The M3/M4 work added ten panic sites the new workspace lints deny:
- doc: the lens/taper width profiles fall back to a uniform profile
instead of `expect` (the presets are a constant table, covered by tests).
- engine: `FlattenOptions::default` builds the medium preset directly
(`builtin`), `apply` skips an empty group instead of `expect`, the
writable-format fallback reports an error instead of `expect`, and the
new-art template's stroke comes back as an `Option` (it always has one)
instead of `expect`.
- tools: the freeform gradient drag returns no actions for a grab it never
starts (was `unreachable!`), and the gradient tool's release takes the
gesture with `if let` instead of `expect`.
Behaviour on the success paths is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient panel's Stroke buttons now work: with the Stroke proxy on a
linear or radial gradient they lay it within the stroke (placed on the
page, as before), along the path (start to end of each subpath) or across
it (left edge to right edge; inside/outside strokes span their visible
side). `paint.editGradient {stroke: true, strokeMode}` sets it (new art
too with nothing selected); `document.inspect` reports
strokeOptions.gradientMode. Model: StrokeLayer.gradient_mode (default
Within, not written).
Shared geometry in effects::stroke::gradient: ribs on the bisectors of
the flattened path (fans round sharp corners, widened under arrowheads,
following width profiles) cut slices each painted with a linear piece of
the gradient (Gradient::span). The canvas and raster export clip them to
the stroke's outline and arrowheads, grown a pixel and composited with
copy so there are no seams and translucent stops paint once. SVG and PDF
write the same slices clipped to the outline, with a warning (new
vectorcraft_svg::export_with_report). Outline Stroke and Expand make
gradient meshes clipped to the outline. Mesh quads now grow along their
edges so thin quads show no seams. Dashes, profiles and arrowheads keep
working in both modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Radial gradients show a dashed extent ellipse: its handle across the bar
sets the aspect ratio, the ellipse elsewhere rotates it, and the dot inside
the centre ring drags the focal point (GradientGeom.focal) for an off-centre
radial. paint.setGradientGeom takes aspect (%) and focal ([x,y] | null), and
start/end may be left out; the focal point keeps its place in the ellipse as
the vector, aspect and object transform. It renders as a two-point radial,
exports and imports as SVG fx/fy and PDF two-point radial shadings, expands
to off-centre rings, and travels in gradient params and the native format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Gradient tool on a freeform gradient the selected point shows its
spread as a dashed ring with a handle; dragging either sets the spread. A
point dragged out of the object is removed on release, and double-clicking a
point opens the gradientStop popover, which now edits the selected freeform
point (colour, opacity, spread). In Lines mode successive clicks draw one
smooth line (with a rubber band to the pointer); clicking an existing point
continues the line from it, and Escape or a click off the art ends it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Applying a gradient swatch records it as the gradient's swatch (the Swatches panel highlights
it and the Gradient panel's swatch menu marks it). A stop given a global or spot swatch (and a
tint) in paint.editGradient / a gradient paint's stops, dropped from the Swatches panel or
picked in the stop popover stays linked: editing the swatch recolours it, in art and in
gradient swatches, deleting it unlinks it. Spot stops separate on their plate, and a gradient
whose stops are all tints of one spot ink (or paper white) exports to PDF as a Separation
shading; gradients mixing models are written in one colour space (the PDF writer requires it;
mixed models used to abort the export).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour linked to a global or spot swatch keeps a tint (Paint::Solid.tint, 1 by default and
left out of files at 100 %): paint.setFill/setStroke {swatch, tint} apply the swatch at that
percentage, swatch edits recolour every linked colour at its own tint, and Color::tinted
resolves it (CMYK and Gray inks scale, RGB mixes toward white). swatch.new saves a tint as a
tint swatch ("Ink 40%") linked to its base. Spot tints separate as that percentage of their
plate (Separations Preview, PDF Separation value) instead of an ink-ratio guess. Adjust Color
Balance's Global mode (tint) shifts the tints of linked colours. The Color panel shows Tint
mode (the swatch chip, its name and a T slider) for linked colours; the Swatches panel
highlights the tint swatch in use. Gradient stops get the same link and tint fields (the
swatch walks cover them), so GradientStop is no longer Copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
paint.freeform.addPoint/setPoint/deletePoint/addLine/splitLine/selectPoint
and the paint.freeform.get query edit the freeform gradient behind the active
proxy (one undo step each; errors on other paints). The session keeps the
selected point. The Gradient tool on a freeform gradient selects and drags
points, adds points on the art (joined in Lines mode) and on lines, and
deletes the selected point. The Gradient panel shows the Draw toggle and the
selected point's colour, opacity, spread and Delete Point; the Color panel
recolours the selected point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Freeform gradients carry their own points (colour, opacity, spread) and lines
(Catmull-Rom curves through points), blended by inverse-distance weighting
from each disc of pure colour. paint.editGradient {kind: "freeform", mode?}
places 4+ points inside the shape, coloured along the stops (which follow the
points' colours). The renderer samples the field on a cached colour grid
drawn as an image paint clipped by the fill or stroke. Moves, transforms,
box rebases and warps move the points; old files load unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lossless gradient params carried a saved gradient's vector (document coordinates of the art it
came from) into swatch applications and the default paint, so a swatch applied elsewhere, or the
next shape drawn, got a gradient placed off the object. Applying a gradient swatch now fits it to
each object (keeping its aspect, on type in text space), and the default for new art keeps all
but the placement. Saving a swatch stays lossless.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The double-click that opens the popover lands outside it in the same frame, so the popover
closed as soon as it opened; only a later click elsewhere closes it now. The selected stop
remembers the document, first selected object and proxy it was picked on (Session::selected_stop),
so selecting other art or toggling Fill/Stroke no longer lets Delete or the arrows edit a stop
on a different gradient.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A fill row no longer turns stroke edits (stroke.set, setAdvanced, paint.setStroke, gradients) into
a new stroke on a selected group's own stack: an active row only stands for edits of its kind.
- Removing, duplicating or moving items of other objects (`ids`) no longer re-points the active row.
- transparency.set with an item touches the item only for opacity/blend (isolate or knockout alone
is one undo step) and rejects unknown blend modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking a fill or stroke row runs appearance.setActiveItem; the toolbar,
Control bar and Properties proxies and the Color, Swatches, Gradient,
Stroke and Transparency panels show and edit that item, and the gradient
tool's annotator follows it. paint.setFill/setStroke, stroke.set/
setAdvanced, paint.editGradient/setGradientGeom and transparency.set take
item (omitted: the active item, null: the top one). Item edits and the
appearance.* commands address the selected objects' own stacks, so a
group's own fills no longer leak into its contents. Any selection change
clears the active item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No behaviour change: every command keeps its id, label, menu, shortcut and
params doc.
- Engine: swatch.* -> cmd/swatch.rs, graphicStyle.* -> cmd/style.rs,
appearance.* (incl. copyFrom) -> cmd/appearance.rs, stroke.set/setAdvanced
-> cmd/stroke.rs, paint.editGradient/setGradientGeom -> cmd/gradient.rs.
Shared helpers in cmd/mod.rs: leaf_targets/paint_targets (replacing three
copies) and unique_name (swatch and graphic style naming).
- UI: dialogs.rs -> dialogs/ with one file per dialog and a DialogSpec
registry (one DialogKind row per dialog); shared field widgets in
dialogs/form.rs. Headless frame tests draw and confirm every dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic