During a Selection-tool drag the bounding box and its handles stayed on
screen while the art moved, so the content looked as if it slid inside
a box of its own. The box now hides once a drag moves, scales or
rotates the selection, as in Illustrator, and comes back on release. A
press that hasn't moved, and a marquee, keep it. Tools gain
`transforming()` (Session::tool_transforming) for this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selection moved with the Selection or Direct Selection tool that lines
up with nothing along an axis lands as far from its neighbour as two
other objects of its row (or column) are apart, or halfway between its
two neighbours, within the snapping tolerance; the equal gaps are marked
with a line and end ticks in the Smart Guides colour. The objects are
taken as wholes on their layers (groups too), and inside a group holding
the selection, its other objects. Off, moves only line up as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An anchor was picked within the selection tolerance (3 px), the same reach
as its segments: a press a little off the anchor's 5 px square took the
curve instead.
- `ToolContext::point_tol`: anchors and direction handle ends are picked
within the selection tolerance, but at least 2 px past the drawn point
(4.5 px at the default Size 3, more with a larger Size). Anchors are
tested before segments, so where both are within reach the anchor wins.
- Direct Selection (presses, Highlight anchors on mouse over, blend spine
points and handles), the Anchor Point, Delete Anchor Point and Scissors
tools, and the Pen (its Alt conversions; its close/continue reach stays
5 px unless the points are drawn larger) use it. Segments, objects and
frame edges keep the selection tolerance.
- Of the topmost path with anchors in reach, the nearest anchor is picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every drawing tool now asks one snapper (guides::DrawSnap) for the points it
places: the Pen's and Curvature tool's anchors, the Pencil's ends, the shape
tools' start and dragged corner or radius (Rectangle, Rounded Rectangle,
Ellipse, Polygon, Star, Line Segment, Arc, Spiral, the grids), the Type tool's
click and frame and a new artboard's corners. Points land on other objects'
anchors, centres and paths ("anchor", "center", "path") or line up with their
anchors, edges and centres ("align"); hovering shows it before the press, the
Pen's guides end its rubber band, and the Pen lands on the path being drawn
too. Shift keeps a point to its 45-degree step (from Constrain Angle) or a
box's diagonal and slides it along that way into line with a target.
Preferences > Smart Guides > Construction Guides and Angles now act: a drawn
point near a guide through the point it leaves from lands on it.
Before, the Pen snapped only its press and showed nothing, and the shape tools
re-gathered targets on every drag step from the document showing their own
preview, so the dragged corner stuck to where the last step left it.
Performance: targets are gathered once per document state (keyed on the
document's uid and revision, now in ToolContext), from the art in the window,
and sorted, so the anchors, centres and lines near the pointer are found by
bisection. Leaving objects out of the targets no longer looks up each node's
ancestry (quadratic in the document's size): one pruned walk does it, which
also speeds up the Selection tool's moves and resizes.
The direction handles' HandleSnap (#494) is now a DrawSnap holding its own
targets (Targets::for_handle) for the drag: one cache, one lookup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reported: with the Pen there was no way to edit curves in place as Ctrl does in Illustrator on
Windows (Cmd on the Mac), segments couldn't be grabbed, and the curve-editing tools felt slow and
sometimes didn't take a handle.
- Cmd/Ctrl held at a press with any tool but a selection tool now borrows the selection tool in the
engine (Session::pointer), not in the canvas: the selection tool chosen last, or Direct Selection
for the Pen, Curvature and anchor tools until one is chosen. The tool lent to isn't deactivated,
so the Pen goes on drawing its path after the release while that path stays selected; it no
longer draws on another open path selected meanwhile. Agents reach it with pointer_gesture
mods.cmd. With Cmd held the pointer is the borrowed tool's. Choosing a tool or switching
documents mid-gesture gives the tool back first.
- Pen + Alt over a segment of a selected path reshapes it, as the Anchor Point tool does.
- The handles shown are the handles that drag (one helper for Direct Selection, the Anchor Point
tool and Pen + Alt): Direct Selection now drags the handles of a path selected as a whole (as
the Pen leaves it, so Cmd + drag of a handle while drawing works), the Anchor Point tool no
longer grabs handles that Show handles when multiple anchors are selected hides, the nearest
handle wins, and a handle shorter than the tolerance leaves its anchor to be picked. The anchor
tools pick within Selection & Anchor Display > Tolerance instead of a fixed 4 px.
- path.reshapeSegment keeps a smooth anchor at either end smooth (its other handle turns with the
moved one) instead of kinking it.
- A dragged handle gathered its smart guide targets from the whole document on every pointer move
(21 ms per move on 20,000 paths): HandleSnap now gathers them once per drag (1 ms).
vectorcraft-cli perf measures handle and segment drags on a 5,000-anchor path.
- catalog::is_selection_tool and catalog::edits_anchors replace the UI's own lists.
- Tests in tools, engine and MCP (headless pointer_gesture); docs/mcp.md, control-protocol.md,
ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Preferences › Type › Type Object Selection by Path Only was stored and never read.
On, the Selection tools pick type on its type path only — point type's baseline
(the line the selection marks under it, across its layout's width), area type's
frame, type on a path's path — within the selection tolerance; a click among the
glyphs or inside the frame selects nothing. Off (the default), anywhere in the
type's bounds selects it, as before.
`HitOptions` gains `type_path_only`, set by the tools' context (`hit_options()`)
and the canvas's `hit_at` from the preference, so the Selection tools, Cmd-click
behind, object highlighting and the context menu agree. Tests at the hit-test
level (point, area and on-path type) and through the Selection tool with
`prefs.set`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Color, Alignment Guides, Anchor/Path Labels, Measurement Labels,
Transform Tools, Object Highlighting and Snapping Tolerance are read:
- tools: `guides::GuideStyle` on `Targets` (`styled(cx)`) colours the
lines and labels and leaves them out when their option is off, the
snap itself unchanged; `ToolContext` gains the six fields and
`snap_tol()`, replacing the 5 px literal for every smart guide snap
(drawn points, moves, bounding-box handles, ruler guides, artboards,
reference points). The tools gate their `Overlay::Measure` readouts on
Measurement Labels (drawing, moving, ruler guides, artboards) or
Transform Tools (scaling, rotating, Free Transform, transform tools).
- engine: `with_tool_cx` fills them from `Prefs` (the colour parsed, magenta
as fallback); the colour's default is `#ff3dfc`, what the tools drew.
- ui-egui: the hover outline needs Object Highlighting and Smart Guides.
- Tests in tools (guides, select), engine (tests_prefs) and the canvas;
docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Guides dragged out of a ruler did not snap at all (only Shift to the ruler's
ticks): they now go through the engine (`Session::ruler_guide`, a
`NewGuide` previewing `guide.add`, one undo step) and snap as a moved guide
does: with Smart Guides to the edges, centres (so the sides' midpoints) and
anchors of the art and of the artboards, labelled; with Smart Guides off,
View > Snap to Point pulls new and moved guides onto anchors. Moving art
with the Selection tool already snapped flush to artboard edges and centres
with Smart Guides on; a test now covers it.
Artboard guides: `Guide.artboard` holds an artboard id (written only when
set, so canvas guides save as before and older files open unchanged).
`guide.add {artboard}` makes one, `guide.list` reports it; a guide dragged
out of a ruler with the Artboard tool belongs to the active artboard. It is
drawn, picked and snapped to across its artboard only, moves with it
(`artboard.move`, a pure move in `artboard.setProps`, `artboard.rearrange`),
is copied with it (`artboard.duplicate`, Alt-drag copy) and deleted with it
(`artboard.delete`, the guide selection kept in step).
