Shipped code no longer unwraps, expects or panics: every one of the 124
unwrap()/expect()/panic!/unreachable! sites outside tests now handles the
failure (Result/Option, ?, let-else, defaults) and reports errors to the user.
- Lints: workspace clippy denies unwrap_used, expect_used, panic, todo,
unimplemented and unreachable; clippy.toml allows them in tests, and
integration tests, examples and testkit opt out explicitly.
- Safety net (vectorcraft_engine::guard): a panic in a top-level command rolls
the document back and returns EngineError::Internal; a panicking tool is
reset; the MCP server answers with an internal error and keeps serving; the
UI frame and each control request are guarded.
- APIs that hid failures now return them: Rendered::to_png/to_jpeg/to_webp
return Result (JPEG/WebP errors used to write empty files),
FontDb::face returns Option, Region::top returns Option.
- Fuzzing: engine/tests/import_fuzz.rs feeds garbage, hostile and mutated SVG
and PDF through import → render → export (30k cases locally, no panics).
- Docs: AGENTS.md/CLAUDE.md rule, docs/development.md "Robustness" section,
README pointer and a PR template checklist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient panel's Stroke buttons now work: with the Stroke proxy on a
linear or radial gradient they lay it within the stroke (placed on the
page, as before), along the path (start to end of each subpath) or across
it (left edge to right edge; inside/outside strokes span their visible
side). `paint.editGradient {stroke: true, strokeMode}` sets it (new art
too with nothing selected); `document.inspect` reports
strokeOptions.gradientMode. Model: StrokeLayer.gradient_mode (default
Within, not written).
Shared geometry in effects::stroke::gradient: ribs on the bisectors of
the flattened path (fans round sharp corners, widened under arrowheads,
following width profiles) cut slices each painted with a linear piece of
the gradient (Gradient::span). The canvas and raster export clip them to
the stroke's outline and arrowheads, grown a pixel and composited with
copy so there are no seams and translucent stops paint once. SVG and PDF
write the same slices clipped to the outline, with a warning (new
vectorcraft_svg::export_with_report). Outline Stroke and Expand make
gradient meshes clipped to the outline. Mesh quads now grow along their
edges so thin quads show no seams. Dashes, profiles and arrowheads keep
working in both modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Radial gradients show a dashed extent ellipse: its handle across the bar
sets the aspect ratio, the ellipse elsewhere rotates it, and the dot inside
the centre ring drags the focal point (GradientGeom.focal) for an off-centre
radial. paint.setGradientGeom takes aspect (%) and focal ([x,y] | null), and
start/end may be left out; the focal point keeps its place in the ellipse as
the vector, aspect and object transform. It renders as a two-point radial,
exports and imports as SVG fx/fy and PDF two-point radial shadings, expands
to off-centre rings, and travels in gradient params and the native format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Gradient tool on a freeform gradient the selected point shows its
spread as a dashed ring with a handle; dragging either sets the spread. A
point dragged out of the object is removed on release, and double-clicking a
point opens the gradientStop popover, which now edits the selected freeform
point (colour, opacity, spread). In Lines mode successive clicks draw one
smooth line (with a rubber band to the pointer); clicking an existing point
continues the line from it, and Escape or a click off the art ends it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a width point opens Width Point Edit (Side 1, Side 2, Total Width, a link
keeping the sides equal, Adjust Adjoining Width Points, Delete; dialog `widthPoint`, also
`ui.widthPointEdit`). Shift-click selects several width points, which drag and widen together
as one undo step; Alt-dragging a point's centre copies it (`stroke.widthPoint.copy`); dropping a
point onto another makes a discontinuous point (two points at the same t), and the stroke's
width steps there. `stroke.widthPoint.set` takes `adjustAdjoining`, keeps a discontinuous point
when only its widths change, and `stroke.widthPoint.remove` takes `indices`. Flipping a profile
along the path swaps the sides of its steps; `document.inspect` reports `widthPoints`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CMYK document that shows transparency is drawn once per ink plane
(complemented C, M, Y; complemented K as a grey) so every blend mode,
opacity, group, knockout and effect composites inks, PDF-style; the
planes' inks are shown through the working CMYK profile (cached 4-D XYZ
table). Cyan multiplied over magenta now shows C100 M100. Opacity masks
keep screen luminance; RGB colours and placed images are separated
first. RGB documents and opaque CMYK documents keep the screen-colour
path.
