The colour histogram used the top 5 bits of each channel, so tones less
than 8 values apart always shared a bin and could never get their own
palette entry, however many colours were asked for. A dark, low-contrast
photo (a book-cover texture with RGB 33..66) traced to 5 colours when 12
were requested, and eight grey stripes 32..39 traced to one:
vectorcraft-cli run --in stripes-32-39.png --cmd select.all \
--cmd imageTrace.makeAndExpand \
--params '{"params":{"mode":"color","colors":8,"noise":0,"method":"overlapping"}}'
-> {"anchors":4,"colors":1,"id":4,"paths":1}
The histogram keeps its 32x32x32 bins, now fitted to each channel's range
among the opaque pixels: a channel spanning at most 32 values keeps every
value apart, a full-range channel keeps the old 5-bit bins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drop a failed control connection and reconnect for the next request, never resend an operation that may already have completed.
A loopback regression applies a rectangle then drops its reply. It reproduces two edits before the fix and verifies one edit, an error, and successful inspection afterward.
paint.setFill {"color": {"c": 18.16, "m": 13.39, "y": 13.9, "k": 0.79}} stored
K 79 %: recolor.colors listed the colour as "cmyk 18.16 13.39 13.9 79" and the
exported PDF printed it as a dark grey. color_value chose the scale for each
component on its own (above 1: percent, else a fraction), so a percentage of
1 or less beside larger ones became a fraction.
A {c, m, y, k} object now takes percent for every component as soon as one is
above 1, and fractions only when all four are within 0..1, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch was cut from an older main, so its commit also removed four engine tests (stroke and
paint rejection, malformed anchor selection, bad anchors in path commands), the newer
window.panel.float/dock parameter docs and the un-collapse on showing a floating panel. This puts
them back and adds the Horizontal & Vertical Align Center label to the complete catalogs.
Object › Graph › Data (and the graph tool after drawing) opens the
Graph Data window as a worksheet, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-data.html
and
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/adjust-column-width.html
describe, in place of a free-text CSV field.
- The first row holds the series labels, the first column the category
labels, the other cells the values. A click picks a cell, edited in
the entry box above the sheet: Tab enters it and moves right, Enter
down (Shift: the other way), the arrow keys move between cells.
Pasting tab- or line-separated text fills cells from the picked one.
- Import Data reads a tab-separated text file (UTF-8, or UTF-16 with a
byte-order mark), at most a graph's 10,000 × 256 cells.
- Transpose row/column and Switch x/y (scatter graphs) rearrange the
sheet; Revert reads the graph's data again; Cell Style sets the
decimals shown and the columns' width. Apply redraws the graph and
leaves the window open.
- The sheet reads and writes the graph's series, categories and rows
(not CSV), so labels with commas, quotes or `|`, blank labels and
graphs without category labels come back as they were.
- Only the cells in view are drawn, read in place, so a full-size sheet
stays responsive.
Own choices, as the pages don't say: Number of Decimals only changes
what the sheet shows; Transpose is off when it would make more series
than a graph holds; the arrow keys move between cells rather than the
caret. Dragging a column's edge to resize it isn't supported yet.
Text formatted in a graph, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-the-text-in-graphs.html
describes (the whole graph with the Selection tool, or labels picked
with Group Selection, through the Character and Appearance controls),
now survives the graph being drawn again from its data.
- A graph keeps a character style per kind of label: value axis
numbers, category labels (category axis, radar spokes, pie names)
and legend labels (beside or across the top, or in wedges).
- text.setStyle, text.setFormat and fill/stroke changes on a graph's
labels apply the same change to their kind's kept style, so only what
the user changed is kept and every label of that kind follows. A
change to part of a label's text isn't kept.
- Labels are told apart by where the graph draws them, not by their
text, so a category named "2" and the value axis' 2 stay apart.
- Label spacing follows a kept size (legend rows, offsets from the axes
and wedges), so bigger labels don't overlap; at 9 pt it's as before.
Wedge labels stay white on dark wedges unless given a colour.
- A kept style from a file is held to the Character controls' limits.
Own choice, as the page doesn't say what happens on a data change:
formatting one label formats its whole kind, since the labels are drawn
again from the data. Other ways of restyling text (eyedropper,
character styles, Find Font) aren't kept yet. New fields are written
only when set; graphs without kept formatting draw the same art as
before.
Graph Type's column, bar and cluster widths from 1% to 1000%, overlapping
past 100%, the overlap order, and Draw Filled Lines, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-columns-bars-and-lines.html
describes.
- Column and cluster widths take 1–1000% and are drawn as set: past
100% columns (or clusters) overlap. The legend moves past columns
that reach beyond the plot.
- firstColumnInFront draws the first series over the others (in each
layer); firstRowInFront draws each series' first category over the
next. Across series the series order decides, so each series stays
one group for Group Selection.
- filledLines draws the connecting lines of line, scatter and radar
graphs as 3 pt bands filled with the series colour (set as a fill or,
on a thin line, a stroke) with a thin black outline. A run with no
outline to make, or a graph past 20,000 data points, keeps thin lines.
- The Graph Type query lists the overlap options only for graphs with
columns or bars, and filled lines only for graphs with lines.
Own choices, as the page doesn't say: both overlap options start off
(today's order), and the band is 3 pt wide. New fields are written only
when set. Graphs with default options draw the same art as before.
Graph Type's Add Drop Shadow, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-drop-shadows.html
describes, and Add Legend Across Top, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/change-the-position-of-legends.html
describes.
- dropShadow: a shadow behind each column, bar, stacked segment, line
(line, scatter and radar) and pie wedge, just behind the series of
its layer, so areas and columns drawn in front don't hide the shadows
of the layer behind them.
- legendAcrossTop: the legend's swatches and labels left to right from
the plot's left edge, wrapping at the plot's width, the last row just
above the plot and anything drawn over it (radar and stacked-pie
labels).
Own choices, as the pages don't say: a shadow is a black copy 2 pt down
and right at 35% opacity; markers, areas and legend swatches cast none,
nor do stacked segments of 0; a graph with more than 200,000 shadowed
marks draws none.
New fields are written only when set. Graphs with default options draw
the same art as before.
Graph Data's Transpose row/column and Switch x/y, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-data.html
describes, a `|` in a label as a line break, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-labels-and-data-sets.html
describes, and the pie graph options of
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-pie-graphs.html
- graph.setData {transpose: true} swaps rows and columns (after any new
data in the same call); a graph with more categories than a graph can
have series (256) is refused rather than cut. {switchXY: true} swaps
each scatter series' y and x columns, labels included.
- A `|` in a category or series label starts a new line: legend rows
grow with their lines, labels beside an axis or in a wedge centre
theirs. A label of only `|` is blank.
- Pie graphs: pieLegend none|standard|wedges (Legends in Wedges puts the
series labels inside their wedges, in white on dark wedges, drawn over
the pies), piePosition ratio|even|stacked and pieSort all|first|none,
as dropdowns in the Graph Type dialog, which lists them for pie graphs
only.
Own choices, as the page doesn't say: Position and Sort keep today's
drawing by default (Even, None); Ratio sizes pies by area, the biggest
keeping the full size; Stacked pies share a centre, each drawn as the
ring outside the next smaller one so none covers another, with their
names over them.
New fields are written only when set. Graphs with default options draw
the same art as before.
The Graph Design dialog lists the designs with a preview of the
selected one and has New Design, Rename, Delete Design, Paste Design
and Select Unused, as the Graph Design dialog of
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/reuse-graph-designs.html
works; the Marker dialog lists the designs.
graph.design takes them as params:
- new: name or true (the selected art, named "New Design", numbered
when that's taken);
- rename + to: the graphs drawing the design follow it to its new name;
- delete: a name or a list of names;
- paste: as before;
- no params or selectUnused: the designs, and those no graph draws with.
