The mesh was every square grid cell touching the layer's opaque pixels:
a staircase up to a cell outside the shape, and shapes closer than about
a cell shared cells, so pinning one dragged the other along.
build_mesh now traces the outline of the opaque region grown (or shrunk)
by Expansion from a signed distance field, simplifies it (Douglas-Peucker,
corners kept), splits its sides to the Density spacing, fills the inside
with a triangular lattice and triangulates the points (Bowyer-Watson
Delaunay, outline sides recovered by midpoint splits), keeping the
triangles inside the outline. Separate shapes get separate meshes, so an
unpinned one stays put, as in Photoshop. Vertices are numbered in reverse
Cuthill-McKee order to keep the solver's banded factor narrow, and the
density's spacing counts the grown region so a large Expansion on a small
layer no longer builds tens of thousands of vertices.
Scorecard TOOL-214-6 done; docs/gaps.md G7 updated.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Curves: pencil mode, Smooth and Edit points (#3088)
The Curves editor (Image > Adjustments dialog and the adjustment layer's
Properties panel) gains Photoshop's "Edit points to modify the curve" and
"Draw to modify the curve" buttons plus Smooth, with tooltips. A drawn
curve is a 256-level map per channel, evaluated piecewise-linearly.
- doc: Adjustment::Curves gains `pencil` (serde default), with
curve_map / curve_map_outputs helpers.
- compose: curve_map_lut / curve_lut_mode for drawn curves.
- engine: curves params take `pencil` and `smooth`; channels accept
256-level maps; switching modes draws the spline into maps or fits up to
16 points to the drawing. Eyedroppers fit points first.
- io: the PSD `curv` map flag (first byte, psd-tools `is_map`) was read
as padding, so pencil curves from Photoshop were misparsed; they are now
read and written as 256-byte maps, and smart-filter Curves use `Mpng`.
- scorecard UI-217-15 note updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: Curves adjustment layers get the black/gray/white eyedroppers (#3110)
The Set Black/Neutral Gray/White Point pickers existed only in the
Image > Adjustments > Curves dialog (#873). The Properties editor of a
Curves adjustment layer now has them too (layer_picker.rs): with one
armed, a click on the image runs one layer.setAdjustment with the new
`eyedropper` param, which samples the image below the layer (the layer
hidden, like its Properties histogram) at the Eyedropper's Sample Size,
so a repeated click keeps the curve and the edit is one undoable,
recordable step agents can send directly. Esc, another tool or another
layer disarms it; ui.pointer and ui.inspect (`layerPicker`) cover it.
Scorecard UI-217-15 is done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge upstream/main: Curves in new compose/gpu HDR tests gets the pencil field (#3088)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Curves: pencil mode, Smooth and Edit points (#3088)
The Curves editor (Image > Adjustments dialog and the adjustment layer's
Properties panel) gains Photoshop's "Edit points to modify the curve" and
"Draw to modify the curve" buttons plus Smooth, with tooltips. A drawn
curve is a 256-level map per channel, evaluated piecewise-linearly.
- doc: Adjustment::Curves gains `pencil` (serde default), with
curve_map / curve_map_outputs helpers.
- compose: curve_map_lut / curve_lut_mode for drawn curves.
- engine: curves params take `pencil` and `smooth`; channels accept
256-level maps; switching modes draws the spline into maps or fits up to
16 points to the drawing. Eyedroppers fit points first.
- io: the PSD `curv` map flag (first byte, psd-tools `is_map`) was read
as padding, so pencil curves from Photoshop were misparsed; they are now
read and written as 256-byte maps, and smart-filter Curves use `Mpng`.
- scorecard UI-217-15 note updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge upstream/main: Curves in new compose/gpu HDR tests gets the pencil field (#3088)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Preferences › Interface › Enable animations (interface.enableAnimations, on by
default). Off, prefs_ui::sync_animations sets egui's animation_time to 0 and
scroll_animation to none in both the dark and light styles, so menus, popups
and collapsing sections change at once and scroll areas jump. It is re-applied
each frame, so a theme change keeps it. Translated in all 16 catalogs; the
scorecard row UI-217-10 goes to partial.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layers panel: Shift+Plus/Minus cycle blend modes; effects dropped on the Trash are deleted (#3102)
- blend_keys.rs: Shift+Plus / Shift+Minus step to the next / previous blend mode, wrapping:
the brush's mode with the Brush or Pencil (tools.setBrush), the Gradient's with the Gradient
tool, otherwise the active layer's (layer.setProps; groups include Pass Through, the
Background is left alone). One undo step per press.
- panels.rs: an effect row dragged onto the footer's Delete button deletes that effect, the
"Effects" row clears the whole style (layer.layerStyle.clear).
- engine: layer.layerStyle.clear takes an optional "effect" index ("Delete Effect" step);
bad indices and layers return Err.