Guides as Layers rows with their own lock and hide (part d) stay open: ruler
guides are not layer nodes; Lock Guides locks them all, and Make Guides
paths are Layers rows already. Listed in the ROADMAP parity row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourteen more Preferences options that were stored but read by nothing now
act, for the mouse and for agents (prefs.set, then pointer_gesture,
press_key or the commands):
- Selection & Anchor Display: Snap to Point and its distance (with Smart
Guides off, View > Snap to Point lands a dragged selection's grabbed
point, drawn points and reference points on anchors and ruler guides);
Move Locked and Hidden Artwork with Artboard (artboard.move, the Artboard
tool and Rearrange; off, hidden art now stays too); Enable Rubber Band for
the Pen and Curvature tools; Handles (solid, hollow, large);
Show handles when multiple anchors are selected (canvas and Direct
Selection's handle picking); Hide Corner Widget for angles greater than.
- General: Transform Pattern Tiles is the default of a new `patterns`
param on object.transform/move/rotate/scale/reflect/shear/transformEach
(journalled when the art uses a pattern), and the transform dialogs get a
Transform Patterns checkbox; Select Same Tint % (off, Select > Same
Fill/Stroke Color takes every tint of a global or spot swatch).
- Type: new type.step {attribute, by} steps size, leading, tracking, kerning
and baseline shift by the Size/Leading, Tracking and Baseline Shift
increments; Increase/Decrease Font Size (Cmd+Shift+. and Cmd+Shift+,);
the Type tool's Alt+arrows (kerning at a caret or tracking, leading,
Shift for baseline shift, Cmd/Ctrl for five steps). Enable Missing Glyph
Protection keeps characters a new font lacks in the font that had them
(text.setStyle, text.setRangeStyle). Fill New Type Objects With
Placeholder Text: type the Type tools place starts with placeholder text,
selected (text.create / text.createInPath take `placeholder`).
Units > General, Stroke and Type were already the single source of truth
(units.rs). Auto Size New Area Type, Show Font Names in English and
Highlight Alternate Glyphs need subsystems the app doesn't have yet and
stay open with the rest of #394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of the rulers could not be touched again: no tool hit-tested
them, so a click on a guide went to the art under it.
- The Selection, Direct Selection and Group Selection tools pick a ruler guide
within the selection tolerance (over the art; Direct Selection takes an
anchor on it first) through a shared tools::rulerguide::GuideEdit. A drag
moves the selected guides in one undo step (Alt copies them, Shift snaps the
dragged one to the ruler's ticks, otherwise it snaps to pixels, the grid or,
with Smart Guides, the art's edges, centres and anchors); dropped off the
canvas onto its ruler, the guide is deleted. Hidden or locked guides can't be
picked; the pointer shows which way a guide moves.
- Selection::guides holds the selected guides (on their own, like slices); the
canvas draws them in the selection colour. Delete/Backspace (edit.clear)
delete them, the arrow keys (object.nudge) nudge them, Lock Guides and Hide
Guides deselect them.
- Commands for agents: guide.list, guide.select {indexes, toggle?},
guide.move {dx?, dy?, copy?} (besides {index, pos}) and guide.remove {index?};
guide positions out of range are refused. Documented in docs/mcp.md.
- Shift while dragging a new guide out of a ruler snaps it to the ticks too
(Unit::ruler_step, shared with the rulers' drawing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fifteen Preferences options were stored but read by nothing. They now act,
through the existing plumbing (ToolContext for the tools, the prefs read by the
canvas for the view), and reach agents through prefs.set:
- General: Show Tool Tips (off: no widget's tool tip comes due), Double Click
To Isolate, Zoom with Mouse Wheel (the wheel zooms about the pointer,
Shift-wheel scrolls up and down, Cmd/Ctrl-wheel sideways), Use Precise
Cursors (Pen, Eyedropper, Slice and Blend pointers become a crosshair).
- Selection & Anchor Display: Tolerance (objects, anchors and handles, in
place of the fixed 3 and 4 px), Object Selection by Path Only (compound
paths too), Command Click to Select Objects Behind (cycles down the objects
under the pointer; not when Cmd only borrows the selection tool), Zoom to
Selection (Zoom In/Out centre the selection), anchor Size, Highlight anchors
on mouse over (Direct Selection).
- Type: Number of Recent Fonts (up to 15 Recent Fonts slots).
- Guides & Grid: guide and grid Color and Style (lines or dots), Grids In Back.
The canvas's context menu, panel drops and hover highlight pick objects like
the selection tools. The control channel gets ui.wheel (with modifiers held
like ui.click) so agents can turn the wheel. The rest of #394 stays open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing a perspective tool shows the grid, but the canvas also re-selected the tool after a
Cmd-drag with the borrowed Selection tool, so a grid hidden with the tool chosen came back after
any Cmd-drag. `Session::switch_tool` (and the app's `restore_tool`) switch without choosing; the
temporary-tool return uses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid was drawn whenever its `visible` flag was set or a perspective
tool was active, and choosing the Perspective Grid tool (Shift+P) didn't set
the flag. So with the tool chosen, View > Perspective Grid > Hide Grid
(perspective.grid.show) turned the hidden flag on instead of off and the
grid stayed on screen however it was toggled.
Choosing a perspective tool now shows the grid (sets `visible`, view state,
no undo step), and the grid, its widget and the Perspective Grid tool's
handles are drawn only while it is visible. Hide Grid hides it with the
tool still chosen; choosing the tool again shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Between paths, the Pen now adds an anchor where a click lands on a
segment of a selected path and deletes the anchor a click lands on,
with the add and delete cursors while hovering, as in the reference
app. The ends of a selected open path still continue it. Shift held,
or General > Disable Auto Add/Delete (a stored preference nothing read
until now, passed to tools as ToolContext::auto_add_delete), starts a
new path instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Typing with an input method (the macOS Japanese IME and the like) used to
insert the raw keys (romaji came in as ASCII): egui's Ime events weren't
handled.
- Tools gain `ime_preedit` / `composing` / `ime_caret`; the Type tool lays
the marked text out in place inside its typing session, underlined (the
clause being converted thicker), and commits it through `text_input`.
Character ranges from the IME convert to byte ranges in one place. A
cancelled composition leaves no empty undo step; an empty clear with
nothing marked never deletes the selection.
- The UI sends Text and Ime events to the tool in order, sends IMEOutput
every frame while text is edited (what lets egui-winit enable the IME
and place its candidate window at the caret, or the converting clause),
and holds back keys, Enter/Escape, clipboard, single-key shortcuts and
menu commands (Undo, Cut, Select All… also from the native menu) while
composing. A click, a tool switch or a style change ends the
composition with the marked text kept as typed; on macOS the IME is
told to discard it (NSTextInputContext.discardMarkedText) so it doesn't
come back in the next input.
- Undo during a typing session also ends the Type tool's session, so its
caret and marked text follow the document.
- Tests: tools (char → byte ranges, underlines and candidate position),
engine (compose → commit is one step, cancel leaves no step, a click
commits, Undo mid-composition is safe), ui-egui (synthetic Ime events:
compose, commit, ⌘Z held back, IME output, click and app switch).
Checked by hand on macOS 27 with the Japanese IME (romaji input, convert,
commit, cancel, Undo/Redo after commit, click away, Latin mode, app
switch). Not checked: Windows and Linux IMEs, the web build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Grid tool's left and right ground-level points move the whole
grid; the left and right extents are separate (extentRight; Alt drags both,
Shift goes by whole cells); a cell size widget sits up the line where the planes
meet; Shift keeps a vanishing point on the horizon and the ground points and
origin on one axis. The Plane Switching Widget stays put in a corner of the
document window (ViewInfo/ToolContext carry the window as a ScreenFrame), takes
its clicks with any tool while the grid shows (the Perspective Selection tool
too while it's hidden), and 1-4 pick the left, horizontal, right and no plane.
