The Type tool passed `y + 12` to `text.create` for a dragged frame, and
`text.create` puts the frame's top-left at (x, y), so every frame landed
12 pt below the marquee the user dragged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A press only started a selection inside the text being edited; on other
type it waited for the release, which placed the caret at the press and
ignored the drag, so the first drag across a word never selected it.
A press on type now starts editing it there (the same code a click used
on release), so the drag selects at once; a plain click still just
places the caret.
Fixes#245.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing with Shift on an object that was already selected toggled it
out of the selection at once and went idle, so the drag that followed
moved nothing. The toggle now waits for the release: a Shift-click
still takes the object out of the selection, while a Shift-drag moves
the selection constrained, as it already did for unselected objects
and when Shift was pressed mid-drag.
Fixes#224.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U9TrG4w49oSRYbP3cqxA3D
The Live Paint Bucket now fills areas enclosed by any paths. Crossing
lines enclose faces it can fill, a line across a shape splits that shape's
face in two, and an area enclosed by paths becomes a face even when nothing
fills it (it starts unfilled). Edges are the paths cut wherever another path
meets them, keeping their stroke, so Shift-click paints each piece. Closed
shapes give the same faces as before.
Root cause: Live Paint built its faces from the Pathfinder regions, which
divide the filled areas of closed shapes. An open path counted only as the
area it would fill if closed, which for a straight line is nothing, so lines
divided nothing and the bucket found no face to fill. A new planar map in
vectorcraft-pathops (live_paint) sweeps every path as an edge: an open path
goes in traced there and back, with crossing counts that never cancel; faces
are walked on the resulting graph (holes included), and their fills and the
edges' sources are found geometrically. The sweep runs in an exactly sheared
frame, because it mishandles a horizontal line traced there and back.
Make, Merge, the bucket and Live Paint Selection all use it;
interior_point moves to vectorcraft-pathops with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the vertical type from #145 (same data, commands and tools).
- Kinsoku (the strict set, horizontal Japanese too): no line starts with a
closing bracket, 、。, a middle dot, colon, !?, the long vowel mark,
iteration marks or small kana; no line ends with an opening bracket.
Hyphenation breaks obey it too.
- Tate-chu-yoko: a run of two or three half-width digits (10月, 第100回)
stands upright across the column as one block one em long, squeezed to
the em when wider; longer numbers stay on their side.
- Upright or on its side by Unicode's Vertical_Orientation: CJK and
symbols upright, marks that need a vertical form on their side when the
font has none; upright glyphs advance at least one em, centred, and turn
about the ideographic em box centre so they sit on the column's centre
line. Point type keeps its anchor on the first column's centre line.
- `vrt2` is no longer requested: its glyphs are already on their side, so
with the layout turning Latin and digits too they came out upside down
(and tate-chu-yoko blocks broke) in fonts that have it, e.g. Hiragino.
- The line→text mapping is one affine (`TextLayout::line_xf`, an exact
quarter turn plus the point-type offset); `logical_point` and
`physical_point` use it. Pixel snapping skips vertical type.
- Tests: kinsoku in both directions, tate-chu-yoko blocks, upright vs
sideways, anchor on the centre line, arrows along columns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Typing with an input method (the macOS Japanese IME and the like) used to
insert the raw keys (romaji came in as ASCII): egui's Ime events weren't
handled.
- Tools gain `ime_preedit` / `composing` / `ime_caret`; the Type tool lays
the marked text out in place inside its typing session, underlined (the
clause being converted thicker), and commits it through `text_input`.
Character ranges from the IME convert to byte ranges in one place. A
cancelled composition leaves no empty undo step; an empty clear with
nothing marked never deletes the selection.
- The UI sends Text and Ime events to the tool in order, sends IMEOutput
every frame while text is edited (what lets egui-winit enable the IME
and place its candidate window at the caret, or the converting clause),
and holds back keys, Enter/Escape, clipboard, single-key shortcuts and
menu commands (Undo, Cut, Select All… also from the native menu) while
composing. A click, a tool switch or a style change ends the
composition with the marked text kept as typed; on macOS the IME is
told to discard it (NSTextInputContext.discardMarkedText) so it doesn't
come back in the next input.
- Undo during a typing session also ends the Type tool's session, so its
caret and marked text follow the document.
