Recover the unpublished denoise work against current upstream. Preserve later opt-in model setup, shared Rust HTTPS downloads, pending-photo resume and an Amount-independent switch. Keep original RAWs unchanged and share the current color finish between ordinary and denoised sources.
Bound public tiling inputs, refuse corrupt-cache exports, and retain synthetic/real-model coverage. Include two Windows path spelling fixes in existing tests. No model weights, face code, media or Tract runtime are included.
Validation: cargo xtask ci (all seven gates); installed RawNIND CPU/GPU agreement 1.38e-6; native CPU preview/export on a public 24 MP Sony RAW, unchanged original SHA-256.
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Generated with Codex.
A full-size load asks the decoder for the largest box (`SourceLevel::Full` is
`usize::MAX`, cast to `u32::MAX`). `jpeg::decode` then computed `2 * u32::MAX` to
decide on DCT scaling: an overflow panic in debug builds (caught, so every
full-size JPEG load failed with "decoder panicked"), and a wrap that happened to
give the right answer in release. The comparison saturates now, and the engine
converts its `usize` edge with `u32::try_from` instead of a truncating `as`.
Found decoding camera JPEGs (no JFIF/EXIF header) at full size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lightroom Classic reads `ToneCurvePV2012Red/Green/Blue` only together with
`ToneCurvePV2012`: a packet with a channel curve and no master curve leaves the
photo unchanged there (rendered on a chart: the channel curve alone has no
effect, with an identity master curve it applies). Imports now do the same.
The preset-packet test helper uses made-up as-shot values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
XMP presets usually say LensProfileEnable=0, which turned optics.lens_profile
off and with it the DNG-embedded WarpRectilinear / FixVignetteRadial
corrections (iPhone ProRAW and other files that carry them). Lightroom
applies a file's built-in corrections whatever that switch says (our
inference), and LightCraft's profile corrections are only those embedded
ones, so crs import now carries over only an enabling switch. The Enable
Lens Corrections checkbox and the amount sliders keep working as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
XMP presets carry fields that describe the preset or the photo rather than
an adjustment (Cluster, SupportsAmount2, RequiresRGBTables, SortName,
Description, CropConstrainToWarp, OverrideLookVignette, AsShotTemperature /
AsShotTint). preset.import listed them as settings that couldn't be carried
over; so did an HDREditMode of 0 and PointColors slots that are all -1.
They are now treated as bookkeeping; an HDR edit, a used Point Color slot and
unknown adjustments are still reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CR2 and PEF decode without a camera colour matrix, like ARW, NEF, RW2,
RAF and CR3, but camera_preview::file_local_look (and the catalog's
relative white balance) left them out, so they rendered with the neutral
fallback matrix: the camera preview showed first, then a flat,
desaturated render replaced it. They now use the same guarded fit and
relative WB; a fit that fails the gates keeps the fallback, so a file can
only stay as it was or move closer to its camera JPEG. Not measured on
the corpus here (raw.pixls.us is blocked from this environment).
RENDER_CACHE_VERSION 15 re-renders cached CR2/PEF thumbnails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
At first open of Before/After the two window jobs were asked for together, each
decoded its own 24 MP copy of the original (a review saw two decodes and three
uploads for one photo) and the shared device copy was swapped between them. The
Before's window now waits until the After's job has handed the original to the
session (region::defer_before_window, Session media has_source); later windows
of both share the one copy.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Review findings: window growth for spots was capped silently and then rendered
wrongly; Auto Mask growth took the whole stroke's bounding box; hidden masks grew
windows; the wasm window memory cap was not enforced. window_for_reads_checked
returns None when what a window reads would need more than 8192 px (4096 on
wasm) along an axis, Session::region_job returns None then (the loupe keeps the
whole-frame render), Auto Mask growth is per dab near the request (once, not
chained along the stroke) and ignores hidden masks. Docs say what the limits are.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
An adversarial review found that sizing the loupe render from the cropped frame
(previous commit) left the source level chosen from the output edge alone: a
crop whose own long edge is under 2560 px was drawn from the 2560 px preview of
the whole photo, soft though sized right. The level now follows the pixels the
output needs along the source's long edge (output edge / crop fraction); grid
thumbnails keep their cheap level.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Session::region_job renders one PixelWindow of the loupe's frame from the source
level that frame size needs, with a key of its own and no cache writes.