- scorecard UI-217-14 -> done (its wheel, footer drop and thumbnail checker parts were already
on main via #1961, #965).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layers panel: Shift+Plus/Minus step the blend mode on a German layout too (#3102)
On layouts with a key of its own for `+` (German, Italian, Spanish) Shift+`+`
types `*`, which egui has no key for, so egui-winit reports the physical key:
`]` on German. That matched Shift+] (Increase Brush Hardness) before the blend
keys ever saw it. Shift+`-` types `_` and arrives as the physical `/`.
shortcuts::layout_symbols now turns such a fallback press (Shift, the key equal
to its physical key, not a digit, next to the text `*` or `_`) into `+` / `-`
before any shortcut is dispatched. A US Shift+] still arrives as `}` and keeps
raising the hardness; US Shift+8 (`*`) stays a digit for the opacity keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Content-Aware Scale: transform box with live preview (#3096)
Edit > Content-Aware Scale opened a parameter dialog. Photoshop has no
dialog: it puts a scale-only transform box on the layer (or the
selection's bounds). The menu now opens that box.
- The box reuses Free Transform. Corner and edge drags scale and an
inside drag moves; dragging outside does not rotate, Cmd does not
skew or distort, and the Warp switch and the Transform modes are off.
- The options bar shows X/Y and W/H, then Amount, Protect (an alpha
channel) and Protect skin tones.
- The live preview runs the command's own carving
(ContentAwareScalePreview) on a 384 px copy on a worker thread. A
run for a box that has changed since is cancelled after 150 ms, and
the latest result is drawn through the box.
- Enter runs edit.contentAwareScale with the box's size and its new
x/y params as one history step; Esc cancels.
- With params the command still runs directly.
Scorecard TOOL-214-7: done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Move's transform box: set the new content_aware field
#3095 (Transform On Drop) builds a TransformSession by hand; this PR adds
content_aware to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Numeric fields: typed units, scrubby labels, double-click reset (#3099)
- Value fields convert a unit typed after a number into the field's unit
(1in, 2.54cm, 72pt, 1pica/pc, 10px, 50%) at the active document's
resolution; Image Size and New Document use their own resolution. A
unit that can't convert, or bad arithmetic, keeps the old value.
- widgets::scrub_label: dragging a label scrubs the value field right
after it on its row (a step a point, Shift x10, Alt a tenth as fast),
with a horizontal-resize cursor. Used by options-bar labels, slider
rows and the Character panel icons. A slider row reports the scrub as
one drag, so adjustment edits coalesce into one history step.
- Adjustment slider rows with a known default and filter dialog sliders
reset on double-click, like Color Balance already did.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scrubby labels: drag-only, not focusable, so Tab skips them
Sense::drag() is focusable in egui 0.36, so every scrubby label became an
extra Tab stop and tab_focus_reveals_the_final_narrow_tool_option could no
longer reach the last tool option.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Content-Aware Move: Transform On Drop (#3071)
The Content-Aware Move tool gains Photoshop's Transform On Drop checkbox. With it on, the drop
puts a transform box on the moved patch (the Free Transform box's handles, limited to move,
scale and rotate); Enter, the check button or a double-click computes the content-aware blend
with the transformed patch, Esc or the cancel button drops the whole move. The document is
untouched until the commit, so the move stays one History step.
Engine: paint.contentAwareMove takes scaleX / scaleY (%, 1..10000, negative flips) and rotate
(degrees, clockwise) about the selection's centre before the offset, validated (Err, not a
panic, for non-finite, out-of-range or off-canvas placements). The content and the selection's
shape are resampled through the inverse map on float samples (any depth); the selection is
transformed with the content. A plain move keeps the old, exact code path.
UI: cam_transform.rs holds the box (UiState.cam_transform, view state); the option is remembered
in ToolOptions and settable with ui.set camTransformOnDrop; ui.inspect reports camTransform.
Scorecard TOOL-213-4 stays partial: no live preview of the blended result yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: keep Transform On Drop cases in the Content-Aware Move test, not Patch (#3071)
paint.patch takes no scaleX/scaleY/rotate, so those cases (which only
paint.contentAwareMove rejects) failed patch_fails_gracefully. They are
already covered by content_aware_move_fails_gracefully.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
While editing type, a run of clicks at one spot now selects like Photoshop:
two clicks the word, three the laid-out line (a column in vertical type),
four the paragraph up to its hard return, five all text; the next quick
click starts over with a caret. egui stops counting at three, so the Type
tool keeps its own count per layer (next_click_count) and the ranges come
from a pure helper over the text and its layout (click_selection).
