Six raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::texture), under a new Effect › Texture
submenu between Sharpen and Video in the Raster Effects section:
- Craquelure (crackSpacing pt 2..100, default 15; crackDepth 0..10, 6;
crackBrightness 0..10, 9): the object on relief plaster that cracks into
plates about Crack Spacing apart (a Voronoi network over jittered points)
and along the quarter, half and three-quarter contours of its softened
tones. Depth sets how dark and wide the cracks are and how high the
plates' bevels and the tones stand (lit from the top left); Brightness
how brightly the surface is lit.
- Grain (intensity 0..100, 40; contrast 0..100, 50 = unchanged; grainType
Regular, Soft, Sprinkles, Clumped, Contrasty, Enlarged, Stippled,
Horizontal, Vertical, Speckle; default Regular): coloured 1-point grains,
smooth ones, clumps, 2-point grains, streaks along rows or columns, dark
specks; Sprinkles and Stippled use the background colour, white.
- Mosaic Tiles (tileSize pt 2..100, 12; groutWidth 1..15, 3; lightenGrout
0..10, 9): irregular tiles bevelled at their edges, with sunken grout half
a point wide per step, lightened as Lighten Grout says.
- Patchwork (squareSize pt 0..10, 4; relief 0..25, 8): squares filled with
the colour around their centres, raised to heights that follow the
highlights and shadows, a little more or less at random.
- Stained Glass (cellSize pt 2..50, 10; borderThickness 1..20, 4;
lightIntensity 0..10, 3): single-coloured panes leaded in the foreground
colour (black, half a point per step), lit from behind at the object's
centre and fading out towards its corners (PixelSpace gains `extent`).
- Texturizer (texture Brick, Burlap, Canvas, Sandstone, default Canvas;
scaling % 50..200, 100; relief 0..50, 4; lightDirection Bottom, Bottom
Left, Left, Top Left, Top, Top Right, Right, Bottom Right, default Top;
invert): the object on a surface in relief. The four surfaces are height
fields generated in code (bricks in stretcher bond, plain weaves coarse
and fine, octaves of smooth noise); no image files. Load Texture is left
out.
Every pattern lies in document space around the object's centre, so the
result is the same at any zoom or raster resolution, moves with the object
and is identical on every redraw (hash noise of cell indices); slopes are
taken in document units. Work per pixel is bounded (a 5 x 5 cell search,
four or five height samples, box blurs); parameters are clamped to their
ranges and finite-checked. The Pixelate helpers (Place, the cell search,
the softened colours) are shared, Mezzotint uses the shared smooth noise,
and the effect dialogs' dropdowns translate their labels in an "effect"
context where the plain word means something else (Soft, Horizontal and
Vertical are type settings in Japanese and Chinese).
Catalogue rows with parameter docs, outsets and reaches, menu entries,
dropdowns (Grain Type, Texture, Light Direction), translations, tests
(parameters and clamping, cracks and contours, ten distinct grains, tiles
and grout, squares in relief, leaded panes and the centre light, the
textures lit and inverted, the same at twice the resolution and when
moved, canvas, multithreaded, PDF and SVG, the command sweep with junk
parameters, the dialogs and the menu) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A graph's data can now hold blank cells: an empty CSV cell, a null in
`rows` (any cell that isn't a finite number), the rest of a short row,
or a row that has only a label.
- Columns, bars and stacked segments leave a blank cell out instead of
drawing a zero-height mark.
- Line and scatter graphs break their lines around it and draw no
marker there; the value axis ignores it.
- Area, pie and radar graphs draw it as 0, which is what it adds to
them.
The help pages don't describe blank cells, so this is our own choice:
a cell with no value has nothing to draw, which also matches how a
series with a missing year reads in a report.
In the file a blank cell keeps a 0 in `rows` and is listed in a new
`blanks` field ([category, series] pairs, written only when there are
any). A version that doesn't know blanks ignores the field and reads
the zeros, so files still open there, and files without blanks are
unchanged.
