Metal reports no PCI ids, so both GPUs of a dual-GPU Mac had the adapter key
Metal:0000:0000. When the integrated GPU failed at start-up, the restart left
out both and the app quit, although the discrete GPU works. An adapter without
ids is now keyed by its name, so the restart leaves out only the one that
failed.
The failure itself was wgpu's indirect-call validation compute shader, which
OCLP-patched Metal on an Iris Pro can't compile. Nothing in VectorCraft or
egui draws indirectly, so that validation is off (WGPU_VALIDATION_INDIRECT_CALL=1
turns it back on).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Advanced › Create: Fills and/or Strokes, with Stroke (the widest line, px).
With Strokes, each colour's 8-connected parts no wider than the stroke width
(chamfer distance transform) trace as open centre lines instead of filled
outlines: the line is thinned to one pixel (Zhang-Suen with each removal
re-checked, so two-pixel lines survive; staircase corners dropped), its
skeleton becomes runs between ends and junctions (junction pixels merged,
spurs pruned, runs through two-way junctions joined, rings closed), and each
run is simplified and fitted with curves. The stroke width is the line's mean
width (pixels over length). Traced lines get round caps and joins in the
document. Without Fills, wider areas become 1 px stroked outlines.
`imageTrace.make` takes fills, strokes and strokeWidth, and refuses neither
fills nor strokes and a non-positive width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color mode's colours now come from a Palette (`palette` in imageTrace.make's
params), shown in the Image Trace panel under Mode:
- Limited: the `colors` best colours (what Color did before; the default).
- Full Tone: median cut until no colour box spans more than 96 (Less) … 8
(More) levels per channel, up to 256 colours, set by `colorDetail` 0-100
(the panel's Colors slider for this palette).
- Automatic: flat art (90% of the pixels in a few tight colours) traces with
exactly its colours, anything else as Full Tone.
- Document Library: the most used (at most `colors`) colours of the
document's swatches or of a swatch library (`library`: "document" or a
library id or name, chosen in the panel's Library list), used as they are;
traced shapes fill with the swatch's own colour, its colour model kept.
The library's colours are looked up at every trace, not saved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The Image Trace panel's Advanced options sit under a full-width collapsible
header (widgets::section_toggle, also used by New Document's Advanced
Options); whether it is open is kept with the UI preferences.
- View: Tracing Result, Tracing Result with Outlines, Outlines, Outlines with
Source Image and Source Image, in the panel, the Control bar and the
Properties panel. The view is saved in the Image Trace object's settings
(`trace.view`), kept when it is traced again, set with the new
`imageTrace.setView` command (or `view` on imageTrace.make) and drawn by the
canvas only (RenderOptions::trace_views): exports, printing and Expand keep
the tracing result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Panels other than Properties, Layers and Libraries live in the dock's icon
column, not as tabs. Dragging one onto the dock lit up the whole dock, tabs
included, and the drop put it back as an icon, so it seemed to vanish. The
drop zone now lights up the icon column for such panels (the whole dock still
for the tabbed ones), and the dropped panel pops out of its icon.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Artboard tool handled Delete/Backspace in Tool::key, but never claimed
the keys through Tool::claims_key. The UI only routes Delete/Backspace to a
tool that claims them, so the keypress went to the Clear shortcut instead
and the artboard stayed. The existing tests called the tool directly and
missed it.
The tool now claims Delete/Backspace while no drag is in progress and more
than one artboard exists. With only one artboard left, the keys stay with
the shortcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Other editors export a document with a single layer without a layer group:
the layer's name goes on the root <svg> (id, or data-name) and its art sits
directly inside. Such a file opened as "Layer 1"; now its one layer takes the
root's name. Files whose top-level groups are the layers are unchanged, and an
Inkscape root's generated id (with inkscape:version) isn't taken as a name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel laid out a row (with its thumbnail and several whole-document
lookups) for every open row each frame. A layer of 5,000 groups of 10 paths,
all open, took about 29 s a frame headless. Now the rows shown are listed once
per document change (with their layer colour and dimming worked out on the
way down) and ScrollArea::show_rows lays out only those in view: 0.4 ms a
frame. A row highlighted out of view is scrolled to.
The open rows move from UI state into the document's state
(DocState::layers_open, OpenRows): a document opens with only its top-level
layers open, and native files save the open rows (Document::layers_open,
written only when not the default, at save time like the view, so opening or
closing rows never marks the document modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Top-level groups already opened as layers named from data-name, else their
id. Now that also holds when one more id-less group wraps them (a transform
on all the art, or a <switch>'s chosen group), and hidden objects inside a
<switch> are kept (hidden) instead of dropped.
Nested groups stay groups unless something marks them as layers: the SVG
export now writes data-vc-layer="sublayer" on layers inside layers, and
import makes such a group (or an Inkscape layer group) a sublayer of the
layer holding it, in that layer's colour. A marked group anywhere else
stays a group.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pixel Preview only switched the pixel grid on from 600%: the art was still
rendered for the screen and drawn with linear filtering, so curves and
strokes stayed smooth vectors. Now, while a document pixel is bigger than a
screen pixel, the canvas renders the visible document pixels one per point
(anti-aliased by coverage), uploads them with nearest filtering and places
them over the document rect they cover, turning with a rotated view.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Free Transform's widget (Free Transform, Perspective Distort,
Constrain), the Properties panel's artboard editing (Artboard, Exit)
and Type › Insert Inline Symbol, found by the catalog completeness
tests after the rebase.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
These labels reach the screen through helpers that translate their
argument (dim_label, dropdown, tl!(CONST)), so the tl! literal scan
doesn't see them: the Libraries panel's empty state, Recolor Artwork's
1/2/3 Color Job presets, Spot Colors' CMYK Equivalents, the
Eyedropper's 3 x 3 / 5 x 5 Average, Print's PDF File destination and
Save PDF's CMYK profile in effect output intent.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
French now sits between Spanish and Italian (es, fr, it, ru): the
plural rule, the LANGUAGES registry entry (so the Language menu lists
Français before Italiano), the locale tests, the fr() helper and
french_reads_as_french. README, ROADMAP and docs/development.md list
the languages in the same order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add fr.tsv with the full interface coverage: every menu string, every
tl! literal, the plurals and the status/error messages (@msg).
Registered as complete_menus with the French plural rule (0 and 1 are
singular); every fr-* locale (fr-FR, fr-BE, fr-CA, fr-CH …) resolves
to it. Keeps the product, workspace and perspective preset names in
English like the other complete catalogs.
Tests: french_reads_as_french; fr added to KEEPS_MENU_NAMES and
COMPLETE_MESSAGES; the Latin-script glyph test covers French letters
and the no-break space; locale tests use de-DE as the unsupported case.
Clean-room: written from the meaning of the English labels in the
vocabulary French-speaking users of vector illustration software know
(Plan de travail, Nuancier, Contour, Fond, Tracé, Calque). No other
application's localisation was copied.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Character panel menu › Character Alignment gains ICF Top/Right and ICF Bottom/Left, and
`charAlign` takes `icfTop` / `icfBottom`: a character smaller than the largest on its line lines
up its ideographic character face's top (right, vertical) or bottom (left) with the big one's.
`FontFace::icf_margins` places the ICF inside the em box as the OpenType baseline tags define it
(https://learn.microsoft.com/en-us/typography/opentype/spec/baselinetags): `icfb` / `icft` of the
BASE table's horizontal and vertical axes against `ideo` / `idtp` (else the OS/2 typographic
descender and one em), for Han ideographs (else kana, else the first script). Without them, as that
page allows, the average ink box of some ideographs and kana; a face without ideographs uses its
em box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type pasted or imported from another app (Illustrator, PDF, SVG) arrives
without cached_bounds, which is not serialized. TextObject::bounds() then
falls back to estimate_bounds(), a rough 0.55 em per character, so the
selection box came up short of the last character and alignment looked off
until the file was saved and reopened (Session::add_document refreshes it).
Refresh the bounds of pasted text in paste_clip, covering paste and paste in
front/back/in place and every clipboard flavour, with a regression test.
In the Fill or Stroke chip's popover (Control bar, Properties ›
Appearance), the Swatch Libraries Menu button at the foot of the
swatches closed the popover and showed nothing, as in the video on
#536; Show Swatch Kinds did the same. egui remembers one open popup per
window: the chip's popover was such a remembered popup, so the button's
menu, opening as another one, closed the popover and itself with it.
The popover now keeps its own open state with widgets::popover (made for
popovers that open menus of their own), so the libraries menu opens over
it and a library chosen there opens in the library panel. Escape, a
click outside and a click on the chip still close it.
Test: tests_paintchips::the_popover_swatch_libraries_button_opens_the_libraries_menu
(fails before this change: the popover closes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K3vVft4VXvvy8SpbbUceTW
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
The DirectWrite font lister (#594) was installed in the desktop app only:
`vectorcraft-cli` (convert, run, MCP) didn't see fonts that font services
such as Adobe Fonts load on Windows, so its exports set such type in a
fallback font.
- The CLI shares the app's `system_fonts.rs` and installs it first thing
on Windows (not the win7 build). The text crate stays free of unsafe
code; the CLI denies unsafe code instead of forbidding it, so the
shared module's own allowance applies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic
mateususa
heojunfo
Simon Leblanc
imachus
Diego Gomez Garcia
Claude
haven