The Curvature tool only edited the path it was drawing. It now edits any
selected path, whatever drew it, keeping its shape except where edited:
a click on a point makes it the current (direct-selected) point and a
drag moves it, re-curving only its two segments (the neighbours keep
their handle directions); Alt-click or double-click toggles it smooth or
corner and Delete removes it; a click on a segment adds a smooth point
without changing the shape, and a drag moves it in the same undo step.
With an end of an open path current, clicks go on from it (the old
segments keep their shape) and a click on the other end closes it.
The edits go through a new path.curvatureEdit command (move, insert,
extend, close), path.convertAnchor and path.removeAnchor, one undo step
each. The tool now claims Delete/Backspace while it has a point to
remove, so the key no longer deletes the whole path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator EPS and .ai type is made whole from the file's text
document, shown or hidden: point type, area type (a story in several
frames as threaded type that flows when the file opens) and type on a
path, with its fonts, size, leading, tracking, scaling, baseline shift,
fill and stroke colours (grey, RGB or CMYK), alignment, indents and
paragraph spacing. The page's drawing of that type, often in pieces, is
left out; where the text document can't say, type that shows still
comes from the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When a document opens with fonts that aren't available, fonts used
only in its symbols included, VectorCraft lists them in a Missing
Fonts dialog after the missing linked file questions, one document at
a time, with Find Fonts and Close. Find Fonts opens Type › Find Font
on the first missing font of the layers' type, to replace it. After
Find Fonts or Close the dialog doesn't open again for that open; when
another dialog replaces it, it opens again once that dialog closes.
Search Fonts Folder (the Fonts folder File › Package writes next to
the document) and Find in Folder… search a folder and its subfolders
for the fonts' files, and Add Fonts copies the files the user chooses
into a Fonts folder next to the preferences. The desktop app and
vectorcraft-cli read that folder with the system's font folders. Type
› Find Font has a Find in Folder… button too when fonts the document
uses are missing. The web app shows no dialog; a status message says
how many fonts aren't available.
- text.missingFonts lists each missing family and style once,
whatever version the document's type names, and leaves out CSS
generic families such as sans-serif. text.findFontFiles searches a
folder on up to 8 threads and returns at once; text.findFontFiles {}
reports the search, and {stop: true} stops it. A search reads only
what the font scan reads of font files (their table directories and
name, fvar and OS/2 tables) and, on macOS, of suitcase fonts, and
lists a file for a font only when the file makes the font resolve
exactly. It does not enter app packages, the Program Files and
ProgramData folders, the system's folders at the root of a volume,
the Shared and Public folders in Users, a home folder's Library,
AppData, Applications, snap and dot folders, a Library folder's app
data folders or the folders the environment names for apps, and it
skips other hidden folders and does not follow links below the
picked folder. It ends after 60 s by default, after 10,000,000
entries listed, with more than 1,000,000 folders waiting, after
10,000 font files read or 1,000 kept, or once every font has a file;
Stop and Close end it too.
- text.addFontFiles copies only files the last search found. Of
those, it copies only regular .ttf, .otf, .ttc, .otc, .woff and
.woff2 files and suitcase fonts with their resource fork, at most
256 MB a file and 1 GB in all. It never replaces a file: a file with
the same contents is kept, and when another file has that name, the
copy gets a number (Name 2.otf). The fonts are then scanned again,
and type set in them redraws.
- ui.missingFontsDialog and ui.findFontsInFolder open the dialog for
agents; docs/control-protocol.md lists its fields.
- File › Package gives a font file whose name has no font extension
the extension that matches its data (.ttf, .otf or .ttc).
- vectorcraft-text adds set_app_font_dir, which system_font_dirs
reads, WantedFonts, which reads a font file's names as the font scan
does, is_font_file and is_suitcase. #762 split its face reader, which
now takes read budgets: file_face_names_within tries the suitcase
reader first, and reader_face_names_within applies the budgets to
each font. vectorcraft-format adds write_new_with.
Docs: docs/mcp.md, docs/control-protocol.md, ROADMAP.
- Fit to Artwork Bounds fits the art exports draw: hidden objects and
layers, guides and template layers don't count, and the bounds stop at
a layer's clip.
- The comparison with the page catches an object one draws that the
other doesn't (pixels whose neighbours all differ, away from type), a
light colour against white, and, for an EPS whose page is its art's
box, art the layers print outside it.