PDF export of CMYK documents writes its transparency groups with
/CS /DeviceCMYK (luminosity mask groups stay RGB) and puts top-level
transparency in a non-isolated page-wide group so it blends in CMYK too.
Flatten Transparency composites CMYK documents ink by ink and makes CMYK
regions. Non-separable modes no longer give NaN for greys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scaling with Scale Strokes & Effects on now scales stroke weights, dash
lengths and dash offsets and every distance parameter of object, fill and
stroke effects (groups and layers too), from new length metadata in the
effects catalogue. Off, nothing painted changes size and type keeps its
character strokes' weight. Scale Corners off keeps live corner radii.
object.scale/transform/transformEach take strokes?/corners? (default: the
preferences) and journal the values they used. The Scale dialog and a new
Transform Each dialog get both checkboxes, kept as the preferences on OK;
the panels' toggles go through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours gain a CIE Lab model (`Color::Lab {l,a,b}`, serde tag `lab`), handled through the
CMS (display, separation, conversions, gamut), tints (toward paper white), keep_model, harmonies,
recolouring, blends, Info and the Color panel. Swatch Options gets a Lab mode
(`swatch.edit {mode: "lab"}` / `{color: {l,a,b}}`), and colour params accept `{l,a,b}`.
Swatches panel → Spot Colors… (`ui.spotColors`, dialog `spotColors`) runs `swatch.spotOptions
{useLab}` (Document.spot_use_lab, default on): Lab spot colours show and separate from their Lab
values, or art linked to them takes their working-CMYK equivalents, as one undo step. PDF export
writes Lab spot inks as Separation spaces with a Lab alternate (tint function from paper white),
or a DeviceCMYK one with CMYK equivalents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[Registration] is a built-in swatch that prints 100% on every plate: Separations
Preview shows it on each process and spot plate and PDF export writes it as
/Separation /All. It can't be edited, moved, duplicated, merged or deleted;
swatch.list shows it after None and the Swatches panel applies it as a swatch.
Object > Create Trim Marks strokes the marks in Registration and marks every
artboard when nothing is selected ({style?, allArtboards?}). The preference
japaneseCropMarks (General) switches to Japanese marks: double lines at the
trim and bleed edges plus centre marks. Effect > Crop Marks (cropMarks) is a
live effect whose marks follow the object; rendering, SVG/PDF export and
Expand Appearance draw them. The mark geometry lives in doc::marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Attributes (Cmd+F11) shows Overprint Fill/Stroke, Show/Don't Show
Center, Reverse Path Direction Off/On, the non-zero / even-odd fill rule,
Image Map, a URL field with recent URLs and a Browser button, and a note.
New commands attributes.set and path.setFillRule; path.reverse takes ids and
reversed; attributes.info reports every value. Objects keep the attributes in
Node.attrs. SVG export wraps linked objects in <a>, and import reads links
back. The canvas draws the centre point of selected objects that show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object > Expand… opens a purpose-built dialog (Object, Fill and Stroke
checkboxes, disabled when the selection has nothing for them; Expand
Gradient To: Gradient Mesh or Specify N Objects, default 255). Every
option now does something:
- Object: type to outlines, live shapes to paths, effects baked.
- Stroke: strokes outlined into filled paths.
- Fill: linear/radial gradient fills become N solid rectangles or
concentric ellipses, or a gradient mesh with lines where the colour
changes, inside a clip group shaped like the object; freeform
gradients become a mesh shaped like the object. Colours keep their
stops' colour model. With Fill off gradient fills stay live.
object.expand {} defaults match the dialog (stroke now defaults on);
new query object.expand.info and UI command ui.expandDialog.
Create Gradient Mesh on a gradient-filled object takes the colours the
gradient paints at each point (GradientMesh::for_path_with, from_grid,
highlight).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paint given to a clipping path (paint commands with its id) now shows: its
fill paints inside the clip behind the clipped art and its stroke over the
art, unclipped, on the canvas and in SVG and PDF. Node::clip_paint splits the
clipping path into its fills and its strokes (type: its characters' too) for
all three outputs; the renderer caches the parts per clipping path. Clip group
visual bounds take in the stroke. Make Clipping Mask still leaves the clipping
path unpainted, as the reference app does; Ungroup no longer wipes a painted
clipping path's appearance (Release already kept it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Graphic Style Libraries and the Graphic Styles panel's library button open
read-only libraries of original styles generated in code (Shadows and Glows, Outlines
and Rules, Hand-Drawn, Gradient Finishes, Shape Effects, Blends and Transparency) in
the shared library panel. Clicking a style adds it and applies it to the selection as
one undo step (Alt: on top). Save Graphic Style Library writes .vcstyles JSON (styles
unlinked from swatches, with the patterns they paint with) to the user library folder
(User Defined) or a file; Other Library loads one, or another document's styles.
Commands: graphicStyle.libraries, graphicStyle.library, graphicStyle.addFromLibrary,
graphicStyle.saveLibrary, graphicStyle.loadLibrary; UI: window.graphicStyleLibrary
(.other), ui.saveGraphicStyleLibrary, window.userGraphicStyleLibrary1-10. The user and
loaded library bookkeeping is shared with swatch libraries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paths and compound paths now measure their visual bounds along their shape:
the body (inside/outside alignment, the width profile's widest point), the
tips of the miter spikes the limit keeps, projecting caps' corners and the
arrowheads' reach. A rectangle's right-angle miters stay within half the
weight (Fit to Selected Art, Rasterize and all-art SVG export get tighter,
exact boxes); Appearance::outset is the conservative reach for anything else.
Clicks hit what the strokes paint: outside strokes outside the path (0.8 x the
weight out), inside ones inside, the profile's width where clicked, caps,
spikes and heads. Click culling keeps a cheap box (hit test 0.34 ms per click
on the 50k-path budget). The subpath/tangent helpers move from the stroke
geometry into vectorcraft_geom::bez so both share them; a cross-check test
holds every painted point of the real stroke geometry inside the bounds and
hittable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrowhead gains 30 original shapes generated in code, appended after the first
ten so saved names stay stable: Barbed, Half Arrow (left/right), Concave,
Double Arrow, Chevron, Feather, Swallowtail, Reverse Triangle, Triangle to Bar,
Kite, Leaf, Drop, Half Circle, Oval, Target, Tag (+ open), Diamond (open),
Hexagon (+ open), Star, Cross, Plus, Double Bar, Dot on Bar, Slash, Double
Slash, Bracket and Fork. Each is drawn in local units of the head's weight
inside the usual 4 x 4 box, with its own stop for the stroke under it.
Arrowhead::label() names them in the menus. The Stroke panel's arrowhead
dropdowns render every head as the canvas draws it (cached textures, a shared
widgets::doc_preview that the Brushes panel now uses too) in a scrolling list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Stroke panel's Profile list now holds saved profiles next to the built-ins,
kept with the preferences (Prefs.width_profiles). Add to Profiles… names the
selected stroke's variable width, Delete Profile removes the selected stroke's
saved one (built-ins can't be deleted), Reset Profiles removes them all.
