* fix(text): read a TrueType font without an encoding as WinAnsi (fixes#1468)
* fix(text): describe the WinAnsi reading by pdftotext's output
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A stamp placed on a page with /Rotate was drawn in user space, so the
label or picture turned with the page. Counterrotate the appearance so
it reads upright as the page is displayed.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- Create PDF detects BigTIFF (II+/MM+) as well as classic TIFF; the tiff
decoder already reads it, so these scans now convert instead of being
refused.
- Image detection accepts only GIF87a/GIF89a, the headers conversion
decodes, so a malformed GIF header is no longer called an image and then
rejected with a misleading error.
- file-format-parity.md: XDP split into XFA data import/export (shipped
under form.xfa-data) and opening .xdp as a document (none).
Tests: bigtiff_images_become_pages; malformed GIF headers in
source_kind_tells_pdfs_images_and_text_apart. Both fail without the fix.
Claude-Session: https://claude.ai/code/session_01F8DFYWkDyTnEcin9PNkUW5
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Flattening deleted a cloudy comment it could not draw, and a refused text-box restyle or resize left the new properties in the file. Arrow defaults were stored on plain lines. A custom match ending on a separator included the next glyph, and the vertical-text redaction error claimed an overlap it had not checked.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The declaration line was built from the PDF/A identification alone, so a
document that declares only PDF/UA-1 read "Declared conformance: none".
It now lists PDF/UA next to PDF/A, and still says none when neither is
declared. pdfa_dialog_shows_a_declared_pdfua fails before the change.
With the options dialog turned off, run_accessibility_check used the range
saved on an earlier, longer document as it was: a page past the end
selected no page, and the page rules came out Passed without looking at
anything. The range is now clamped to the active document's pages, as the
dialog already does. a_saved_page_range_past_the_document_still_checks_its_pages
fails before the change with Passed for Tagged content.
Layout::multiple(n) maps counts without a fixed grid to a near-square
grid (3 -> 2x2, 5 -> 3x2), but Layout::Multiple kept only the grid, so
layout() filled every cell: three per sheet put four pages on a sheet.
Layout::Multiple now carries per_sheet, capped by the grid; spare cells
stay blank and cut-stack piles use the same count. The doc_print tool
and the print dialog pass the count through.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Follow-up to #1420.
#1420 compares the bytes of each entry to tell a file added twice from a
different file with the same name and size. An image or text file is
converted to PDF each time it is added, with its own date, so those bytes
never match and the same .txt or image added twice was no longer flagged.
Each entry now keeps the file as it was added (the same bytes for a PDF,
the image or text otherwise), and that is what is compared.
Adds the_same_image_or_text_file_added_twice_is_a_duplicate in
combine_ui.rs, which fails before this change.
Some programs start the PDF reader with the path unquoted
(`pdfcraft.exe P:\Archive\00042A26 Contract.PDF`), so Windows splits it
into `P:\Archive\00042A26` and `Contract.PDF` and neither opens
("Couldn't read 00042A26: os error 2"). Acrobat accepts this. Rejoin
consecutive arguments when one names no file but it and the ones after it,
joined with a space, do (longest run first); everything else is kept as
given. Done before the single-instance hand-off, so files sent to a running
PdfCraft are rejoined too.
Co-authored-by: magdale76 <16279778+magdale76@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
ui.move refuses a coordinate that isn't finite once narrowed to a
pointer position; ui.click {x, y} and ui.drag did not, so 1e39 became
an infinite position and was queued. With debug assertions on, the
next idle frame panicked in emath comparing NaN vectors.
Both now refuse such a coordinate with an error, as ui.move does, and
ui.drag also refuses ends too far apart for the way between them to
stay finite.
Adds click_and_drag_refuse_coordinates_that_overflow_like_move in
tests/control.rs, which panics before this change.
Rules skipped in the accessibility results were kept in one set for
the whole app, and every check applied it. With the options dialog
turned off, skipping Tagged PDF in one document made the next
document's check report it as Skipped, its findings cleared, in the
panel and the saved report.
The set is now keyed by document: Skip Rule records the rule for the
document whose report is shown, and a check applies only that
document's skips. Start Checking in the options dialog still starts
over, for the document it checks only.
Adds a_rule_skipped_in_one_document_is_not_skipped_in_another in
tests/accessibility.rs, which fails before this change.
Use a session-wide byte-accounted LRU instead of retaining every visited
page. Share the renderer's PageText Arc without cloning all glyphs and
avoid retaining obsolete document bytes through the cache.
Preserve per-page extraction results so text_find can continue after a
failed page, reporting bounded warnings alongside readable matches and
normal continuation cursors. Other text consumers retain strict errors.
Add deterministic coverage for cache budgets across documents, eviction,
revision changes, close, partial searches and bounded warnings.
Fixes#1483.
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
`set_info` changed only `/Info`. Files that carry XMP (LibreOffice and Word
exports, PDF/A) kept the old dc:title and dc:creator, so viewers that read
XMP first kept showing the old title, and PDF/A preflight reported the two
as different (6.6.3).
The matching XMP property (Title dc:title, Author dc:creator, Subject
dc:description, Keywords pdf:Keywords, Creator xmp:CreatorTool, Producer
pdf:Producer) is now replaced where it stands, added in a description of
its own, or removed with an empty value. The packet is edited as text and
the rest of it stays byte for byte; files without XMP get none, and a
packet that isn't UTF-8 is left as it was.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Follow-up to #1259. Before a connection authenticates, the control server
read request lines with BufRead::lines, which buffers a whole line before
anything looks at it, so a client that never sends `auth` could make it
buffer an arbitrarily long line.
Read lines with a bounded read instead. Until `auth` succeeds a line may be
at most MAX_AUTH_LINE (4 KiB; the auth request is about a hundred bytes);
a longer one gets a -32600 error and the connection is closed, after
reading at most MAX_AUTH_LINE + 1 bytes of it. After `auth`, lines are read
whole as before. End of stream, read errors and non-UTF-8 input end the
connection as they did with BufRead::lines.
Tests: lines_are_read_up_to_the_limit, an_overlong_line_before_auth_is_refused,
long_lines_after_auth_are_still_read.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M8: redaction unlinks removed images and forms from inherited and shared resources
Apply Redactions and Remove Hidden Information give a rewritten page its own
pruned /Resources, but the dictionary the page drew through before could still
name the image or form that was removed:
- a /Resources inherited from a /Pages node;
- one resource dictionary object shared by several pages;
- the page's own dictionary, when a form without /Resources drew the image
through it.
A full-rewrite save keeps whatever is still referenced, so the removed image
samples and form text stayed in the saved file while the operation reported
success. Per-page resources (the case fixed in #1099) were not affected.
The interpreter now records the original object behind every XObject it drops
or replaces. After the page loop, each page-tree resource dictionary that still
names one loses that entry unless a page drawing through that dictionary still
draws the name (the same image on another page, or again outside a mark). A
dictionary that loses an entry is replaced by a private copy on its node, so a
dictionary object shared with other nodes is left alone for them. If a page's
use of a name cannot be told (unreadable content, a form that will not decode),
the operation fails closed.
Tests: redacted_xobjects_do_not_survive_through_inherited_or_shared_resources,
an_image_another_page_still_draws_through_the_same_resources_is_kept,
an_image_a_form_drew_through_the_pages_resources_does_not_survive,
a_hidden_layers_image_does_not_survive_through_inherited_resources.
Not covered here: originals named by a form XObject's own /Resources, by an
annotation appearance or by a pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M9: a cross-reference entry the reader sets aside is never an unchanged signed object
The reader that judges post-signing changes and the renderer that draws the
page resolve some cross-reference entries differently. A revision appended
after signing could redefine a page's content stream and give the object an
entry the reader sets aside while the renderer follows it:
- an in-use entry at offset 0 (the reader skips it; the renderer fails to read
the object there, rebuilds its index and takes the last definition);
- a second entry for the same object in one section (the reader keeps the
first, the renderer the last).
The classifier compared the signed object with itself, found nothing changed
and reported the signature Valid while the page showed the new content.
pdfcraft-cos now records the entries it does not take at face value
(Document::xref_oddities: offset-0 in-use entries other than object 0,
duplicate entries that differ, reserved cross-reference stream types, and a
hybrid /XRefStm entry that disagrees with the table), and can say whether an
entry locates the object itself (Document::xref_entry_is_exact). What it
resolves is unchanged.
classify_changes treats any such entry added after the signed revision as a
change that is never permitted (page content when the object was a signed page
or its content, other changes otherwise). An object whose content compares
equal at a new place is unchanged only when its entry is exact: where the
reader had to search for the object, another reader may arrive elsewhere.
Tests: a_cross_reference_entry_the_reader_sets_aside_does_not_hide_new_page_content,
a_cross_reference_entry_that_misses_its_object_is_not_an_unchanged_object,
cross_reference_entries_that_are_set_aside_are_recorded,
an_entry_that_misses_its_object_is_found_by_searching_but_is_not_exact.
This closes the two demonstrated triggers and their near variants. It does not
prove that the two parsers agree on every file: other differences in what each
tolerates may remain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M8: Apply Redactions is refused when the page still shows text under a mark
Redaction decides what lies under a mark from the positions its own
interpreter computes, and its verify pass reuses them. Where those differ from
the renderer's, a mark drawn over the text as displayed lies over glyphs the
interpreter places elsewhere, or does not see at all: they stayed in the file
and the operation reported success.
The case the test pins: a font and size set through an ExtGState /Font entry
(`gs`), which the renderer honours and the interpreter does not model. The same
kind of gap was observed for a font a form XObject takes from its caller, for
some predefined CMaps and for a rotated Type 3 font matrix. The standard-14
width error that first showed it is fixed at its root by d0d1ad81.
The engine now asks the renderer, which is what the user saw when placing the
marks. After redaction runs, the result is written as a save would write it
(without the marks' own overlay), its text is extracted, and a glyph still at
least half inside a mark fails the edit with the existing "could not be
verified" error. The edit runs on a copy, so the document is unchanged. A page
whose text cannot be read back fails the same way.
This makes such mismatches fail closed; it does not make those documents
redactable. Teaching the interpreter each of them is separate work.
Test: redaction_is_refused_when_the_page_still_shows_text_under_a_mark (the
line whose font is set by `gs` is refused and left unchanged; the same line set
with `Tf` is redacted).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
wgpu validates indirect draw and dispatch arguments with a compute shader it
compiles when the device is created. Metal on an Intel Iris Pro (MacBookPro11,3,
macOS 12.7.6) fails to compile it ("Compiler encountered an internal error" in
MTLCompilerService), the device is lost, and the window falls back to OpenGL.
PdfCraft draws and dispatches nothing indirectly, so leave the check out of the
instance flags. WGPU_VALIDATION_INDIRECT_CALL=1 turns it back on. VectorCraft
does the same (storytold/vectorcraft#651).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On macOS sync_all is F_FULLFSYNC, which SMB and FUSE volumes such as a mounted Cryptomator vault refuse with ENOTSUP or ENOTTY, so every save there failed. Those two errors now fall back to fsync; any other flush error still fails the save.
* fix(edit): move existing text by its frame, and selections with the arrow keys (fixes#1520)
* docs(parity): arrow-key nudging and the paragraph frame are no longer gaps (#1520)
Two follow-ups the maintainer asked for after #1355.
The script session's worker now says when the engine is ready for the
script it was sent (its JavaScript context built; FormCalc at once),
and the script's time limit runs from then, with the engine's own
start limit before it, as the one-shot path always did: building a
context is not charged to the script, which matters on a busy machine.
A field inside an area shares its data node with a field of the same
name outside it (areas are left out of data paths). The in-place
refresh of the live form now follows the data path through the tree
and gives every field bound to the node the value the tree builder
would, each by its own template field (an exclusion group there means
a rebuild), and the engine's value setter, with an index of widgets by
data node, gives every widget bound to the node the value by its own
kind, hidden fields included, writing the data whenever the node's
text differs. The script's time now also starts after its host and
globals are set up. A stale parity note (choosing a picture for an
image field, delivered in #1175) is removed.
The launcher installs and updates PdfCraft with `msiexec /passive` and no properties, so
INSTALLDESKTOPSHORTCUT always took its default of 1 and every update put the shortcut back,
even for users who had deleted it. The property no longer has a static default: a SetProperty
after AppSearch turns it on for a first install, and for an update only while PdfCraft.lnk is
still on the all-users desktop. A value on the command line still wins, and the full-UI
checkbox still starts ticked on a first install.
test-msi.ps1 checks the action runs after AppSearch in both sequences and evaluates its
condition for first installs, updates with and without the shortcut, and
INSTALLDESKTOPSHORTCUT=0.
A build compiled with PDFCRAFT_BUILD_LABEL=<label> shows "0.7.1 (<label>)"
in `pdfcraft --version`, `pdfcraft-cli --version`, Help > About and the
first log line (pdfcraft_engine::build_info). The version itself is
unchanged, so the update check, the MCP server info and the User-Agent
still carry the release version.
packaging/linux/package.sh puts the label in the file names
(pdfcraft-0.7.1-<label>-linux-x86_64.rpm) and makes the .rpm/.deb release
`1.<label>` (nfpm `release: ${RELEASE}`, 1 when unlabelled). rpm sorts
0.7.1-1.<label> after 0.7.1-1 and before 0.7.2-1, so a locally built
package upgrades over the installed release and the next release replaces
it. packaging/env.sh accepts only letters, digits and inner dots, which
are valid in both rpm and deb release fields.
Unlabelled builds are unchanged.
Made with Claude Code (Claude Opus 5.5, medium effort). It passes the
workspace quality gates (fmt, clippy, cargo test --workspace, xtask assets)
and was checked by hand on Fedora 44, but it has not been exhaustively
regression tested.
Co-authored-by: bmh129 <11478682+bmh129@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two language additions each edited the "Auto follows the system
language" paragraph, and both versions ended up in the file: one
mentioned Turkish, the other Slovenian, and neither mentioned both.
Keep one paragraph that lists both.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(audit): a rectangle drawn as an m/l path is a cover like re (fixes#1510)
* docs(parity): a rectangle drawn as an m/l path counts as a cover (#1510)
* Allow mouse-wheel scrolling during text selection
* Keep wheel-scrolling a selection drag over the page gap and the next page (#721)
Move the wheel handling out of the per-page drag branch to after the page
loop, gated on the pointer being over the document area (like #759), so it
no longer stops once the pointer leaves the selection's page.
Co-authored-by: Waleed <waleedalw123@gmail.com>
---------
Co-authored-by: Waleed <waleedalw123@gmail.com>
* fix(ui): dragged added text follows the pointer before release (fixes#1488)
* fix(ui): keep a moved item in place until the page is redrawn (fixes#1488)
Mex
srt8hellcat2-ui
Marco Arnulfo
Yousef Mojahid
Márk Bartalos
Raj Patel
Earl Co
Filip Pranklin
magdale76
Sir Clangington III.
Alex
SteamSmith
FredApps
Jeremy Yao
Fabian Grajales
Umberto Cimmino
ysrdevs
MarekSpodBiedry
pauliusiv123-rgb
Jason Brashear
bmh129
Mahmud Emre BAŞPEHLİVAN
cyfung1031