Paragraph panel menu › Burasagari › None / Standard / Forced (with the East Asian options) and
`text.setFormat {burasagari}`:
- None: a comma or full stop that doesn't fit goes to the next line with the character before it.
- Standard: one that doesn't fit hangs outside the line; one that fits stays inside.
- Forced: one ending an area type line always hangs, and the rest of the line fills the measure.
Only 、 and 。 hang (closing brackets don't), in the width their mojikumi gives them. Horizontal
and vertical. Saved only when not None; new type keeps None. Paragraphs with burasagari are
composed line by line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of a ruler did not snap at all (only Shift to the ruler's
ticks): they now go through the engine (`Session::ruler_guide`, a
`NewGuide` previewing `guide.add`, one undo step) and snap as a moved guide
does: with Smart Guides to the edges, centres (so the sides' midpoints) and
anchors of the art and of the artboards, labelled; with Smart Guides off,
View > Snap to Point pulls new and moved guides onto anchors. Moving art
with the Selection tool already snapped flush to artboard edges and centres
with Smart Guides on; a test now covers it.
Artboard guides: `Guide.artboard` holds an artboard id (written only when
set, so canvas guides save as before and older files open unchanged).
`guide.add {artboard}` makes one, `guide.list` reports it; a guide dragged
out of a ruler with the Artboard tool belongs to the active artboard. It is
drawn, picked and snapped to across its artboard only, moves with it
(`artboard.move`, a pure move in `artboard.setProps`, `artboard.rearrange`),
is copied with it (`artboard.duplicate`, Alt-drag copy) and deleted with it
(`artboard.delete`, the guide selection kept in step).
Guides as Layers rows with their own lock and hide (part d) stay open: ruler
guides are not layer nodes; Lock Guides locks them all, and Make Guides
paths are Layers rows already. Listed in the ROADMAP parity row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type on a path could only be repositioned by Type on a Path Options, whose menu item sent
`{start: 0}`, so OK threw the text to the start of its path; nothing showed or dragged its
brackets. Now, as in Illustrator:
- Type on a path flows between a start and an end bracket (`TextKind::OnPath { end }`, None:
the end of the path or once round a closed one; `TextKind::path_span`). Flipping
(`TextObject::flip_on_path`) reverses the path keeping a closed path's first anchor and swaps
the brackets, so the type keeps its stretch of the path.
- Type on a Path Options gains Align to Path (ascender, descender, center, baseline) and
Spacing (glyphs spaced as if set that far above the path: closed up round the outside of
curves, opened up round the inside), laid out by the text engine.
- `type.pathOptions {start?, end?, flip?, effect?, alignToPath?, spacing?, ids?}` sets them in
one undo step; with none of them it queries. The menu item opens the dialog with the selected
type's Effect, Flip, Align to Path and Spacing (dropdowns for the choices) and leaves the
brackets alone, so OK as opened changes nothing.
- The Selection and Direct Selection tools show selected type on a path's path and its start,
centre and end brackets (`tools::pathtype`, with a bracket cursor): dragging the start or end
bracket sets where the type runs, dragging the centre bracket slides it along the path and,
across the path, flips it (Cmd/Ctrl held: it only slides). Each drag is one undo step.
- Arc-length measuring moved to `vectorcraft_geom::ArcPath` (layout, the tools and
`text.createInPath` share it). SVG export outlines path type whose end bracket, alignment or
spacing `<textPath>` can't express.
- docs/mcp.md documents the command and the drags; ROADMAP updated; dialog strings translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The pt ladder stays 0.25 … 10, 20, 30 … 100 pt (the dropdown's documented 20/30/40 pt steps).
- Feet, yards and meters returned the pt ladder converted as if it were in that unit (a 100 m
stroke); they now get the pt ladder in points.
- weight_presets returns a fixed array (no allocation per frame); the pica ladder is stored in
points; 0.325 in is 0.375 in (the eighths ladder).
- Fields keep three decimals in points, pixels and picas (595.276 pt) and show four in mm, cm,
inches and larger units (8.2677 in, 0.0078 in).
- ROADMAP: the Stroke panel's per-unit presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Stroke panel weight dropdown converted one pt-based preset list into
whatever Units > Stroke was set to, which produced ugly rounded values like
0.088 mm, 0.265 mm, 10.583 mm from the pt ladder. Each unit now has its own
native ladder (observed from Illustrator's running dropdowns and typed in),
converted to pt once at use. Points, Millimeters, Centimeters, Inches,
Pixels and Picas each get Illustrator's actual values; the exotic Unit
variants (Feet & Inches, Meters, Yards, Feet) fall back to the pt ladder.
Picas round-trip to exact pt weights (1 pt, 12 pt, 60 pt …) but display as
decimal picas until Unit::number learns 0p1 / 1p3 notation; that is a
system-wide formatter change left for a separate PR.
Also bumps Unit::number precision from 3 to 4 decimals so Illustrator's
sub-eighth-inch strokes (0.0078, 0.0156, 0.0313, 0.0625 in) show their
authored values instead of rounding to 0.008 / 0.016 / 0.031 / 0.063.
Trailing zeros are still trimmed, so 1 pt stays "1".
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Fourteen more Preferences options that were stored but read by nothing now
act, for the mouse and for agents (prefs.set, then pointer_gesture,
press_key or the commands):
- Selection & Anchor Display: Snap to Point and its distance (with Smart
Guides off, View > Snap to Point lands a dragged selection's grabbed
point, drawn points and reference points on anchors and ruler guides);
Move Locked and Hidden Artwork with Artboard (artboard.move, the Artboard
tool and Rearrange; off, hidden art now stays too); Enable Rubber Band for
the Pen and Curvature tools; Handles (solid, hollow, large);
Show handles when multiple anchors are selected (canvas and Direct
Selection's handle picking); Hide Corner Widget for angles greater than.
- General: Transform Pattern Tiles is the default of a new `patterns`
param on object.transform/move/rotate/scale/reflect/shear/transformEach
(journalled when the art uses a pattern), and the transform dialogs get a
Transform Patterns checkbox; Select Same Tint % (off, Select > Same
Fill/Stroke Color takes every tint of a global or spot swatch).
- Type: new type.step {attribute, by} steps size, leading, tracking, kerning
and baseline shift by the Size/Leading, Tracking and Baseline Shift
increments; Increase/Decrease Font Size (Cmd+Shift+. and Cmd+Shift+,);
the Type tool's Alt+arrows (kerning at a caret or tracking, leading,
Shift for baseline shift, Cmd/Ctrl for five steps). Enable Missing Glyph
Protection keeps characters a new font lacks in the font that had them
(text.setStyle, text.setRangeStyle). Fill New Type Objects With
Placeholder Text: type the Type tools place starts with placeholder text,
selected (text.create / text.createInPath take `placeholder`).
Units > General, Stroke and Type were already the single source of truth
(units.rs). Auto Size New Area Type, Show Font Names in English and
Highlight Alternate Glyphs need subsystems the app doesn't have yet and
stay open with the rest of #394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of the rulers could not be touched again: no tool hit-tested
them, so a click on a guide went to the art under it.
- The Selection, Direct Selection and Group Selection tools pick a ruler guide
within the selection tolerance (over the art; Direct Selection takes an
anchor on it first) through a shared tools::rulerguide::GuideEdit. A drag
moves the selected guides in one undo step (Alt copies them, Shift snaps the
dragged one to the ruler's ticks, otherwise it snaps to pixels, the grid or,
with Smart Guides, the art's edges, centres and anchors); dropped off the
canvas onto its ruler, the guide is deleted. Hidden or locked guides can't be
picked; the pointer shows which way a guide moves.
- Selection::guides holds the selected guides (on their own, like slices); the
canvas draws them in the selection colour. Delete/Backspace (edit.clear)
delete them, the arrow keys (object.nudge) nudge them, Lock Guides and Hide
Guides deselect them.
- Commands for agents: guide.list, guide.select {indexes, toggle?},
guide.move {dx?, dy?, copy?} (besides {index, pos}) and guide.remove {index?};
guide positions out of range are refused. Documented in docs/mcp.md.
- Shift while dragging a new guide out of a ruler snaps it to the ticks too
(Unit::ruler_step, shared with the rulers' drawing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Characters of different sizes on one line all sat on the Roman baseline.
Japanese layout usually lines them up by their ideographic em boxes
instead (a 16 pt 第一回 next to 32 pt 雅楽 centred on it, not sitting on
its baseline). The Character panel menu now has Character Alignment:
- `CharStyle.char_align`: Roman Baseline (as before, the default), or the
em box Top/Right, Center or Bottom/Left: a character smaller than the
line's largest moves so that its em box top, centre or bottom lines up
with the largest's (the em box from the font's vertical metrics, else
0.12 em below the baseline to 0.88 em above it). Vertical type the
same across the column (top → right). Written only when not Roman
Baseline.
- `text.setFormat {charAlign: "romanBaseline"|"emBoxTop"|"emBoxCenter"|
"emBoxBottom"}`; the menu shows the selection's setting; catalog rows
in ja and zh-hant.
- Not yet: aligning on the ICF (average character face) top and bottom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese layout measures leading from the top of one line's ideographic
em box to the next (the right side, in vertical type), not from baseline
to baseline. The Paragraph panel menu now offers both:
- `ParaStyle.leading_model`: RomanBaseline (as before, the default) or
EmBoxTop. With EmBoxTop a line's leading is the space below it — the
next line's em box top is this line's plus its leading, and the next
baseline hangs from there by that line's tallest em box — and area
type's first line touches the top of the frame (its em box top on the
frame's top, at least Area Type Options' minimum). With baseline
leading a line's leading stays the space above it.
