As the branch does for older tests: `panic!("…")` instead of
`unreachable!()` in test code (clippy.toml only allows unwrap, expect and
panic there), and the integration tests main added (CLI file I/O, render
gradient text and stroke geometry, SVG export suites) opt out of the
unwrap/expect/panic lints. No test logic changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient panel's Stroke buttons now work: with the Stroke proxy on a
linear or radial gradient they lay it within the stroke (placed on the
page, as before), along the path (start to end of each subpath) or across
it (left edge to right edge; inside/outside strokes span their visible
side). `paint.editGradient {stroke: true, strokeMode}` sets it (new art
too with nothing selected); `document.inspect` reports
strokeOptions.gradientMode. Model: StrokeLayer.gradient_mode (default
Within, not written).
Shared geometry in effects::stroke::gradient: ribs on the bisectors of
the flattened path (fans round sharp corners, widened under arrowheads,
following width profiles) cut slices each painted with a linear piece of
the gradient (Gradient::span). The canvas and raster export clip them to
the stroke's outline and arrowheads, grown a pixel and composited with
copy so there are no seams and translucent stops paint once. SVG and PDF
write the same slices clipped to the outline, with a warning (new
vectorcraft_svg::export_with_report). Outline Stroke and Expand make
gradient meshes clipped to the outline. Mesh quads now grow along their
edges so thin quads show no seams. Dashes, profiles and arrowheads keep
working in both modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a width point opens Width Point Edit (Side 1, Side 2, Total Width, a link
keeping the sides equal, Adjust Adjoining Width Points, Delete; dialog `widthPoint`, also
`ui.widthPointEdit`). Shift-click selects several width points, which drag and widen together
as one undo step; Alt-dragging a point's centre copies it (`stroke.widthPoint.copy`); dropping a
point onto another makes a discontinuous point (two points at the same t), and the stroke's
width steps there. `stroke.widthPoint.set` takes `adjustAdjoining`, keeps a discontinuous point
when only its widths change, and `stroke.widthPoint.remove` takes `indices`. Flipping a profile
along the path swaps the sides of its steps; `document.inspect` reports `widthPoints`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paths and compound paths now measure their visual bounds along their shape:
the body (inside/outside alignment, the width profile's widest point), the
tips of the miter spikes the limit keeps, projecting caps' corners and the
arrowheads' reach. A rectangle's right-angle miters stay within half the
weight (Fit to Selected Art, Rasterize and all-art SVG export get tighter,
exact boxes); Appearance::outset is the conservative reach for anything else.
Clicks hit what the strokes paint: outside strokes outside the path (0.8 x the
weight out), inside ones inside, the profile's width where clicked, caps,
spikes and heads. Click culling keeps a cheap box (hit test 0.34 ms per click
on the 50k-path budget). The subpath/tangent helpers move from the stroke
geometry into vectorcraft_geom::bez so both share them; a cross-check test
holds every painted point of the real stroke geometry inside the bounds and
hittable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrowhead gains 30 original shapes generated in code, appended after the first
ten so saved names stay stable: Barbed, Half Arrow (left/right), Concave,
Double Arrow, Chevron, Feather, Swallowtail, Reverse Triangle, Triangle to Bar,
Kite, Leaf, Drop, Half Circle, Oval, Target, Tag (+ open), Diamond (open),
Hexagon (+ open), Star, Cross, Plus, Double Bar, Dot on Bar, Slash, Double
Slash, Bracket and Fork. Each is drawn in local units of the head's weight
inside the usual 4 x 4 box, with its own stop for the stroke under it.
Arrowhead::label() names them in the menus. The Stroke panel's arrowhead
dropdowns render every head as the canvas draws it (cached textures, a shared
widgets::doc_preview that the Brushes panel now uses too) in a scrolling list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each dash and dot of a profile stroke is as wide as the profile where it sits
along the whole path (before, dashes dropped the profile). Corners of profile
strokes take the stroke's miter (within the miter limit), round or bevel join on
the outer side and stay clean on the inner side, instead of a miter clamped at
4x; smooth points of curves bend round. Canvas, SVG/PDF outlines and Outline
Stroke share the geometry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With alignDashes every run between corners and path ends holds a whole number of
periods, scaled to fit, with a dash (or dot) centred on each corner and on both
ends of an open path. It lives in the shared dash generator, so the canvas, SVG
and PDF export (as outlines) and Outline Stroke all draw it.
stroke.set: alignDashes and dashOffset edit the current pattern on their own, and
a new dash array keeps the offset and alignment it replaces. The Stroke panel
turns dashes on fitted to corners (or as last turned off), and its Exact/Fit
buttons send only the flag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both writers now ask the shared stroke geometry how to write each stroke
(effects::stroke::for_writer): a plain stroke where that is exact, else the
canvas's filled outlines (arrowheads, width profiles, dashes fitted to corners,
dots with round or projecting caps), grouped under the stroke opacity when the
line and its heads overlap. Brushed strokes are written as their brush art.
Inside/outside alignment only applies to closed paths, so open paths export as
centred strokes. The PDF outside-stroke clip frame and the SVG outside mask now
cover the whole stroke reach (miter spikes, projecting caps). SVG stroke
gradients use the same paint box as the canvas. The svg crate docs no longer
claim arrowheads, profiles, brushes and effects are dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Outline Stroke (and the stroke part of Expand) now builds each stroke from the
shared canvas geometry: dash shapes, arrowheads, width profiles and inside/outside
alignment, united into one clean path (pathops::stroke_region). Every stroke item
is outlined in paint order (runs of fills stay on copies of the path), stroke
opacity, blend mode and effects move to the new fill, and brushed strokes become
their brush art. The live Effect > Path > Outline Stroke outlines the stroke it
sits on (on a fill or the object: the top stroke) with that stroke's cap, join,
dashes, alignment, profile, arrowheads and weight: GeomContext now carries the
stroke and the fill rule, built per item by the renderer, export baking and
Expand Appearance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merged dasher clamped negative entries to zero, which turned [-5, 3] into dots instead of the
solid line SVG and PDF draw for an invalid pattern (render test invalid_dash_pattern_strokes_solid).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hollow heads draw as rings (the open arrow as a chevron) and closed paths get
no heads. The stroke stops under each head, so it never shows through a hollow
head or past the tip; stroke.set {arrowAlign: "extend"|"tip"} chooses whether
the tip extends past the end point (default) or sits on it with the stroke
shortened. Line and heads share one paint box (a gradient runs on into the
head) and take the stroke and object opacity once, as one layer on the canvas
and one group in PDF. StrokeLayer.arrow_align is a new defaulted field, so
older files load unchanged. The Stroke panel's Align buttons get two generated
icons and are disabled when the stroke has no head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shared stroke geometry now has its own arc-length dash generator: a dash
of length 0 becomes a dot that a round cap paints as a disc and a projecting
cap as a square turned along the path (a butt cap paints nothing). Dashes
restart per subpath, join across the start of closed subpaths, and a pattern
too fine for the path draws solid. The canvas and raster export use it through
line_outline; the stroke.set params doc says how to get dots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrowheads, width-profile outlines and dashed line outlines now come from
vectorcraft_effects::stroke (stroke_pieces, line_outline, width_outline), used by
the canvas and PDF export alike; the renderer caches profile outlines too. Width
profiles are a doc-level catalogue (WidthProfile::PRESETS, preset, preset_id,
id_of) shared by stroke.set and the Stroke panel; stroke.set rejects unknown
profile ids and its params doc lists the arrowhead names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic