Held Space always panned, whatever else was held, so the temporary Zoom
tool keys did nothing. Held Space is now the Hand tool and Cmd+Space the
Zoom tool (Alt: out), whatever the active tool, for the press and the
cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The canvas always switched to the Selection tool for a Cmd press with a
non-selection tool. The UI state now remembers which of Selection,
Direct Selection and Group Selection was used last, and the temporary
switch uses it, so Cmd-dragging an anchor while drawing with the Pen
after using Direct Selection moves that anchor, not the whole path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a bounding-box handle of area type with the Selection tool now
resizes the type area: the text reflows at its own size (threads too)
instead of being scaled, and History says "Resize Type Area". With other
objects selected they scale as before while the area type resizes its
frame. Direct Selection picks the frame's corners and edges and reshapes
the area ("Reshape Type Area", new command text.reshapeArea), and the
selected frame's anchors and outline show. Area Type Options gains Width
and Height. Point type, rotation, Object > Transform > Scale, the Scale
tool and the Transform panel still transform the type.
Root cause: every handle drag previewed object.transform, which folds the
matrix into the text's xf (TextObject::transform), so area type scaled its
glyphs; and Direct Selection's anchor hit test only looked at paths, so the
frame's corners could not be picked. object.transform now takes
typeAreas, which reshapes the frame in text space (xf^-1 * m * xf), and
the tools use it and text.reshapeArea.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In vertical type every character now sits in its own cell down the column:
"10" and "22" in 「10月22日」 stand side by side in one em, centred on the
column, and 月/日 start right after them. Justified (Justify All) columns
no longer split a tate-chu-yoko block, and tracked or justified upright
characters stay on the column's centre line instead of drifting across it.
Root cause: in 0.3.1 (the reporter's build) upright glyphs were placed by
the font's ascent rather than the ideographic em box, so a font with a tall
ascent (Noto Sans CJK JP, 1.16 em) drew each upright character ~0.28 em
down into the next cell, onto the sideways digits; #208 (after 0.3.1)
replaced that with em-box placement and tate-chu-yoko, which this commit
locks in with regression tests. Two defects of the same kind remained:
Justify All added its inter-character gap inside a tate-chu-yoko block
(the block's second digit slid down the column, away from the first), and
upright glyphs turned about the middle of their advance, which tracking and
justification lengthen, instead of the middle of their own cell.
Tests: the issue's layout with bundled glyphs (cells one after the other,
every ink inside its cell and no overlaps, 2-3 digit blocks one em and
centred, single digits and 2026 on their side advancing by their length,
spaces), the issue's string with craft-fonts' Japanese face (skips without
craft-fonts), Justify All with a block, tracking.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tool chose scale, distort, perspective or shear from the modifiers at
the press only, but a Cmd press on the canvas is the temporary Selection
tool, and the documented gesture is to start dragging and then hold Cmd.
A handle drag now follows the modifiers held during the drag; when the
operation changes, the interaction restarts so the undo step is named
after what was done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The navigator's buttons were painted only and its number was always 1,
and Fit Artboard in Window and Actual Size always used the first
artboard. The per-document View now keeps the navigator's artboard; the
new view.goToArtboard UI command (an index, or first / previous / next /
last) sets it and fits it in the window, and the four buttons call it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A double-click on a tool button runs tool.options, which only knew a few
tools, so the common double-clicks did nothing: the Hand tool now fits
the artboard in the window, the Zoom tool shows 100%, and Rotate, Scale,
Reflect and Shear open their Object > Transform dialog (when something
is selected, like the menu items).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The export tool's description, the docs' open_file and export rows and the
CLI's run/convert usage listed only some formats. The CLI usage now prints
the writable extensions next to the readable ones, both generated from the
format table (export_extensions), the export tool points to its generated
format enum, and the docs name EPS, DXF, EMF, WMF, SVGZ and templates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rulers were only painted. A drag from the top ruler now previews a
horizontal guide and adds it with guide.add where the button is released
on the canvas; the left ruler makes a vertical one. Released anywhere
else, nothing is added. Guides are shown when one is made this way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese covered 36 menu labels after #145; every other label stayed
English. ja.tsv now holds all 556 interface menu labels, in menu order,
including both readings of every toggle, plus the labels added since: the
Language menu's Automatic and the canvas context menu's. #145's 36 entries
are unchanged. Kept in English, as for Czech: the product name, language
names, OpenType, the built-in workspace names and the bracketed perspective
grid presets.
The Czech coverage test becomes menu_catalogs_translate_every_menu_label,
run for Czech and Japanese. ROADMAP and docs/development.md say both cover
every menu label.