- Lines of one size are exactly as far apart either way; the models
differ for mixed sizes and for the first line of area type (fonts
whose ascent isn't the em box top: Hiragino's nearly is).
- The em box top comes from the font's vertical metrics (#343), else
0.88 em. Written only when EmBoxTop.
- `text.setFormat {leadingModel: "romanBaseline"|"emBoxTop"}`; menu items
Top-to-Top Leading / Bottom-to-Bottom Leading (checked as set); catalog
rows in ja and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A PDF's DeviceCMYK image opened as RGB (the interpreter's pixels as a PNG),
so every export wrote it as DeviceRGB or ICC RGB, silently. Images now keep
their CMYK samples, as CMYK colours already did:
- Model: CMYK images are blobs holding CMYK samples, a four-component JPEG
(Adobe's inverted samples) or a Deflate CMYK TIFF. vectorcraft-doc's cmyk
module reads their ink amounts (ImageBlob::is_cmyk, ::cmyk, capped at 64
megapixels) and writes the TIFF (ImageBlob::cmyk_tiff).
- PDF import: DeviceCMYK, CalCMYK and four-component ICC images keep their
samples. A JPEG with Decode [1 0 1 0 1 0 1 0] is kept byte for byte; any
other is decoded (8 or 16 bits, its Decode array applied) and stored as a
CMYK TIFF. Masked CMYK images and 1/2/4-bit ones open in RGB with a warning.
Placing a CMYK TIFF keeps it CMYK too.
- PDF export: CMYK images are written in CMYK (DeviceCMYK, or ICC-based with
the CMYK profile when colours are tagged: PDF/X-3, PDF/X-4, PDF/A). A CMYK
JPEG neither resampled nor recompressed passes through unchanged; others are
resampled in CMYK and compressed as ZIP or as a CMYK JPEG (jpeg-encoder,
which also replaces the ZIP fallback and its warning for images converted to
CMYK). Output conversion treats them like CMYK colours: Preserve Numbers and
PDF/X-1a keep their numbers, Convert to Destination converts them to another
CMYK profile or to RGB through a 17^4 lookup table (cms::CmykLut, now also
behind the renderer's ink table). A CMYK image that can't be decoded is
reported in the warnings.
- Canvas: CMYK images show through the working CMYK profile, as CMYK fills
do, and paint their own inks in ink planes (CMYK raster exports, CMYK
blending). SVG export writes TIFF images as PNG.
Illustrator's Output › No Conversion keeps colour data as it is
(https://helpx.adobe.com/illustrator/using/pdf-options.html).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator sets a paragraph's direction (Left-to-Right / Right-to-Left
Paragraph Direction in the Paragraph panel, with the Middle Eastern
options) and keeps its alignment buttons physical; it has no automatic
alignment toggle. So:
- ParaStyle.direction (None: from each paragraph's first strong
character, as before; written only when set), the Paragraph panel's two
direction buttons with Show Indic Options (original icons), and
text.setFormat {direction: "auto"|"leftToRight"|"rightToLeft"}. The
layout uses it as the base direction.
- The Automatic alignment check box is gone. Justify::Auto stays as the
start of the paragraph's direction, set on new type only (text.create,
the Type tools, with the mojikumi default in one new_type_para()):
TextObject::point is Left again, so importers (PDF, SVG, DXF, EMF) keep
their own alignment. The alignment buttons show what Auto resolves to.
- Bidi only where there is something right to left: plain paragraphs skip
the algorithm (no per-layout allocation), it runs once per paragraph
(shaping takes the paragraph's levels instead of recomputing them; path
type computed it four times), and the shaper keeps Han, Hiragana,
Katakana and Bopomofo in one segment (splitting at every change of
script cost Japanese text a shaper call per kana-kanji switch).
- Vertical type keeps its logical order, so its glyphs and lines are not
marked right to left (the caret no longer runs backwards down a column).
- PDF import puts Hebrew and Arabic, which PDFs (and VectorCraft's own
export) draw in visual order, back in logical order with the direction
that shows it as drawn; with bidi layout it came back mirrored.
- SVG import pins the direction SVG implies (left to right unless
direction: rtl); SVG export also outlines right-to-left paragraphs.
