A configuration that passes the preflight can still fail when uninstall
rereads it to edit, for example when it changes concurrently. Rereading
keeps that edit from overwriting the newer file; stopping at the failure
keeps later clients, the skill, and REA data from being removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The installation guide says malformed client configuration stops
`rea uninstall`, but uninstall reported that client as failed and still
removed other clients' registrations, the bundled skill, and with
--purge-data REA's cache and state.
Inspect every client configuration first, using the conditions setup
already treats as blocking (unsafe path, unreadable file, malformed
document), and stop before any removal when one fails. Purge paths that are
symbolic links are still retained and reported per item, as the guide now
states.
Fixes#1164
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Newer lipo names arm64e ABI variants `arm64e.<variant>`: `arm64e.v1` for
pointer-auth ABI version 1 on freshly built universal binaries, and
`arm64e.x1` on recent macOS system binaries such as /bin/ls. The
structural FAT parser names the same slice `arm64e`, so the exact name
comparison failed and inspect_artifact reported a valid, unmodified
universal binary as an integrity mismatch ("Artifact is invalid or has
changed").
Accept `arm64e.<variant>` for an `arm64e` FAT slice. Offset, size, CPU
type, subtype (including the pointer-auth version bits when lipo prints
them) and alignment are still compared field by field. The slice keeps
lipo's name in its logical path.
Fixes#1168
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two follow-ups to #1161 from its post-merge review:
- The new format preflight ran before scanArtifactInventory, which was
the first cancellation check. An already-cancelled extraction of a
DMG or PKG therefore reported unsupported_target instead of
cancellation. Check the signal before the preflight.
- The unsupported-format and encrypted-entry refusals reported the
realpath. When the caller selected the target through a symlink,
junction, or other alias, the diagnostic named a different path.
Report the caller's input path; I/O still uses the canonical path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
extract_artifact on a ZIP containing a password-protected entry failed
the whole extraction with "Artifact is invalid or has changed. Get a
fresh copy" and named only an opaque occurrence ID. The archive was
intact; REA does not decrypt entries, so complete extraction is
unsupported for this target.
Raise AnalysisUnsupportedTargetError naming the encrypted entry's path.
Other unextractable occurrences keep their format failure but now name
the logical path alongside the occurrence ID.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
extract_artifact on a format without an extraction reader, such as a
DMG, first ran the full inventory scan (mounting the image) and then
failed with an `unavailable` artifact failure: "Check artifact support
and required tools". The target format, not the host, is unsupported.
Check the format before any inventory or output work and raise
AnalysisUnsupportedTargetError, which the provider now keeps, as it does
for the other target-kind checks in this PR.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Outside Darwin the session reports inspect_asset_catalog as unavailable
on the host before the provider checks the target kind, so the Linux
test shards would see capability_unavailable rather than
unsupported_target.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
decode_interface_builder, inspect_asset_catalog, inspect_keyed_archive
and trace_dylib_resolution refused a target of the wrong kind (for
example a plain Mach-O for the asset catalog, or a plist for dyld
tracing) as an `unavailable` artifact failure: "Artifact processing is
unavailable for the current target or host. Check artifact support and
required tools." Nothing was missing on the host; the operation does not
support that kind of target.
Raise AnalysisUnsupportedTargetError for these checks and let
translateFailure keep it. The result is now `unsupported_target`, naming
the operation, the target path and the requirement, with advice to pick
a supported target or another operation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
trace_dylib_resolution blamed the artifact for the caller's root
selection. A missing root, a directory, or a symlink leading outside the
bundle got "Artifact contains an unsafe or conflicting internal path ...
correct the artifact". A non-Mach-O file such as Contents/Info.plist got
"Artifact is invalid or has changed. Get a fresh copy". Any schema
failure, including a bad architecture, was reported as "roots must be
normalized paths".
Report a caller-selected root that cannot be traced as an
invalid_request issue on roots[i] with the failed constraint, and
project schema failures through their real issues. The normalized-path
rule now carries a readable message. Roots REA derives itself (bundle
executables or the active target) keep reporting artifact failures.
This matches what #1070 did for inspect_keyed_archive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(javascript): omit self-referential static references with disclosure
A bundled module that requires its own key (`r(50)` inside webpack
module 50) resolved, through the static-reference composer, to its own
module node. The resulting self-referential imports edge failed result
validation and lost the entire analysis ("Result schema rejected 1
issue ... (custom)"). This is the same invariant as #1146; #1152 fixed
the bundler async-chunk composer, and this is the remaining adjacent
composer.
Skip a reference whose resolved target is its own source, count it, and
disclose the omission the way #1152 discloses async-chunk references.
Sibling requires are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(javascript): share the self-reference omission disclosure
The self-import (#1130), async-chunk (#1152) and static-reference
disclosures repeated one sentence template in three composers, and the
new test repeated the analyze-and-check sequence of its neighbour. That
put jscpd at its 2.5% threshold. Share the template through
selfReferenceOmissions with identical wording, and share one test helper
for the graph-wide self-reference invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(artifacts): recheck failed DMG detaches before reporting cleanup failure
NativeDmgArtifactReader.close() detached each device once and, when a
detach failed, asked `hdiutil info` once whether the device was still
attached. On APFS images, detaching the synthesized container ejects the
image disk too. `hdiutil info` can still list that ejected device
briefly, and a just-read volume can report busy. Either way a real
cleanup succeeded but close() reported "DMG detach or mount-root cleanup
failed" and kept the mount root.
macOS CI hit this intermittently in verify:macos-bundle: `hdiutil
detach /dev/disk23` failed with "No such file or directory" (already
ejected) and the device was still counted as attached. The #1103
review also raised the missing recheck.