ui-egui::region decides when a window is needed (the whole-frame render is
stretched) and which one: the visible pixels plus a margin, snapped to a 256 px
grid so small pans reuse the render, bounded in size, clamped into the frame.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The import probe of a non-raw image decoded it (at a 64 px fit, which for
JPEG still entropy-decodes every block and for PNG inflates everything)
only to learn its stored size and orientation: ~95 % of import CPU.
lightcraft-codecs gets `read_header(bytes) -> Header { format, width,
height, orientation }`: JPEG from its markers (EXIF orientation), PNG from
its chunks (IHDR, eXIf anywhere), TIFF from the first IFD (tiff crate,
no strips read), WebP from its RIFF chunks / bitstream header (image-webp),
PSD from its header and image resources. GIF, BMP and JPEG XL keep the
small decode. `files::probe_bytes` uses it; raw handling is unchanged.
The TIFF colour-layout check is shared with the decoder (`layout`).
Measured (release, 4 cores, throwaway benchmark, per file, bytes in
memory): 200 generated 4000x3000 JPEGs (3.6 MB): 72.7 ms -> 2.1 ms
(read_header alone 1.05 ms; the rest is the content hash and metadata);
20 PNGs (30.8 MB): 236-265 ms -> 9.0-9.6 ms.
Corrupt files (behaviour note): the header readers also refuse what a
decode refuses before the pixels (unsupported layout, compression, frame
type, bad IHDR, ...) and truncated files: a JPEG whose markers don't reach
its EOI, a PNG cut before the chunk after its IDAT run, TIFF strips/tiles
that start past the end, a WebP image chunk or PSD merged data past the
end. So truncated files (interrupted copies, partial downloads) are still
marked `error` in the import review, as before; tests check that whenever
the old decode accepted a (cut or byte-mutated) file the header agrees.
Changed: damage *inside* compressed data that is all present (flipped or
garbled bytes) was refused at scan and is now imported, and shows as
unreadable ("!" in the grid) when rendered. Also: tiny JPEGs (< 128 px)
were decoded leniently by the old probe, so a truncated one imported; it
is now refused. A TIFF truncated inside its last strip is not detected
(StripByteCounts are often overstated, so only strip starts are checked).
Tests: header readers vs decode on generated JPEG/PNG/TIFF/WebP/PSD/BMP
with and without EXIF/TIFF orientation; truncations and random mutations
agree with decode; hostile headers (zero/absurd sizes, bad lengths,
truncation, garbage) are errors; read_header added to the fuzz tests;
probe_bytes oriented dims match the decode-based values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Root cause (in 0.2.1 and still on main): files and folders named on the
command line were imported from the eframe app-creator closure with
`app.run("library.import", …)`, which runs the engine command synchronously:
`import::expand` walked the folder recursively (one `is_dir()` open per entry,
no depth or count bound, following links) and probed every file before the
first frame could be drawn. An argument that resolves to a drive root (`.` or
`..` with a launcher's working folder at `C:\`, `/` or `\` on Windows) or to
the home folder therefore walked the whole drive with the window stuck as a
black "not responding" box. The library-problem banner's pending import had
the same synchronous call. Every other recursive walk (Local's Include
Subfolders, Find Missing Photos, preset and LUT folders, MCP) was also
unbounded, which is the "Local folders with subfolders: not responding"
pattern of filmcraft#23, and a link loop recursed until the stack overflowed.
- engine `walk::files_in`: one bounded, iterative walker (32 folder levels,
1,000,000 entries; `Walked::truncated` says it stopped), folder or file
taken from the directory listing (no open per entry), links and junctions
to a folder followed once. `import::expand` (+ `expand_within`), preset and
LUT folder expansion and MCP `expand_paths` use it.
- engine `import::launch_path`: an empty launch argument is ignored; a
relative one is resolved against the working folder; a drive or file-system
root becomes its memory card's DCIM folder or is refused, and so is the home
folder (a notice says why and to use File > Import Photos).
- desktop: launch arguments go through it and are imported with
`import::start_paths` (the import worker), like dropped files; so does the
library-problem banner's pending import.
Not verified on Windows (no machine here). The report says PhotoCraft 0.5.0
and `--memory` hang the same way with no arguments; nothing in LightCraft
walks the disk at startup without arguments (strace of a headless demo run
with HOME=/ and cwd /: no recursive listing), so that part may be outside
this code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Import -> Copy (and Move, and Copy as DNG) handled one file after another
on the import worker: copy, fsync, read back and hash, optionally decode
and re-encode the raw as DNG. Every other CPU-heavy step of an import was
already parallel (the probes, up to 8 threads), so with the probes cached
by the review dialog's scan the transfer phase ran on one core.
ImportJob::prepare_files now plans each file in order, as before
(duplicates by path and content, sidecars, rename sequence numbers,
folders, Kept notes) and collects the copies/moves, which then run on up
to 8 threads (std:🧵:scope; sequential on wasm32). Outcomes keep
their places, so results, order, names and failure messages are those of
a one-by-one import:
- a file whose content matches a transfer still pending, or whose name
could collide with one (same folder, same name family: IMG.jpg,
IMG-1.jpg, img.dng), waits until that one has finished;
- cancel stops before the next file; transfers not started leave no item;
- a panic in one transfer fails that file instead of the batch;
- Copy as DNG holds a memory-gate permit (6x the file size) while it runs.
Copy verification and crash safety are unchanged (same copy_new / place).
The desktop's import worker prepares batches of 2 x workers files (8..16,
lightcraft_engine::import::batch_size) instead of 8, so a batch's slowest
file holds back fewer threads; the browser build keeps 8.
Measured (4-core shared VM, 200 procedural 3.7 MB JPEGs = 754 MB, warm
page cache, throwaway benchmark not committed):
- probe: ~80 ms CPU per file is the JPEG decode (DCT-scaled to 64 px),
1.2 ms the content hash; the dialog's scan: 4.4 s, 3.6 cores busy.
- Copy, probes cached: copy+fsync+verify 1.59 s at 0.43 cores before,
0.94 s at 0.81 cores after. Copy, not cached: 6.45 s -> 5.51 s.
- Add, probes cached: 2 ms prepare; nothing to parallelize.
- commit of a batch on the UI thread (journal append + fsync): ~4 ms,
flat for libraries of 0, 5k, 20k and 50k photos (~0.7 s for 1300).
Copy as DNG could not be measured (no raw corpus here); it is the most
CPU-heavy per-file step and was sequential.
Test: copies_run_side_by_side_with_the_same_outcome (copies under the
test fault Slow run on more than one thread; names, order and in-batch
duplicates match a one-by-one copy; the outcome assertions also pass on
the old code, the thread assertion fails there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Found running cargo xtask ci with the corpus on Windows. The two changes
landed on the same day: the Fujifilm test (#282) expected the compressed
X-T20 file to keep the neutral fallback because its fit failed the gates
on all pixels (held-out RMS 0.114 against 0.10). The retry away from
edges (#263, issue #232) fits it (0.056), so the fit is accepted at both
sizes. Expect true.
follow_library_folder rebuilt the chosen subfolder from the lower-cased
folder_key on Windows and joined it with '/', so after a move the folder
shown in the sidebar came back as c:\archive\trip/day1 with its names in
lower case. Add folder_rest (compares by folder_key, returns the names as
spelled) and join them with the platform's separator. Tests compare
folders by identity where they only mean the same folder, and a new test
fails on Windows without the fix.
Folder import, drag and drop and MCP folder expansion skipped these extensions, so
the preview-only fallback for these containers was only reachable by naming a file.
Adds exactly the containers that now import as preview only to import::EXTENSIONS and
the headless PHOTO_EXTENSIONS. 3FR, FFF, DCR and STI still fail and stay out.
Widens the preview-only fallback. A recognised raw whose decode fails now falls back
to its embedded JPEG for any decode error (unsupported, corrupt, limit, TIFF
structure), not only an unsupported variant, and the preview search covers more
containers:
- Canon CRW, Minolta MRW and Sigma X3F are recognised by their magic (RawFormat
Crw, Mrw, X3f) instead of failing as "RawOther files are not supported yet".
- A TIFF whose IFD0 has no ImageWidth/ImageLength but a JPEG pointer or SubIFDs
(Kodak KDC) is a raw container, not a malformed image. TIFF compression 99
(Leaf MOS) counts as a raw compression.
- When no tag points to a preview, a recognised raw we cannot decode is scanned
for the largest complete three-component DCT JPEG. A preview whose first byte
was overwritten (Minolta, Epson) is restored. A one-component JPEG is skipped
(a PowerShot CRW stores its mosaic that way).
Files with no JPEG at all still fail with "without an embedded preview".
Phase One / Leaf IIQ, Canon EOS-1D / 1Ds and Kodak DCS TIFFs keep their raw data in
a private block. IFD0 is only a 160-640 px RGB copy and no IFD is marked as raw, so
they opened as an ordinary TIFF of that size (a 150 MP file rendered 296x220) with
no preview-only label.
probe() now recognises such a file from its structure (OtherTiff): a picture at
least 4x larger than IFD0 in both directions is declared by a SubIFDs child, or by
Exif PixelXDimension/PixelYDimension together with enough bytes outside every IFD's
strips and tiles to hold it at one bit per pixel. decode() reports the sizes as the
reason. A raw we cannot decode now falls back to its embedded JPEG, else to the TIFF
reader's view of its first image, so it imports preview-only with that reason.
RENDER_CACHE_VERSION 12: these files render differently.
When catalog.lock can't be locked (a file system without locks, such as
some network shares), the library opens unprotected, as documented, but
the promised warning went only to the log. It is now the first of the
library's warnings: library.info lists it under settingsWarnings, the
app shows it once in its notices, and lightcraft-cli run / mcp print the
library's warnings on stderr (stdout stays results / protocol only). A
normally locked library shows none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Decode lossless CRX and version 0x100/0x200 C-RAW in portable Rust,
including sensor geometry, timed white balance and black/white levels.
Verify all sensor samples against six independent M50/R100/R8 references.
Any CR3 decode error falls back to the embedded JPEG, as CR3 files did
before this decoder. The full sensor buffer is allocated only after the
first plane decodes, and plane buffers grow row by row. Tile planes
decode in parallel with a windowed bit reader (24 MP: 424 -> 89 ms
lossless, 519 -> 138 ms C-RAW on an M4).
Add guarded CR3 camera-JPEG colour fitting with independent framing
validation, relative white balance and cache invalidation.
Validation: cargo xtask ci.
The pending counter was decremented when the job's guard dropped at the
end of the loop iteration, after the reply was sent, so a waiting caller
(CLI / MCP mask.add) could see the segmenter still busy right after its
answer arrived. Under a loaded test run that made
tests_segment::waiting_requests_with_a_damaged_model_are_errors fail on
assert!(!busy()). The guard is now dropped just before each reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
After an undo or redo that changed one photo (its edit, rating, flag,
label, metadata or versions), that photo becomes the active one, as in
Lightroom Classic, so the change is on screen instead of happening to a
photo out of sight. It joins the selection if it isn't in it; steps that
touch several photos, albums or files, and photos outside the current
view, leave the selection alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Daniel Voshart
Claude
midasdf
Exalted5373
Nathaniel Ledford
radialmonster
Adrian D'souza
Иван Лапочкин
BFlat