Scorecard TYPE-218-8 is done; docs/gaps.md G8 updated.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Every existing save path (layered TIFF, print PDF, ACO/ASE, .shc, Smart
Filters in PSD, atomic-save failure) already has a save-and-read-back
test; SVG and Photoshop PDF have no writer yet (FILE-215-10).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tools: Artboard tool (#2858)
Photoshop's Artboard tool in the Move flyout (V, ⇧V cycles Move ↔ Artboard):
dragging on an empty spot draws a new board (`layer.new.artboard`), clicking a
board selects it, dragging it moves it with its contents, and the selected
board's edge and corner handles resize it (`layer.artboard.set`,
moveContents: false). Each gesture is one undo step. Options bar: Size preset,
W/H, Make Portrait, Make Landscape, Add New Artboard. Original toolbar glyph
(assets/icons/artboard.svg, ATTRIBUTION.md row).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Artboard tool: '+' buttons add a board beside the selected one; ⇧ keeps proportions (#3033)
With the Artboard tool, the selected board shows a "+" button beside each
side. A click adds an empty board of the same size (background and preset
copied) on that side, the 100 px artboard gap away and past any board in
the way; ⌥-click adds a copy with its contents instead. A board left of or
above the canvas origin shifts the whole document right/down and grows the
canvas, so it stays visible. Both go through the new engine command
`layer.artboard.addBeside` {layer?, side, duplicate} (one undo step).
⇧ while dragging a corner handle keeps the board's aspect ratio: the
opposite corner stays and the board scales by the larger axis factor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Paths: Stroke Path with any brush-based tool and Simulate Pressure (#2978)
path.stroke now takes every brush-based tool of Photoshop's Stroke Path
dialog: besides the Brush, Pencil and Eraser it renders itself, the
Background Eraser, Clone and Pattern Stamp, Healing and Spot Healing
Brush, History Brush, Blur, Sharpen, Smudge, Dodge, Burn, Sponge, Color
Replacement and Mixer Brush run their paint.* command along each
subpath, in one history step, with only path.stroke journalled.
simulatePressure resamples each subpath and ramps the pressure from 0 at
its start to full at the middle and back to 0 at its end, so a brush
whose size follows pen pressure tapers at both ends.
The Stroke Path dialog (Pen/Path Selection right-click menu, the Paths
panel row menu, Alt-click on the panel's Stroke button) asks for the
tool and Simulate Pressure, as in Photoshop. Scorecard TOOL-214-11 done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: classify path.stroke's params as a document vector path (#2978)
The new Stroke Path params doc says the tools run "along the path", which
registry_filesystem_path_params_are_classified reads as a possible host
file path. path.stroke strokes a document path and forwards only to
paint.* commands that take no files, so it joins the vector-path list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A file with no embedded ICC profile whose EXIF ColorSpace tag says sRGB
(what cameras write) now opens as sRGB, as in Photoshop: it is tagged
sRGB before the Color Settings policy runs, so it is kept, reported as a
mismatch, or converted like any embedded profile. Before, it was read as
untagged and took the working space, so with a wide working space such
as Display P3 its colours were reinterpreted.
Preferences › File Handling › Ignore EXIF Profile Tag (off by default)
restores the untagged reading, and is now shown in the dialog.
photocraft_codecs::exif_color_space reads the tag from the Exif sub-IFD,
bounds-checked; anything malformed reads as no tag. Settings that do
nothing: 43 → 42 of 150.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Type: ask to rasterize before Warp on live type (#3004)
Edit › Transform › Warp (the menu, or the warp toggle of an open transform
box) on editable type opened Warp mode, let the user shape the mesh, then
failed on commit with "Warp needs rasterized type". It now opens Photoshop's
"This type layer must be rasterized before proceeding…" prompt, the one the
pixel tools already use. OK applies an open transform box, rasterizes the
type (its own history state) and opens Warp on the pixels; Cancel does
nothing. The prompt's continuation is a menu command from an allow-list,
run with the egui context right after the confirm (control channel, OK
button) or on the next frame.
Distort and Perspective stay greyed for type (#2701), Puppet Warp and
Perspective Warp stay greyed for non-pixel layers, as in Photoshop.
Scorecard TYPE-218-9 -> done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Type: Warp on live type takes the warp styles, no rasterize prompt (#3004)
Photoshop 2026 keeps Edit › Transform › Warp enabled on live type and asks
nothing: the mesh can't be dragged, only the options bar's warp styles
(Warp Text's) apply, and the type stays editable. The earlier version of
this change asked to rasterize first; that is gone (and with it the prompt
continuation, which nothing else used).
Warp mode on a type layer now starts from the layer's own Warp Text style
over the unwarped type, ignores mesh drags and splits (Split, Grid and the
Custom style are greyed/hidden, the split menu items are greyed), and the
commit runs edit.transform.warp, which on type sets the Warp Text: one
history step, recordable, the layer stays Text. None takes a warp off. A
box scaled or rotated before toggling Warp is applied first.
Scorecard TYPE-218-9 note updated: Photoshop doesn't prompt for Warp;
Distort and Perspective stay greyed (#2701).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Alt during a drag unlinks the handle pair (only the outgoing one keeps following),
Alt-press on the last anchor's outgoing handle turns that handle alone, and pressing
the first anchor now closes on release, so a drag pulls out that anchor's handles
(a stand-in knot folded into the first one on commit). A plain click still closes
without touching the first anchor's handles. Still one History step per path.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Select and Mask: Output To New Document, with or without a layer mask (#2998)
select.refineEdge takes output newDocument / newDocumentWithMask: a new
document like the source (size, mode, depth, resolution, profile) with
the active layer cut out by the refined edge, or with the matte as a
layer mask. The source document is left untouched. The dialog's Output
choice lists all six targets, translated in every catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: drop the duplicate pt-br New Layer row (main already has it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* File Handling: wire Image Previews to embed a PSD thumbnail (#204)
Preferences > File Handling > Image Previews is live for PSD/PSB saves. With
Always Save (the default) and Ask When Saving, the file carries Photoshop's
thumbnail image resource (1036: the 28-byte kJpegRGB header and a JFIF stream,
at most 160 px on the long side); Never Save writes none. The thumbnail is the
reduced composite converted to sRGB through the document's profile with
photocraft-cms (8/16/32-bit; Gray, CMYK and Lab become RGB), over white where
transparent. Ask When Saving has no Save As checkbox yet, so it saves the
preview, as Photoshop's checkbox starts on.
The preference reaches Save, Save As, Save a Copy and automation saves in the
app (ExportSettings.image_previews), and the engine's headless saves
(file.saveACopy, batch, Layers/Comps/Artboards to Files) through SaveOpts.
photocraft_io::ExportOptions gains image_previews (default on).
Settings that do nothing: 32 of 153 (#204).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* File Handling: rustfmt the Image Previews save path
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The Character section (Properties and Window > Character) shows one slider
per axis of the style's variable font below the font style (Weight, Width,
Slant, Italic, or the font's own tag), setting type.setStyle variations; a
drag is one history step. Optical size has no slider: the layout now sets
opsz to the type size unless the style sets it, as CSS font-optical-sizing
auto. Picking a font style or weight resets the wght axis to it, so an
earlier slider value no longer overrides the style the dropdown shows.
Scorecard TYPE-218-4 -> done.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Select and Mask: live preview in Photoshop's view modes (#1754)
The Select and Mask dialog had no preview of the refined selection. It now
previews live in Photoshop's view modes: Onion Skin (default), Marching
Ants, Overlay, On Black, On White, Black & White and On Layers, with a
per-view Opacity, Show Edge (J) and Show Original (P). F cycles the views,
O/M/V/A/T/K/Y pick one and holding X shows the image without a view.
The view state lives in the dialog's fields, so ui.dialog.set drives it.
The preview runs select.refineEdge on the proxy with output=selection and
builds the view from it (veil fill layers, a layer mask, or the refined
selection, whose marching ants the canvas draws scaled back up), through
the existing filter-preview worker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Select and Mask: Refine Edge Brush (#2972)
Select and Mask had no Refine Edge Brush. select.refineEdge now takes
refineStrokes: [{"points":[[x,y],...],"size":px,"mode":"add|subtract"}],
applied in painting order. Added areas become unknown and take a colour
estimate: each pixel's colour projected on the line between the mean known
foreground and background colours around it (normalised convolution over
a box of the brush size, four times as far where none are near), so hair
or fur beyond the edge-detection band joins the selection. Subtracted
areas keep the original edge. Malformed or oversized strokes are rejected
(stroke / point / swept-area limits), never a panic.
The dialog gets the brush: Refine Edge Brush (R), Mode (Expand Detection
Area / Restore Original Edge, Alt swaps), Size ([ and ]) and Clear Brush
Strokes. With it on, dragging on the canvas paints strokes into the
dialog's refineStrokes field, so the live preview, Show Edge and OK use
them, and ui.dialog.set / agents drive them like any other param.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Color Sampler tool (#1046)
Add the Color Sampler to the Eyedropper (I) flyout: click to pin numbered
sample points to canvas pixels, drag to move, Alt-click (or drag off-canvas)
to remove, Clear All in the options bar, at most 10 per document. Each point
reads one composite pixel (RGB 0-255 and naive device CMYK, same as the
pointer readout) and the Info panel lists them under their number with the
position in the ruler unit; the readouts refresh when the document changes.
Points are per-document engine view state (DocState.color_samplers): they
belong to their document, are discarded on close, and are not saved to
.pcraft or PSD. They are driven by commands shared by the UI, CLI, control
channel and MCP (view.colorSamplers.add/.move/.delete/.clear/.list); the
mutations change no pixels and add no History step.
Points follow the canvas geometry (crop, Canvas Size, Image Size, Image
rotation/flip, rotated crop) through a pending Session.sampler_map that
Session::edit applies before culling the points that land outside the new
canvas; the count removed is reported in the status bar.
- engine: new sampler_cmds.rs (commands + shared readout helpers) and the
sampler_map wiring in lib.rs, image_cmds.rs, mode_cmds.rs, commands.rs,
analysis_cmds.rs (compound rolls points back on error).
- ui-egui: Tool::ColorSampler + original sampler.svg icon, toolbar slot,
Info panel list, options bar, pointer handling, overlay markers, cursor.
- docs/scorecard.md regenerated (TOOL-1649-1 no longer says the tool is
missing). No menu item, so parity is unchanged (627/627).
