stroke.widthPoint.set and .copy read `index` with `as_u64() as usize`:
a malformed index ("bad", -1, 1.5) was taken as no index, so set added a
new point instead of failing, and a huge one wrapped round on wasm32.
They now read it through point_indices, as remove does since #1079:
anything but an index of an existing point is "no such width point".
A null index is still no index (set adds a point).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
point_indices moves from freeform.rs to the cmd param helpers so
stroke.widthPoint.remove parses `index` and `indices` with it, and a
malformed entry reports the translated "no such width point".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Align and Distribute Spacing move a selected compound path or group as
one object, and they found the key object only when its own id was
among the objects they move. When the key was inside a compound path
or a selected group, aligning to the key moved that compound path or
group like any other object, and the key moved with it. In that case,
Distribute Spacing with a spacing held the first object still instead
of the key.
The key object can end up inside a selected group or a compound path.
Dragging its row into a group in the Layers panel (layer.move) keeps
the selection and the key. A Selection-tool Shift-click on that group,
when it is unselected and directly in a layer, then adds it to the
selection (select.toggle) and keeps the key. Other ways of adding the
group keep the key as well: a Shift-click in the Layers panel's
selection column or on the group's target circle, a Group Selection
click that hits the key itself, select.add, and select.anchors or
select.anchorsMany in add or toggle mode. In isolation mode, a
Selection-tool click on one of several selected objects in the
isolated group makes that object the key. In an isolated compound
path, the same click on the outline of a selected member makes that
member the key.
Align to the key object and Distribute Spacing with a spacing now keep
in place the selected object that is the key or contains it. Both
commands look for that object among the key and its ancestors, so a
group around the key's group also stays in place. Aligning to the key
still lines the others up with the key's own bounds.
Docs: docs/target-app-parity.md.
parse_freeform and paint.freeform.addLine share point_indices, which also
keeps addLine from wrapping a huge index round on 32-bit targets (wasm).
The new messages are in the catalogs that translate every message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Text Wrap and the variable bindings share checked_ids_or_selection in
cmd/mod.rs instead of each keeping its own copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
These Object commands edited the document even when nothing changed, so
the call recorded an undo step, emptied Redo and marked the document
modified:
- object.align, object.distributeSpacing and object.distribute (three
or more objects) when no object moves. With one object selected,
Object › Align aligns it to its own bounds, so it recorded a step
every time. Calls on objects that were already aligned or evenly
spaced also recorded a step, including objects that an earlier Align
or Distribute left a rounding error away from the position the next
call computes.
- Move, Rotate, Scale, Shear, Transform and Nudge by an identity
transform without a copy, Transform Again after one, Set Bounds with
the current position and size, and a Selection tool drag that ends
where it started.
- Nudge by 0 with anchors direct-selected or with only ruler guides
selected, and Transform with nothing selected or with ids that name
no object, with or without a copy.
- Bring to Front and Bring Forward on objects already in front, Send to
Back and Send Backward on objects already at the back, and Send to
Current Layer on objects already on top of the current layer.
- Ungroup, Release Compound Path and Release Clipping Mask with none of
their objects selected, and Expand Shape with no live shape selected.
- Lock with every selected object already locked, Hide with every one
already hidden, Unlock All with nothing locked and Show All with
nothing hidden.
- object.setProps with the values the objects already have, or with no
object.
- object.setLiveShape with the values the shape already has: a
polygon's sides, angle, radius or equal sides, or a side length that
gives exactly its current radius; an ellipse's pie, including Invert
Pie on a whole ellipse; and a corner radius or kind that the corners
already have.
These commands now return without editing the document, and Align and
Distribute count a move of 1e-9 pt or less on both axes as none. Such a
call records no undo step, keeps the step to redo and leaves the
document unmodified. In these cases Ungroup no longer resets the
selection, and Release Compound Path, Unlock All and Show All no longer
empty it. A Transform with a copy of no object keeps the selection.
Lock and Hide still deselect the objects. A Nudge by 0 no longer
expands a live shape whose anchors are direct-selected. The replies
have the same form as before. An identity transform still sets what
Transform Again repeats. The journal still records each call, so the
Actions panel records it as before.
When every value given to Set Bounds is the current one, it now applies
the identity transform instead of the transform computed from those
values, which can differ from the identity by a rounding error on a
rotated object or with Use Preview Bounds.
When a drag comes back to its start, the identity preview no longer
edits the document. Session::preview now advances the revision when it
undoes the previous preview, so views redraw that drag.
The undo and redo row of docs/mcp.md now notes that many calls that
change nothing record no undo step, so undo after one undoes the step
before it.
A character attribute (Character panel menu with the East Asian options;
`text.setFormat` / `text.setRangeStyle {proportionalMetrics}`), saved only
when on. In horizontal type it applies `palt`; vertical type sets as before
until the vertical shaping change (`vpal`) follows.
Line-end Punctuation Half Width takes nothing more off the punctuation
`palt` re-spaced (the flush opening bracket, consecutive punctuation, the
line-end half width): the segment is shaped once more without `palt`, and
the glyphs whose advance differs are marked. Punctuation the font leaves
full width is trimmed as before. SVG writes `"palt" 1` with the
character's other features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After scaling 12 pt type 2x, the Character panel still showed 12 pt and
typing 10 pt gave 20 pt type. Character controls and text commands now
work in document points: the size, leading and baseline shift shown and
set are the stored ones times the text's scale along its em height, and
horizontal scale includes the ratio of the transformed em axes. Rotation,
reflection and shear stay in the transform, so text remains editable.
Groups' text counts, keyboard increments use the same units, Shrink
Text to Fit works in document tenths, and a collapsed transform rejects
dimensional edits without touching the document.
text.getRange takes effective: true for the document-space values.
Choosing a fill or stroke (Color panel, Swatches, the proxies) while the
Type tool had a few characters selected painted every run of the type
object. As in Illustrator, it now goes to the selected characters only:
the runs are split at the selection's ends and the paint is placed on
the runs in between, as one undo step; a stroke gets a 1 pt weight
where it had none. With only a caret, or with explicit ids or an item,
paint.setFill/setStroke behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A .ai in PostScript form went only to the PostScript interpreter, which
stopped on the first operator its missing prolog would define
(`Adobe_packedarray`, `Lb`, `Np`): files from Rhino and other CAD apps name
the procsets without including them.
- Such a program is its own editing data: when it has layers
(`%AI5_BeginLayer`) and no private data, the editing-data reader reads it,
compared with the page when the program runs, from the layers alone when
it can't be run. If the layers can't be read either, the error says why.
- The reader takes the legacy ten-operand `Lb`, ignores flatness `i`, and
uses the bounding box as the page when nothing else says where it is.
- Tests on synthetic files; fuzz fixture and hostile-program layers added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
# docs/file-format-parity.md
# docs/gaps.md
- Guides on a hidden or locked layer leave the selection (Selection::prune,
run after every edit and selection change), their Layers rows neither
select nor drag them, and guide.move / guide.remove / guide.setLayer
refuse them; guide.setLayer refuses a locked target layer, as dragged
rows are refused there.
- A new guide goes where new art goes (the current layer, else the top
shown and unlocked one; refused when there is none), so it never lands
on a hidden layer and vanishes.
- Layer commands keep guides with their layers: Duplicate (and Alt-drag
copies of rows) copy a layer's guides onto the copy, Merge Selected and
Flatten Artwork put the merged layers' guides on the merged layer and
Flatten discards a hidden layer's. One shared doc predicate for "the
layer a guide is on"; the deleted-layer cleanup moves into the doc.
- Tests: engine tests for the above and their undo, a doc check that an
old guide reads with no layer and none is written, and a headless
Layers panel test of guide rows (select, drag to another layer, locked).