- textAs: outlines opens a .ai whose type shows from its PDF part, which
has the outlines.
- document.open takes editingData: false to open an Illustrator EPS or
.ai as its page or PDF part only, for print pipelines.
Part of #637.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Save Swatch Library dialog lists Swatch Exchange (.ase) as a
format, and swatch.library.save takes format: "ase" or a path ending
in .ase. Each solid color keeps its model (RGB, CMYK, Lab or Gray) and
its type (spot, global or process), and color groups stay groups.
Gradients and patterns are left out, and a tint swatch is written as
the color it shows. Without a path or user: true, the command returns
the file as dataBase64.
A swatch exchange library opens under the name of its file. When Save
Swatch Library or Save Graphic Style Library saves to a file, the save
panel suggests the Name from the dialog as the file name, as a save to
User Defined does, and the web app downloads the file under that name.
A name made only of dots and spaces, such as "...", gives the file name
Library (Library.vcswatches) in place of a hidden file.
palette_io::write returns the file's bytes. A property test writes
generated libraries and reads them back, and an import fuzz test loads
mutated copies of a file the writer wrote.
Clippy 1.99.0 added `chunks_exact_to_as_chunks`, which fails `cargo xtask ci`
at its clippy step. Eight uses of `chunks_exact(_mut)` with a constant size now
use `as_chunks(_mut)` (stable since 1.88, within the 1.95 minimum): four in
crates/affinity, three in crates/effects and crates/engine tests, and two in
xtask's sha256. docs/development.md says the gate targets the current stable.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
`artboard.setProps {scaleArt: true}` maps the art fully inside a resized
artboard (as Move Artwork with Artboard gathers it) and its artboard guides
from the old rectangle onto the new one, each side by its own ratio, in one
undo step, and returns the ids scaled. Strokes, effects and corners follow
Scale Strokes & Effects and Scale Corners (`strokes`, `corners`), pattern tiles
Transform Pattern Tiles (`patterns`); locked and hidden art follows
`lockedAndHidden` (default: prefs moveLockedWithArtboard). The resolved choices
are journaled, so a replay scales the same objects the same way. A move that
keeps the size scales nothing.
The Artboard tool's `scaleArt` option (saved with `moveArt`) makes handle
drags proportional, as the public help describes, keeps them proportional at
the 1 pt minimum, and leaves the scaled art out of the Smart Guide targets.
Move and Scale Artwork with Artboard are check boxes in the Control bar and
Properties' Edit Artboards; the artboard size fields there and in the
Transform panel pass the option. Translated in the eight catalogs that have
Move Artwork with Artboard. docs/mcp.md and the ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The layers reader of the editing copy (operators translated into
PostScript for the interpreter, any file with RGB colours, gradients,
transparency or images falling back to its page) is replaced by a reader
of the whole structure (import/ai): layers and sublayers with their
options, groups, compound paths, clipping groups and layer clipping,
names, hidden and locked objects, RGB, CMYK, grey, named and spot
colours, gradients, transparency, fill rule, overprint, embedded images
with their alpha channel, guides and every artboard, and objects drawn
as their look when they have several fills or strokes, effects or a
brush. Containers: Zstandard, zlib or plain data in EPS and .ai.
The text placement, the comparison with the page and the overwrite guard
stay around it. The page's type takes its text object's place without a
group; the comparison is by lightness, on nothing, without layers that
don't print. Symbols, pattern fills, placed files and unknown operators
make the file come in as its page where they show, and are left out of
layers that don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- a story is read once however many text objects name it; the text objects, their pairs with the
page's type, the pieces of a line and a story's size are capped, and over a cap the layers aren't used
- the ASCII85 of the text document is bounded before it is decoded
- joining the pieces of lines that interleave no longer removes the wrong pieces
- a run length too large for the text saturates instead of overflowing
- a dictionary left open at the end of a layer, and layers nested deeper than are read, make the
file one that comes in as its page (they were silently dropped)
- a file whose editing data can't be decoded says so, and the notes about art that was too much or
too far away count as losses, so writing over the source asks first
- the private data of a .ai is inflated under a cap of its own (the PDF reader's decoder has none)
- the other writers (PDF, selection, office, print) ask before replacing a source that lost things,
and a recovered copy remembers that
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
An Illustrator EPS is a flattened page plus, after %%EOF, an editing copy of
the document; a PDF-compatible .ai carries the same in its private data.