Ported by the maintainers from the Rust table of the original PR onto the
catalog framework (#205): the placeholder labels of recent-file, recent-font,
user-preset and user-library slots are left out (the menus show the names).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#226, #227 and #243 landed without their ROADMAP lines: Shipped so far now
says DXF Fit and Aligned text span their two points, Effect > Pathfinder
groups several loose objects first, and names are never translated; the
Last updated line counts the 2026-10-07 issue fixes. Scores unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EPS files the reference app saves (its procsets in the prolog, a binary header with a TIFF
preview) now open as editable art instead of failing with "undefinedresource in Generic". When
their PostScript still can't be read, the palette preview they carry is placed with the usual
warning instead of the file being refused.
Root cause: five interpreter gaps and one preview format. The Generic and Category resource
categories didn't exist, so categories couldn't be made from Generic (now Category holds the
standard categories, defineresource in Category makes new ones, undefineresource is added);
clipsave/cliprestore were unknown (now a clip stack in the graphics state); systemdict's
languagelevel was the operator, not the integer 3; getinterval copied arrays and strings
instead of sharing their storage, so astore into a subarray was lost (arrays and strings are
now views into shared storage, and readstring/readline return the part they fill); and
resourceforall was unknown (now enumerates matching names with * ? \ templates). The preview
is an 8-bit palette TIFF with an alpha sample, which the image crate can't decode: a small
bounds-checked reader handles that layout (either byte order, any strips).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Strings in code stay English and are the lookup keys; `crates/ui-egui/src/i18n`
maps them to display text at render time from one `*.tsv` catalog per language
(`LANGUAGES` registry, `tl!`/`t`/`tr`/`tr_ctx`/`tr_id`/`tn`/`fmt`). Command ids,
menu paths, `ui.menu.list`, the control channel, the CLI, MCP, status messages
and undo labels never see translated text, so agents, scripts and the existing
tests are unaffected (under `cargo test` the UI is always English).
Wired: in-window menus and the macOS native menu (rebuilt on a language change),
dynamic labels (Undo X, Reset X, Last Effect: X as templates), the command
palette (matches English and translated text), dock tabs, panel tooltips, the
toolbar (category names now cut by characters, not bytes), the dialog frame, the
shared widgets, the Preferences dialog, the shortcut editor, the hint and status
bars, the Home screen, and the literals of every panel and dialog.
Preference `interfaceLanguage` (User Interface › Language): `auto` or a code.
`auto` follows `VECTORCRAFT_LOCALE`, `LC_ALL`/`LC_MESSAGES`/`LANG`/`LANGUAGE`,
the macOS preferred languages and, on Windows (which sets no `LANG`), the user
locale from `HKCU\Control Panel\International`. `zh-TW`/`zh-HK`/`zh-MO`/
`zh-Hant-*` resolve to `zh-hant`; Simplified locales stay English until a
`zh-hans` catalog exists.
`zh-hant.tsv` (~2,850 rows) is clean-room, in the vocabulary used in Taiwan;
terms shared with PhotoCraft reuse its wording, vector terms use everyday
vector-drawing vocabulary. Tests: catalog well-formedness (placeholders,
ellipses, command ids, no Simplified characters), locale resolution, and two
coverage tests that fail when a menu string, panel/tool/preference label,
dialog button, hint-bar fragment or `tl!` literal has no row in a language
marked `complete_menus`. `VECTORCRAFT_I18N_DUMP=file cargo test -p
vectorcraft-ui-egui dump_source_strings` lists the strings for translators.
Also: two clippy findings under rustc 1.97 fixed in passing.
Integrated with main (squashed onto it, 42 commits on): the Czech interface
(#213) moves from its Rust table to `i18n/cs.tsv` on the registry (all 556
rows, Czech plural rule, its menu-coverage and glyph tests kept); Find Font's
resolution notes and the canvas context menu's labels are translated and
covered by the catalog tests (`menus::CONTEXT_LABELS`); the glyph test checks
CJK text only when the craft-fonts build input is embedded (#220 moved the
Japanese fonts out of this repository); a language saved by an older version
carries over to `interfaceLanguage`; Windows' locale lookup runs reg.exe by its
full path.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The server answered tools/* and two fixed resources and nothing else, and
resources/templates/list returned an empty array. This adds the rest of the surface a
client can actually use, against 2025-06-18.
- prompts/list and prompts/get: five workflows (poster, icon-set, recolor,
trace-and-style, export-set) with templated arguments. A missing required argument
is -32602 and names itself.
- resources/templates/list, and resources/read for the templates: object/{id},
command/{id}, effect/{id}, swatch/{name}. Reading one thing at a time instead of
vectorcraft://document/json, which on a real document is thousands of lines an agent
pays for again on every change.