- Translations for the new message; docs and a ROADMAP progress line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guide rows in the Layers panel drag (the selected guides when the row is
one of them) onto any row of another layer, which lights up, and go to
that layer in one undo step (guide.setLayer takes indexes). Guides on no
layer, from files saved before guides had layers, go on the top visible,
unlocked layer when a document opens or is reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
A ruler guide goes on the current layer (guide.add {layer}), shows,
hides, locks and is deleted with its layer, is listed in the Layers panel
as a row that selects it, and moves to another layer (guide.setLayer).
Guides on a hidden layer neither show nor snap; those on a locked layer
can't be picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
fill_contains promised to close open subpaths (as their fill does) but
counted kurbo's winding, which leaves the closing edge out: a point beside
it read as outside. An open path (an anchor deleted from a closed one) lost
its fill clicks on that side, and a reflection moved the edge across, so it
looked like Reflect broke selection. Open subpaths are now closed by a
straight line back to their start before the winding is counted; closed
paths are borrowed as they are.
Tests: the open path from the report, on both sides and even-odd; reflected
shapes, imported SVG hearts, a selected shape dragged by its fill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Shift-click on a guide adds it to the selected art (guide.select
toggle keeps the art), and Shift-adding or -removing art keeps the
selected guides; a new selection still clears them. With both selected,
Delete deletes the art and the guides in one undo step (not when ids are
given).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
Cursor::precise listed every Pen state but PenJoin (added later, #794), so with Use Precise
Cursors on the Pen still showed its join badge over another open path's end.
PenJoin is a crosshair too under the preference.
The Pen join test now also checks the pointer over the other path's end is the crosshair with
the preference on (and PenJoin with it off, as before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
Reversal read the midpoints after Gradient::reverse had reordered the stops, so each stop
took the wrong segment's midpoint: red-to-blue with its midpoint at 20% reversed to a 50%
midpoint instead of 80%, moving the transition.
Gradient::reverse now mirrors each segment's midpoint with it, so a reversed gradient is the
same ramp the other way round; paint.editGradient's own (wrong) pass is gone, and the SVG
importer's reflect spread, which had a correct copy of the same mirroring, uses it too.
Tests: two- and three-stop gradients with off-centre midpoints sample the same reversed (t vs
1 - t) and come back after two reversals; paint.editGradient reverse turns a 0.2 midpoint into
0.8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
add_text passed `color` to text.create only, and text.createInPath built its own character
style without a colour, so type on a path and path-based area type took the current fill.
text.createInPath now uses the same new-type style as text.create (size, font, style, color,
else the current fill), and add_text sends `color` on both routes.
The MCP test draws a blue rectangle (the current fill), turns it into on-path and area type
with color #ff0000, and reads red back through inspect_document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
With every layer hidden or locked, the insertion layer fell back to the top layer anyway, so
drawing a shape, typing, pasting, making a graph, a flare, a grid, trim marks or a symbol put
the art on a hidden or locked layer: invisible, or unselectable by Select All. Illustrator
refuses to draw on a locked or hidden target layer (public forum answers, e.g.
https://community.adobe.com/t5/illustrator/can-t-draw-a-new-object-in-my-document/m-p/11107182).
DocState::target_parent is insertion_parent for new art, failing with "the target layer is
locked or hidden" when it would be a layer that isn't editable; those creation paths use it.
Another layer that is shown and unlocked still takes the art, as before. The message is in the
de, es, fr, it, ja, ru and uk catalogs. File > Place is left as it is (another branch reworks
it).
The test hides, then locks, the only layer: an ellipse, a polar grid, text and a paste each
fail with the message and leave the document unchanged; a new layer then takes a rectangle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
Character and paragraph styles checked a new attribute against the keys its base style
serializes, and the JSON leaves out Auto leading and kerning, no mojikumi and other defaults.
So charStyle.new / setAttrs refused leading or kerning, paraStyle.new refused mojikumi, and a
style captured from text with explicit leading failed to apply to Auto-leading text, to
duplicate or to come back out of a library.
The check now also accepts every field name the style type deserializes (read from serde's
derive), still refusing unknown keys and the file-only justify_auto.
