- A visibility variable could hide an object but never show it again: dataset
application, capture and binding refused any object that wasn't visible
(`is_editable`), so a row that hid an object left it hidden for good and a
capture after hiding it in the Layers panel didn't record it. They now use
`Document::variable_target`, which ignores the object's own visibility
(locked art and art on hidden or locked layers are still skipped).
- Renaming a variable renamed the active dataset when the two shared a name,
leaving it pointing at a dataset that doesn't exist.
- `variable.delete` and `dataset.delete` without `names` act on the
highlighted variable and the active dataset, so Window > Variables > Delete
Variable / Delete Data Set no longer fail with "missing `names`".
- `ids` is checked like other commands' explicit targets (a non-list no longer
falls back to the selection, bad ids are errors), names are trimmed and
capped at 255 characters, and the bind checks are shared by Bind and Make
Dynamic.
- Make Dynamic's fallback name no longer becomes " 2" for unnamed art.
- `dataset.list` reads the art once for every row's drift check, and
`Variables::prune` looks names up in a set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine side was called a solid base, but the panel could only list and
apply: variables and datasets were made through commands, which most people
won't find. The reference app's Variables workflow is now what the panel does,
and every button runs a `variable.*` / `dataset.*` command, so the panel and an
agent drive the document the same way.
New commands (all also in Window › Variables, the palette and over MCP):
- `variable.makeTextDynamic` / `variable.makeVisibilityDynamic`: define a
variable of that kind over the selection, named after what it drives, and
bind it — one step, as the panel's two buttons.
- `dataset.capture`: record what the bound objects hold right now as a new row
("Data Set 1"… ) and make it active. This, rather than typing values, is how
rows are made: change the art, then capture.
- `dataset.update`: write what the art holds now into the active row. Without
an active row it says so rather than picking one.
- `variable.rename` / `dataset.rename` (Variable Options…, Rename Data Set…):
a name is how a variable is referred to, so renaming carries its bindings and
its values in every row with it.
- `dataset.list` reports `matches` per row: whether the art still holds what
that row says.
`Document::captured_values` is the one place that reads a bound object's value,
so capture, update and the drift check can't disagree about what the art says.
Panel: the current data set across the top as a dropdown with ◀ ▶; variable
rows with their kind's icon and the name of the object they drive ("Multiple
objects" when it is more than one), a click selecting it and a double click
opening Variable Options; a dataset row in italics once an edit has moved the
art away from what it says; Make Text/Visibility Dynamic, New, Unbind and Delete
below, Capture and Update on a second line; and a (≡) menu with the same
commands for the ones that act on a row rather than the selection.
Checked on Rust 1.99 (the current stable), which is what the review asked for:
cargo xtask ci, all 7 steps pass.
`bindings` mapped an object id to a single variable name, so binding an object
to a second variable silently dropped the first — a binding lost with nothing
to show for it. The reference app binds the selected object to the selected
variable, one click at a time, and nowhere says a second binding replaces the
first (https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/
automate-actions/work-with-variables.html), so this allows several instead.
`bindings` is now a set of variable names per object. `dataset.select` walks
them in the order the variables are defined, which keeps two text variables on
one object deterministic (the later one's value is what is left, and `applied`
counts both). `variable.bind` reports `bound` (added) and `already` (was there
already); `variable.unbind` takes an optional `variable` to drop one binding
instead of all of them.
This is done before the field ships rather than after: `variables` has never
been in a released file, so the shape can still change for free. Once a version
with it is out, the same change would need a format version bump and a
migration, since `crates/format` keeps every version from 1 loading.
A strict superset of what worked before: every binding a document had is still
there and still applied, in the same order.
cargo xtask ci: all 7 steps pass.
Review of #761 turned up three real defects and a feature that was visible
but not usable. All of it is fixed here, each defect with a regression test
that fails without the fix.
- A binding outlived the object it named. Deleting art left its entry in
`variables.bindings` forever: it counted as a skip in every dataset
application, `variable.list` counted it, and the saved file grew with every
delete. `Document::prune_variable_bindings` now lets them go after each
edit, as `prune_assets` does for Asset Export's.
- `Variables::prune` cleared `active_dataset` by comparing it against the
*variable* names being deleted. A dataset named like a variable lost its
active state when the variable went. The two are separate namespaces; the
block is gone (dataset.delete already did it right).