A number in straight quotes is a label, as the help page on graph
labels says (a year as a category name, for one). The CSV reader used
to strip the quotes first and read it as a value. Label columns are now
decided for the whole column: once any row starts with a label, every
row's first cell is its label, so a row with an empty label no longer
shifts its values one place left. The data window writes a header row,
labels that are empty, read as numbers or have spaces around them in
quotes, and blanks as empty cells, so they come back as they were.
graph.setData {} returns blanks in `rows` as null, so the rows it
returns can be edited and sent back. A label-only row keeps its place
with blank values; a row with neither a value nor a label is dropped,
and a first row that is a label followed by empty cells (`Year,,`) is
still read as a header with no series names.
The data grid is built in full for drawing and for the data window, so
it now stops at 10,000 categories of 256 series, which keeps a file
with one very long row from allocating without bound.
Behaviour (quoted labels): Add graph labels and data sets:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-labels-and-data-sets.html
Double-clicking a Scatter, Art or Pattern brush in the Brushes panel (or the
panel menu's Brush Options...) now opens its options dialog, as Calligraphic
and Bristle brushes already did. OK runs brush.options and every stroke
painted with the brush redraws.
- Scatter Brush Options: Name; Size (10-1000 %), Spacing (10-10000 %),
Scatter (-1000-1000 %) and Rotation (-180-180 deg), each Fixed (the first
value), Random (between the two values) or Pressure (the first value at
the lightest pen pressure, the second at the heaviest); Rotation relative
to Page or Path. Scatter brushes now keep these modes (`modes`); brushes
saved before keep their look (Random where the two values differ).
- Art Brush Options: Name; Width (1-1000 %); Scale Proportionately, Stretch
to Fit Stroke Length or Stretch Between Guides with the guides' Start and
End (% of the art length); the four Directions; Flip Along and Across.
- Pattern Brush Options: Name; Scale (1-10000 %), Spacing (0-10000 %); the
five tiles (Outer Corner, Side, Inner Corner, Start, End) drawn with their
art or None; Flip Along and Across; Stretch to fit, Add space to fit or
Approximate path.
- All three: Colorization (None, Tints, Tints and Shades, Hue Shift with its
Key Color picked from the art's colours, the most used one by default) and
a live preview of a stroke painted with the edited brush.
Brush definitions from files and commands are now kept within these ranges
(Brush::sanitize, also for Calligraphic and Bristle values); unknown modes,
directions, fits or colorization methods are refused. The brush.options and
ui.brushOptions docs list the new params and fields. Tests: the brush model
(modes, pressure, sanitizing, art colours), engine params reaching the
brush and strokes redrawing, junk params in command_sweep, and headless
dialog tests for each dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New line graphs put their points at the centres of their categories, the
option's default in the reference app; graphs saved before the option
existed were drawn edge to edge and keep it (a field default of its own).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Line graphs take the Edge-to-Edge Lines option (`edgeToEdge` on
graph.setType). On, the lines run across the whole plot, which is how
they always drew and stays the default, so existing graphs and files
look the same. Off, the points sit at the centres of their categories,
like the columns of a column graph, so a line graph lines up with a
column graph of the same size. The page describes only what the option
does when on; the off position is its opposite.
Radar graphs drew their ring and markers whatever Mark Data Points and
Connect Data Points said. They now follow both, like line and scatter
graphs.
Behaviour: Format columns, bars, and lines, Graph Type options for
line, scatter and radar graphs (Mark Data Points, Edge-to-Edge Lines,
Connect Data Points):
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-columns-bars-and-lines.html
The corner widgets only showed when the selection was exactly one path.
Now every selected path that has them shows its widgets: live rectangles
and polygons with the Selection tool, any path with Direct Selection,
each with its own corners (all of a path selected whole, the
Direct-Selected ones otherwise). Dragging any widget rounds every shown
corner of every path in one step, Alt-click cycles their kind, and the
red limit outline covers them all; a double-click opens Corners for the
path it was on. Each widget is drawn in its own layer's colour.
object.setLiveShape takes items: [{id, corners?}], several objects each
with its own corners, which the drag sends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Search: a search field at the top of the Libraries panel filters the
current library's colours, character and paragraph styles and graphics
by name, ignoring case; groups without a match are hidden, groups with
one open, and a search nothing matches says so ("No results").