Three more generated built-ins (Pinch, Teardrop, Wave). The dropdown (Stroke
panel and Control bar) lists saved profiles and draws a custom profile's own
silhouette. Commands: stroke.widthProfile.add/delete/reset/list; stroke.set
{profile} takes a built-in id or a saved name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour linked to a global or spot swatch keeps a tint (Paint::Solid.tint, 1 by default and
left out of files at 100 %): paint.setFill/setStroke {swatch, tint} apply the swatch at that
percentage, swatch edits recolour every linked colour at its own tint, and Color::tinted
resolves it (CMYK and Gray inks scale, RGB mixes toward white). swatch.new saves a tint as a
tint swatch ("Ink 40%") linked to its base. Spot tints separate as that percentage of their
plate (Separations Preview, PDF Separation value) instead of an ink-ratio guess. Adjust Color
Balance's Global mode (tint) shifts the tints of linked colours. The Color panel shows Tint
mode (the swatch chip, its name and a T slider) for linked colours; the Swatches panel
highlights the tint swatch in use. Gradient stops get the same link and tint fields (the
swatch walks cover them), so GradientStop is no longer Copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking a Layers panel target circle runs `layer.target {id}`: a layer gets its art
selected and becomes the target (`Selection.target`) of the appearance, effect,
transparency and opacity-mask commands, which then edit the layer itself; the
Appearance panel lists it. Dragging a circle onto another runs
`appearance.transfer {source, target, copy?}` (Alt copies), dropping it on the trash
clears it. Filled dots also mark groups and layers with fills of their own, masked
objects get a dashed underline, and while an opacity mask is edited the panel lists
only an `<Opacity Mask>` entry and the tab says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking the Eyedropper opens Eyedropper Options (dialog
eyedropperOptions): raster sample size (point, 3x3, 5x5) and Picks Up /
Applies trees (transparency; focal fill colour, transparency, overprint;
focal stroke colour, transparency, overprint, weight, cap, join, miter,
dash; character and paragraph attributes). The options live in the
preferences (Prefs::eyedropper, eyedropper.setOptions, prefs key
eyedropper) and replace the earlier appearance/transparency switches.
appearance.copyFrom takes pickUp/apply overrides, reverse (Alt-click:
the selection's attributes onto the clicked object) and append
(Shift+Alt-click: add the source's fills and strokes). Type copies font,
size and paragraph attributes to type. Clicking an image samples its
pixels; sampled colours keep their colour model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Control bar and Properties Fill/Stroke chips show the proxies' paints
("?" for mixed selections) and open a popover with the Swatches panel body
(Shift-click or the toggle: the Color panel's mixer); a click brings the
chip's proxy forward through paint.toggleActive {fill}. The Properties
panel offers Recolor for multi-colour selections. Window panel shortcuts
(Color F6, Color Guide Shift+F3, Appearance Shift+F6, Graphic Styles
Shift+F5, Stroke Cmd+F10, Gradient Cmd+F9, Transparency Shift+Cmd+F10)
run window.panel {panel}, show in the Window menu and are editable.
paint.invert / paint.complement and the "?" state honour the Appearance
panel's active item; objects without bounds still show their paints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object > Pattern > Tile Edge Color... picks the colour of the tile edge
(a layer-colour preset or a custom colour), stored in the preference
patternTileEdgeColor and passed to the renderer. Pattern Options gains
Show Swatch Bounds: a dashed outline of the part of the tiling the swatch
repeats (the period of brick and hex tilings).
Commands: prefs.set {patternTileEdgeColor}, pattern.options
{showSwatchBounds}, ui.tileEdgeColor. Model: PatternDef.show_swatch_bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Freeform gradients carry their own points (colour, opacity, spread) and lines
(Catmull-Rom curves through points), blended by inverse-distance weighting
from each disc of pure colour. paint.editGradient {kind: "freeform", mode?}
places 4+ points inside the shape, coloured along the stops (which follow the
points' colours). The renderer samples the field on a cached colour grid
drawn as an image paint clipped by the fill or stroke. Moves, transforms,
box rebases and warps move the points; old files load unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With type selected, stroke.set (without an item) gives every run the
weight, cap, join, miter limit and dashes instead of adding an object
stroke; while the Type tool edits text, the Stroke panel styles the
selected characters through text.setRangeStyle `strokeOptions`, and the
panel reads the first run (or the selection's style).
CharStyle gains stroke_cap, stroke_join, stroke_miter_limit and
stroke_dash (defaulted, skipped when default). Character strokes and
object strokes on type now draw through the shared stroke geometry on
the canvas, in PDF and in SVG (live text writes cap/join/miter/dash and
tspans reset what the first run sets; object strokes are drawn on the
glyph outlines), so every stroke option, opacity and blend applies.
