A subpath that geometrically closes (e.g. an ellipse outline) was always emitted
with SPLINE group 70 = 8 (planar only). Autodesk's DXF reference defines bit 0
of group 70 as 'closed', and CAM software such as VCarve relies on it to treat
the cut as a pocket or profile rather than asking the operator to join endpoints.
Now `self.e.int(70, if sub.closed { 8 | 1 } else { 8 })`.
Test: extend lines_are_lwpolylines_curves_splines_and_fills_hatches to assert
the existing closed ellipse's SPLINE group 70 is '9' (1 closed + 8 planar).
These commands edited the document even when nothing changed, so the
call recorded an undo step, emptied Redo and marked the document
modified:
- Change Case to the case the text has, Smart Punctuation on type with
nothing left to change or on a selection with no type in it, and
Find and Replace when every match is replaced with the text it is.
All three rewrite the text runs through edit_runs, which now edits
only when a run changes.
- Convert To Area Type with no point type among the objects, and
Convert To Point Type with no area type among them.
- Type on a Path Options given the values the type has, without Flip:
OK in the dialog with nothing changed, or a Type on a Path effect
the type has.
- Fill with Placeholder Text on type that holds its placeholder text
already.
- type.insert with an empty text on type that ends with a run of
text.
These commands now return without editing the document. The replies
have the same form as before. A call that changes something still
records one undo step.
One line in the evidence list of docs/target-app-parity.md names every
command above except type.insert.
An image larger than the tracer's 64 megapixels was refused. It is now
decoded and box-filtered down to the largest size of its aspect within
64 megapixels, and the traced paths are mapped back to the image's own
size. Images over 192 megapixels are still refused from their header,
before decoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XbTizgRsDpFPjtBgZAvfrZ
moveto, lineto and curveto check that the current path holds fewer
than 1,048,576 elements before they add one, and they stop the reading
with "a path has too many points" when it is full. closepath added its
element without that check. In an encoded user path, a byte of 255
runs the next operator 223 times. vectorcraft-cli info on a 622-byte
file with one uappend that runs closepath 11,150,000 times peaked at a
memory footprint of 601.9 MiB and reported "the file draws nothing".
The string operator makes strings of up to 4 MiB, and one uappend of
an operator string that long would add about 468 million elements of
56 bytes, about 24 GiB.
closepath now makes the same check before it adds its element, in the
closepath operator and in the ClosePath arm of append_user. On the
file above, the reading now stops with "a path has too many points",
and vectorcraft-cli info peaks at 62.0 MiB. A path below the limit
closes as before.
Tests: a moveto followed by 1,100,000 closepaths, and a uappend that
runs closepath 1,059,250 times, are each read between two squares.
Each reading stops with "a path has too many points" and keeps only
the first square.
Each tool switch builds a new tool, and a new Artboard tool started on
Artboard 1 whatever artboard was active. With Artboard 2 active, after
the tool was chosen with Shift+O, its toolbar button, Edit Artboards in
Properties or Document Setup, or the Artboards panel menu's Artboard
Options…, the canvas outlined Artboard 1, and Delete, Cut, Copy, the
Transform panel and Artboard Options acted on Artboard 1. The first
pointer event over the canvas, a hover included, then made Artboard 1
the active artboard for Align to Artboard and Paste in Place too.
VectorcraftApp::select_tool now starts a newly chosen Artboard tool on
the active artboard, as the Artboards panel row's Options button does.
Choosing the tool again while it is in use leaves it as it was, and the
artboards Shift-clicked into its selection stay selected.
The test makes Artboard 2 active, chooses the tool with tool.select,
and checks the tool's active option, Artboard Options, a hover over
Artboard 1 and Delete. It then presses Shift+O with two artboards
selected and checks that both stay selected.
Docs: docs/mcp.md (tool.select), docs/target-app-parity.md.
Add the Hungarian catalog (4,524 rows): every menu string, every `tl!`
literal, the contextual and `@id` rows, the plurals and the status and
error messages, written from the meaning of the English labels in
general Hungarian vector-illustration vocabulary. Conventions are in the
header of `hu.tsv`.
- Register `hu` ("Magyar") in `i18n::LANGUAGES` as a complete language
with `plural_none` (a count takes the singular); every `hu-*` locale
resolves to it.
- Tests: Hungarian joins the menu-label, menu-string, `tl!`-literal and
message coverage checks; `hungarian_reads_as_hungarian` pins the core
vocabulary, the plural, the `file.close` override and a nested
message; ő ű Ő Ű are checked in the bundled UI fonts.
- README, ROADMAP, docs/development.md and docs/localization-parity.md
list Hungarian.
Localize native/web file filters, diagnostic labels, numbered presets
and contributor tooltips with English fallback and Czech plural forms.
Fix gradient adjective agreement and disambiguate Japanese printer marks
in PDF/Print choices and summaries. Keep file extensions and names intact.
Add Czech catalog rows and regression coverage; update localization evidence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Find in Folder… in Linked File Not Found and in the Links panel menu
looks in a folder the user picks, and in its subfolders, for the files
with the names of missing linked files, in any letter case. In the
Links panel menu it looks for the selected linked files when there are
any. It uses the folder search of the Missing Fonts dialog. Find
Linked Files lists each file it looks for with the files found for it.
A file with the size and contents saved with the link comes first. A
file of the saved size comes next when the link saved no hash or the
file is larger than 1 GB, and any other file of the name comes last.