- Docs (development.md), ROADMAP (folded into the Type entry, Type core
row) and README updated; catalog rows for the new labels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A file's saved selections are untrusted: on load at most 25 are kept, names
are trimmed, capped at 255 characters and unique, and ids the document
doesn't have are dropped (after fix_next_id such an id would select whatever
object is drawn next). Save and Edit Selection cap names the same way. The
limit, the name cleanup and the default "Selection N" live on
SavedSelection, shared by the engine, the Save Selection dialog and the
Select menu's slot table. docs/mcp.md documents the select.save /
savedList / recall / editSaved commands; ROADMAP counts 13 stubbed menu items
and names what's still missing (Update Selection, the Layers panel menu).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Snapping to the Artboard Tool
Merged with the Artboard tool's Alt-drag duplicate (#348): a copy snaps too, and to the artboard
and art it leaves behind (a move skips them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine kept its own copy of Document::next_layer_name after #353; the
document's now counts sublayers too, so the engine uses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new sublayer was named "Layer {node_count}", counting every object, so
an empty document's first sublayer was "Layer 1" like its parent and a
document with five objects got "Layer 6". Top-level layers counted only
top-level names and could repeat a sublayer's. Document::next_layer_name
now counts every layer, sublayers included, and skips any layer's name;
layer.newSublayer uses it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese full-width punctuation is half a mark and half a space (an
opening bracket's space before it; a closing bracket's, comma's or full
stop's after it). Set solid, 」「 or 。」 show a full em of air between
the marks, and a line ending in 。 stops half an em short of the edge.
- `ParaStyle.mojikumi` (Paragraph panel › Mojikumi): None, or Line-end
Punctuation Half Width, which (JLREQ 3.1.4) lets consecutive
punctuation share one half-em space — a closing mark followed by
punctuation loses the space after it, an opening bracket after another
the space before it — and sets a closing mark ending a line half
width. Only full-width marks (advance an em) are touched, never inside
a tate-chu-yoko block; vertical type the same way down the column.
- New type (`text.create`, Area/Path Type) takes Line-end Punctuation
Half Width, the usual default of Japanese layout; documents from
before it and imported text keep None (written only when set, so
older files and older apps are unaffected). `text.setFormat
{mojikumi: "none"|"lineEndHalf"}`.
- Builds on #344: on justified lines the room it frees is spread
between the characters.
- Catalog rows in ja and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Art in a sublayer is now selected as objects (clicks, marquee, Select All, the
Select menu), sublayers select in their own colour, and hidden, locked or
template sublayers block clicks. Layer Options gain Preview (per-layer outline)
and Dim Images. New and fixed layer.* commands for the Layers panel: setCurrent
and highlight (rows at any depth), selectAll, move (reparent with cycle and
nesting checks, Alt copies), delete/duplicate rows, merge, flatten, collect,
release to layers, reverse, template, hide/outline/lock others and their
show/preview/unlock all, locate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Save Selection… asks for a name and keeps the selection in the document (saved with
the file, undoable, at most 25) instead of in session memory keyed by the title.
Each saved selection is listed at the bottom of the Select menu and a click selects
its objects again. Edit Selection… opens a dialog with the list to rename or delete
them, applied together on OK as one undo step (select.editSaved takes `edits`).
The menu stub count in the ROADMAP goes from 16 to 15.
- Pins show as soon as the tool has art selected: automatic ones at the
centre and the middle of each limb's end (at least three), until pins are
placed. They stay across tool switches while the selection is unchanged and
a new selection starts afresh.
- The pins live in the document (Document.puppet, never saved) with the rest
shape they started from: every warp starts from it, so warps don't stack and
dragging a pin back restores the original; Undo/Redo take the pins back with
the art. Adding and deleting pins are undo steps too.
- object.puppetWarp gains rest: true (the tool's pins); the new query
object.puppetWarp.pins reads them. A click off the mesh adds nothing and
says so (not-allowed cursor, canvas label); the command refuses such pins.
- The mesh grid covers the expanded art, so tiny art with a wide Expand no
longer allocates millions of cells.
- Tests on groups, compound paths and open strokes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Blend Options is a dedicated dialog (Spacing dropdown with its value,
Align to Page / Align to Path buttons, live preview) opened on the
selected blend's own options, so OK no longer turns Smooth Color into
5 steps; with nothing selected it sets what new blends start with
(object.blend.info reads them). The Blend tool blends from clicked
anchor points (blend spec `starts`), adds keys to an existing blend
instead of nesting it, opens Blend Options on double-click, Alt-click
and its toolbar button, and has its own cursors and hint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Selection tool shows the selection's bounding box in perspective; its handles
scale in plane space (perspective.transform; Shift proportional, Alt from the centre). Alt-drag
moves copies that stay attached, pressing 5 while dragging moves along the plane's normal
(ToolKey::Digit, delivered by the canvas and MCP press_key), and the arrow keys nudge in
perspective (perspective.nudge). Transform Again repeats the last perspective move or scale in
plane space. Attachments (plane and depth) now live on the objects (Node.perspective), so copies,
duplicates and pastes keep them; grids from older files hand theirs over. Homography moves to
vectorcraft-geom. Hint-bar text for the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The issue asked for non-destructive colour adjustments in the Effect menu
and the Appearance panel that work on vector paints, live type and
embedded images. Only the destructive Edit Colors commands existed, and
the live-effect pipeline only knew geometry and raster effects.