* Color Sampler follow-up: tool count, README, i18n, roadmap
The full ui-egui suite (not just the filtered tests) surfaced these gaps:
- state.rs: Tool::ALL.len() assertion 52 -> 53.
- README.md: "52 tools" -> "53 tools" and add Color Sampler to the list,
so readme_tool_list_matches_tool_all passes.
- i18n: the options-bar hint, "{n} of {max} sample points" and
"No document open" need entries in every catalog that claims complete
menus (every_tl_literal_is_translated); added to all 16 (coverage
1584/1584). The translations were drafted alongside the tool.
- docs/roadmap.md: drop Color Sampler from the missing-tools list and note
it landed.
* Color Sampler: fit main's new tools and Image Size resample type
Reset Tool covers ColorSampler, the test ViewXform sets aspect, and
Image Size checks Method::None instead of an Option.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- menu_catalog: add Type › Anti-Alias › None before Sharp, as in Photoshop.
It used to come from the engine list, appended after Windows and built
without a checked state, so a layer set to None showed no check.
- view_cmds::type_checked reads type_tool::target_text (the edited layer,
else the active or a selected type layer), as the options bar and the
Type commands do, not only the active layer.
- Anti-alias and orientation items stay check items (Some(false)) with no
type layer, so the native menu doesn't rebuild.
- Parity floor 629 -> 630; docs/parity-checklist.md regenerated.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): respect native desktop scale under Auto UI scaling (#1278)
* UI scale: drop the now-unused monitor size, update docs and scorecard
Merge main; Auto no longer reads the monitor size, so remove the parameter and its
computation, simplify the test, and update ui-design.md and UI-217-9 to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Select and Mask dialog had no preview of the refined selection. It now
previews live in Photoshop's view modes: Onion Skin (default), Marching
Ants, Overlay, On Black, On White, Black & White and On Layers, with a
per-view Opacity, Show Edge (J) and Show Original (P). F cycles the views,
O/M/V/A/T/K/Y pick one and holding X shows the image without a view.
The view state lives in the dialog's fields, so ui.dialog.set drives it.
The preview runs select.refineEdge on the proxy with output=selection and
builds the view from it (veil fill layers, a layer mask, or the refined
selection, whose marching ants the canvas draws scaled back up), through
the existing filter-preview worker.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences › Units & Rulers › New Document Preset Resolutions did nothing:
Print Resolution was hidden as unread, and the File › New presets always used
300 / 72 ppi. As in Photoshop, print and photo presets now keep their size in
inches at the Print Resolution (Letter at 200 ppi is 1700 x 2200 px), and
screen presets keep their pixels at the Screen Resolution. The Clipboard
preset keeps the copied pixels. Values that are not positive and finite (a
hand-edited preferences file) leave the preset as listed, and sizes clamp to
the file.new limit.
Print Resolution is now shown in the Preferences dialog; settings that do
nothing: 43 -> 42 of 150.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Mirror the shell for right-to-left UI languages (DIST-220-4)
Arabic, Hebrew, Persian and Urdu read right to left, but the window's
chrome was hard-wired left to right, so an RTL catalog (#2505) would
put Arabic labels into a left-to-right layout.
The reading direction now follows the language code
(i18n::dir_for_code: ar, ckb, dv, fa, he, ps, sd, ug, ur, yi), so a
catalog needs no extra setting and the LANGUAGES rows are unchanged.
In a right-to-left language the shell mirrors:
- the menu bar starts at the right with File; menus open under their
title's right edge, and the arrow keys step through them in screen
order
- the toolbox docks on the right, the panel dock and its rail on the
left; tool flyouts open towards the canvas and their corner marks
and the header chevrons follow
- the title, options and status bars read from the right, with the
workspace controls and the Fit/progress group at the left end; the
title and window-drag gap use the free span between them
New module direction.rs holds the helpers (start_panel/end_panel,
row/trailing layouts, horizontal_centered, the popup alignment). Left
to right, every change lays out as before.
No RTL catalog ships yet, so PHOTOCRAFT_UI_DIRECTION=rtl forces the
mirrored layout for review (read once, native only). Panel interiors,
dialogs, menu rows, submenus and document tabs stay left to right, and
egui still draws UI labels without Arabic shaping or bidi reordering;
docs/localization.md and the parity docs say so.
Adds Lucide's chevron-left (the status bar's info menu arrow points
left in RTL; Timeline's Previous frame button asked for it too and drew
the fallback square).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Localization docs: egui shapes Arabic words; what's missing is a font and bidi word order
egui 0.36 shapes right-to-left runs with HarfRust, so letters join within
a word. The gaps are an Arabic fallback font in the UI and paragraph bidi
(words are placed left to right; emilk/egui#8576, #8577).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: MathMattTech <334629259+MathMattTech@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
View › Rulers (⌘R) now writes unitsAndRulers.showRulers, which is applied
at launch and whenever the preference changes, so new and opened documents
show the rulers as last set, as in Photoshop. The Preferences dialog doesn't
list it: the View menu sets it.