Within each group, a file named in the same letter case comes first.
Then each file's folder names are compared with the saved path's, from
the innermost outward, up to the first one that differs, and a file
with more matching names comes before one with fewer. A file is chosen
when it is the only file found, or the only one with the saved
contents, and the user can choose another file or Don't Relink.
Relink relinks each file chosen, and each relink is one undo step.
With Copy into the document's folder, which shows for a saved
document, each image's file is copied next to the document first. The
file's name, then Name 2.png, Name 3.png and so on, are tried in turn
until one is free, which gets the copy, or is a file with the same
contents, which is used. A placed document is relinked where its file
is. The status line names the first file that fails to relink, and the
other files still relink. When Find Linked Files opens from Linked
File Not Found, the missing files left without a choice, and any that
fail to relink, go back to that dialog. On the web, Find in Folder… is
disabled in the Links panel menu, and links.findFiles can't start a
search.
- links.findFiles searches on separate threads and returns at once;
links.findFiles {} reports the search, and {stop: true} stops it. It
looks for at most 1,000 linked files at once: the active document's
missing ones, or those of the objects it is given. It hashes a file
only when a link of its name saved the file's size and a hash, and
only when the file is 1 GB or smaller. It ends once every linked
file has its same file, and it searches only the folders
text.findFontFiles may search, with the same maxSeconds, depth and
count limits.
- links.relink {copy} copies the file it is given into the saved
document's folder and links images to the copy; a call that includes
a placed document fails. Each name it writes is checked against the
automation write root. text.addFontFiles and links.relink {copy}
make their copies with fileio::copy_new, which never replaces a
file. The text.addFontFiles params text and docs/mcp.md say which
names are tried for a copy.
- vectorcraft-doc adds links::hash_reader, which hashes what a reader
reads as hash_bytes hashes bytes.
- ui.findLinksInFolder is the Links panel's Find in Folder… for agents;
docs/control-protocol.md lists the dialog's fields.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md.
A click on a Layers row runs layer.setCurrent, which makes the row's
layer current whether it is hidden or locked and keeps the selection.
Object › Arrange › Send to Current Layer then moved the selected
objects into that layer, or into a sublayer of a hidden or locked
layer, and left them selected. In that case drawing, typing and
pasting put new art on the topmost layer that is shown and unlocked,
and since #1039 they fail with "the target layer is locked or hidden"
when no layer is shown and unlocked.
Send to Current Layer now fails with that error when the current layer
is hidden or locked, or is inside a hidden or locked layer. It makes
the check that DocState::target_parent makes for new art
(Document::is_editable) before it moves anything or records an undo
step. The objects stay where they are and stay selected. The message
already has a row in the cs, de, es, fr, it, ja, pt-br, ru and uk
catalogs.
Docs: docs/target-app-parity.md.
Transform Again kept only the last transform's matrix and its Copy
flag. After a Selection tool handle drag resized area type, Transform
Again scaled the type instead of resizing the type area again. After
Move, Rotate, Scale, Reflect or Shear with Transform Patterns set
differently from General › Transform Pattern Tiles, Transform Again
followed the preference, and after a scale whose strokes or corners
param differed from Scale Strokes & Effects or Scale Corners, it
followed those preferences. A recorded Transform Again played back
with the preferences in effect at playback, although its step records
the strokes, corners and patterns values it used.
last_transform now keeps the options with the matrix, as
last_perspective keeps the perspective.transform params.
apply_transform stores the copy, typeAreas and patterns values a
transform command used, and strokes and corners when it scales.
commit_interaction stores the params of a drag's last object.transform
preview with the values that preview noted. object.transformAgain
passes the options to the transform it repeats, and a true or false
value given in its own params under one of those names takes
precedence. A recorded step plays back with the values it records.
Three engine tests fail without the change: Transform Again after a
handle drag on area type, Transform Again after a Move with patterns:
false while Transform Pattern Tiles is on and after a Scale with
strokes: true while Scale Strokes & Effects is off, and a recorded
Transform Again played back with Transform Pattern Tiles on.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
Preferences › Guides & Grid › Gridline every and Subdivisions set the
grid of the documents that were open when either value changed, and of
no other document. A document made with File › New, or opened from a
file VectorCraft reads no grid from (SVG, PDF, EPS, .ai and the other
imported formats), got a 72 pt grid with 8 subdivisions, whatever the
preferences were set to. After a restart the saved values applied to no
document, because the desktop app restores the preferences at launch,
before any document is open.
file.new now gives a new document the preferences' grid, and
document.open, file.newFromTemplate and file.revert give it to a
document read from such a file. A native file, and the native document
that an SVG, PDF, .ai or EPS file carries, keep the grid they were
saved with. Changing either preference still sets the grid of every
open document.
Docs: docs/mcp.md (gridlineEvery, gridSubdivisions),
docs/target-app-parity.md.
With Smart Guides off, the Selection tool grabbed the selection by the
pressed spot, so Snap to Point brought the pointer onto another anchor
while the object's own anchor stayed a few pixels off. A press within
reach of an anchor now grabs the object by that anchor (Smart Guides on
or off, also without a hover event first), and the arrow turns hollow
over such an anchor while Snap to Point is on.
Fixes#1274
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BFlat
Royce
dotCooCoo
Dylan M. Taylor
Fabian Grajales
Skaywalker
Losminek
FredApps
Luca Lorenz
Fabio Lussi