Effect > Color Adjustments adds six effects (adjust.*). They recolour,
in stack order, everything an object paints with: fills and strokes
(gradient stops too), type, gradient meshes, embedded images and a
group's members, each colour keeping its model. The Edit Colors walk over
an object's colours moved to vectorcraft_doc::recolor so the commands
and the live effects share it. The renderer draws adjusted art through
its object-effect path (recoloured images cached within a memory
budget), exports bake the adjusted colours (images as recoloured
copies), and Expand Appearance makes them permanent. The effect dialog
shows sliders, a channel menu and a draggable Curves graph, all previewed
live as one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A `*` or `/` operand had to be a bare number, so `1080/2 px` (the number
replaced by an expression, the field's suffix still there) read as nothing.
The unit after a factor or divisor now measures the whole expression, in
every unit (`Unit::parse`, shared by every unit field). Numeric fields
(num_field, opt_field, plain/mixed fields) select their whole text, unit
included, when they gain focus or are double-clicked, so typing replaces it;
unitless fields gain the same arithmetic (`parse_number`, `45*2°`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rotating an object baked the rotation into its geometry and kept nothing
else, so the bounding box, the handles and the Transform/Properties
panels fell back to the page-aligned box (the Rotate field went back to 0).
Root cause: nodes carried no record of their own axes. Each node now
keeps `bbox_angle` (append-only, written only when non-zero), which every
transform turns with the object (mirroring transforms keep the nearer of
the two possible boxes). The geometry is still baked. The selection's box
(`Document::oriented_bounds`) stands at the angle the selected objects
share. The Selection tool hit-tests and scales its handles in that frame,
and the canvas draws it rotated. `object.setBounds` measures W/H and the
reference point along it. `object.rotate {absolute}` turns the selection
to an angle, which the panels' Rotate field now shows and sets. Object >
Transform > Reset Bounding Box (previously a no-op) clears the angle in
one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.open and file.place read .eps files and PostScript by any name
(PostScript .ai opens as artwork, .ait as a new untitled document). An EPS
file VectorCraft wrote restores the document it carries (restored: true);
other files run through a small clean-room PostScript interpreter (paths,
colours and spot inks, gsave/grestore, concat, line state, bind def,
procedures, loops and dictionaries, clips, shadings, images through the
decoding filters, type as point type), and fall back to their TIFF preview
with a warning when the program can't be read. Operation, nesting, memory
and path budgets keep hostile files from hanging or exhausting memory.
The clipping-group nesting the metafile reader used moves to
vectorcraft_doc::clipnest, shared by both readers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Asset Export lists the document's assets as thumbnails: art
dragged in off the canvas (or added with +) becomes one asset per object,
or one of them all with Alt; Object > Collect for Export does the same.
Assets name their objects, so they follow edits (moving the art moves the
crop) and deleting the art removes it from its asset. Click selects,
double-click renames, the bin removes. The panel's export settings are
Export for Screens' own format rows on the document's shared settings, and
Export writes each asset alone, cropped to its art, into a picked folder
(the web downloads a zip). Export for Screens' Assets tab lists the assets
with checkboxes and exports the checked ones.
Commands: assets.add, assets.remove, assets.rename, assets.list,
assets.export, assets.settings.set; document.exportForScreens takes
assets. Model: Document.assets (ExportAsset {id, name, nodes}).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
file.print {settings?, path?} lays the document out on paper and writes one PDF page per sheet:
copies (collated, reversed), artboards (all, a range, ignored), blank artboards skipped, paper
size and orientation (or turned per artboard), transverse, Print Layers (template layers never
print), placement on the imageable area, no scale / fit / custom / tiles of the paper or of the
imageable area with overlap and a tile range; printer's marks and bleed as PDF export draws
them; composite or separations (one grey plate per ink that prints, overprints honoured, spots
as process), emulsion down, negative; rendering intent and preserve numbers. print.preview lists
the pages, tiles, inks and warnings; print.setup saves the settings with the document
(Document.print_setup, one undo step).
PDF export and print share one page writer; the ink separation helpers move from the renderer to
vectorcraft_doc::inks and the range parser to vectorcraft_doc::range so print can use them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Artboards: All, a range or Full Document (one file per format: a PDF of
every artboard, other formats the bounds of all art), Include Bleed
(artboards grown by the document's bleed). Rows size files as a factor,
100w, 100h or 72ppi (suffixes @2x, @100w, @100h), and choose PNG, PNG 8,
JPG 100/80/50, WebP, GIF, SVG or PDF. Create Sub-folders (by size, by
format, or a row's own folder) and the presets Mobile 1x/2x/3x and
Density buckets (ldpi…xxxhdpi sub-folders). The gear opens Format
Settings: per-format options for every row of that format (the raster
and SVG options dialogs' rows, the PDF preset). Open Location after
Export shows the first file. The dialog has Artboards and Assets tabs.