- Tests: tools (char → byte ranges, underlines and candidate position),
engine (compose → commit is one step, cancel leaves no step, a click
commits, Undo mid-composition is safe), ui-egui (synthetic Ime events:
compose, commit, ⌘Z held back, IME output, click and app switch).
Checked by hand on macOS 27 with the Japanese IME (romaji input, convert,
commit, cancel, Undo/Redo after commit, click away, Latin mode, app
switch). Not checked: Windows and Linux IMEs, the web build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Edit Contents: while an envelope's contents are edited, clicks hit the
content where it sits undistorted and the Selection tool selects it; the
menu item reads Edit Envelope then. No default shortcut: the reference
app's (Shift+Cmd+V) is Paste in Place here.
- A selected envelope shows its mesh (a warp's surface grid, a mesh's own,
a top object's outline) instead of its content's outlines.
- Mesh envelope points get bezier handles (append-only; none stored is the
smooth Catmull-Rom mesh, which the first handle edit fills in exactly
along the grid lines). setMeshPoint takes `handle`; object.mesh.movePoint,
addLine and deletePoint edit mesh envelopes too. The Mesh tool and Direct
Selection drag points and the clicked point's handles (shared MeshEdit);
the Mesh tool adds rows and columns inside mesh envelopes. Reset with
Mesh keeps the shape along the grid with handles; Release returns the
exact mesh.
- Control bar: Edit Envelope / Edit Contents, warp style, orientation,
bend and distortions or mesh rows and columns, Reset, Envelope Options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Grid tool's left and right ground-level points move the whole
grid; the left and right extents are separate (extentRight; Alt drags both,
Shift goes by whole cells); a cell size widget sits up the line where the planes
meet; Shift keeps a vanishing point on the horizon and the ground points and
origin on one axis. The Plane Switching Widget stays put in a corner of the
document window (ViewInfo/ToolContext carry the window as a ScreenFrame), takes
its clicks with any tool while the grid shows (the Perspective Selection tool
too while it's hidden), and 1-4 pick the left, horizontal, right and no plane.
Double-clicking the Perspective Grid tool opens Perspective Grid Options
(show the widget, its corner; perspective.widget.options, kept with the
preferences).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type and symbol instances attached to a plane keep their art and carry a projection
(Node.perspective.projection, append-only); the canvas and every export draw their outlines
through it (reshape/bake), so they are foreshortened and stay type and symbol instances. Bounds,
hit testing and transforms follow the projection. Object › Perspective › Edit Text
(perspective.editText, or double-clicking with the Perspective Selection tool) shows the type flat
where it is drawn in isolation mode; exiting isolation projects it again. Release with
Perspective keeps their look. Copies, pastes, duplicates and Selection-tool moves keep the
attachment (the art moves as dragged). Flare, spiral and polar grid draw on the active plane, and
so do the click-to-size shape dialogs (perspective.draw `at`: sizes in plane units).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Images distort as a raster mesh warp: cut by Fidelity into triangles,
each a clipped image under the affine map of its corners (pieces overlap
slightly, no seams; the renderer paints them without clip layers; SVG
writes the pixels once and <use>s them).
- Symbol instances distort as their symbol's art (the renderer's cache
follows edits to the symbol).
- Distort Appearance bakes strokes (filled outlines) and geometry effects
before bending; Distort Linear Gradients bends linear gradients; Distort
Pattern Fills bends the tiles. Opacity masks of the content bend too.
- Bug fix: a rotated, sheared or reflected warp envelope re-warped along
the page axes. Envelopes now keep their own frame (append-only model
field), so the warp turns with the art; move and scale keep it square.
- Live evaluation shares one set of hooks (vectorcraft_doc::live::Hooks,
vectorcraft_effects::{expand_live, expanded_live_group,
expand_live_deep}) between the canvas, Expand and every exporter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A compound path's stroke lives on the compound: the tool edits it through
any member, and stroke.widthPoint.* / stroke.widthProfile.set given a member
edit the compound's profile.
- Width points show on every subpath the stroke runs along (not just the
first) for the hovered and the selected stroke.
- Cursors: the Width tool's own glyphs off a stroke, over a stroke (a drag
adds a point) and over a width point or handle (a drag moves or widens it).
- Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Holding the brush still keeps Twirl, Pucker and Bloat applying, scaled by the
time held: a new Tool::tick (time supplied by the host: canvas frames, or
`holdMs` on ui.pointer / pointer_gesture events) repeats the last point every
0.1 s, one more dab there. Liquify never touches graphs, meshes, type, symbols,
images, or envelopes, repeats and blends with their contents, nor guides in
selection mode; those under the brush come back in `skipped` with a `warning`
that the status bar shows (UiRequest::Status). A drag applies only the dabs
each new sample adds (the stroke's state is kept between previews), giving the
same result as the whole stroke, so journal replay still reproduces it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid gains Show/Hide Rulers, Snap to Grid (on by default),
Lock/Unlock Grid and Lock Station Point, with flipping labels and checkmarks (and
Show/Hide Grid's label). Lock Grid stops the grid widgets from dragging; Lock
Station Point swings the other vanishing point around the station point; Snap to
Grid lands drawn corners and moved edges on gridlines within a quarter cell
(perspective.draw/move take snap?); Show Rulers draws a ruler up the true height
line in the grid's units. Gridlines draw in the Define Grid colours and opacity.
New commands perspective.grid.lock/lockStation/snap/rulers (view state).
Existing tests that measure exact perspective moves (two in tests_distort.rs,
the persp_session helper of tests_persp_select.rs) turn snapping off first (it is on by
default and would move their exact corners onto gridlines).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid keeps per-plane offsets (leftOffset, rightOffset, groundOffset). Each plane has a widget
(a diamond in its colour) that the Perspective Grid and Perspective Selection tools drag: plain
moves the plane, Shift moves the objects on it too, Alt copies them (perspective.plane.move).
Double-clicking a widget, or ui.perspectivePlane, opens the plane's options dialog (location; Do
Not Move / Move All Objects / Copy All Objects). Object › Perspective › Move Plane to Match Object
(perspective.plane.matchObject). New objects attach where the plane is. Grid edits leave
attached art in place as the reference app does; perspective.grid.set {reproject: true} moves it
with the grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Pins show as soon as the tool has art selected: automatic ones at the
centre and the middle of each limb's end (at least three), until pins are
placed. They stay across tool switches while the selection is unchanged and
a new selection starts afresh.
- The pins live in the document (Document.puppet, never saved) with the rest
shape they started from: every warp starts from it, so warps don't stack and
dragging a pin back restores the original; Undo/Redo take the pins back with
the art. Adding and deleting pins are undo steps too.
- object.puppetWarp gains rest: true (the tool's pins); the new query
object.puppetWarp.pins reads them. A click off the mesh adds nothing and
says so (not-allowed cursor, canvas label); the command refuses such pins.
- The mesh grid covers the expanded art, so tiny art with a wide Expand no
longer allocates millions of cells.
- Tests on groups, compound paths and open strokes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selected blend shows its spine. Direct Selection drags spine points
and handles, the Pen tool adds and deletes points on a selected
blend's spine (object.blend.spine.moveAnchor/addAnchor/removeAnchor).
The straight spine becomes a path on the first edit, its points pinned
to the key objects (append-only BlendSpec.key_anchors): moving a key
moves its end of the spine and the other way round; spines from older
files and Replace Spine still spread the keys evenly. Direct and Group
Selection pick blend keys on the canvas, edits redraw the blend live,
and Release leaves the spine as a path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Blend Options is a dedicated dialog (Spacing dropdown with its value,
Align to Page / Align to Path buttons, live preview) opened on the
selected blend's own options, so OK no longer turns Smooth Color into
5 steps; with nothing selected it sets what new blends start with
(object.blend.info reads them). The Blend tool blends from clicked
anchor points (blend spec `starts`), adds keys to an existing blend
instead of nesting it, opens Blend Options on double-click, Alt-click
and its toolbar button, and has its own cursors and hint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Selection tool shows the selection's bounding box in perspective; its handles
scale in plane space (perspective.transform; Shift proportional, Alt from the centre). Alt-drag
moves copies that stay attached, pressing 5 while dragging moves along the plane's normal
(ToolKey::Digit, delivered by the canvas and MCP press_key), and the arrow keys nudge in
perspective (perspective.nudge). Transform Again repeats the last perspective move or scale in
plane space. Attachments (plane and depth) now live on the objects (Node.perspective), so copies,
duplicates and pastes keep them; grids from older files hand theirs over. Homography moves to
vectorcraft-geom. Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid > One/Two/Three Point Perspective list the built-in views
([1P/2P/3P-Normal View], plus Low and High views generated in code) and the saved
presets of each type; Save Grid as Preset... and Define Grid's Preset menu and Save
Preset... save the fields. Edit > Perspective Grid Presets... (previously a
mislabelled reset to the two-point grid) manages them: New, Edit, Delete, Import,
Export (.vcperspective), stored with the preferences. New commands
perspective.presets.list/save/delete/export/import; perspective.grid.preset takes
a preset name. Preset import is fuzzed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a Liquify tool opens its Tool Options (dialog liquifyOptions):
the shared Global Brush Dimensions (Width, Height, Angle, Intensity, Use
Pressure Pen), the tool's options (Detail, Simplify with its checkbox, Twirl
Rate, Complexity, Brush Affects, Horizontal/Vertical) and Show Brush Size.