Groups: items can be put in user-named groups, kept in the library file
(`groups: [{name, items: [{kind, item}]}]`, left out when there are
none, so files written before groups load as they are). New commands:
library.createGroup {library?, name?, items?}, library.renameGroup
{library?, group, name}, library.deleteGroup {library?, group} (its
items stay, ungrouped) and library.moveItem {library?, kind, item,
group?}. An item is in one group at most; deleting an item takes it out
of its group. The panel shows each group as a collapsible section with
its item count after the ungrouped items (rename and delete on its
context menu), each item's context menu has Move to Group (No Group,
the groups, New Group...), and a New Group button sits in the footer.
library.get lists the groups, library.list counts them. The generic
command dialog takes fixed params in `__params` for this.
Export / import: library.export {library?, path?} writes a library
(colours, styles, graphics with art and thumbnails, groups) as a
.vclibrary file, the JSON the library folder keeps (without a path:
{data}); library.import {path | data | dataBase64, name?} adds one as a
new library, made current, numbered on a name clash ("Brand (2)").
The panel menu has Import Library... and Export Library..., through the
app's file dialogs (the web downloads, and picks through File > Open,
which now lists Libraries files). Imported and folder files are made
safe: at most 10,000 items of a kind and 1,000 groups, names clipped and
made unique, sizes finite, thumbnails kept only when their PNG header
says at most 1024 px a side, group entries naming missing items or
unknown kinds dropped; a file over 512 MB or that isn't a library is an
error. Paths go through the engine's file helpers (automation roots).
The importer is fuzzed (import_fuzz: garbage and mutated libraries).
Also fixed: the third graphic added to a library got the second's id
(`graphic-2` twice).
Docs: the commands' params docs, docs/mcp.md, ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds the Video group to the raster effects, after Sharpen:
- De-Interlace…: Eliminate Odd or Even Fields, Create New Fields by
Duplication or Interpolation. The fields are the rows of the document's
raster grid (Document Raster Effects Settings › Resolution, carried to
the filters as PixelSpace::line) counted from the top of the page, so
the result is the same at any zoom and moves with the page. A line
taken out copies the line above (the one below at the top), or takes
the average of the two.
- NTSC Colors (no options, applied at once): colours a composite
television signal can't carry, with luma plus chroma past 110 % of white
or luma minus chroma below -20 % in YIQ, have their chroma cut to fit,
keeping their luma. Saturated yellow, cyan and pure red lose some
saturation; legal colours stay as they are.
Catalogue rows with parameter docs, dialog dropdowns, menu, translations,
tests (effects, canvas, command sweep junk, menu) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File › Place and File › Open read PSD and PSB files: the merged image
every such document carries after its layers, which is what a linked PSD
shows. A placed PSD links like any image, so the Links panel updates and
relinks it, and it is sized by its ResolutionInfo resource.
The reader is written from the public file format specification. It
reads Bitmap, Grayscale, Duotone, Indexed, RGB, CMYK (through the colour
settings' CMYK) and Lab, at 1, 8, 16 and 32 bits per channel (32-bit
values are linear), raw, PackBits or zipped with or without prediction.
A document with transparency stores its merged image on white with the
alpha in the first extra channel. It comes back with straight colours,
also for 16- and 32-bit files, which say so in their Lr16/Lr32 block.
Multichannel files are refused with a message. The file is untrusted:
every read is bounds-checked and the image's size is checked against
the decode budget before anything is allocated.
PSB is a read-only format of its own, so exports never write a PSD under
a .psb name. The desktop packaging still doesn't associate either
extension with VectorCraft (UNASSOCIATED_EXTS): they belong to raster
editors. Layers (import options) are left for later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With both axisMin and axisMax set, the value axis now runs exactly from
one to the other, split into the tick count (5 when automatic). Before,
the override went through the same rounding as the calculated axis, so
asking for 0 to 12000 drew 0 to 12500 and the columns came out shorter
than the data. With only one bound set the axis is still calculated
around the data, as before.
Ticks are now counted from the minimum instead of added up, so the last
tick lands on the maximum (an offset range like 1e10..1e10+1 lost it to
rounding) and a step too small for the range can't loop forever. An
override too wide for f64 used to give a NaN axis and an internal error
in graph.setType ("min > max, or either was NaN"); it now falls back to
the calculated axis.
graph.setType {} also reports axisMin and axisMax.
Behaviour: Change graph value axes, Tick Values > Override Calculated
Values (minimum, maximum and divisions):
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/change-graph-value-axes.html
Four Photoshop-style raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::pixelate), under a new Effect › Pixelate
submenu between Blur and Sharpen in the Raster Effects section:
- Color Halftone (maxRadius 4..127, default 8; channel1..channel4 screen
angles -360..360, defaults 108/162/90/45): each colour channel is
screened at its angle in square cells sized so a dot of Max. Radius
fills one; each cell's dot covers the share of the cell that is the
channel's coverage-weighted mean there (white stays white, black
black). RGB documents screen R, G, B (channels 1 to 3); CMYK documents
screen C, M, Y, K inks (channels 1 to 4), also when they are drawn ink
plane by ink plane (the K plane uses channel 4).
- Crystallize (cellSize 3..300, default 10): every pixel takes the
colour at the nearest of one jittered point per cell (exact Voronoi
over a 5 x 5 neighbourhood, pruned by distance).
- Mezzotint (type: Fine/Medium/Grainy/Coarse Dots, Short/Medium/Long
Lines, Short/Medium/Long Strokes; default Fine Dots; a dropdown in the
dialog): each channel is turned fully on or off against its own random
threshold pattern, so the object becomes pure colours.
- Pointillize (cellSize 3..300, default 5): one dot of random size per
cell at a jittered point, coloured by the softened object there and as
opaque as the object at its centre, stacked in random order over a
white canvas where the object is.
Lengths are in points (Scale Strokes & Effects scales them) and every
pattern lies in document space around the object's centre, so the
result is the same at any zoom or raster resolution, moves with the
object, and is identical on every redraw (hash noise of the pattern's
cell indices, no state). Work per pixel is bounded whatever the
parameters, which are clamped to their ranges and finite-checked; the
halftone's cell grid is capped by the raster's size and a screen finer
than 3 pixels leaves the image as it is (its average). PixelSpace gains
`channels` so the renderer tells the filters what the channels hold.
Catalogue rows with parameter docs, outsets and reaches for cropping,
menu entries, dialog labels (Max. Radius, Channel 1-4, Cell Size), the
Mezzotint Type dropdown, translations, and tests: parameters and
clamping, tone and coverage, CMYK inks, polygon crystals, pure-colour
mezzotints with ten distinct patterns, dots on a white canvas, the same
result at twice the resolution and when moved, the canvas, PDF and SVG
through the engine, the command sweep with junk parameters, the dialogs
and the menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Painting looked up each selected object's graph by walking up through
parent_of, a search of the whole document per level, so a fill or stroke
change on a large selection grew with the square of the document. The
series art of every graph is now mapped in one pass, and documents with
no graph skip the lookup.
A series index comes from the file: one past the graph's series grew the
graph's series paints to that length. Such a group is no longer taken
for a series.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Group Selection's fill and stroke on a graph series are kept on the graph,
separately per series, and reapplied when its data, type or size changes,
and through save, open and undo.
vectorcraft-cli mcp and vectorcraft --control take the flags PhotoCraft
takes. While roots are in force, every path a command reads (open, place,
relink, SVG image links, library and profile loads, plug-ins, preset
imports, font searches) must lie inside the read root and every path it
writes (save, export, package, Export for Screens and for Web, print to
file, captures, library saves) inside the write root. Paths are made
absolute, links are followed (a missing file's nearest folder's), and the
result is compared by whole components, ignoring case on Windows; `..`
below a missing folder, dangling links and device names are refused. A
root left out grants none of its access; without the flags nothing
changes.