- completion/complete for prompt arguments and template variables, ranked prefix
first, capped at 100 with total and hasMore. The values are read live, so a suggested
format, effect id, command id, trace preset, swatch or object id is one the engine
has.
- logging/setLevel and notifications/message. Nothing installed a log::Log before, so
the engine's log::debug! calls went nowhere; this is the sink, silent until asked.
Installing it is vectorcraft-cli's job rather than the library's, so an embedder
that already has a logger keeps it.
docs/mcp.md gains a Protocol section with the capability table and a Not implemented
section: subscriptions, progress, cancellation, sampling, elicitation and Streamable
HTTP all need the transport to interleave reads, which this one does not — handle_line
answers a line with a reply, so it neither reads an incoming cancellation nor can write
progress before the reply it belongs to.
62 tests (50 unit, 12 property/fuzz). protocol_props.rs gained five: prompts survive
junk arguments, completion/complete never panics and always answers at most 100
string values with a consistent hasMore, every template reads or fails cleanly, and
prompts/completions/templates are swept with junk params while asserting the document
comes back byte-identical.
ROADMAP: one bullet under Automation in Shipped so far and the changelog line. The
parity table and the gap list are untouched — MCP is agent automation, so feature
parity does not move.
Conflicts with #214 (fonts by PostScript name): this branch's name index (FaceKeys,
aliases) stays, and #214's `by_postscript_name` (used by PDF import) reads a PostScript
map filled from it, keyed by the same normalized names.
Removed: scanning ~/Library/Application Support/Adobe (CoreSync/plugins/livetype and
Fonts), and the preference that switched it (Type › Include Fonts of Other Design Apps'
Folders). Fonts activated through another vendor's subscription are licensed for use
through that vendor's own sync; reading their files from VectorCraft would go around that
licence, and the project's clean-room rules keep VectorCraft out of other vendors' files.
Fonts the user has installed in the system or user font folders are still found by every
name, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-clicking the canvas now opens a context menu, as the reference app
does. The object under the pointer is selected first unless it already is.
The menu then lists what applies to the selection: Undo and Redo, Cut, Copy,
Paste, Isolate Selected Group or Exit Isolation Mode, Group and Ungroup,
Join and Average, Make or Release Clipping Mask and Compound Path, Make
Guides, the Transform, Arrange and Select submenus, and Export Selection.
On empty canvas it lists Paste, the zoom commands, the ruler, grid and guide
toggles and Select All. Commands that can't run now are left out (Undo and
Redo stay, greyed out), and a press on the canvas only closes the menu. Agents list the same menu with the
`ui.contextMenu.list` control method.
Root cause: the canvas ignored the secondary button except in the toolbar's
tool flyouts; there was no context menu at all. The menu reuses the menu
bar's items, rendering and dispatch; Object > Transform and Arrange are now
shared lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Live Paint Bucket now fills areas enclosed by any paths. Crossing
lines enclose faces it can fill, a line across a shape splits that shape's
face in two, and an area enclosed by paths becomes a face even when nothing
fills it (it starts unfilled). Edges are the paths cut wherever another path
meets them, keeping their stroke, so Shift-click paints each piece. Closed
shapes give the same faces as before.
Root cause: Live Paint built its faces from the Pathfinder regions, which
divide the filled areas of closed shapes. An open path counted only as the
area it would fill if closed, which for a straight line is nothing, so lines
divided nothing and the bucket found no face to fill. A new planar map in
vectorcraft-pathops (live_paint) sweeps every path as an edge: an open path
goes in traced there and back, with crossing counts that never cancel; faces
are walked on the resulting graph (holes included), and their fills and the
edges' sources are found geometrically. The sweep runs in an exactly sheared
frame, because it mishandles a horizontal line traced there and back.
Make, Merge, the bucket and Live Paint Selection all use it;
interior_point moves to vectorcraft-pathops with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the vertical type from #145 (same data, commands and tools).
- Kinsoku (the strict set, horizontal Japanese too): no line starts with a
closing bracket, 、。, a middle dot, colon, !?, the long vowel mark,
iteration marks or small kana; no line ends with an opening bracket.
Hyphenation breaks obey it too.
- Tate-chu-yoko: a run of two or three half-width digits (10月, 第100回)
stands upright across the column as one block one em long, squeezed to
the em when wider; longer numbers stay on their side.
- Upright or on its side by Unicode's Vertical_Orientation: CJK and
symbols upright, marks that need a vertical form on their side when the
font has none; upright glyphs advance at least one em, centred, and turn
about the ideographic em box centre so they sit on the column's centre
line. Point type keeps its anchor on the first column's centre line.