Importing only the page lost layer names, order, visibility, hidden layers
and hidden objects and hidden text.
- eps: read the editing copy (Zstandard %AI24_DataStream, older zlib
%AI9_DataStream) into layers, sublayers, groups, compound paths, clip
groups and hidden objects, run by the existing PostScript interpreter.
Falls back to the page, with a warning, when a shown layer uses an
operator that isn't read or the art differs from the page by over 5%.
- eps: read the text document (ate.rs) to place type on hidden layers and
objects; the page's type is matched to the file's text objects by
position (pieces of a line included) and kept with the nearest one when
none claims it. Area type and type on a path are left out with a note.
- pdf/engine: .ai files go through the same reader.
- engine/cli: a file whose import left things out isn't overwritten unless
asked (acknowledgeLoss, --replace-lossy).
- eps: font names re-encoded with a *<n> suffix resolve to their family.
- i18n: es/it/ru for the new import messages; ROADMAP updated.
Container and text-document formats were inferred from user-owned files; the
Adobe file format specification was not read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Effect › Blur › Radial Blur (spin/zoom, draft/good/best) and Smart Blur
(Normal mode), Effect › Sharpen › Unsharp Mask: Photoshop-style filters in
vectorcraft_effects::pixel, run by the renderer on the object's pixels in
stack order with Gaussian Blur and Feather, cached while panning; lengths in
points, bounded work per pixel. PDF, Expand Appearance and SVG export write
the effected objects as images. Dialogs with preview (method/quality
dropdowns, fields in documented order), menu entries, translations, tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- artboard.rearrange takes layout (gridByRow, gridByColumn, row, column;
byColumn stays as an alias of gridByColumn) and order (leftToRight,
rightToLeft); Columns is the row count of a grid by column and is
ignored by row and column. It returns {artboards, rows, columns}.
- A Rearrange All Artboards dialog: Layout and Layout Order toggles drawn
in code (widgets::layout_button, previewing the order), Columns/Rows,
Spacing, Move Artwork with Artboard and the artboard count.
- One click: Rearrange All in the Properties panel (Document section with
several artboards, Edit Artboards' Quick Actions); the Artboards panel's
Rearrange button and menu item now open the dialog too.
- Tests for every layout x order (artboards, art riding along, one undo
step), the dialog, the Properties button; the command sweep covers the
new params. Translations for ja, es, it, ru, fr, zh-hans, zh-hant and
pt-br; ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts: README and ROADMAP (both sides kept: the French and Russian
interface with the Affinity sentence; the placed-documents bullet with
the Affinity one); place and swatch libraries (upstream's byte sniffing
and comments, with the preview-only refusal kept).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GQPh8UDgMyARR5Hat9UchC
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
File › Open, Other Library… and the User Defined library folder read
.ase files. Colors keep their model, global and spot colors stay global
and spot, and color groups stay groups. The library readers take a
file's bytes. On the web, File › Open passes a swatch library file to
swatch.library.load as dataBase64 instead of as lossy UTF-8 text.
Swatch and group names in a library are now unique, in .gpl files too.
Add to Swatches puts each color group of a library into one document
group when the document already has a swatch with the group's name.
The library fuzz helpers fail when a command panics.
Each paragraph has its own alignment, indents, spacing, hyphenation, tab
stops and paragraph style (TextObject.paras; para stays paragraph 0's, so
old files and readers work). Layout, editing (split/merge), threads, the
Paragraph/Tabs/Paragraph Styles panels, ranged text.setStyle/setFormat/
tabs/paraStyle.apply, SVG export/import and the fuzzers follow.
Area Type Options gain a fit: none, autoHeight (Illustrator's Auto Size:
the frame's height follows the text after every edit, resolved in
refresh_bounds inside the edit so it shares the edit's undo step) and
shrinkText {minPercent} (beyond Illustrator: overflowing text scales its
sizes, leading and baseline shifts down at layout time by the largest
factor, in 0.1 pt steps of the first run, that fits). The Auto Size New
Area Type preference now applies. text.areaOptions and document.inspect
report overflow and the shrink factor; the Area Type Options dialog
offers fit and first baseline as dropdowns.
Open and Place read Affinity documents natively (.af from Affinity 3,
.afdesign/.afphoto/.afpub from Affinity 1 and 2): layers and sublayers,
groups, artboards with their names and backgrounds, Publisher pages side
by side, curves with live corners, parametric shapes, compound shapes,
clipping by nesting, vector and pixel masks, solid and gradient fills,
strokes, fill layers, artistic and frame text, placed images (their
original JPEG/PNG), pixel layers, embedded documents as their cached
picture, opacity, visibility, locking and blend modes, at the document's
resolution in points. Unsupported content (effects, adjustments, brushes,
master pages, special shapes, Affinity-only blend modes...) is listed in
the import warning, one line per kind. A file whose native data can't be
read opens as its embedded preview with the reason, and that preview
cannot be placed or used as a template or library. Save never writes back
over the Affinity file and there is no Affinity export.
The document semantics were fitted to the thumbnails Affinity embeds in
176 public documents. `cargo xtask corpus --affinity` fetches 22 public
CC0/MIT/Apache-2.0 documents at pinned commits, sha256-verified; the new
engine test renders each and compares it with Affinity's own thumbnail
(0-4.4 of 255 mean difference, per-file ceilings). import_fuzz mutates a
synthetic native document's stream and container through open, render
and export; the fuzz crate gains a stream target.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GQPh8UDgMyARR5Hat9UchC
The PostScript Language Reference (3rd ed., §3.7.3 "Save and Restore")
has `restore` reset composite objects in local VM to their values at the
`save`. The reader only restored the graphics state, so dictionary
entries changed between `save` and `restore` stayed changed: a program
that counts its open saves in a dictionary and refuses to go past a depth
stopped after that many saves in sequence, and the file fell back to its
preview. EPS files with many images, each drawn between `save` and
`restore`, are a likely case of #505; its reporter hasn't sent a file, so
this is part of it.
- While a `save` is open, `def`, `store`, `put`, `undef` and dictionary
`copy` keep each entry's old value in a journal (counted against the
memory budget); `restore` undoes it, newest change first, down to its
save. A save restored already, itself or through an outer one, is no
longer valid (`invalidrestore`, §3.7.3).
- `cachestatus` reports a device's cache sizes (chapter 8) instead of
zeros: its last value, the most bytes one cached glyph may take, is what
programs divide by.
- Tests (programs written from the reference): 100 saves counted in a
dictionary under a depth limit, each dictionary change undone, saves
restored twice, `cachestatus`'s glyph limit. Mutation-checked: without
the journal or with a zero `cachestatus` the test fails. The import fuzz
vocabulary has saves and restores around dictionary changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An image can take one data source per colour component
(MultipleDataSources, or `colorimage` with multi true). The PostScript
Language Reference (3rd ed., §4.10 "Images" and `image`/`colorimage` in
chapter 8) has the operator read the sources in turn, the same amount
from each. The reader drained each source on its own instead: when the
sources are procedures reading one file a row at a time, the first plane
took the rows of every component and the image came out in sheared
horizontal bands, as in #498.
- Data sources are read in turn by one reader, `read_sources`: a procedure
once a round, a file or string a row a round, until each plane is full or
its source ends. Single sources, procedure filters and masked images use
it too; a string source resumes where it left off.
- Tests (`tests_images.rs`, programs written from the reference):
procedures reading one file in the dictionary and `colorimage` operand
forms (fails without the fix), separate string sources, rows padded to a
byte at 1, 2, 4, 12 and 16 bits with an odd width (one and several
sources), Flate PNG predictors with every row filter at an odd width.
The import fuzz vocabulary has several sources reading one file and
sources of uneven lengths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two EPS import tests become programs written from the PostScript Language
Reference (3rd ed.), with their own names and structure, covering the
interpreter features the importer relies on:
- `level_2_and_3_probes_read_as_vectors`: a resource category made from
Generic, resources defined and found in it (§3.9), local and global VM
(`currentglobal`, `setglobal`, `gcheck`, §3.7.2), `internaldict` probed
through `stopped`, a halftone dictionary set and restored, `cachestatus`,
`rootfont` and `currentcolorrendering`, drawing with its own procedures.
- `executable_strings_and_integer_keys`: shading dictionaries closed by an
executable string (`(>>) cvx`, or a Level 1 builder with `counttomark`),
procedures kept under integer keys run with `load` through `stopped`,
`cvx`/`cvlit`/`xcheck` on strings.