The params of the last export are saved in the document
(Document.export_settings, not an undo step), read with
document.exportSettings, and the dialog reopens on them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Luminosity soft masks become opacity masks (alpha masks as a white copy of
their art; backdrop colour gives Clip, an inverting transfer function Invert;
the PDF export's backdrop and Difference covers read back as the options; a
constant alpha mask is opacity). Transparency groups keep their /I and /K
flags (read by walking the content as the interpreter does). Tiling patterns
become pattern swatches (one per colour for uncoloured ones). Text becomes
point type, one object per line with a run per font and paint, fonts named
from the file (document.open textAs: text | outlines). Patch and triangle
mesh shadings become gradient meshes; gradients drawn through their grey
opacity mask get stop opacity back; shadings that don't extend clip the art.
A rectangular clip around all its art (a form's box) is dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document.slices holds user slices, Node.slice makes an object an object
slice that follows its bounds, and Document.slices_clip_to_artboard picks
the region auto slices fill (the artboards, or the art and the slices).
Object → Slice: Make, Release, Create from Guides, Create from Selection,
Duplicate, Combine, Divide… (dialog), Delete All, Slice Options… (dialog)
and Clip to Artboard; View → Hide/Lock Slices; Select → Object → Slices;
slice.list reads the numbered layout. The canvas draws the slices in the
Slices preferences' line colour with their numbers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Links panel lists every image (thumbnail, name, page, missing/modified/embedded
badge) with Show filters, sorting and thumbnail sizes; its buttons and flyout relink
(to a file or a folder), go to, update, edit the original, embed and unembed, show in
folder and open Placement Options. Link Info shows format, colour space, location, ppi
and effective ppi, dimensions, scale, rotation, size and dates. Edit > Edit Original
and the Properties panel's image section reach the same commands.
Engine: links.list, links.goTo, links.embed, links.unembed, links.info and
links.placementOptions; links.relink and links.update now place the new file as the
image's Placement Options say (transforms, bounds, file dimensions, fit, fill, the
alignment point, clip to the old bounds). Model: ImageObject.placement.
UI: links.editOriginal, links.reveal, ui.placementOptionsDialog; Services.open_file
and pick_folder on the desktop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Format v3: optional gzip (Preferences > File Handling > Use Compression, or
document.save {compress}); compressed files open by their magic bytes, legacy
ones too.
- Every file write goes to a temporary file renamed over the target (engine
writes and the desktop app's writer), so a failed save keeps the old file.
- Only the images the document uses are written.
- Document keys from newer versions are kept (Document.extra, flattened).
- Assigned colour profiles are a real field (Document.color_profiles),
migrated from unknown.colorProfiles on load.
- document.save {version: 1|2} writes files older versions open; {preview}
embeds a PNG of the first artboard of at most 256 px.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Older native files (.drawcraft or an older format version) open as
"<name> [Converted]" and Save asks for a .vectorcraft name instead of
overwriting them (preference appendConverted). Open Recent Files honours the
0-30 preference; empty slots are hidden (the native menu rebuilds when they,
saved views or User Defined libraries change). File > Document Color Mode is
one command, file.documentColorMode, converting through the colour settings;
choosing the current mode is not an edit, and object.convertDocumentColorMode
stays as an alias the command palette leaves out. New File > Show in Folder
(file.reveal; paths with spaces work on Windows). Native files store the view
they were saved with (Document.last_view, written at save time so it never
dirties the document) and reopen there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A linked image (`ImageObject.link`, now a LinkInfo: absolute path, path relative to the document,
size, modification time, hash, page; old path strings still load) keeps a low-resolution preview
(`ImageBlob.proxy`, at most 256 px a side) that a native save writes in place of the pixels of
images only linked images show. Opening a native document reads the linked files again, looking
for each at its path, then relative to the document and by name in its folder: missing files
show their preview, modified ones are read again only with Update Links: Automatically.
`document.open` reports `missingLinks`, `modifiedLinks` and `updatedLinks`.
links.check reports each link's status, links.update reads modified files again and
links.relink points images at another file or at same-named files in a folder (each keeps its
bounds; one undo step). In the app, a document opened without its linked files asks about each
(Replace…, Ignore, Apply to All), then offers to update modified links when the preference asks.
The renderer caches previews apart from the file's pixels; the Eyedropper samples previews in
the object's pixel space.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.rasterEffectsSettings now also takes and reports colorModel,
background, antiAlias, clippingMask, addAround and preserveSpotColors in one
undo step (Document.raster_effects, RasterEffectsSettings, next to the
existing raster_effects_ppi so old files load unchanged). The raster effect
images of PDF export and Expand Appearance get the extra room and are
finished by the settings (hard edges, grayscale or bitmap, opaque on
white, white only under the art with a clipping mask). Rasterize takes
them as defaults (params override), and its clipping mask puts the image
in a clip group with the art's outline. The settings have their own dialog
(rasterEffectsSettings, ui.rasterEffectsSettingsDialog) and Rasterize…
opens its options prefilled from them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
file.info takes and reports the title, author, author title, description,
keywords, rating, copyright status, notice and URL in one undo step, plus
the read-only created (file.new) and modified (every save to a file) dates;
junk values are refused. Document.metadata (DocMetadata) round-trips
natively. PDF export writes author, subject and keywords to the info
dictionary and XMP, PNG export writes tEXt/iTXt chunks, SVG export writes
<desc> and, with the metadata option, every field as Dublin Core. The File
Info dialog (fileInfo, ui.fileInfoDialog) edits it with keyword chips and
star ratings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paste (also without formatting) goes to the centre of the view
(edit.paste {center}); Paste in Front/Back with nothing selected go to
the top/bottom of the current layer, in order; Paste on All Artboards
keeps the objects' offset to the artboard they were copied from.
