The documented option "replaces slightly curved lines with straight lines and snaps lines near 0 or 90 degrees
to absolute 0 or 90 degrees" (helpx, Image Trace panel options); ours did the first half only.
- With Snap Curves To Lines, a straight piece at least 2 px long and within 2.5 degrees of level or upright is
made exactly so, by moving its ends across it to their mean (the page gives no angle: 2.5 degrees is our
choice). The pieces next to a moved end follow it.
- A junction other regions share stays where it is, so abutting regions still have one curve along their edge;
a line between a junction and a free end is levelled to the junction.
- The harness gains askew inputs (a rectangle, a plus sign and two lines, 1 to 2 degrees off level and upright)
and an "upright %" column: the share of the outline length that is exactly level or upright.
On the clean askew inputs (docs/image-trace-quality.md): Black and White Logo and Technical Drawing, the presets
with the option on, go from 0% to 91% and 95% of their outline exactly level or upright. Their outlines are then
0.49 and 0.59 px from the art as drawn where they were 0.05 (4.2 px at the far end of a 300 px side turned 1.5
degrees): that distance is what the option is for. Presets without the option are unchanged.
612082e26e