The checks live in one place, vectorcraft_engine::file_access, consulted
by the engine's file helpers and the app's file services. The headless
server confines its whole process; the app confines control requests,
the frames carrying input they inject and the background saves they
start, leaving the person at the keyboard and the app's own folders
alone. The screenshot tool now has the backend write its file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selected live polygon now shows Illustrator's Polygon Properties in the
Transform panel and the Properties panel's Transform section: side count,
angle, corner type and radius, radius, side length and Make Sides Equal
(enabled once an uneven scale has made its sides differ). Before, only the
side count and corner radius were there.
object.setLiveShape takes polygonAngle (degrees counterclockwise),
polygonRadius and sideLength (points, centre to vertex / side) and
makeSidesEqual, which drops the uneven scale and shear and keeps the
polygon's centre, angle and mean radius. Each call is one undo step; a
radius or length that isn't a number above 0 is an error. A star stays a
plain path, as in Illustrator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking an object's target circle in the Layers panel always replaced
the selection, so several objects couldn't be picked there. Shift-click
now adds the object (a layer: its art) to the selection, or takes it out
when it is selected already, as in Illustrator; nothing stays targeted
then. layer.target takes add: true for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Select › Reselect repeated the last selection command, but a Select Same
command needs a selected object to compare with, so after Deselect it
failed with "nothing selected". Reselect now remembers the objects that
were selected when the command ran and, with nothing selected, takes the
reference from those still in the document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a brush in the Brushes panel (or the panel menu's Brush
Options…) opens its options. Calligraphic Brush Options: Angle,
Roundness and Size, each Fixed, Random or Pressure with its Variation,
over live previews of the nib and of a stroke. Bristle Brush Options:
Shape and the bristle sliders. OK runs brush.options; strokes painted
with the brush update.
The Paintbrush records the pen pressure along a stroke (path.freehand
takes [x, y, pressure] points), and a Calligraphic brush with Pressure
variation changes its nib along the stroke, from the value less the
variation at the lightest pressure to the value plus it at the heaviest.
Brushes saved before keep their Random variation. Pen pressure doesn't
reach the app on macOS yet (winit 0.30 reports none there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The renderer composited in 8-bit integers, so where a partly transparent
anti-aliased edge crossed opaque art (or a background colour) the result
came out at alpha 254 on some pixels, and PNG, TIFF and WebP files were
written with an alpha channel. Raster exports (and Save for Web) now
composite in floating point (vello_cpu's f32 pipeline, enabled as a
feature), offscreen groups, masks and patterns included; the canvas keeps
the faster 8-bit path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Curvature tool only edited the path it was drawing. It now edits any
selected path, whatever drew it, keeping its shape except where edited:
a click on a point makes it the current (direct-selected) point and a
drag moves it, re-curving only its two segments (the neighbours keep
their handle directions); Alt-click or double-click toggles it smooth or
corner and Delete removes it; a click on a segment adds a smooth point
without changing the shape, and a drag moves it in the same undo step.
With an end of an open path current, clicks go on from it (the old
segments keep their shape) and a click on the other end closes it.