The canvas captures pen pressure from pen/touch force, ui.pointer and MCP
pointer events take `pressure`, and object.liquify takes [x, y, pressure].
Fixes: LiquifyParams::to_json now sends affectAnchors/In/Out; Alt-drag sizes
the brush from its current size (Shift keeps proportions) instead of
collapsing it. Hint-bar text for the seven tools. Registers the MCP Liquify
tests file added in M8.2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Alt-dragging near (not on) a selected pin turns the art around it; the pin
keeps that turn through later warps. arap::Pin gains an angle constraint and
object.puppetWarp takes angles: [deg|null...].
- Shift-click adds pins to the selection or takes them out; dragging a pin
moves every selected pin. Select All Pins selects them all (it used to
deselect). Alt-click no longer deletes a pin; Delete removes the selection.
- Control bar: Expand (0 allowed), Show Mesh (on by default), Select All
Pins. Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid > Define Grid... opens a dedicated `perspectiveGrid` dialog
(ui.perspectiveGridDialog) prefilled from the current grid instead of a generic
form with fixed defaults that forced kind 2. The grid model gains (append-only)
name, viewing angle (the station point), units, scale, plane colours and opacity;
grids with a viewing angle foreshorten each axis as a true camera. New commands:
perspective.grid.get (read-only) and perspective.grid.define (one undo step,
only changed fields apply).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Width and Puppet Warp tools now claim Delete and Backspace while they
have width points or pins selected, so the shortcut routing (desktop and MCP
press_key) removes those instead of clearing the artwork. With nothing of the
tool's selected the keys still clear the selected objects. Headless Backspace
clears the selection like the desktop app does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tool keeps its options (a table in vectorcraft_tools::settings) when another
tool is chosen, across document switches, and in the saved preferences
(Prefs::tool_settings). The 7 Liquify tools share one set of Global Brush
Dimensions; the Symbolism tools share their brush. tool.setOption takes
{values} and a `tool` (another tool's options are stored for later), returns
the options, and works headless (MCP host command).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The issue asked for one-step symmetric shapes, splitting all selected art
along a line and cropping art to a rectangle as real geometry. Only the
freehand Knife and the Scissors existed, and neither works on compound
paths as one shape.
New commands path.mirrorCut, path.lineCut and path.rectCut cut the
selected paths and compound paths (inside groups too) with pathops
booleans against a half-plane or rectangle, and split open paths with
the Knife/Path Eraser helpers. Mirror & Cut reflects the kept half and
unites it with itself (open halves are joined on the axis). The draw2
piece helpers now rebuild compound paths too. Three tools (Eraser group,
original icons) preview the cut live while dragging and commit it as one
undo step; Mirror & Cut's axis and kept side are tool options shown in
the Control bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking with the Type tool runs text.create at once, and ending the edit
(Escape, another tool, a click elsewhere) only stopped editing, so every stray
click left an invisible empty text object and a "Type" history step.
The Type tool now remembers the point type its click placed and, when editing
ends with it still empty, runs the new text.discardEmpty command: it removes
the text and, when nothing else changed since the step that created it, drops
those steps so neither the document nor the history keeps a trace. A command
from outside the tool that takes the edited text out of the selection
(Deselect, a Layers panel pick) or removes it now ends the edit too
(Tool::after_command). Dragged area-type frames and type in or on a path keep
their frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rotating an object baked the rotation into its geometry and kept nothing
else, so the bounding box, the handles and the Transform/Properties
panels fell back to the page-aligned box (the Rotate field went back to 0).
Root cause: nodes carried no record of their own axes. Each node now
keeps `bbox_angle` (append-only, written only when non-zero), which every
transform turns with the object (mirroring transforms keep the nearer of
the two possible boxes). The geometry is still baked. The selection's box
(`Document::oriented_bounds`) stands at the angle the selected objects
share. The Selection tool hit-tests and scales its handles in that frame,
and the canvas draws it rotated. `object.setBounds` measures W/H and the
reference point along it. `object.rotate {absolute}` turns the selection
to an angle, which the panels' Rotate field now shows and sets. Object >
Transform > Reset Bounding Box (previously a no-op) clears the angle in
one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Show Print Tiling (view.printTiling) draws the pages of the
document's print settings on the canvas, dashed and numbered, from
print.preview's own layout (print.tiling), so the canvas and the
printed job agree. The Print Tiling tool replaces the no-op tool: a
drag places the first page's imageable corner (print.tiling.set,
saved as print_setup.tileOrigin, one undo step); a double click on
the canvas or the tool button resets it. Tiles start at the origin
and extend to cover the art; the Print dialog shows the tool's
placement with a Reset button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Slice tool (Shift+K) drags out a user slice (Shift square, Alt from the
centre, snapping to ruler guides) as one undo step through
object.slice.create. The Slice Selection tool selects slices (Shift
toggles, object.slice.select), moves them (object.slice.move; object
slices move their objects), resizes a user slice by its handles
(object.slice.setRect), opens Slice Options on a double click and deletes
with Delete (object.slice.delete). Hidden or locked slices can't be
picked. Both tools have cursors drawn in code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Links panel lists every image (thumbnail, name, page, missing/modified/embedded
badge) with Show filters, sorting and thumbnail sizes; its buttons and flyout relink
(to a file or a folder), go to, update, edit the original, embed and unembed, show in
folder and open Placement Options. Link Info shows format, colour space, location, ppi
and effective ppi, dimensions, scale, rotation, size and dates. Edit > Edit Original
and the Properties panel's image section reach the same commands.
Engine: links.list, links.goTo, links.embed, links.unembed, links.info and
links.placementOptions; links.relink and links.update now place the new file as the
image's Placement Options say (transforms, bounds, file dimensions, fit, fill, the
alignment point, clip to the old bounds). Model: ImageObject.placement.
UI: links.editOriginal, links.reveal, ui.placementOptionsDialog; Services.open_file
and pick_folder on the desktop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copy and Cut also offer other apps a PNG of the copied objects, a PDF
with On Copy: PDF, and plain text when every copied object is type
(clipboard.flavours; clipboard.exportPng {scale?}, exportPdf,
exportText). Paste outside text editing takes what another app copied:
SVG, then PDF (clipboard.importPdf), then plain text as point text
(clipboard.importText), then a bitmap embedded at the view centre
(clipboard.importImage {dataBase64, mime?, center?}); pasting our own
copy keeps the lossless internal clipboard, and Cmd+V pastes a bitmap
that comes with no text. Services gains system_clipboard
(SystemClipboard: write, holds_ours, read, has): on Windows every
format at once, on macOS and Linux one (the text, else the PNG); the
web keeps SVG text only. With When pasting text: Keep Plain Text, text
the Type tool copied pastes without its formatting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A linked image (`ImageObject.link`, now a LinkInfo: absolute path, path relative to the document,
size, modification time, hash, page; old path strings still load) keeps a low-resolution preview
(`ImageBlob.proxy`, at most 256 px a side) that a native save writes in place of the pixels of
images only linked images show. Opening a native document reads the linked files again, looking
for each at its path, then relative to the document and by name in its folder: missing files
show their preview, modified ones are read again only with Update Links: Automatically.
`document.open` reports `missingLinks`, `modifiedLinks` and `updatedLinks`.
links.check reports each link's status, links.update reads modified files again and
links.relink points images at another file or at same-named files in a folder (each keeps its
bounds; one undo step). In the app, a document opened without its linked files asks about each
(Replace…, Ignore, Apply to All), then offers to update modified links when the preference asks.
The renderer caches previews apart from the file's pixels; the Eyedropper samples previews in
the object's pixel space.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Files dropped on the canvas of an open document are placed at the drop point (linked; Shift
embeds); dropped on the tab bar or with no document open they open and join Open Recent Files.