- `variable.delete` reported the number of names asked for, not the number
deleted, so deleting a name that was not there still said `deleted: 1`.
- `dataset.set` (new): a dataset's values could only be set when it was
created, so changing one meant deleting and rebuilding the row — losing its
place in the list and the active one. This replaces the row's values and
reports what it dropped.
- Window › Variables, and dialogs for the "…" commands. Every command had an
empty menu path and the command palette runs those with `{}`, so nothing
could be defined from the UI at all. The commands now carry their menu
path, the "…" ones open a Variables dialog (a name and a kind; a name and a
field per variable, its kind's editor), and `dataset.set` opens with the
row's own values.
- Locked art is neither bound nor rewritten by a dataset, and says so.
- `set_plain_text` told a node that existed but was not type that it was
missing.
- The panel had Document Info's icon, so the two were indistinguishable in
the collapsed column; it gets its own, plus New/Delete buttons, and its
rows say what their count is.
Format round trips now cover variables (the testkit fixture defines both
kinds, binds them and applies a row), and ROADMAP/README no longer list the
feature as missing.
cargo xtask ci: all 7 steps pass.
Each axis now takes its own tick marks, and the value axes a prefix and
suffix for their numbers:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/change-graph-value-axes.html
- Value axes (the left one, or a bar graph's bottom one, and the right
one): tick marks of no, short or full length, and a count per
division; labels stay at the divisions.
- Category axis: the same, at the labels or, with Draw Tick Marks
Between Labels, between them (halfway between labels when they sit
at the plot's edges).
- Add Labels: prefix and suffix per value axis ($, %).
- The Graph Type dialog offers the lengths and value axis sides as
choices, and counts it sends back as floats are read.
Own choices, as the page doesn't say: the lengths are none, short (the
4 pt ticks as before) and full (across the plot); category axes start
with no tick marks, as they had none before. Counts are capped at 20
per division and 10,000 category tick marks, affixes at one line of 64
characters. A full-length tick on the zero line or an axis line is left
out.
The legend moves past a bar graph's last value label when a suffix
runs it into the legend's gap. New fields are written only when set;
graphs with the default options draw the same art as before.
The value axis can now go on the left side (as before), the right side
or both sides of column, stacked column, line, area and scatter graphs:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/change-graph-value-axes.html
With the axis on both sides, Separate Scales gives the series assigned
to the right axis a scale of their own there, with its own tick values
(rightTicks, rightAxisMin, rightAxisMax):
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/assign-different-scales-to-value-axes.html
- A series goes on an axis with Group Selection (or `seriesIndexes`)
and `valueAxis` left or right. Without separate scales both sides
show the one scale.
- Each axis stacks its own stacked columns and areas; stacked columns
of the two axes take a slot of the cluster each instead of covering
each other.
- An axis with no series of its own shows the other one's scale. The
right scale's zero gets a line of its own when it isn't the left's.
- The right axis' labels push the legend further right.
- With series on both axes picked, the Graph Type query returns no
value axis, so the dialog's OK leaves each series where it is.
- Graph Data drops right-axis assignments for series the new data no
longer has.
Own choices, as the pages don't say: bar graphs keep their value axis
along the bottom, and scatter graphs draw every series on one scale.
New fields (valueAxis, separateScales, rightSeries, rightTicks,
rightAxisMin, rightAxisMax) are written only when set, so other files
are unchanged and older versions draw the left axis as before. Graphs
with the axis on the left draw the same art as before.
Graph Type on series picked with Group Selection (or listed in the new
`seriesIndexes` param) now sets the type of those series only, so a
column graph can carry a line series:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/combine-different-graph-types.html
- Column, stacked column, line and area mix on the vertical value axis;
bar and stacked bar on the horizontal one. Scatter, pie and radar take
no other type. The help page doesn't list which types mix, so this is
our own choice: types that share the value axis.
- Stacked columns take one slot of the column cluster (a graph of
stacked columns only is unchanged); stacked series stack with each
other, areas with each other, and the value axis covers both totals.
- Areas draw at the back, lines in front of columns. Category labels,
areas and lines sit at the category centres once a series that isn't
edge to edge is in the graph.
- With only series selected, the Graph Type query returns their type,
so the dialog's OK keeps it, and they stay selected after the change.
An explicit `id`, or anything else in the selection, is the whole
graph, as before.
- A series given the graph's own type follows the graph again. A type
the graph's type can't take is drawn as the graph's and kept.
Series types are stored in a new `seriesKinds` field, written only when
a series has its own type; versions that don't know it draw the whole
graph as the graph's type. Graphs of one type draw the same art as
before.
A graph's data can now hold blank cells: an empty CSV cell, a null in
`rows` (any cell that isn't a finite number), the rest of a short row,
or a row that has only a label.
- Columns, bars and stacked segments leave a blank cell out instead of
drawing a zero-height mark.
- Line and scatter graphs break their lines around it and draw no
marker there; the value axis ignores it.
- Area, pie and radar graphs draw it as 0, which is what it adds to
them.
The help pages don't describe blank cells, so this is our own choice:
a cell with no value has nothing to draw, which also matches how a
series with a missing year reads in a report.
In the file a blank cell keeps a 0 in `rows` and is listed in a new
`blanks` field ([category, series] pairs, written only when there are
any). A version that doesn't know blanks ignores the field and reads
the zeros, so files still open there, and files without blanks are
unchanged.
A number in straight quotes is a label, as the help page on graph
labels says (a year as a category name, for one). The CSV reader used
to strip the quotes first and read it as a value. Label columns are now
decided for the whole column: once any row starts with a label, every
row's first cell is its label, so a row with an empty label no longer
shifts its values one place left. The data window writes a header row,
labels that are empty, read as numbers or have spaces around them in
quotes, and blanks as empty cells, so they come back as they were.
graph.setData {} returns blanks in `rows` as null, so the rows it
returns can be edited and sent back. A label-only row keeps its place
with blank values; a row with neither a value nor a label is dropped,
and a first row that is a label followed by empty cells (`Year,,`) is
still read as a header with no series names.
The data grid is built in full for drawing and for the data window, so
it now stops at 10,000 categories of 256 series, which keeps a file
with one very long row from allocating without bound.
Behaviour (quoted labels): Add graph labels and data sets:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-labels-and-data-sets.html
New line graphs put their points at the centres of their categories, the
option's default in the reference app; graphs saved before the option
existed were drawn edge to edge and keep it (a field default of its own).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Line graphs take the Edge-to-Edge Lines option (`edgeToEdge` on
graph.setType). On, the lines run across the whole plot, which is how
they always drew and stays the default, so existing graphs and files
look the same. Off, the points sit at the centres of their categories,
like the columns of a column graph, so a line graph lines up with a
column graph of the same size. The page describes only what the option
does when on; the off position is its opposite.
Radar graphs drew their ring and markers whatever Mark Data Points and
Connect Data Points said. They now follow both, like line and scatter
graphs.
Behaviour: Format columns, bars, and lines, Graph Type options for
line, scatter and radar graphs (Mark Data Points, Edge-to-Edge Lines,
Connect Data Points):
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-columns-bars-and-lines.html
Group Selection's fill and stroke on a graph series are kept on the graph,
separately per series, and reapplied when its data, type or size changes,
and through save, open and undo.
A selected live polygon now shows Illustrator's Polygon Properties in the
Transform panel and the Properties panel's Transform section: side count,
angle, corner type and radius, radius, side length and Make Sides Equal
(enabled once an uneven scale has made its sides differ). Before, only the
side count and corner radius were there.
object.setLiveShape takes polygonAngle (degrees counterclockwise),
polygonRadius and sideLength (points, centre to vertex / side) and
makeSidesEqual, which drops the uneven scale and shear and keeps the
polygon's centre, angle and mean radius. Each call is one undo step; a
radius or length that isn't a number above 0 is an error. A star stays a
plain path, as in Illustrator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking an object's target circle in the Layers panel always replaced
the selection, so several objects couldn't be picked there. Shift-click
now adds the object (a layer: its art) to the selection, or takes it out
when it is selected already, as in Illustrator; nothing stays targeted
then. layer.target takes add: true for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a brush in the Brushes panel (or the panel menu's Brush
Options…) opens its options. Calligraphic Brush Options: Angle,
Roundness and Size, each Fixed, Random or Pressure with its Variation,
over live previews of the nib and of a stroke. Bristle Brush Options:
Shape and the bristle sliders. OK runs brush.options; strokes painted
with the brush update.
The Paintbrush records the pen pressure along a stroke (path.freehand
takes [x, y, pressure] points), and a Calligraphic brush with Pressure
variation changes its nib along the stroke, from the value less the
variation at the lightest pressure to the value plus it at the heaviest.
Brushes saved before keep their Random variation. Pen pressure doesn't
reach the app on macOS yet (winit 0.30 reports none there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The art that goes with an artboard (Duplicate Artboard and Copy/Cut with
art, the Artboard tool's Move/Copy Artwork with Artboard, and moving an
artboard by its X and Y) was found with a half-open containment test, so
an object whose right or bottom edge lay exactly on the artboard's was
left behind. Its edges now count as inside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a group or layer was isolated, clicks, hovers and drags still
reached the art outside it, and that art drew as usual. Now only the
isolated container's contents hit: the art around it is locked and
clicks pass through it. On the canvas it draws at half opacity, above
the group as well as below, each run of it as one dimmed layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The report kept a placed document's LINKED FILES and FONTS inside its parent's list. Each document
now gets its own sections, the packaged one first and unchanged (no Document: line), then each
placed document's, headed by its file. Drops a debug_assert and an unneeded mut, runs rustfmt, and
documents the nested packaging in docs/mcp.md and the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
package.rs: the collector takes main's font lookup (fonts found by any of their names, in the
version the type names, a missing style shown in its closest one, files named by packaged_name).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An ellipse kept pie angles in its model, but nothing drew or set them. Now
the Transform and Properties panels show Ellipse Properties with Pie Start
Angle, Pie End Angle and Invert Pie, as in Illustrator, and
object.setLiveShape takes {pieStart, pieEnd, invertPie}. The pie runs
counterclockwise on screen from the start angle (0 at 3 o'clock) to the
end angle and closes through the centre; 0 to 360 is the whole ellipse,
an end of 0 means 360, and Invert Pie swaps the angles to show the other
part. One undo step each; a bad angle is an error. The labels are
translated in every complete language. The on-canvas pie widget is still
to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font library can hold two versions of one family and style (a new
Montserrat-Bold.ttf beside an old montserrat.ttf). The font database kept
only the first one loaded, so type set in the other couldn't be matched
when a PDF or .ai was opened: it came in as outlines. Now every version
loads (the first stays the one family and style resolve to), PDF import
tries the other versions when the glyphs differ, and type set in a version
the family and style alone wouldn't pick names it in CharStyle::font_version
(left out when None, so documents without it are unchanged). Layout,
shaping, the substituted-glyph highlight, Find Font, Package and Document
Info follow it; changing the font clears it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Libraries panel was a placeholder: it invited dragging art onto it,
but nothing happened. It now keeps local libraries (no account, no
cloud), as Illustrator's Libraries panel does:
- drag art off the canvas (or a swatch) onto the panel to add it, or use
+ to add the selection's graphic, fill or stroke colour, character
style or paragraph style;
- drag a graphic onto the canvas (or double-click it) to place a copy,
click a colour to paint the selection through the active Fill/Stroke
proxy, click a style to apply it to the selected type;
- the library picker and the panel menu create, rename and delete
libraries; each is a .vclibrary file in a Libraries folder next to the
preferences (session-only in the web app, headless sessions and runs
without preferences).
Engine: library.list/get/setCurrent/create/rename/delete/add/use/
removeItem. A graphic is stored as a native document with a thumbnail:
adding copies as Copy does and placing pastes as Paste does, resources
and swatch-name conflicts included. Using a style adds it to the
document and applies it in one undo step.
Clipboard::to_document gave its layer the id u64::MAX, which made a
saved copy overflow Document::fix_next_id when read back; the layer now
takes an id above the objects', and fix_next_id saturates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`artboard.setProps {scaleArt: true}` maps the art fully inside a resized
artboard (as Move Artwork with Artboard gathers it) and its artboard guides
from the old rectangle onto the new one, each side by its own ratio, in one
undo step, and returns the ids scaled. Strokes, effects and corners follow
Scale Strokes & Effects and Scale Corners (`strokes`, `corners`), pattern tiles
Transform Pattern Tiles (`patterns`); locked and hidden art follows
`lockedAndHidden` (default: prefs moveLockedWithArtboard). The resolved choices
are journaled, so a replay scales the same objects the same way. A move that
keeps the size scales nothing.