The test creates and edits styles with kerning, leading, small caps, mojikumi and direction,
applies a captured leading style to fresh text with and without Clear Overrides, duplicates it,
uses it from a library, and checks `nope` and `justify_auto` are still refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
Asset Export, File › Export, Save for Web and Object › Rasterize drew
each shape with its own smoothed edge, so where two shapes met edge to
edge (Divide, Shape Builder, abutting art) both half-covered the pixels
on the line and the background showed through as a thin ghost border.
With Art Optimized (the default) these now supersample, as the option's
name in Illustrator says: the art is drawn with hard edges at four times
the size (three or two times for large images, within a 40-megapixel
budget and the renderer's 65,535-pixel side) and each block averaged
into one pixel. Pixels shared by two shapes are fully owned by one or
the other at the finer size, so no seam is left, and the outer edges
are still smooth. The canvas keeps shape-by-shape smoothing for speed;
None and Type Optimized are unchanged.
RenderOptions::supersample turns it on (exports and Rasterize set it).
A render test checks two triangles sharing a diagonal: a seam with
shape-by-shape smoothing, none supersampled, and the factor's limits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Same checks in a third of the code; the corners destructure into the
four points instead of being indexed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR added `checked_anchor_from_json` next to the lenient
`anchor_from_json` and dropped path.rs's import of the latter, which
`path.appendAnchor` still called, so the engine didn't compile.
`anchor_from_json` is now the strict parser itself (handles through
`finite_numbers`), used by path.create, path.setAnchors and
path.appendAnchor alike: the Pen's appended anchor with a malformed
handle fails too instead of losing the handle. Tests: a non-boolean
`closed` and a malformed appended handle change nothing. rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`text.reshapeArea` read its anchors with the lenient `parse_refs`, so a
malformed reference among good ones moved only the good ones. It now
uses `checked_refs` as well, and `parse_refs` (no other user) goes.
Test: a mixed list fails without moving anything.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A rejected Stroke panel edit with nothing selected leaves the next
object's stroke as it was; an accepted one sets its weight and dashes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `finite_numbers::<N>` (cmd/mod.rs) reads an array of exactly N finite
numbers, nothing dropped or padded; `rect` uses it, and the rect cut,
Free Distort and anchor handles reuse it in the PRs stacked on this one.
- `at` is parsed once (`at_param`) instead of point_param plus a second
shape check that indexed the params; `at: null` means no position, as
null does for the other optional params, and gets a test.
- rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Eight raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::brushstrokes), under a new Effect › Brush
Strokes submenu between Blur and Distort in the Raster Effects section:
- Accented Edges (edgeWidth pt 1..14, default 2; edgeBrightness 0..50,
38; smoothness 1..15, 5): the edges of the softened object painted
towards white chalk at high brightness or black ink at low brightness;
Smoothness also leaves the faint edges out. The shape stays as it was.
- Angled Strokes (directionBalance 0..100, 50; strokeLength pt 3..50, 15;
sharpness 0..10, 3): light areas in right diagonal strokes, dark areas
in left diagonal ones; 0 makes every stroke a left diagonal, 100 every
stroke a right diagonal. Sharpness brings detail and bristles back.
- Crosshatch (strokeLength pt 3..50, 9; sharpness 0..20, 6; strength
1..3, 1): the detail kept under pencil hatching along both diagonals,
Strength passes of it, the edges roughened.
- Dark Strokes (balance 0..10, 5; blackIntensity 0..10, 6;
whiteIntensity 0..10, 2): short strokes towards black in the dark
areas, long strokes towards white in the light areas.
- Ink Outlines (strokeLength pt 1..50, 4; darkIntensity 0..50, 20;
lightIntensity 0..50, 10): black outlines over the edges, ink hatching
in the shadows, shadows darkened and highlights lightened.
- Spatter (sprayRadius pt 0..25, 10; smoothness 1..15, 5): each pixel
shifted by noise up to 0.4 x the radius; Smoothness makes the grains
larger and smoother.