layer.pasteRemembersLayers {on?} (document flag paste_remembers_layers,
saved, document.inspect) pastes objects back into the layers they came
from by name, making missing ones; the Layers panel now has its menu
with the layer commands and the check item. The Paste menu items are
enabled while the system clipboard holds SVG (looked at once per frame
at most, a few times a second).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Document Setup is a tabbed dialog over one engine command,
document.setup (no params: a query; any keys: one undo step;
document.setUnits stays as the units alias).
- General: units, bleed (four sides with a link toggle), Edit Artboards,
Show Images in Outline Mode (greyscale pixels under the frame),
Highlight Substituted Fonts/Glyphs (pink boxes on screen only).
- Transparency: grid size and colour presets or custom colours, Simulate
Colored Paper, the flattener preset (built-in or saved) and Discard
White Overprint (Overprint Preview keeps white overprints visible).
- Type: language with its quotes, Use Typographer's Quotes for the Type
tool and Smart Punctuation, superscript/subscript size and position and
small caps size (Character panel position/smallCaps; changing the
setup restyles the text in the same undo step), text export (SVG text
as text or outlines by default).
- The canvas draws a red bleed outline and the grid in the document's
colours and cell size as one textured quad, also in rotated views; a
white Background Contents exports raster formats opaque.
Model: Document.setup (DocSetup, defaulted, skipped when default) and
CharStyle position/small_caps; old files load unchanged.
tests_transparencygrid's helper now finds the grid by its texture (the
grid is one textured mesh instead of per-cell rectangles).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The General unit is the active document's units: Preferences > Units >
General sets them (one undo step) and is the units new documents start
in (and the unit shown with no document open); Document Setup changes
only the document. The Transform panel, Properties, the Control bar, the
Info panel, rulers, the status bar, Align spacing, Tabs, paragraph
indents, Pattern Options, dialog distances (Move, shape sizes, path
dialogs, Artboard Options, effect distances, Transform Each, parameter
dialogs), New Document and the canvas measurement labels (smart-guide
sizes, moves, the Measure tool, the Live Corners radius) all follow it,
live. Units > Type drives font size, leading and baseline shift; Units >
Stroke also reaches the Appearance panel and the Magic Wand weight
tolerance. Typed units ("5 mm", "12 pt") work in any field; all ten
units are choices; length preferences show in their unit and accept a
unit; offset/simplify/grid/type-size params read typed units. Typed text
starting with a multi-byte character no longer panics the parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shipped code no longer unwraps, expects or panics: every one of the 124
unwrap()/expect()/panic!/unreachable! sites outside tests now handles the
failure (Result/Option, ?, let-else, defaults) and reports errors to the user.
- Lints: workspace clippy denies unwrap_used, expect_used, panic, todo,
unimplemented and unreachable; clippy.toml allows them in tests, and
integration tests, examples and testkit opt out explicitly.
- Safety net (vectorcraft_engine::guard): a panic in a top-level command rolls
the document back and returns EngineError::Internal; a panicking tool is
reset; the MCP server answers with an internal error and keeps serving; the
UI frame and each control request are guarded.
- APIs that hid failures now return them: Rendered::to_png/to_jpeg/to_webp
return Result (JPEG/WebP errors used to write empty files),
FontDb::face returns Option, Region::top returns Option.
- Fuzzing: engine/tests/import_fuzz.rs feeds garbage, hostile and mutated SVG
and PDF through import → render → export (30k cases locally, no panics).
- Docs: AGENTS.md/CLAUDE.md rule, docs/development.md "Robustness" section,
README pointer and a PR template checklist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient panel's Stroke buttons now work: with the Stroke proxy on a
linear or radial gradient they lay it within the stroke (placed on the
page, as before), along the path (start to end of each subpath) or across
it (left edge to right edge; inside/outside strokes span their visible
side). `paint.editGradient {stroke: true, strokeMode}` sets it (new art
too with nothing selected); `document.inspect` reports
strokeOptions.gradientMode. Model: StrokeLayer.gradient_mode (default
Within, not written).
Shared geometry in effects::stroke::gradient: ribs on the bisectors of
the flattened path (fans round sharp corners, widened under arrowheads,
following width profiles) cut slices each painted with a linear piece of
the gradient (Gradient::span). The canvas and raster export clip them to
the stroke's outline and arrowheads, grown a pixel and composited with
copy so there are no seams and translucent stops paint once. SVG and PDF
write the same slices clipped to the outline, with a warning (new
vectorcraft_svg::export_with_report). Outline Stroke and Expand make
gradient meshes clipped to the outline. Mesh quads now grow along their
edges so thin quads show no seams. Dashes, profiles and arrowheads keep
working in both modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scaling with Scale Strokes & Effects on now scales stroke weights, dash
lengths and dash offsets and every distance parameter of object, fill and
stroke effects (groups and layers too), from new length metadata in the
effects catalogue. Off, nothing painted changes size and type keeps its
character strokes' weight. Scale Corners off keeps live corner radii.
object.scale/transform/transformEach take strokes?/corners? (default: the
preferences) and journal the values they used. The Scale dialog and a new
Transform Each dialog get both checkboxes, kept as the preferences on OK;
the panels' toggles go through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours gain a CIE Lab model (`Color::Lab {l,a,b}`, serde tag `lab`), handled through the
CMS (display, separation, conversions, gamut), tints (toward paper white), keep_model, harmonies,
recolouring, blends, Info and the Color panel. Swatch Options gets a Lab mode
(`swatch.edit {mode: "lab"}` / `{color: {l,a,b}}`), and colour params accept `{l,a,b}`.
Swatches panel → Spot Colors… (`ui.spotColors`, dialog `spotColors`) runs `swatch.spotOptions
{useLab}` (Document.spot_use_lab, default on): Lab spot colours show and separate from their Lab
values, or art linked to them takes their working-CMYK equivalents, as one undo step. PDF export
writes Lab spot inks as Separation spaces with a Lab alternate (tint function from paper white),
or a DeviceCMYK one with CMYK equivalents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[Registration] is a built-in swatch that prints 100% on every plate: Separations
Preview shows it on each process and spot plate and PDF export writes it as
/Separation /All. It can't be edited, moved, duplicated, merged or deleted;
swatch.list shows it after None and the Swatches panel applies it as a swatch.
Object > Create Trim Marks strokes the marks in Registration and marks every
artboard when nothing is selected ({style?, allArtboards?}). The preference
japaneseCropMarks (General) switches to Japanese marks: double lines at the
trim and bleed edges plus centre marks. Effect > Crop Marks (cropMarks) is a
live effect whose marks follow the object; rendering, SVG/PDF export and
Expand Appearance draw them. The mark geometry lives in doc::marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Attributes (Cmd+F11) shows Overprint Fill/Stroke, Show/Don't Show
Center, Reverse Path Direction Off/On, the non-zero / even-odd fill rule,
Image Map, a URL field with recent URLs and a Browser button, and a note.
New commands attributes.set and path.setFillRule; path.reverse takes ids and
reversed; attributes.info reports every value. Objects keep the attributes in
Node.attrs. SVG export wraps linked objects in <a>, and import reads links
back. The canvas draws the centre point of selected objects that show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Graphic Style Libraries and the Graphic Styles panel's library button open
read-only libraries of original styles generated in code (Shadows and Glows, Outlines
and Rules, Hand-Drawn, Gradient Finishes, Shape Effects, Blends and Transparency) in
the shared library panel. Clicking a style adds it and applies it to the selection as
one undo step (Alt: on top). Save Graphic Style Library writes .vcstyles JSON (styles
unlinked from swatches, with the patterns they paint with) to the user library folder
(User Defined) or a file; Other Library loads one, or another document's styles.
Commands: graphicStyle.libraries, graphicStyle.library, graphicStyle.addFromLibrary,
graphicStyle.saveLibrary, graphicStyle.loadLibrary; UI: window.graphicStyleLibrary
(.other), ui.saveGraphicStyleLibrary, window.userGraphicStyleLibrary1-10. The user and
loaded library bookkeeping is shared with swatch libraries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paths and compound paths now measure their visual bounds along their shape:
the body (inside/outside alignment, the width profile's widest point), the
tips of the miter spikes the limit keeps, projecting caps' corners and the
arrowheads' reach. A rectangle's right-angle miters stay within half the
weight (Fit to Selected Art, Rasterize and all-art SVG export get tighter,
exact boxes); Appearance::outset is the conservative reach for anything else.
Clicks hit what the strokes paint: outside strokes outside the path (0.8 x the
weight out), inside ones inside, the profile's width where clicked, caps,
spikes and heads. Click culling keeps a cheap box (hit test 0.34 ms per click
on the 50k-path budget). The subpath/tangent helpers move from the stroke
geometry into vectorcraft_geom::bez so both share them; a cross-check test
holds every painted point of the real stroke geometry inside the bounds and
hittable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
imachus
bflatastic
raytheengineer
Brandon Thomas
theironchef
haven
Sarah Wesker