The Artboard tool's `scaleArt` option (saved with `moveArt`) makes handle
drags proportional, as the public help describes, keeps them proportional at
the 1 pt minimum, and leaves the scaled art out of the Smart Guide targets.
Move and Scale Artwork with Artboard are check boxes in the Control bar and
Properties' Edit Artboards; the artboard size fields there and in the
Transform panel pass the option. Translated in the eight catalogs that have
Move Artwork with Artboard. docs/mcp.md and the ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The layers reader of the editing copy (operators translated into
PostScript for the interpreter, any file with RGB colours, gradients,
transparency or images falling back to its page) is replaced by a reader
of the whole structure (import/ai): layers and sublayers with their
options, groups, compound paths, clipping groups and layer clipping,
names, hidden and locked objects, RGB, CMYK, grey, named and spot
colours, gradients, transparency, fill rule, overprint, embedded images
with their alpha channel, guides and every artboard, and objects drawn
as their look when they have several fills or strokes, effects or a
brush. Containers: Zstandard, zlib or plain data in EPS and .ai.
The text placement, the comparison with the page and the overwrite guard
stay around it. The page's type takes its text object's place without a
group; the comparison is by lightness, on nothing, without layers that
don't print. Symbols, pattern fills, placed files and unknown operators
make the file come in as its page where they show, and are left out of
layers that don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paragraph panel › Kinsoku Set (with the East Asian options) and `text.setFormat {kinsoku}`, as
decided in #633:
- Hard: today's set, so existing documents don't change; the default, and not saved.
- Soft: as Hard, except that 々, the prolonged sound mark ー (JLREQ cl-10) and small kana (cl-11)
may start a line: JLREQ's level 3 line-breaking rules (Appendix C.3). Half-width forms aren't in
those classes and stay off the line start.
- None: no kinsoku.
The setting reaches every break the composers consider (greedy, every-line and hyphenation
points). Reset Panel returns to Hard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An Illustrator EPS is a flattened page plus, after %%EOF, an editing copy of
the document; a PDF-compatible .ai carries the same in its private data.
Importing only the page lost layer names, order, visibility, hidden layers
and hidden objects and hidden text.
- eps: read the editing copy (Zstandard %AI24_DataStream, older zlib
%AI9_DataStream) into layers, sublayers, groups, compound paths, clip
groups and hidden objects, run by the existing PostScript interpreter.
Falls back to the page, with a warning, when a shown layer uses an
operator that isn't read or the art differs from the page by over 5%.
- eps: read the text document (ate.rs) to place type on hidden layers and
objects; the page's type is matched to the file's text objects by
position (pieces of a line included) and kept with the nearest one when
none claims it. Area type and type on a path are left out with a note.
- pdf/engine: .ai files go through the same reader.
- engine/cli: a file whose import left things out isn't overwritten unless
asked (acknowledgeLoss, --replace-lossy).
- eps: font names re-encoded with a *<n> suffix resolve to their family.
- i18n: es/it/ru for the new import messages; ROADMAP updated.
Container and text-document formats were inferred from user-owned files; the
Adobe file format specification was not read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The image decoder can't read a CMYK TIFF with an alpha channel at all
("color type Unknown(0)"); it is now read with the tiff crate, associated
alpha divided back out and the inks converted in the active colour settings.
And a 60 in sheet at 300 ppi (18000 x 6600 px) hit the decoder's 512 MB
default allocation limit; up to 2 GB is now allowed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The Image Trace panel's Advanced options sit under a full-width collapsible
header (widgets::section_toggle, also used by New Document's Advanced
Options); whether it is open is kept with the UI preferences.