- Sprayed Strokes (strokeLength pt 0..20, 12; sprayRadius pt 0..25, 7;
strokeDirection Right Diagonal, Horizontal, Left Diagonal or Vertical):
strokes along the direction, scattered by up to 0.3 x the radius.
- Sumi-e (strokeWidth pt 3..15, 10; strokePressure 0..15, 2; contrast
0..40, 16): wet strokes, ink bleeding from the darks along paper
fibres, more ink with pressure and an S-curve contrast for rich blacks.
It works in value only: hues and saturation stay, and so does the
object's shape (no fringe in the transparency).
A stroke averages the colour along a segment through the pixel (16
samples at most, the art softened first when they lie more than a pixel
apart); strokes lie in rows around the object's centre, each row
starting at random and each stroke shifted along itself, with streaked
noise for the bristles. Everything is in document space, so the effects
look the same at any zoom or resolution, move with the object and draw
the same every time; outsets and reaches are exact. On a 2000 x 2000
raster in release the slowest settings take 0.3-2.0 s (Crosshatch at
50 pt with 3 passes the most).
Shared helpers instead of copies: edges::sobel (Glowing Edges now uses
it, unchanged), distort::displace and texture::Tones are pub(super).
Catalogue rows with parameter docs, menu entries, Sprayed Strokes'
direction dropdown, translations (de, es, fr, it, ja, ru, uk, zh-hans,
zh-hant; menu labels in cs and pt-br), tests (parameters and clamping,
outsets and reaches, each filter and option showing, chalk and ink on
the edges only, shadows and rich blacks, Sumi-e keeping the shape and
hues, hatching keeping the tone, strokes smearing along their direction,
Spatter's radius, resolution and move invariance, canvas, multithreaded,
PDF and SVG, the command sweep with junk parameters, the menu) and
ROADMAP.
Behaviour from public documentation only:
https://helpx.adobe.com/photoshop-elements/using/brush-stroke-filters.htmlhttps://www.computerhope.com/jargon/p/photoshop-sprayed-strokes.htm
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A visibility variable could hide an object but never show it again: dataset
application, capture and binding refused any object that wasn't visible
(`is_editable`), so a row that hid an object left it hidden for good and a
capture after hiding it in the Layers panel didn't record it. They now use
`Document::variable_target`, which ignores the object's own visibility
(locked art and art on hidden or locked layers are still skipped).
- Renaming a variable renamed the active dataset when the two shared a name,
leaving it pointing at a dataset that doesn't exist.
- `variable.delete` and `dataset.delete` without `names` act on the
highlighted variable and the active dataset, so Window > Variables > Delete
Variable / Delete Data Set no longer fail with "missing `names`".
- `ids` is checked like other commands' explicit targets (a non-list no longer
falls back to the selection, bad ids are errors), names are trimmed and
capped at 255 characters, and the bind checks are shared by Bind and Make
Dynamic.
- Make Dynamic's fallback name no longer becomes " 2" for unnamed art.
- `dataset.list` reads the art once for every row's drift check, and
`Variables::prune` looks names up in a set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Select Bound Object ran variable.unbind on the selection, so choosing it silently
removed the bindings; Delete Variable and Delete Data Set deleted every row. Now
the panel keeps a highlighted variable row (a click highlights and selects what
it drives, as the reference panel does): Select Bound Object selects what the
highlighted variable drives via select.set, Delete Variable deletes only it, and
Delete Data Set deletes only the current set. Variable Options and Rename Data
Set open their dialogs preselected with the highlighted variable / active set
(the double-click used to invoke variable.rename with a bare name, which only
errored). Unbind enables only over a bound selection; Make Text Dynamic only for
exactly one type object.
The highlight is per-document session state with its own command
(variable.highlight, no undo step, like layer.highlight): rename carries it,
delete clears it when stale. New engine tests (18) and panel tests cover the
reviewer's regression case, verified to fail on the old wiring.
bflatastic
Nigel Ihza Firdausy
dotCooCoo
MarekSpodBiedry
imachus
lollinoo
redrun6767
mateususa
alpha-rock
Fahri Meral