Guides are Vec<f64> (doc, New Guide/Move Guide, guide layouts, artboard and
canvas geometry, snapping, PSD resource 1032), so a guide placed in ruler
units or read from a PSD's 1/32 px positions keeps its exact place.
Scorecard UI-217-20 done (part of #217).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Text fields: right-click edit menu (#2921)
Right-clicking in any text field (layer rename, a number field being
typed into, dialog and panel fields) opens Undo, Cut, Copy, Paste,
Delete and Select All at the pointer, acting on that field. A
right-click inside the selection keeps it, Esc closes only the menu,
and clicking the menu doesn't take the field's focus (the layer rename
would commit). The right-click never reaches the canvas or tool menus.
An egui plugin (text_field_menu.rs) opens and closes the menu for
every TextEdit; the app draws it before any field, so a chosen item is
handed to the field as its keyboard input in the same pass. Paste asks
the window for the clipboard text like Cmd+V in a field. No spelling
suggestions: there is no spell checker (UI-217-8 stays partial).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Text field menu: correct the spell-checker note (#2921)
PhotoCraft has a spell checker (edit.checkSpelling with a suggest
action); it just isn't wired into the text-field context menu yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Context-menu parity doc: same spell-checker correction (#2921)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > Type > Show Font Names in English (default on) now drives the
font menus (Type options bar, Character panel, style and Glyphs panels). With
it off, a family whose name table carries a non-English family name (e.g.
"MS Gothic" -> "ＭＳ ゴシック", "Microsoft YaHei" -> "微软雅黑") is listed by
that native name, sorted by the shown label, and the search matches either
name. Choosing it still applies the English family, so documents and PSD
output never change with the preference.
- text: FontDb::localized_family_names() reads each family's first face
(typographic family name, else family name) and a pure localized_name()
picks the first non-English record.
- ui-egui: sync_font_names() publishes the labels to the egui context once a
frame (cached per font generation); family_picker_in shows them.
- prefs: the row is no longer hidden; scorecard: dead settings 43 -> 42.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Every effect with a contour (Drop/Inner Shadow, Outer/Inner Glow, Satin,
Bevel & Emboss Gloss Contour and Contour element) now shows a contour
thumbnail with a preset picker and an Anti-aliased checkbox. Clicking the
thumbnail opens the Contour Editor: add/drag/delete points (the shared
point-curve editor), Corner per point, Input/Output, Preset, and Load…/Save…
of .shc contour files, read and written from Adobe's public File Formats
Specification (Contours). Edits go to the dialog's pending params, so the
preview follows and OK applies them in the one layer.layerStyle.replace.
- doc: Contour::Custom gains per-point corner flags (serde default).
- compose: contour_curve_lut splits the spline at corner points; CPU and
GPU effects use it.
- engine: the 12 standard presets with our own control points (older names
still accepted); `contour` params also take a curve object
{name, points, corners}; antiAlias params; Satin contour; the bevel
Contour element edits in place; contours_from_shc / contour_to_shc.
- io: PSD contour points read and write the Cnty (continuity) flag.
- psd: shc.rs parser/writer.
- scorecard FILE-215-15 missing -> partial.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tools: wire Enable Flick Panning for the Hand tool (#204)
Preferences > Tools > Enable Flick Panning (default on) was never read.
Like Photoshop, a Hand drag (the selected Hand, the Space-held Hand or a
middle-button drag) released while the pointer is still moving now keeps
the view gliding that way and slows smoothly to a stop; a click, new drag
or key press stops it. Off, the view stops where the drag ended.
flick_pan.rs holds the pure state: the release velocity from the last
80 ms of drag steps, an exponential friction step (tau 0.18 s, so a fast
flick rests in under a second), a start/stop speed threshold, and clamps
for huge, NaN or infinite numbers. The canvas drives it per frame with
request_repaint only while gliding; with Overscroll off the glide is
clamped like the scrollbars and stops at the pan limit.
Settings that do nothing: 43 -> 42 of 149 (docs/scorecard.md).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Preferences: show Enable Flick Panning now that the Hand tool reads it (#204)
Remove tools.enableFlickPanning from prefs::HIDDEN_UNTIL_IMPLEMENTED so the
prefs_usage test passes and the dialog shows it; regenerate the scorecard
(settings that do nothing: 36 of 153) and mark flick panning done in
docs/ui-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Preferences: wire Tools › Show Transformation Values (#204)
The size and angle readouts beside the pointer (marquee W/H, Crop frame
W/H and angle, Crop Straighten angle) now go through
canvas::draw_value_readout, which draws them only while
tools.showTransformationValues is on, as in Photoshop. The brush HUD
isn't a transformation value and keeps drawing.
The preference leaves HIDDEN_UNTIL_IMPLEMENTED, so Preferences › Tools
shows it (its label is already translated). Settings that do nothing:
43 → 42 of 149.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: add my display name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* feat(engine): Always Create Smart Objects When Placing gates the Place layer kind (#204)
* scorecard: regenerate after wiring Always Create Smart Objects When Placing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* scorecard: eight Open bugs rows describe work that is already in the tree
AGENTS.md sends contributors to the scorecard's missing and partial rows when
picking work, so a stale row costs someone a session: they sit down to write a
test that is already there. These eight ask for work that exists and is covered
by passing tests.
#205 / #207, mask and channel transforms:
- BUG-205-4 ("no raster-mask test"): linked_raster_mask_moves_with_the_pixels.
- BUG-205-5 ("the other two not implemented"): all three cases are covered, by
linked_mask_with_a_selection_moves_only_the_selected_region,
unlinked_mask_stays_put and targeted_unlinked_mask_transforms_alone.
- BUG-207-4 ("transform() has no target handling"): edit.transform takes target
(pixels, mask, quickMask or {channel: i}) and documents it in its params doc;
targeted_alpha_channel_transforms_alone covers the alpha channel.
#206, kerning — the whole section:
- BUG-206-1: CharStyle has both `kerning: Kerning` and `kern: f32`.
- BUG-206-2 / BUG-206-3: io/tests/psd_kerning.rs round-trips manual, Off and
Optical kerning, and reads the AutoKerning flag and Kerning value of every
character back out of the written TySh.
- BUG-206-4: Alt+Left/Right at a collapsed caret calls kern_pair, and the
Character panel field parses Metrics / Optical / a manual value; both tested.
- BUG-206-5 stays partial, not done: the round trips are covered, but no oracle
corpus file is dedicated to kerning values, which that row also asks for.
FILE-216-5 keeps its missing status (no save-path tests for layered TIFF, PDF,
SVG, ACO/ASE, .shc or Smart Filters), but its note claimed there is no
atomic-save failure-injection test; format/src/atomic/tests.rs has two, and
BUG-203-6 already records them as done.
docs/scorecard.md regenerated with cargo xtask scorecard; Open bugs moves from
22/2/8 to 29/2/1.
* scorecard: the Type section's kerning and Thai rows are out of date too
TYPE-218-6 ("Optical renders as Metrics; Alt+arrow moves by word") is done:
Alt+Left/Right at a collapsed caret calls kern_pair, optical kerning is computed
from the glyph outlines in text/src/optical.rs and applied by layout.rs when the
run's mode is Optical, and both modes round-trip through PSD. Covered by
type_tool_alt_arrows_kern_the_pair, optical_matches_photoshop,
optical_kerning_tightens_open_pairs, txt2_carries_optical_kerning and
io/tests/psd_kerning.rs. The row points at #206, whose own rows are in the same
state.
TYPE-218-3 goes to partial, not done: Thai is covered (THAI_FAMILIES in fonts.rs
and thai_in_latin_font_falls_back_to_installed_thai_font, #1909), but Khmer and
Indic have no fallback list and there are still no per-script golden tests.
Unchanged because they read correctly: TYPE-218-1 (TextShape is still Point and
Box), TYPE-218-2 (no direction UI), TYPE-218-4 (the axes in the shell are the
brush's), TYPE-218-8 (no triple or quadruple click) and TYPE-218-9.
* scorecard: Tools and Distribution rows are out of date too
TOOL-213-7 ("Live stroke only for Brush and Eraser"): canvas.rs strokes_live
covers Brush, Pencil, Eraser, Blur, Sharpen, Smudge, Dodge, Burn and Sponge,
and live_retouch_command adds the Clone Stamp, Healing Brush and History Brush.
TOOL-214-8 ("ruler only feeds straighten"): image.rotation.arbitrary opens
seeded with the measured ruler angle and the direction that straightens it;
arbitrary_rotation_starts_at_the_ruler_angle checks 5.7106 deg within 1e-3 and
the direction for three lines.
TOOL-214-5 goes to partial, not done ("No context menu in canvas.rs or
transform_tool.rs"): TRANSFORM_MENU does open on a right click during a
transform, with Free Transform, Scale, Rotate, Skew, Distort, Perspective and
Warp, and three tests cover it — but the row also asks for Flip and
Rotate 90/180, which are not there.
DIST-220-2 ("release.yml only x86_64 and i686 msvc"): the Windows matrix has
{ arch: arm64, target: aarch64-pc-windows-msvc }, and windows-arm64.yml
installs that MSI on a Windows 11 ARM64 runner, checks the binaries are ARM64
and runs the CLI natively. Signing takes the same path as x64 (DIST-2).
Unchanged because they read correctly: the whole Automation section (ABI_VERSION
is still 1 with Kind::Filter only, there is no ONNX dependency, no such xtask
check, and agent_tasks.rs really does run ten scripted tasks), TOOL-213-12,
TOOL-214-4, TOOL-214-6, DIST-220-1 and DIST-220-3.
* scorecard: Workspace and UI and File compatibility rows are out of date too
UI-217-9 ("prefs.rs UiScale unused"): prefs::UiScale offers Auto plus 75 to 300
percent, display_scale resolves it and sync_display_scale applies it with
ctx.set_zoom_factor; being a preference, it is remembered. The zoom_factor
assert the note cites is in a canvas-zoom test, checking that zooming the
document does not scale the interface.