- View: Tracing Result, Tracing Result with Outlines, Outlines, Outlines with
Source Image and Source Image, in the panel, the Control bar and the
Properties panel. The view is saved in the Image Trace object's settings
(`trace.view`), kept when it is traced again, set with the new
`imageTrace.setView` command (or `view` on imageTrace.make) and drawn by the
canvas only (RenderOptions::trace_views): exports, printing and Expand keep
the tracing result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel laid out a row (with its thumbnail and several whole-document
lookups) for every open row each frame. A layer of 5,000 groups of 10 paths,
all open, took about 29 s a frame headless. Now the rows shown are listed once
per document change (with their layer colour and dimming worked out on the
way down) and ScrollArea::show_rows lays out only those in view: 0.4 ms a
frame. A row highlighted out of view is scrolled to.
The open rows move from UI state into the document's state
(DocState::layers_open, OpenRows): a document opens with only its top-level
layers open, and native files save the open rows (Document::layers_open,
written only when not the default, at save time like the view, so opening or
closing rows never marks the document modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Character panel menu › Character Alignment gains ICF Top/Right and ICF Bottom/Left, and
`charAlign` takes `icfTop` / `icfBottom`: a character smaller than the largest on its line lines
up its ideographic character face's top (right, vertical) or bottom (left) with the big one's.
`FontFace::icf_margins` places the ICF inside the em box as the OpenType baseline tags define it
(https://learn.microsoft.com/en-us/typography/opentype/spec/baselinetags): `icfb` / `icft` of the
BASE table's horizontal and vertical axes against `ideo` / `idtp` (else the OS/2 typographic
descender and one em), for Han ideographs (else kana, else the first script). Without them, as that
page allows, the average ink box of some ideographs and kana; a face without ideographs uses its
em box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
Each paragraph has its own alignment, indents, spacing, hyphenation, tab
stops and paragraph style (TextObject.paras; para stays paragraph 0's, so
old files and readers work). Layout, editing (split/merge), threads, the
Paragraph/Tabs/Paragraph Styles panels, ranged text.setStyle/setFormat/
tabs/paraStyle.apply, SVG export/import and the fuzzers follow.
Area Type Options gain a fit: none, autoHeight (Illustrator's Auto Size:
the frame's height follows the text after every edit, resolved in
refresh_bounds inside the edit so it shares the edit's undo step) and
shrinkText {minPercent} (beyond Illustrator: overflowing text scales its
sizes, leading and baseline shifts down at layout time by the largest
factor, in 0.1 pt steps of the first run, that fits). The Auto Size New
Area Type preference now applies. text.areaOptions and document.inspect
report overflow and the shrink factor; the Area Type Options dialog
offers fit and first baseline as dropdowns.
Area Type Options > Align: Top / Center / Bottom / Justify (AreaOptions.verticalAlign,
LayoutOptions.vertical_align). Each row/column cell is aligned on its own; rectangular
cells shift their lines, other frames and text wrap reflow until settled without
losing text. Justify shares the leftover space equally between line gaps. Area Type Options
shows Align and First Baseline as dropdowns (the parameter dialog's choices table).
Illustrator's Every-line Composer balances the breaks of the whole
paragraph for left/centre/right aligned text too, not only justified
text. VectorCraft only composed justified area text; ragged text was
always broken greedily.
- Model: ParaStyle.composer (vectorcraft_doc::Composer, re-exported by
vectorcraft-text), Every-line by default like Illustrator, saved only
when Single-line. layout() reads it from the object;
LayoutOptions.composer is now an Option override for tests.
- Composer: the justified gate is gone. Ragged lines never shrink (a
line that doesn't fit ends the node), badness is 100*r^3 with r = the
line's leftover space over a rag zone of 1/6 of the width (finite for
lines without spaces); the last line is free unless shorter than 1/3
of the width (measured in zones of 1/3), so a lone short word on the
last line pulls a word down. Hyphens cost 25 in ragged text (50 in
justified). Knuth-Plass fitness classes with adjacency demerits
(justified 10000, ragged 1000). Lines past the last width change
share one node key, active nodes are capped (4096) and paragraphs
over 200k glyphs break single-line, so work stays bounded; ragged
tries a tolerance of one rag zone, then any fitting breaks, then
falls back to greedy.
- text.setFormat {composer: "singleLine"|"everyLine"}; the Paragraph
panel menu's composer items work with a check mark (Reset Panel goes
back to Every-line).
- Tests: ragged Every-line moves "or" down in "Destroy all creatures
with toughness X or less." where greedy leaves "less." alone; the rag
of long paragraphs is no worse than greedy (sum of squared leftover
and of neighbour differences); Single-line is greedy; the 10k-char
layout budget covers ragged text; command test with undo; native
format round trip (rich_session's text is now Single-line).
No existing test needed changing: the justified tests and
hyphenated_layout_adds_hyphens (ragged, now Every-line) still pass.
Auto alignment (start of the paragraph direction) is ragged; a wrapped
line's Mojikumi flush opening bracket gives its half em back to the
composer, as in the line loop; tests cover Auto in both directions.
Layout of 10k chars, release: justified Every-line 5.6 ms, ragged
Every-line 5.8 ms, ragged Single-line 4.8 ms.
An SVG used as an animation rig lost its hidden alternates and their
rotation pivots: the exporter left hidden objects out (only hidden layers
could be kept), and the importer dropped data-* attributes.
- SVG export: hiddenLayers (on by default for document.save, as before)
now keeps hidden objects too, each written display="none" on its own
element (path, image, text or group). Exports still leave them out
unless asked; the CLI's convert asks, as a conversion keeps the
document.
- An object's own data: ObjectAttributes.data, the data-* attributes in
order (ours, data-name and data-vc-*, aside). The importer keeps them on
the objects and layers they belong to (at most 64 per element), the
exporter writes them back, the native format saves them (missing in
older files), and object.setProps {data: {key: value|null}} sets or
removes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Corner widgets only ever showed on live rectangles: CornerWidgets::of bailed
out unless the selection's live shape was LiveShape::Rectangle, and
object.setLiveShape only edited rectangle radii. A star is a plain path, so it
had no widgets with either selection tool.
- geom::corners: the corners of any path (anchors without handles between two
straight sides) and the path with them cut round, inverted round or
chamfered, each corner a circle tangent to both sides, its radius no larger
than takes the cut halfway along its shorter side. Rectangles now cut their
corners with it (bit-identical anchors and layout).
- doc::corners::LiveCorners/set_corners: one model for a live rectangle's,
a live polygon's (new radii/kinds) and any other path's corners (new
LiveShape::Path keeping the uncut outline, plain again once nothing is cut);
radii scale with transforms (Scale Corners) and stay circular.
- object.setLiveShape takes anchor indices for `corners` on any path; polygons
keep a shared radius as their sides change.
- Widgets: Direct Selection on any path, Selection on live rectangles and
polygons; placed on each corner's bisector, the drag follows it, the red
limit outline marks corners at their own limit; the angle preference and
View > Hide Corner Widget apply. Corners dialog and the Properties and
Transform panels' Corner Radius (now on polygons too) work on them.
- Tests for the star, the polygon and a pen path in geom, doc, tools, engine
and ui-egui; docs and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Type is picked on the baseline of any of its lines (point type and area
type, besides area type's frame), as in Illustrator, not only the first
one: the layout's baselines are cached with its bounds
(`TextObject::cached_baselines`, from `TextLayout::baselines`), with the
first one across the bounds as the fallback. Vertical type's runs down
each column's centre line.
- Type in perspective is picked where it is drawn (through its projection).
- The bounds rule type out before its path is built, so hovering stays
free of allocations away from type.
- The Type tools still edit type clicked among its characters (they made
new type there with the preference on), and the Eyedropper still samples
it there, as it does inside fills with Object Selection by Path Only.
- Tests for all of it; docs/mcp.md and ROADMAP say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Preferences › Type › Type Object Selection by Path Only was stored and never read.
On, the Selection tools pick type on its type path only — point type's baseline
(the line the selection marks under it, across its layout's width), area type's
frame, type on a path's path — within the selection tolerance; a click among the
glyphs or inside the frame selects nothing. Off (the default), anywhere in the
type's bounds selects it, as before.
`HitOptions` gains `type_path_only`, set by the tools' context (`hit_options()`)
and the canvas's `hit_at` from the preference, so the Selection tools, Cmd-click
behind, object highlighting and the context menu agree. Tests at the hit-test
level (point, area and on-path type) and through the Selection tool with
`prefs.set`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
bflatastic
Fahri Meral
IHAGI-c
Vikram Bhaskaran
Juan Manuel Verges Solanas
shmuelbiller1
HT
imachus
Matthew Farrow
fastmikey99
haven
David Whiting
wstock