After the first pass, recheck the remaining devices up to three times
with 250/500/1000 ms settle delays. Drop any that hdiutil no longer
lists, retry the detach of any still listed, and fail only for devices
that stay attached. The host seam gains an optional delay so tests run
without real waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): share DMG detach fixtures to stay under the duplication gate
The new busy-device and recheck cases copied the fake hdiutil host and
the APFS close sequence from neighbouring tests, which pushed jscpd to
its 2.5% threshold in Static checks. Share one single-device host
between the busy and retained-attachment cases and one APFS close
helper between the ejected-device cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`rea analyze PATH` routes a JavaScript directory or ASAR to the same
static analysis as `rea analyze-javascript-application`, but it passed
no signal and was not wrapped in withCommandCancellation. On SIGINT the
process was killed with no output (signal SIGINT, empty stdout).
The dedicated command returns a typed `cancelled` result and exits 130.
The #1098 review raised this route.
Decide the route first. A JavaScript target now runs exactly like the
dedicated command: cancellation wraps logging, so the cancelled exit
code is not replaced by the logged failure status. The binary route is
unchanged and keeps its own SIGINT handling in runDirectAnalysis.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds README_fr.md, translated from the current English README with the
same commands, links, heading structure and FAQ entries. Links Français
from every README language selector and registers it in the README
consistency matrix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recognize exit code 134 without a signal when the HAR decoder reports
V8 heap exhaustion. Preserve the observed termination in the memory
failure and cover Windows, POSIX, and unrelated decoder failures.
Commit 5ac3dc96 re-added application workflow scenarios under tests/acceptance/applications that are already covered under tests/boundary (mcp, filesystem, process) via the shared tests/fixtures/applicationMcpHarness.js fixture, per the boundary classification in 0e0b386d. The duplicates added no new coverage and pushed the jscpd duplication gate over its 2.5% threshold, failing CI static checks.
Parses rea mcp doctor arguments against one zod option schema that is also the help renderer's source of truth, answering --help/-h in any position without starting a diagnostic session and keeping actionable errors for unknown options and invalid formats. Updates the landed help assertion to the schema-rendered format list and adds boundary coverage for help positioning and --format edge cases.
Adds an owned in-memory MCP harness plus acceptance coverage for trace/compare/export-shape workflows over inline and recorded Evidence, including rejection of mismatched evidence references and spoofed providers. All 16 scenarios pass on the current base.
Integrate the numeric precision correction from #1135 with complete supplemental
metadata handling. Keep decoded numbers with an explicit limitation for mixed XML
content or unclassified integer text, rather than assigning another literal's
exact decimal. Project nonnumeric UID and CF$UID dictionary values recursively
while preserving numeric references, graph identity and original byte digests.
Add filesystem, built CLI and MCP regressions for the review findings, adjacent
XML representations and numeric reference controls. Retain the original native
Foundation qualification fixtures and verifier.
Verification: 84 focused tests; npm run check; npm run docs:check;
npm run verify:test-discovery; npm run verify:keyed-archive (real Foundation,
CLI and stdio MCP). No real Hopper or Ghidra verification was needed or run.
Co-authored-by: Rudy Mizrahi Celekli <47457359+rudycelekli@users.noreply.github.com>
Signed-off-by: morluto <76467478+morluto@users.noreply.github.com>
* fix(javascript): omit self-referential import edges with disclosure
A specifier that resolves back to the importing module itself produced an
imports edge from a module to itself, which the application graph schema
forbids; one such specifier failed result validation and lost the whole
analysis. Skip those edges at composition time and disclose the omission
count in the graph limitations.
Fixes#1129
* test(javascript): verify self-import behavior through the compiled CLI
---------
Co-authored-by: BaaRai <baarai@users.noreply.github.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
* test(browser): pin DOM and source-map URL policy classifications
Cover the unsupported DOM scope, credentialed destinations, and the source-map fetcher's pre-request filtering of credentials, other origins and non-http(s) URLs, so a later vocabulary unification can show exactly what changes.
Refs #829
* test(browser): assert exact sanitized credentialed DOM URL
---------
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
* fix(hopper): enforce caller-supplied request deadlines
* fix(hopper): correct idle deadline state and name timeout bound
Zero-ms deadlines never enter the FIFO, so report providerState
not_started instead of busy; the busy wording tells callers to wait
for an active request that does not exist. Name the Node timer
ceiling once and reuse it in validation and the error message.
* fix(hopper): enforce elapsed deadlines before dispatch and replies
* fix(hopper): distinguish unsent requests in timeout diagnostics
* test(hopper): exercise request deadlines against native Hopper
---------
Co-authored-by: Vilmer Frost <frost.vilmer@gmail.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
* fix(hopper): preserve owned basic-block endpoint instructions
* test(hopper): share probe runner and restore fixture hashability
Reuse one probe helper with the facade test's execFile options
(encoding, timeout, maxBuffer) instead of repeating the invocation.
Give the fixture Block a hash consistent with its equality so the
equality-based ownership doubles stay hashable.
* fix(hopper): align owned instruction walks with normalized block ranges
---------
Co-authored-by: Vilmer Frost <frost.vilmer@gmail.com>
Co-authored-by: morluto <76467478+morluto@users.noreply.github.com>
Adds README_fa.md (Persian/Farsi) contributed via PR #1140, keeps onboarding commands, links, and structure aligned with English, links فارسی from every translated selector, and registers fa in the readme consistency matrix.
Co-authored-by: Arad Ashkan <65897590+AradAshkan@users.noreply.github.com>
Kaoru0822
Ysopwnable
Andrew Barnes
morluto
Chris Ozsvath
BaaRai
Hasan Mehdi Rizvi
vilmerfrost