Double-clicking the Perspective Grid tool opens Perspective Grid Options
(show the widget, its corner; perspective.widget.options, kept with the
preferences).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Holding the brush still keeps Twirl, Pucker and Bloat applying, scaled by the
time held: a new Tool::tick (time supplied by the host: canvas frames, or
`holdMs` on ui.pointer / pointer_gesture events) repeats the last point every
0.1 s, one more dab there. Liquify never touches graphs, meshes, type, symbols,
images, or envelopes, repeats and blends with their contents, nor guides in
selection mode; those under the brush come back in `skipped` with a `warning`
that the status bar shows (UiRequest::Status). A drag applies only the dabs
each new sample adds (the stroke's state is kept between previews), giving the
same result as the whole stroke, so journal replay still reproduces it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tool keeps its options (a table in vectorcraft_tools::settings) when another
tool is chosen, across document switches, and in the saved preferences
(Prefs::tool_settings). The 7 Liquify tools share one set of Global Brush
Dimensions; the Symbolism tools share their brush. tool.setOption takes
{values} and a `tool` (another tool's options are stored for later), returns
the options, and works headless (MCP host command).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking with the Type tool runs text.create at once, and ending the edit
(Escape, another tool, a click elsewhere) only stopped editing, so every stray
click left an invisible empty text object and a "Type" history step.
The Type tool now remembers the point type its click placed and, when editing
ends with it still empty, runs the new text.discardEmpty command: it removes
the text and, when nothing else changed since the step that created it, drops
those steps so neither the document nor the history keeps a trace. A command
from outside the tool that takes the edited text out of the selection
(Deselect, a Layers panel pick) or removes it now ends the edit too
(Tool::after_command). Dragged area-type frames and type in or on a path keep
their frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Slice tool (Shift+K) drags out a user slice (Shift square, Alt from the
centre, snapping to ruler guides) as one undo step through
object.slice.create. The Slice Selection tool selects slices (Shift
toggles, object.slice.select), moves them (object.slice.move; object
slices move their objects), resizes a user slice by its handles
(object.slice.setRect), opens Slice Options on a double click and deletes
with Delete (object.slice.delete). Hidden or locked slices can't be
picked. Both tools have cursors drawn in code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copy and Cut also offer other apps a PNG of the copied objects, a PDF
with On Copy: PDF, and plain text when every copied object is type
(clipboard.flavours; clipboard.exportPng {scale?}, exportPdf,
exportText). Paste outside text editing takes what another app copied:
SVG, then PDF (clipboard.importPdf), then plain text as point text
(clipboard.importText), then a bitmap embedded at the view centre
(clipboard.importImage {dataBase64, mime?, center?}); pasting our own
copy keeps the lossless internal clipboard, and Cmd+V pastes a bitmap
that comes with no text. Services gains system_clipboard
(SystemClipboard: write, holds_ours, read, has): on Windows every
format at once, on macOS and Linux one (the text, else the PNG); the
web keeps SVG text only. With When pasting text: Keep Plain Text, text
the Type tool copied pastes without its formatting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The General unit is the active document's units: Preferences > Units >
General sets them (one undo step) and is the units new documents start
in (and the unit shown with no document open); Document Setup changes
only the document. The Transform panel, Properties, the Control bar, the
Info panel, rulers, the status bar, Align spacing, Tabs, paragraph
indents, Pattern Options, dialog distances (Move, shape sizes, path
dialogs, Artboard Options, effect distances, Transform Each, parameter
dialogs), New Document and the canvas measurement labels (smart-guide
sizes, moves, the Measure tool, the Live Corners radius) all follow it,
live. Units > Type drives font size, leading and baseline shift; Units >
Stroke also reaches the Appearance panel and the Magic Wand weight
tolerance. Typed units ("5 mm", "12 pt") work in any field; all ten
units are choices; length preferences show in their unit and accept a
unit; offset/simplify/grid/type-size params read typed units. Typed text
starting with a multi-byte character no longer panics the parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shipped code no longer unwraps, expects or panics: every one of the 124
unwrap()/expect()/panic!/unreachable! sites outside tests now handles the
failure (Result/Option, ?, let-else, defaults) and reports errors to the user.