Outlines, the Eyedropper and graphic styles keep the options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A group's or layer's own fills and strokes paint every member's geometry, below or above the
members as the new contents slot (Appearance.contents_index) says; its geometry effects reshape
the members as one piece and its raster effects apply to the composite (one combined shadow),
respecting knockout groups. Type's own fills and strokes paint under or over its characters.
Render, SVG/PDF (via bake) and Expand Appearance evaluate them alike.
Commands: appearance.* / effect.* take target: "object"|"contents" and layer ids;
appearance.moveItem moves the Contents slot (from: "contents") or an item across it
(contents); appearance.targetContents selects a group's members. Graphic styles applied to a
group now style the group itself. The Appearance panel shows Contents/Characters rows that
drag, and double-click to target the members or edit the characters' paint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
layer.clippingMask.toggle {id?} -> {clip}: the top object of the current
layer (or of the one selected group, or of `id`) becomes the clipping path,
unpainted and moved to the bottom so art added later is clipped too; pressing
the button again releases the mask and leaves the path unpainted. One undo
step. The Layers panel button runs it and underlines clipping-path names.
Model: NodeKind::Layer.clip (skipped when false). Clipped layers render, hit
test, bound, and export to SVG and PDF like clip groups (Node::clips /
set_clips); the clip-path helpers are shared with Make/Release Clipping Mask.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On screen, a group (or object) with opacity, a blend mode, an opacity mask or
knockout whose content blends is drawn offscreen over a copy of its backdrop
and mixed back in by its opacity, mask and clip (a group blend mode then
applies to the backdrop-free result, as PDF defines it). Isolate Blending keeps
the content starting from transparency. Clip groups no longer isolate their
children (blending content is clipped per drawing), and non-isolated knockout
groups composite their elements against the art below the group. Groups
without blending inside still render as plain layers.
In PDF, such groups are written as non-isolated transparency groups (a
constant-alpha soft mask instead of the writer's isolated opacity group),
knockout groups included.
doc: Node::blends_through / children_blend.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One shared colour visitor (`colorcmds::Recolor`, used by Edit Colors, Recolor Artwork, the Blend
commands, the proxy Invert/Complement and Document Color Mode) maps solid colours, gradient stops
and text runs as before, and now also:
- gradient-mesh points (with fills); Blend grades meshes by their average and keeps their shading;
- embedded images' pixels (`includeImages?`, default on): the image becomes a recoloured copy under
a content key, the original stays for undo and other objects; linked images are left alone;
- the tiles of pattern fills and strokes (`includePatterns?`, default on): one recoloured copy per
pattern saved as a new pattern swatch ("Dots 2"), the original untouched.
Everything stays one undo step; only nodes that change are copied, in one walk of the tree.
- doc: `ImageBlob::map_rgb` (decode, map each distinct colour once, keep alpha, re-encode PNG),
`ImageBlob::content_key` (now also used by image import) and `ImageBlob::png`.
- `recolor.colors` lists mesh points and pattern tile colours too.
- patterncmds: `add_pattern` adds a pattern and its swatch (shared by Make Pattern and Save a Copy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill and stroke layers (and type characters' fill and stroke) carry an
overprint flag. object.setOverprint {fill?, stroke?, item?, ids?} sets it
(groups: their contents; type: its characters too; one undo step, none when
nothing changes) and attributes.info reads it back (null where mixed).
Overprint Preview and Separations Preview draw overprinting fills and strokes
with Multiply. The old Document.unknown["overprintBlack"] id list migrates to
the new flags on load; Overprint Black now sets the flags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CMYK document (file.new {colorMode: "cmyk"}, Document::new_with_mode)
starts with CMYK default swatches (default_swatches(model)), and RGB
colours and gradient stops applied to it are stored as CMYK (Gray stays
Gray) unless paint.setFill/setStroke get keepModel; the Color panel keeps
the model picked on its sliders. RGB documents keep colours as given.