FILE-216-1 ("No corpus step in ci.yml; in progress in #190"): ci.yml has a
corpus job on every PR and on main, pinned, sha256-verified and cached by the
pins. #190 is merged.
UI-217-22 and UI-217-23 go to partial, not done:
- layer.stampVisible merges the visible layers into a new layer and leaves the
originals, and layer.stampDown exists, but neither has a menu entry and
Alt+Merge is still missing.
- layer.copyToDocument copies layers into another document keeping masks,
styles and blending (#589), but there is still no copy/paste layer clipboard.
UI-217-11 keeps missing; only its note changes, from "five themes" to the eight
ThemeKind has. No Soft dark/Soft light, previews or outlined knobs.
Unchanged because they read correctly: UI-217-20 (guides are still Vec<f32> and
there is no rulers preference), FILE-215-6 (SmartObject.transform is still an
Affine), FILE-215-19 (no JPEG Options dialog), and the rest of both sections.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop's Artboard tool in the Move flyout (V, ⇧V cycles Move ↔ Artboard):
dragging on an empty spot draws a new board (`layer.new.artboard`), clicking a
board selects it, dragging it moves it with its contents, and the selected
board's edge and corner handles resize it (`layer.artboard.set`,
moveContents: false). Each gesture is one undo step. Options bar: Size preset,
W/H, Make Portrait, Make Landscape, Add New Artboard. Original toolbar glyph
(assets/icons/artboard.svg, ATTRIBUTION.md row).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
With Auto-Select on (or Cmd held with it off), a Move-tool drag that starts where
no layer has pixels (an empty spot, or the pasteboard) now draws a marquee instead
of moving the previously selected layer. Releasing selects every layer whose
content touches it (Auto-Select: Group selects their outermost groups); Shift adds.
New engine command layer.selectInRect; the UI side lives in move_box.rs.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
edit.transform without a "target" (or "layer") param now follows the
Channels panel: a targeted alpha channel or the Quick Mask transforms
instead of the layer. Edit › Transform › Rotate 180°/90° and Flip
Horizontal/Vertical are routed to the panel target like the paint and
filter commands, so they turn a targeted alpha channel, the Quick Mask or
an unlinked layer mask within its frame (one undo step). The Background
no longer greys the transforms when a channel is targeted.
Flips scorecard row BUG-207-4.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Free Transform context menu listed only the modes. It now follows
Photoshop's order: the modes, then Content-Aware Scale and Puppet Warp
(greyed while a box is open), Rotate 180°, Rotate 90° CW and CCW, and Flip
Horizontal and Vertical.
The Rotate and Flip items, whether chosen from this menu, Edit › Transform,
a shortcut or the control channel, now turn or mirror the live box about its
reference point without committing it (transform_tool::intercept). Before,
they ran the engine preset on the layer under the open box. They are greyed
while warping. Distort and Perspective are greyed over a box on editable
type, matching #2701. A control-channel right-click during a transform opens
the same menu as the canvas.
Scorecard TOOL-214-5 is now done.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tools: remember tool options between launches (#2814)
The options-bar settings in ToolOptions (Move > Auto-Select, marquee
Feather, tolerance, gradient style, crop ratio, eyedropper sample, ...)
only went through serde for Tool Presets, so every launch started from
the defaults. Photoshop keeps each tool's options between sessions.
Preferences gain `toolOptions` (shell-owned JSON, like brushPicker): the
fields that differ from their defaults, saved once the pointer is up and
restored at launch field by field. An unknown key is ignored; a field
that doesn't read back (wrong type, a number out of f32 range) keeps its
default with a log warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge upstream/main into fix/2814-persist-tool-options; regenerate docs/scorecard.md
The branch adds a preference, so the prefs audit count in docs/scorecard.md changes
(CI's xtask scorecard staleness test).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Crop tool: New / Delete Crop Preset saves and removes user presets (#1919)
The Crop options-bar dropdown ends with New Crop Preset... and Delete Crop
Preset..., as in Photoshop. A crop preset is a "crop" tool preset
(tool.presets.*, persisted with the preferences), so it also shows in the
Tool Presets panel. New saves W x H x Resolution (W, H, resolution and
unit) or a ratio under a name made from the values; it is greyed out with
nothing to save. Delete lists the saved crop presets for a multi-select;
built-in size presets stay. The dropdown shows the preset the fields hold.
Engine: tool preset names are checked (1-255 chars) and the store capped;
saved tool presets load entry by entry so a damaged one is skipped; a
multi-name delete is all or nothing. ui.dialog.open gains newCropPreset /
deleteCropPreset.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Regenerate the scorecard after rebasing onto main
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Brandon Thomas
Reynold Hu
Diego Chagas
David Mann
Valentin Klein
Timothy Daly
Roaldo Sulejmani
Dylan M. Taylor
Paulo Vinicius
MathMattTech
Erica Franco