The edits go through a new path.curvatureEdit command (move, insert,
extend, close), path.convertAnchor and path.removeAnchor, one undo step
each. The tool now claims Delete/Backspace while it has a point to
remove, so the key no longer deletes the whole path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A raster effect painted below its object (Drop Shadow, Outer Glow) is
written as an image under the object's vector art. The image was
rendered over nothing and placed with Normal blending, so a Screen glow
or a Multiply shadow came out as Normal in the PDF. Each image is now
composited with its effects' blend mode, one image per mode when an
object's shadows and glows use several.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A run (vectorcraft-cli run, the MCP command_batch tool) had no way to use
an id an earlier step returned. A parameter string that is exactly
$N.path or $last.path now takes that value from step N's result
(0-based), e.g. {"id":"$1.id"}; $$ starts a literal $, and a
reference to nothing fails the step. Objects given to a command are now
used as given: an ids element or id that isn't an object id (or an
unresolved reference) fails instead of the command acting on the
selection. text.setRangeStyle styles the selected type object when no
id is given, as text.setStyle does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color books such as the Pantone books a user owns (.acb) couldn't be
opened. They are now read (never written), from public descriptions of
the format: their RGB, CMYK or Lab colors, named with the book's prefix
and suffix ("PANTONE 185 C"), as spot colors unless the book marks
them as process colors, leaving out the pages' unnamed padding. They
open from Window › Swatch Libraries › Other Library…, File › Open and
the user library folder like .ase files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The dialog's W and H fields send decimal numbers (300.0) and the settings
wanted a whole u32, so the preview failed with "invalid type: floating
point". Pixel sizes now take any number and round it to whole pixels;
negative, huge and non-numeric sizes are still refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator EPS and .ai type is made whole from the file's text
document, shown or hidden: point type, area type (a story in several
frames as threaded type that flows when the file opens) and type on a
path, with its fonts, size, leading, tracking, scaling, baseline shift,
fill and stroke colours (grey, RGB or CMYK), alignment, indents and
paragraph spacing. The page's drawing of that type, often in pieces, is
left out; where the text document can't say, type that shows still
comes from the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The report kept a placed document's LINKED FILES and FONTS inside its parent's list. Each document
now gets its own sections, the packaged one first and unchanged (no Document: line), then each
placed document's, headed by its file. Drops a debug_assert and an unneeded mut, runs rustfmt, and
documents the nested packaging in docs/mcp.md and the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
package.rs: the collector takes main's font lookup (fonts found by any of their names, in the
version the type names, a missing style shown in its closest one, files named by packaged_name).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Fonts adds only files a folder search found.
- macOS declares .suit as the extension of a font suitcase
(com.apple.font-suitcase), and the font scan reads a suitcase
whatever its name. A search considered only suitcases without an
extension. It now also considers files whose extension is .suit, in
any letter case, and reads one only when it is a suitcase font.
- Add Fonts copies at most 256 MB a file. A search also read larger
font files, and a search that found one for a font could end before
it found a smaller copy. A search now skips font files over 256 MB.
Docs: docs/mcp.md.
When a document opens with fonts that aren't available, fonts used
only in its symbols included, VectorCraft lists them in a Missing
Fonts dialog after the missing linked file questions, one document at
a time, with Find Fonts and Close. Find Fonts opens Type › Find Font
on the first missing font of the layers' type, to replace it. After
Find Fonts or Close the dialog doesn't open again for that open; when
another dialog replaces it, it opens again once that dialog closes.
Search Fonts Folder (the Fonts folder File › Package writes next to
the document) and Find in Folder… search a folder and its subfolders
for the fonts' files, and Add Fonts copies the files the user chooses
into a Fonts folder next to the preferences. The desktop app and
vectorcraft-cli read that folder with the system's font folders. Type
› Find Font has a Find in Folder… button too when fonts the document
uses are missing. The web app shows no dialog; a status message says
how many fonts aren't available.
- text.missingFonts lists each missing family and style once,
whatever version the document's type names, and leaves out CSS
generic families such as sans-serif. text.findFontFiles searches a
folder on up to 8 threads and returns at once; text.findFontFiles {}
reports the search, and {stop: true} stops it. A search reads only
what the font scan reads of font files (their table directories and
name, fvar and OS/2 tables) and, on macOS, of suitcase fonts, and
lists a file for a font only when the file makes the font resolve
exactly. It does not enter app packages, the Program Files and
ProgramData folders, the system's folders at the root of a volume,
the Shared and Public folders in Users, a home folder's Library,
AppData, Applications, snap and dot folders, a Library folder's app
data folders or the folders the environment names for apps, and it
skips other hidden folders and does not follow links below the
picked folder. It ends after 60 s by default, after 10,000,000
entries listed, with more than 1,000,000 folders waiting, after
10,000 font files read or 1,000 kept, or once every font has a file;
Stop and Close end it too.