- Lints: workspace clippy denies unwrap_used, expect_used, panic, todo,
unimplemented and unreachable; clippy.toml allows them in tests, and
integration tests, examples and testkit opt out explicitly.
- Safety net (vectorcraft_engine::guard): a panic in a top-level command rolls
the document back and returns EngineError::Internal; a panicking tool is
reset; the MCP server answers with an internal error and keeps serving; the
UI frame and each control request are guarded.
- APIs that hid failures now return them: Rendered::to_png/to_jpeg/to_webp
return Result (JPEG/WebP errors used to write empty files),
FontDb::face returns Option, Region::top returns Option.
- Fuzzing: engine/tests/import_fuzz.rs feeds garbage, hostile and mutated SVG
and PDF through import → render → export (30k cases locally, no panics).
- Docs: AGENTS.md/CLAUDE.md rule, docs/development.md "Robustness" section,
README pointer and a PR template checklist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Use Preview Bounds on, the Transform panel, Properties and Control bar
X/Y/W/H, the Selection tool's bounding box, Align, Distribute and
Distribute Spacing measure visual bounds (the whole stroke). setBounds sets
the visual box, scaling the path so that kept or scaled strokes land on
the typed size. object.align/distribute/distributeSpacing take
bounds?: "preview"|"geometric"; the Align flyout item shows and toggles the
preference through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking the Eyedropper opens Eyedropper Options (dialog
eyedropperOptions): raster sample size (point, 3x3, 5x5) and Picks Up /
Applies trees (transparency; focal fill colour, transparency, overprint;
focal stroke colour, transparency, overprint, weight, cap, join, miter,
dash; character and paragraph attributes). The options live in the
preferences (Prefs::eyedropper, eyedropper.setOptions, prefs key
eyedropper) and replace the earlier appearance/transparency switches.
appearance.copyFrom takes pickUp/apply overrides, reverse (Alt-click:
the selection's attributes onto the clicked object) and append
(Shift+Alt-click: add the source's fills and strokes). Type copies font,
size and paragraph attributes to type. Clicking an image samples its
pixels; sampled colours keep their colour model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
paint.freeform.addPoint/setPoint/deletePoint/addLine/splitLine/selectPoint
and the paint.freeform.get query edit the freeform gradient behind the active
proxy (one undo step each; errors on other paints). The session keeps the
selected point. The Gradient tool on a freeform gradient selects and drags
points, adds points on the art (joined in Lines mode) and on lines, and
deletes the selected point. The Gradient panel shows the Draw toggle and the
selected point's colour, opacity, spread and Delete Point; the Color panel
recolours the selected point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Gradient tool handles (a drawn vector's start and end, the end handle and the moved start) snap to anchors, edges
and smart guides, with the guide overlays; Shift constrains to 45° steps from the Constrain Angle preference
(`ToolContext::constrain_angle`, `constrain_angle_from` in geom). Double-clicking a toolbar button runs the new UI
command `tool.options {tool}`: the Gradient tool opens the Gradient panel, the Eyedropper opens Eyedropper Options
(`eyedropper.setOptions {appearance?, transparency?}`, which `appearance.copyFrom` honours and its params override).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The double-click that opens the popover lands outside it in the same frame, so the popover
closed as soon as it opened; only a later click elsewhere closes it now. The selected stop
remembers the document, first selected object and proxy it was picked on (Session::selected_stop),
so selecting other art or toggling Fill/Stroke no longer lets Delete or the arrows edit a stop
on a different gradient.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking a fill or stroke row runs appearance.setActiveItem; the toolbar,
Control bar and Properties proxies and the Color, Swatches, Gradient,
Stroke and Transparency panels show and edit that item, and the gradient
tool's annotator follows it. paint.setFill/setStroke, stroke.set/
setAdvanced, paint.editGradient/setGradientGeom and transparency.set take
item (omitted: the active item, null: the top one). Item edits and the
appearance.* commands address the selected objects' own stacks, so a
group's own fills no longer leak into its contents. Any selection change
clears the active item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic
wstock
EthanSuquet
theironchef
imachus
Brandon Thomas