The engine's drawing is unchanged.
Graph designs are named art a graph draws in place of its default
marks. Marker designs follow
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/apply-marker-designs-to-graphs.html
and the Graph Design dialog
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/reuse-graph-designs.html
- graph.design saves the selected art as a named design (Save Design),
pastes a copy of a design into the document, selected, to edit and
save again (Paste Design), and deletes one; graphs drawing a deleted
design go back to their default marks.
- graph.marker draws the data points and legend swatches of the series
picked with Group Selection (or listed, or every series) with a
design: its backmost object is scaled to fill the default marker's
square, strokes, effects and pattern tiles scaling with it. Line,
scatter and radar series; null goes back to the default square.
- Object › Graph › Design… and Marker… open dialogs listing the
document's designs.
Own choices, as the pages don't say: the backmost object's bounds, not
only a rectangle's, set the size (a single object uses its own bounds);
Delete Design manages the list; a design keeps its own paint, so
painting a series doesn't recolour it.
Designs are stored in a new `graphDesigns` list and series designs in
`seriesMarkers`, written only when present. A graph saved as a design is
kept as the plain art it draws. A design holds at most 2,000 objects, a
document 1,000 designs, and a graph whose designs would draw more than
200,000 objects draws default squares; a file's designs are tidied the
same way on open. Global swatch edits, image relinking and placed
documents see design art like symbol art. Graphs without marker designs
draw the same art as before.
These strings reach tl!/tr at render time but had no Czech entry; several are passed through variables or helpers, so the literal-based coverage test does not see them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The key "Add" is shared by Effect > Pathfinder > Add (PathfinderOp::Unite),
the File Info button and a label in the raster effects dialog. One plain row
cannot fit all three: "Přidat" is right for the button, but the Pathfinder
effect unites shapes, so it reads "Sjednotit".
- cs.tsv: `@id pathfinder.add` = "Sjednotit"; the plain "Add" row stays
"Přidat".
- menus.rs: Effect menu items all run effect.apply / effect.dialog, so the
command id cannot tell them apart. effect_item_label() looks the effect's
own id up first (an @id row), and "Last Effect: {name}" does the same.
- appearance.rs: the Appearance panel's effect labels use the same lookup.
- i18n/tests.rs: an @id row may now name an effect id as well as a command
id; czech_reads_as_czech pins Add and pathfinder.add.
No other catalog has an @id row, so their behaviour is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Windows the Hand tool, Space and the Zoom tool showed the wrong
cursors: winit maps egui's Grab and Grabbing to the four-headed move
cursor (IDC_SIZEALL) and has nothing for ZoomIn/ZoomOut, so the hand
appeared as arrows and the magnifier not at all. Those four were the
only tool cursors left to the system.
They are now vector glyphs like the others (an open and a closed hand,
a magnifier with a plus or a minus), shown as OS cursors on the desktop
and painted on the web, and the canvas routes the Space, Hand and Zoom
states through the same path as the tool cursors.
Tests: the glyphs rasterize at every scale with the others; only the
busy states stay system cursors.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Clicking an anchor of a path selected whole (or one of several selected
anchors) with the Direct Selection tool left the selection as it was,
so the clicked anchor never became the selected one and Live Corners
and the anchor controls kept acting on every corner. A plain click now
selects that anchor alone, as the public documentation describes (a
click selects the anchor point, Shift-click adds others):
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/select-anchor-points-in-paths.html
The press keeps the selection so a drag still moves every selected
anchor with the one held; only the release without a drag narrows it.
Shift still toggles, Alt still picks the whole path, and an anchor that
wasn't selected is still selected on the press.
Test: direct::tests::a_click_on_a_selected_anchor_selects_it_alone.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
bflatastic
japbcoelho
KnottyDyes
sanyamsingh001
Murat Vural
IHAGI-c
FredApps
Losminek
zakariayacine
Ikki Nishihara