- text.addFontFiles copies only files the last search found. Of
those, it copies only regular .ttf, .otf, .ttc, .otc, .woff and
.woff2 files and suitcase fonts with their resource fork, at most
256 MB a file and 1 GB in all. It never replaces a file: a file with
the same contents is kept, and when another file has that name, the
copy gets a number (Name 2.otf). The fonts are then scanned again,
and type set in them redraws.
- ui.missingFontsDialog and ui.findFontsInFolder open the dialog for
agents; docs/control-protocol.md lists its fields.
- File › Package gives a font file whose name has no font extension
the extension that matches its data (.ttf, .otf or .ttc).
- vectorcraft-text adds set_app_font_dir, which system_font_dirs
reads, WantedFonts, which reads a font file's names as the font scan
does, is_font_file and is_suitcase. #762 split its face reader, which
now takes read budgets: file_face_names_within tries the suitcase
reader first, and reader_face_names_within applies the budgets to
each font. vectorcraft-format adds write_new_with.
Docs: docs/mcp.md, docs/control-protocol.md, ROADMAP.
- Fit to Artwork Bounds fits the art exports draw: hidden objects and
layers, guides and template layers don't count, and the bounds stop at
a layer's clip.
- The comparison with the page catches an object one draws that the
other doesn't (pixels whose neighbours all differ, away from type), a
light colour against white, and, for an EPS whose page is its art's
box, art the layers print outside it.
- textAs: outlines opens a .ai whose type shows from its PDF part, which
has the outlines.
- document.open takes editingData: false to open an Illustrator EPS or
.ai as its page or PDF part only, for print pipelines.
Part of #637.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The styles were stored on the text and written to SVG's text-decoration,
but the type was drawn without the lines. vectorcraft_text::decorations
now gives each underlined or struck-through stretch of a run on a line
its bar, placed and sized from the font's own underline and strikeout
metrics (with fallbacks for fonts that have none). The canvas, Create
Outlines, PDF export (outlined and real text) and SVG's outlined text
draw them in the run's paint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
swatch.library.copyToUser {library} copies a library loaded from
another folder into the user library folder of the desktop app. A
.vcswatches, .gpl or .ase file is copied as it is; the swatches of a
document and a library loaded from the data or dataBase64 parameter are
written as a .vcswatches file. The copy gets a name that no file in the
folder has, and when a file with the same extension and bytes is
already there, that file is used. The library is then listed as User
Defined only. Until the app quits, commands given its loaded id use the
copy, unless another library is loaded under that id. Without a user
library folder (the web and headless sessions) the command is disabled.
A file with the same extension and bytes as a User Defined library
opens as that User Defined library. The unchanged original of a copied
.ase file is one such file. Graphic style libraries open the same way.
An ellipse kept pie angles in its model, but nothing drew or set them. Now
the Transform and Properties panels show Ellipse Properties with Pie Start
Angle, Pie End Angle and Invert Pie, as in Illustrator, and
object.setLiveShape takes {pieStart, pieEnd, invertPie}. The pie runs
counterclockwise on screen from the start angle (0 at 3 o'clock) to the
end angle and closes through the centre; 0 to 360 is the whole ellipse,
an end of 0 means 360, and Invert Pie swaps the angles to show the other
part. One undo step each; a bad angle is an error. The labels are
translated in every complete language. The on-canvas pie widget is still
to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font library can hold two versions of one family and style (a new
Montserrat-Bold.ttf beside an old montserrat.ttf). The font database kept
only the first one loaded, so type set in the other couldn't be matched
when a PDF or .ai was opened: it came in as outlines. Now every version
loads (the first stays the one family and style resolve to), PDF import
tries the other versions when the glyphs differ, and type set in a version
the family and style alone wouldn't pick names it in CharStyle::font_version
(left out when None, so documents without it are unchanged). Layout,
shaping, the substituted-glyph highlight, Find Font, Package and Document
Info follow it; changing the font clears it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic
IHAGI-c
Rick
Vikram Bhaskaran
Fabio William Conceição
dotCooCoo
Juan Manuel Verges Solanas
shmuelbiller1