The canvas is outlined while files are dragged over it. On the web, drag events give the drop
point and the files arrive through the inbox.
File > Place picks several files. file.place.queue loads the place cursor (the `place` tool):
a click places the current file at 100% with its top-left corner there, a drag places it at the
dragged size with its aspect kept, the arrow keys cycle the files and Esc discards one; the
previous tool returns after the last. The cursor shows the file's thumbnail and a count badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Document Setup is a tabbed dialog over one engine command,
document.setup (no params: a query; any keys: one undo step;
document.setUnits stays as the units alias).
- General: units, bleed (four sides with a link toggle), Edit Artboards,
Show Images in Outline Mode (greyscale pixels under the frame),
Highlight Substituted Fonts/Glyphs (pink boxes on screen only).
- Transparency: grid size and colour presets or custom colours, Simulate
Colored Paper, the flattener preset (built-in or saved) and Discard
White Overprint (Overprint Preview keeps white overprints visible).
- Type: language with its quotes, Use Typographer's Quotes for the Type
tool and Smart Punctuation, superscript/subscript size and position and
small caps size (Character panel position/smallCaps; changing the
setup restyles the text in the same undo step), text export (SVG text
as text or outlines by default).
- The canvas draws a red bleed outline and the grid in the document's
colours and cell size as one textured quad, also in rotated views; a
white Background Contents exports raster formats opaque.
Model: Document.setup (DocSetup, defaulted, skipped when default) and
CharStyle position/small_caps; old files load unchanged.
tests_transparencygrid's helper now finds the grid by its texture (the
grid is one textured mesh instead of per-cell rectangles).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The General unit is the active document's units: Preferences > Units >
General sets them (one undo step) and is the units new documents start
in (and the unit shown with no document open); Document Setup changes
only the document. The Transform panel, Properties, the Control bar, the
Info panel, rulers, the status bar, Align spacing, Tabs, paragraph
indents, Pattern Options, dialog distances (Move, shape sizes, path
dialogs, Artboard Options, effect distances, Transform Each, parameter
dialogs), New Document and the canvas measurement labels (smart-guide
sizes, moves, the Measure tool, the Live Corners radius) all follow it,
live. Units > Type drives font size, leading and baseline shift; Units >
Stroke also reaches the Appearance panel and the Magic Wand weight
tolerance. Typed units ("5 mm", "12 pt") work in any field; all ten
units are choices; length preferences show in their unit and accept a
unit; offset/simplify/grid/type-size params read typed units. Typed text
starting with a multi-byte character no longer panics the parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The M3/M4 work added ten panic sites the new workspace lints deny:
- doc: the lens/taper width profiles fall back to a uniform profile
instead of `expect` (the presets are a constant table, covered by tests).
- engine: `FlattenOptions::default` builds the medium preset directly
(`builtin`), `apply` skips an empty group instead of `expect`, the
writable-format fallback reports an error instead of `expect`, and the
new-art template's stroke comes back as an `Option` (it always has one)
instead of `expect`.
- tools: the freeform gradient drag returns no actions for a grab it never
starts (was `unreachable!`), and the gradient tool's release takes the
gesture with `if let` instead of `expect`.
Behaviour on the success paths is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shipped code no longer unwraps, expects or panics: every one of the 124
unwrap()/expect()/panic!/unreachable! sites outside tests now handles the
failure (Result/Option, ?, let-else, defaults) and reports errors to the user.
- Lints: workspace clippy denies unwrap_used, expect_used, panic, todo,
unimplemented and unreachable; clippy.toml allows them in tests, and
integration tests, examples and testkit opt out explicitly.
- Safety net (vectorcraft_engine::guard): a panic in a top-level command rolls
the document back and returns EngineError::Internal; a panicking tool is
reset; the MCP server answers with an internal error and keeps serving; the
UI frame and each control request are guarded.
- APIs that hid failures now return them: Rendered::to_png/to_jpeg/to_webp
return Result (JPEG/WebP errors used to write empty files),
FontDb::face returns Option, Region::top returns Option.
- Fuzzing: engine/tests/import_fuzz.rs feeds garbage, hostile and mutated SVG
and PDF through import → render → export (30k cases locally, no panics).
- Docs: AGENTS.md/CLAUDE.md rule, docs/development.md "Robustness" section,
README pointer and a PR template checklist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Radial gradients show a dashed extent ellipse: its handle across the bar
sets the aspect ratio, the ellipse elsewhere rotates it, and the dot inside
the centre ring drags the focal point (GradientGeom.focal) for an off-centre
radial. paint.setGradientGeom takes aspect (%) and focal ([x,y] | null), and
start/end may be left out; the focal point keeps its place in the ellipse as
the vector, aspect and object transform. It renders as a two-point radial,
exports and imports as SVG fx/fy and PDF two-point radial shadings, expands
to off-centre rings, and travels in gradient params and the native format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Gradient tool on a freeform gradient the selected point shows its
spread as a dashed ring with a handle; dragging either sets the spread. A
point dragged out of the object is removed on release, and double-clicking a
point opens the gradientStop popover, which now edits the selected freeform
point (colour, opacity, spread). In Lines mode successive clicks draw one
smooth line (with a rubber band to the pointer); clicking an existing point
continues the line from it, and Escape or a click off the art ends it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With nothing selected, Stroke panel edits (stroke.set / stroke.setAdvanced: cap, join, dashes,
arrowheads, profile...) and a graphic style clicked in the Graphic Styles panel
(graphicStyle.apply, add too) set up the next object drawn: its stroke options, fills, strokes,
effects, opacity and blend mode, linked to the style. The Appearance panel's New Art Has Basic
Appearance (appearance.setNewArtBasic, preference newArtBasic, on by default) now works: off,
new art takes the whole appearance of the last selection. paint.default resets the template,
appearance.newArt reports it, and with nothing selected the Stroke panel shows its stroke and
the Appearance panel its rows. PaintDefaults gains the template appearance, opacity, blend
mode and style.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a width point opens Width Point Edit (Side 1, Side 2, Total Width, a link
keeping the sides equal, Adjust Adjoining Width Points, Delete; dialog `widthPoint`, also
`ui.widthPointEdit`). Shift-click selects several width points, which drag and widen together
as one undo step; Alt-dragging a point's centre copies it (`stroke.widthPoint.copy`); dropping a
point onto another makes a discontinuous point (two points at the same t), and the stroke's
width steps there. `stroke.widthPoint.set` takes `adjustAdjoining`, keeps a discontinuous point
when only its widths change, and `stroke.widthPoint.remove` takes `indices`. Flipping a profile
along the path swaps the sides of its steps; `document.inspect` reports `widthPoints`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Use Preview Bounds on, the Transform panel, Properties and Control bar
X/Y/W/H, the Selection tool's bounding box, Align, Distribute and
Distribute Spacing measure visual bounds (the whole stroke). setBounds sets
the visual box, scaling the path so that kept or scaled strokes land on
the typed size. object.align/distribute/distributeSpacing take
bounds?: "preview"|"geometric"; the Align flyout item shows and toggles the
preference through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours gain a CIE Lab model (`Color::Lab {l,a,b}`, serde tag `lab`), handled through the
CMS (display, separation, conversions, gamut), tints (toward paper white), keep_model, harmonies,
recolouring, blends, Info and the Color panel. Swatch Options gets a Lab mode
(`swatch.edit {mode: "lab"}` / `{color: {l,a,b}}`), and colour params accept `{l,a,b}`.
Swatches panel → Spot Colors… (`ui.spotColors`, dialog `spotColors`) runs `swatch.spotOptions
{useLab}` (Document.spot_use_lab, default on): Lab spot colours show and separate from their Lab
values, or art linked to them takes their working-CMYK equivalents, as one undo step. PDF export
writes Lab spot inks as Separation spaces with a Lab alternate (tint function from paper white),
or a DeviceCMYK one with CMYK equivalents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Applying a gradient swatch records it as the gradient's swatch (the Swatches panel highlights
it and the Gradient panel's swatch menu marks it). A stop given a global or spot swatch (and a
tint) in paint.editGradient / a gradient paint's stops, dropped from the Swatches panel or
picked in the stop popover stays linked: editing the swatch recolours it, in art and in
gradient swatches, deleting it unlinks it. Spot stops separate on their plate, and a gradient
whose stops are all tints of one spot ink (or paper white) exports to PDF as a Separation
shading; gradients mixing models are written in one colour space (the PDF writer requires it;
mixed models used to abort the export).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BFlat
theironchef
Brandon Thomas
imachus
midasdf