- `vrt2` is no longer requested: its glyphs are already on their side, so
with the layout turning Latin and digits too they came out upside down
(and tate-chu-yoko blocks broke) in fonts that have it, e.g. Hiragino.
- The line→text mapping is one affine (`TextLayout::line_xf`, an exact
quarter turn plus the point-type offset); `logical_point` and
`physical_point` use it. Pixel snapping skips vertical type.
- Tests: kinsoku in both directions, tate-chu-yoko blocks, upright vs
sideways, anchor on the centre line, arrows along columns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Documents made elsewhere often name a font differently from the family
name VectorCraft lists: a localized family name (ヒラギノ角ゴシック), a
legacy family/style pair (Hiragino Sans + W3) or a PostScript name
(HiraginoSans-W3). FontDb now indexes every name in a face's name table
and resolves a request to the right face, telling the caller whether it
matched exactly, by another name, by substitution or not at all
(FontMatch).
- text: FaceKeys/aliases, FontDb::resolve, canonical, find_postscript;
fix a race where a face loaded by another thread was reported missing.
- engine: text.fonts reports status, the resolved face and missing
glyphs; Replace Font resolves the same way.
- render: substituted-font highlighting uses resolve, so a font found
by another name is no longer shown as missing.
- Find Font notes how each font was found.
- Preferences › Type › Include Fonts of Other Design Apps' Folders
(macOS, on by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Typing with an input method (the macOS Japanese IME and the like) used to
insert the raw keys (romaji came in as ASCII): egui's Ime events weren't
handled.
- Tools gain `ime_preedit` / `composing` / `ime_caret`; the Type tool lays
the marked text out in place inside its typing session, underlined (the
clause being converted thicker), and commits it through `text_input`.
Character ranges from the IME convert to byte ranges in one place. A
cancelled composition leaves no empty undo step; an empty clear with
nothing marked never deletes the selection.
- The UI sends Text and Ime events to the tool in order, sends IMEOutput
every frame while text is edited (what lets egui-winit enable the IME
and place its candidate window at the caret, or the converting clause),
and holds back keys, Enter/Escape, clipboard, single-key shortcuts and
menu commands (Undo, Cut, Select All… also from the native menu) while
composing. A click, a tool switch or a style change ends the
composition with the marked text kept as typed; on macOS the IME is
told to discard it (NSTextInputContext.discardMarkedText) so it doesn't
come back in the next input.
- Undo during a typing session also ends the Type tool's session, so its
caret and marked text follow the document.
- Tests: tools (char → byte ranges, underlines and candidate position),
engine (compose → commit is one step, cancel leaves no step, a click
commits, Undo mid-composition is safe), ui-egui (synthetic Ime events:
compose, commit, ⌘Z held back, IME output, click and app switch).
Checked by hand on macOS 27 with the Japanese IME (romaji input, convert,
commit, cancel, Undo/Redo after commit, click away, Latin mode, app
switch). Not checked: Windows and Linux IMEs, the web build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft ▸ Language gains Čeština (`app.language {lang: "cs"}`,
persisted as "cs"). `Language::tr` now picks a table per language.
The Czech table (crates/ui-egui/src/i18n/czech.rs) translates every
menu title, submenu, item and header in the menu tree, plus the labels
toggling items switch to (Show/Hide Guides, Lock/Unlock Grid, Outline/
Preview, Edit Contents/Edit Envelope…). It was written clean-room from the
meaning of the English labels: commands in the infinitive, menus as nouns.
Left as-is on purpose: the product name, language names, OpenType, the
built-in workspace names and the perspective grid preset names.
Tests:
- every Czech (and Japanese) entry is a menu label, toggled labels included;
- Czech covers every menu label except fonts, sizes, plug-in names and
an explicit KEEP_AS_IS list;
- ellipses match their source label, entries are unique;
- the Language menu lists every language; `cs` validates and persists;
- each UI font family's own first font has the Czech letters and
punctuation (no system fonts needed).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The appended Interface localization section moves into the roadmap's structure: a
Shipped so far entry, the Type advanced row (45%, CJK composition left), the gap list,
the inventories (16 stubbed menu items; Touch Type the only missing tool) and totals
recomputed from the parity table (75.3%, 211–332 h to feature parity); README Status
follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The M8 row is done with what the fidelity pass delivered and what is left; the
Symbols/blends/envelopes/perspective parity row moves from 75% to 88%; feature
parity ~75%; Shipped so far and the README status follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
theironchef
bflatastic
Hiroshi Inukai
WildfootW
Fahri Meral
Brandon Thomas
imachus
Petr Leo Compel
midasdf