Each was mutation-checked: making any of findresource, defineresource,
currentglobal, setglobal, gcheck, internaldict, sethalftone,
currenthalftone, currentcolorrendering, cachestatus, rootfont, stopped,
cvx, load, counttomark, cvlit or xcheck unknown fails a test, and so do
strings that `cvx` leaves literal, `load` refusing integer keys and
`gcheck` answering true.
The ROADMAP's EPS paragraph, file-formats row and last-updated line state
the PostScript features the reader supports; the legacy `.ai` comments in
the import module and the interpreter cite that format's published
specification (PRONOM fmt/423) for the `%AI` header comments and `u`/`U`
group operators the reader keys on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Type left unfinished when a layer's marked content ends, and a clip that closes in a later layer,
stay in their own layer (no stray "Page N" layer, no art moved to the next layer).
- Top-level layers stack as the pages mark them, so a layer whose art starts on a later page keeps its
place; layers marked with no art come in empty.
- A stroke written as each glyph's outline stroked, right after (or before) the type, becomes the type
object's stroke above (or below) its characters: the type stays one editable object.
- Spaces read from gaps wider than a space get their own tracking where even tracking would put the
glyphs after them more than a tenth of an em off (barcode digit groups); lines are measured to their
last visible glyph, so a wrapped line's trailing space no longer spreads into the tracking.
- Lines wrapped in a frame (each wrapped line ending in a space, one left edge, font, size and leading,
with an optional paragraph spacing) come back as one area type object, left aligned or justified,
only where laying it out breaks the lines exactly where the file does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Read only the indexed PNG thumbnail observed in version-12 Affinity containers. Bound and validate the PNG before decoding, warn about omitted native content, clear the source save target, and reject auxiliary imports that cannot display that warning. Add malformed-input, lifecycle, property and optional native-oracle tests plus a fuzz target. Editable native layers and Affinity export remain unsupported.
A Shift-drag marquee only ever added to the selection, so there was no way to
take some of the selected objects out with it. As in Illustrator, Shift-drag
now toggles what the marquee reaches: the selected ones are deselected, the
others selected, the rest of the selection stays.
- Selection tool: the Shift marquee runs select.toggle, which now also takes
{ids} (each one toggles).
- Direct Selection and Group Selection: the Shift marquee toggles the anchors
inside it (select.anchorsMany mode "toggle"); a path left with none leaves
the selection, one with all of them is selected whole again.
- select.anchorsMany takes mode "set"|"add"|"toggle"|"subtract" (add: true is
still mode add). Adding anchors of a path selected whole keeps it whole, and
anchor references outside the path are ignored.
- Lasso: Shift adds and Alt subtracts through the same command, so an Alt lasso
no longer drops selected type, groups and other non-path objects.
- Tests at the tool, engine (Session::pointer) and MCP (pointer_gesture) levels,
command sweep cases for the new modes; docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stock EPS files saved in the Illustrator 8 format failed with "typecheck in `a
dictionary`": its gradient procset builds shading dictionaries with `bd` …
`ed`, where `ed` is `(>>) cvx` (or a Level 1 dictionary builder as a
string), and `cvx` left a string literal, so `shfill` got a string. Its
`discard` procedure also `load`s procedures by integer keys, which `load`
refused.
- Executable strings: `cvx` makes a string executable (`xcheck` true,
`cvlit` back, still a `stringtype` for `length`/`get`/`forall`/
`getinterval`); run by name or met in a procedure, it runs its text as a
program, every time (an executable file shares the same runner).
- `load` takes any key (integers, booleans), as `where` already did.
- Test: an Illustrator 8-style gradient procset with both `ed` forms and
`discard`; the import fuzz vocabulary has executable strings and integer
keys. An Illustrator 2026 file saved in the Illustrator 8 format (made
here, not committed) now opens as vectors with its radial gradient.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discord feedback: "EPS files are always rasterized: they open as bitmaps, in
other programs as vectors". Every EPS saved by Illustrator 2026 fell back to
its TIFF preview (`gcheck` was unknown), and cairo/Inkscape files stopped at
their first image (`status`), dropped masked images (ImageType 3) and failed
on mesh gradients; the warning didn't say where the program failed.
Fallback never silent:
- The warning names the PostScript error, the operator that raised it and
the named procedures it ran in, innermost first ("a PostScript error
(typecheck in `add`), in `inner` in `outer`"); errors caught by `stopped`
aren't reported. It reaches the status bar, document.open, app.open and
file.open (which now return document.open's result, so MCP's open_file over
the control channel gets it), and `vectorcraft-cli info` ("warnings").
- A file whose PostScript can't be read opens as its TIFF preview, else its
Windows metafile preview (as vectors, scaled to the bounding box), else its
EPSI bitmap. es @msg rows for the new messages.
Interpreter:
- Operators programs probe or use: gcheck/scheck, rootfont,
currentcolorrendering, currenthsbcolor, status, token, read,
bytesavailable, fileposition/setfileposition, resetfile, write*, pdfmark
(marks dropped, as Ghostscript does), execform, nulldevice, strokepath,
pathforall, user paths (ufill/ueofill/ustroke/uappend/upath/setbbox, the
encoded form too), setcachedevice2, findcolorrendering, cache, device and
VM queries, revision; (%stdout) (w) file gives a sink.
- `//name` is replaced by its value when read, inside procedures too.
- Tiling patterns become pattern swatches (their PaintProc drawn in pattern
space, one cell; uncoloured ones in the colour under them; makepattern
copies share one swatch); nested patterns stop at 8 levels.
- Type 3 fonts draw their glyphs (BuildGlyph/BuildChar, widths from
setcachedevice/setcharwidth) as outlines grouped per string, spaced by
ashow/widthshow/awidthshow/xshow/yshow/xyshow/kshow; glyphshow and
stringwidth/cshow use them.
- Shadings of types 1 and 4-7 become gradient meshes (data from arrays,
strings or files, packed or not, flags sharing edges), as fills through a
shading pattern too; sampled functions (type 0) are evaluated;
GradientMesh::coons/triangle are shared with PDF import.
- ImageType 3 masked images, interleaved by sample, by row or in separate
sources; ReusableStreamDecode reads its data when made; Flate/LZW PNG and
TIFF predictors.
- Bounded: DeviceN at 32 inks, sampled functions at 2^24 samples and 32
outputs, 4096 patches a shading, strokepath ignores dashes finer than 1e5
pieces, Type 3 glyphs nest 8 deep (a glyph that shows itself overflowed the
stack before the limit), 64-bit index maths for 32-bit targets.
Tests: a synthetic program per generator (cairo/Inkscape, its Type 3 fonts,
matplotlib, CorelDRAW, Affinity, LibreOffice, Ghostscript eps2write,
Illustrator procsets), meshes and function shadings, masked images, fault
messages, probing operators, metafile/EPSI previews, `//name`, user paths,
hostile patterns/glyphs/shadings (run against main, 12 of the 14 generator
and feature tests fail; CorelDRAW- and LibreOffice-style programs already
read there). The import fuzz vocabulary covers the new operators. Checked
against real files made here with Inkscape 1.4 (cairo) and Illustrator 2026
(its own format and the CS-to-CC compatibility formats; all fell back or
stopped early on main and open as vectors now; its Illustrator 8 format
needs the next commit); those files aren't committed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Legacy PostScript .ai files (Illustrator 3-8, and their EPS) open through
the EPS interpreter, which only recorded what was drawn: every group came
in flattened. In a file in Illustrator's format (its %AI comments, or
Illustrator named as the creator) the `u` ... `U` it writes at the top
level now open and close groups, whatever its prolog defines them as, so
groups come in nested as they were, between and inside clipping groups.
clipnest's Clip carries an optional region: without one it is a plain
group, nested in the same chain as the clips (ids given in opening order,
so a chain of clips and groups sorts by id).
Clips nested without end used to nest clipping groups past the stack
(a stack overflow in EPS and EMF/WMF import): clips and groups now nest
at most 128 deep with a warning, and each object's chain counts against
the EPS reader's drawing budget.
PDF-compatible .ai (Illustrator 9+) can't get the same: its PDF content
draws each object on its own and doesn't mark plain groups (only layers,
clipping groups and groups with opacity, blending or a mask, which
already come back); the groups live only in the private data, which is
out of scope. Documented in ROADMAP and docs/mcp.md.
Addresses Discord feedback.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Laying out type (show, stringwidth, cshow) costs about 300 operations plus
64 a character, measured, and now counts that much against MAX_OPS: a
300-byte file running cshow over a 4 MB string took 60 s, and
{ (a) stringwidth pop pop } loop ran for over 5 minutes (already the case on
main); both now stop with "the program runs too long" within seconds.
Tests: executable filters run inside themselves stop at the nesting limit
(directly, mutually and under stopped), currentfile cvx exec runs nothing
twice, cshow over a long string is refused; the hostile PostScript fuzz
tokens gain self-recursive filter execution, currentfile filters, cvlit and
cshow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#249 made the reduced repros of #234 open, but a real file saved by the
reference app (version 30) still fell back to its screen-resolution preview
with "typecheck in `a dictionary`". Running its prolog to the end needed:
- The standard dictionaries (systemdict, userdict, globaldict, statusdict,
errordict, $error) as values in systemdict, so `/globaldict where
{ /globaldict get begin } if` gets a dictionary, not an operator.
SharedFontDirectory names the font directory too. errordict has a
handleerror for prologs that wrap it.
- `dictstack`, `internaldict`, `currentsystemparams` and
`currentuserparams` (with the cache sizes programs `get`), and `cshow`.
- Executable files: `cvx` and `cvlit` set a file's attribute, `xcheck`
reads it, and executing one runs its data as a program, as the prolog
does with `(...) 0 () /SubFileDecode filter cvx exec`.
- SubFileDecode with a count of 0 and an empty end string passes its
whole source through instead of nothing.
- `flushfile` on a filter over the program's data skips that data (the
file's XMP packet). A filter chained from a pending one leaves it
nothing to skip, so the writer's own `VCsrc flushfile` is unchanged.
The interpreter empties its standard dictionaries when it finishes, since
systemdict now holds itself. Both real files tested now import as 15
vector paths in CMYK with no warnings, and round-trip through SVG and PDF
pixel for pixel. The EPS fuzzer exercises the new operators.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EPS files the reference app saves (its procsets in the prolog, a binary header with a TIFF
preview) now open as editable art instead of failing with "undefinedresource in Generic". When
their PostScript still can't be read, the palette preview they carry is placed with the usual
warning instead of the file being refused.
Root cause: five interpreter gaps and one preview format. The Generic and Category resource
categories didn't exist, so categories couldn't be made from Generic (now Category holds the
standard categories, defineresource in Category makes new ones, undefineresource is added);
clipsave/cliprestore were unknown (now a clip stack in the graphics state); systemdict's
languagelevel was the operator, not the integer 3; getinterval copied arrays and strings
instead of sharing their storage, so astore into a subarray was lost (arrays and strings are
now views into shared storage, and readstring/readline return the part they fill); and
resourceforall was unknown (now enumerates matching names with * ? \ templates). The preview
is an 8-bit palette TIFF with an alpha sample, which the image crate can't decode: a small
bounds-checked reader handles that layout (either byte order, any strips).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type and symbol instances attached to a plane keep their art and carry a projection
(Node.perspective.projection, append-only); the canvas and every export draw their outlines
through it (reshape/bake), so they are foreshortened and stay type and symbol instances. Bounds,
hit testing and transforms follow the projection. Object › Perspective › Edit Text
(perspective.editText, or double-clicking with the Perspective Selection tool) shows the type flat
where it is drawn in isolation mode; exiting isolation projects it again. Release with
Perspective keeps their look. Copies, pastes, duplicates and Selection-tool moves keep the
attachment (the art moves as dragged). Flare, spiral and polar grid draw on the active plane, and
so do the click-to-size shape dialogs (perspective.draw `at`: sizes in plane units).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid keeps per-plane offsets (leftOffset, rightOffset, groundOffset). Each plane has a widget
(a diamond in its colour) that the Perspective Grid and Perspective Selection tools drag: plain
moves the plane, Shift moves the objects on it too, Alt copies them (perspective.plane.move).
Double-clicking a widget, or ui.perspectivePlane, opens the plane's options dialog (location; Do
Not Move / Move All Objects / Copy All Objects). Object › Perspective › Move Plane to Match Object
(perspective.plane.matchObject). New objects attach where the plane is. Grid edits leave
attached art in place as the reference app does; perspective.grid.set {reproject: true} moves it
with the grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Pins show as soon as the tool has art selected: automatic ones at the
centre and the middle of each limb's end (at least three), until pins are
placed. They stay across tool switches while the selection is unchanged and
a new selection starts afresh.
- The pins live in the document (Document.puppet, never saved) with the rest
shape they started from: every warp starts from it, so warps don't stack and
dragging a pin back restores the original; Undo/Redo take the pins back with
the art. Adding and deleting pins are undo steps too.
- object.puppetWarp gains rest: true (the tool's pins); the new query
object.puppetWarp.pins reads them. A click off the mesh adds nothing and
says so (not-allowed cursor, canvas label); the command refuses such pins.
- The mesh grid covers the expanded art, so tiny art with a wide Expand no
longer allocates millions of cells.
- Tests on groups, compound paths and open strokes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selected blend shows its spine. Direct Selection drags spine points
and handles, the Pen tool adds and deletes points on a selected
blend's spine (object.blend.spine.moveAnchor/addAnchor/removeAnchor).
The straight spine becomes a path on the first edit, its points pinned
to the key objects (append-only BlendSpec.key_anchors): moving a key
moves its end of the spine and the other way round; spines from older
files and Replace Spine still spread the keys evenly. Direct and Group
Selection pick blend keys on the canvas, edits redraw the blend live,
and Release leaves the spine as a path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Blend Options is a dedicated dialog (Spacing dropdown with its value,
Align to Page / Align to Path buttons, live preview) opened on the
selected blend's own options, so OK no longer turns Smooth Color into
5 steps; with nothing selected it sets what new blends start with
(object.blend.info reads them). The Blend tool blends from clicked
anchor points (blend spec `starts`), adds keys to an existing blend
instead of nesting it, opens Blend Options on double-click, Alt-click
and its toolbar button, and has its own cursors and hint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Selection tool shows the selection's bounding box in perspective; its handles
scale in plane space (perspective.transform; Shift proportional, Alt from the centre). Alt-drag
moves copies that stay attached, pressing 5 while dragging moves along the plane's normal
(ToolKey::Digit, delivered by the canvas and MCP press_key), and the arrow keys nudge in
perspective (perspective.nudge). Transform Again repeats the last perspective move or scale in
plane space. Attachments (plane and depth) now live on the objects (Node.perspective), so copies,
duplicates and pastes keep them; grids from older files hand theirs over. Homography moves to
vectorcraft-geom. Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid > One/Two/Three Point Perspective list the built-in views
([1P/2P/3P-Normal View], plus Low and High views generated in code) and the saved
presets of each type; Save Grid as Preset... and Define Grid's Preset menu and Save
Preset... save the fields. Edit > Perspective Grid Presets... (previously a
mislabelled reset to the two-point grid) manages them: New, Edit, Delete, Import,
Export (.vcperspective), stored with the preferences. New commands
perspective.presets.list/save/delete/export/import; perspective.grid.preset takes
a preset name. Preset import is fuzzed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a Liquify tool opens its Tool Options (dialog liquifyOptions):
the shared Global Brush Dimensions (Width, Height, Angle, Intensity, Use
Pressure Pen), the tool's options (Detail, Simplify with its checkbox, Twirl
Rate, Complexity, Brush Affects, Horizontal/Vertical) and Show Brush Size.
The canvas captures pen pressure from pen/touch force, ui.pointer and MCP
pointer events take `pressure`, and object.liquify takes [x, y, pressure].
Fixes: LiquifyParams::to_json now sends affectAnchors/In/Out; Alt-drag sizes
the brush from its current size (Shift keeps proportions) instead of
collapsing it. Hint-bar text for the seven tools. Registers the MCP Liquify
tests file added in M8.2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Alt-dragging near (not on) a selected pin turns the art around it; the pin
keeps that turn through later warps. arap::Pin gains an angle constraint and
object.puppetWarp takes angles: [deg|null...].
- Shift-click adds pins to the selection or takes them out; dragging a pin
moves every selected pin. Select All Pins selects them all (it used to
deselect). Alt-click no longer deletes a pin; Delete removes the selection.
- Control bar: Expand (0 allowed), Show Mesh (on by default), Select All
Pins. Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic
dotCooCoo
DWAA1660
Matthew Farrow
Riccardo Balloch
HT
callmeBalloch
haven
EthanSuquet