Harmonies and Color Guide variations keep the base colour's model, Recolor
Artwork the replaced colour's, and Edit Colors blends between models take
the document's, through a shared Color::in_model / keep_model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New Document.page_isolate / page_knockout, set by
transparency.togglePageIsolatedBlending / togglePageKnockoutGroup {value?}
(one undo step each, saved with the document, reported by
transparency.info) and the Transparency panel menu's check items. The page
renders as an isolated group (top-level blend modes no longer blend with
what lies under the page) and/or a knockout group whose elements are the
layers (neutral layers pass their objects through). PDF and SVG wrap the
page content in an isolated group and write page knockout as soft masks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The eyedropper (`appearance.copyFrom`), `graphicStyle.new` and `graphicStyle.apply` move placed gradients so they
sit at the same place relative to each target's bounds (type: its layout box in text space) instead of where the
source had them; the paint defaults take the gradient unplaced, so new art fits it. Model: `GradientGeom::rebase`
/ `GradientPaint::rebase` (color), `Appearance::rebase_gradients` (strokes relative to their inflated boxes) and
`GraphicStyle::unit_box`: new styles store placed gradients in unit-box space; styles from older files keep
document coordinates and apply as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New Node.knockout_shape (transparency.set / object.setProps knockoutShape,
reported by transparency.info). In a knockout group such an object knocks
out only as much as its opacity and mask let through (a 50% object knocks
out 50%); otherwise its full coverage knocks out. The renderer, PDF and
SVG masks honour it, and the panel's checkbox is now live.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Knockout Group is now Knockout {Neutral, Off, On} (old files' true loads as
On, false as Neutral). In a knockout group each child erases what the
children below it drew where it paints, then adds itself, so it composites
against the group's backdrop; neutral plain groups pass their children
through to the enclosing knockout group. transparency.set / object.setProps
take knockout "on"|"off"|"neutral"|bool; transparency.info reports the
state. PDF and SVG write knockout groups as nested soft masks with the same
look (PDF warns); the Transparency panel has a tri-state checkbox.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New commands: swatch.addUsedColors {selection?, global?} adds a swatch for
each colour the art uses that no solid swatch has (optionally global, the
art linking to them); swatch.unused lists the swatches nothing uses (links,
colours, gradients and patterns in art, symbols, pattern tiles and graphic
styles count); swatch.merge keeps the first colour and relinks the others'
art; swatch.ungroup and swatch.sortByKind (process, spot, gradients,
patterns). Each edit is one undo step; the panel menu items are enabled.
Document::visit_paints walks every paint of a document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Engine: effect.move {from, to, fromItem?, toItem?, copy?}; appearance.showAllHidden;
appearance.duplicateItem takes to? and indices?; appearance.removeItem takes indices?;
Appearance::has_hidden/show_all. UI: effect.dialog takes index? (edit in place via
effect.setParams) and opens the effectExists question for an effect already in the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Styles now store the object's opacity, blend mode, isolate and knockout and apply them.
New Graphic Style from a group without its own paint captures its topmost object's
appearance, and from type its characters' fill and stroke. Names are made unique.
graphicStyle.apply takes ids and add (Alt-click in the panel adds the style on top of the
existing appearance). graphicStyle.list reports every style. Applying links objects to a
stable style id (Node.graphic_style), which the management commands build on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An appearance is basic with at most one fill and one stroke, none hidden or
with its own opacity, blend mode or effects, and no object effects; Reduce
to Basic keeps the topmost visible fill and stroke. The Layers panel fills
an object's target circle for any non-default transparency (blend mode,
isolation, knockout or an opacity mask: Node::has_default_transparency).
A multi-selection whose objects differ shows "Mixed Appearances" with no
rows. The Appearance panel's object row and the Control bar name the
selection from one source, and type objects are "Type". Expand Appearance
is only in the Object menu. Clear Appearance also resets the object's
opacity and blend mode. Tests cover addFill/addStroke, setItem/removeItem,
clear, reduceToBasic and graphicStyle.apply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
swatch.new takes mode and group; swatch.newGroup takes fromArtwork, toGlobal and includeTints and reports the group's swatches and the paints it linked. Adds a shared radio widget and the ui.newSwatch / ui.newColorGroup openers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas
bflatastic