With nothing selected, Stroke panel edits (stroke.set / stroke.setAdvanced: cap, join, dashes,
arrowheads, profile...) and a graphic style clicked in the Graphic Styles panel
(graphicStyle.apply, add too) set up the next object drawn: its stroke options, fills, strokes,
effects, opacity and blend mode, linked to the style. The Appearance panel's New Art Has Basic
Appearance (appearance.setNewArtBasic, preference newArtBasic, on by default) now works: off,
new art takes the whole appearance of the last selection. paint.default resets the template,
appearance.newArt reports it, and with nothing selected the Stroke panel shows its stroke and
the Appearance panel its rows. PaintDefaults gains the template appearance, opacity, blend
mode and style.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a width point opens Width Point Edit (Side 1, Side 2, Total Width, a link
keeping the sides equal, Adjust Adjoining Width Points, Delete; dialog `widthPoint`, also
`ui.widthPointEdit`). Shift-click selects several width points, which drag and widen together
as one undo step; Alt-dragging a point's centre copies it (`stroke.widthPoint.copy`); dropping a
point onto another makes a discontinuous point (two points at the same t), and the stroke's
width steps there. `stroke.widthPoint.set` takes `adjustAdjoining`, keeps a discontinuous point
when only its widths change, and `stroke.widthPoint.remove` takes `indices`. Flipping a profile
along the path swaps the sides of its steps; `document.inspect` reports `widthPoints`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CMYK document that shows transparency is drawn once per ink plane
(complemented C, M, Y; complemented K as a grey) so every blend mode,
opacity, group, knockout and effect composites inks, PDF-style; the
planes' inks are shown through the working CMYK profile (cached 4-D XYZ
table). Cyan multiplied over magenta now shows C100 M100. Opacity masks
keep screen luminance; RGB colours and placed images are separated
first. RGB documents and opaque CMYK documents keep the screen-colour
path.
PDF export of CMYK documents writes its transparency groups with
/CS /DeviceCMYK (luminosity mask groups stay RGB) and puts top-level
transparency in a non-isolated page-wide group so it blends in CMYK too.
Flatten Transparency composites CMYK documents ink by ink and makes CMYK
regions. Non-separable modes no longer give NaN for greys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a colour group's folder in the Swatches panel, or the options
button (Edit or Apply Color Group) while a group is selected, opens Recolor
Artwork on the group: without art the rows are the group's colours and OK
rewrites the group; with art selected the art is reduced to the group's size,
takes its colours, and art and group change in one undo step. New
swatch.editGroup {group, colors, rename?} rewrites a group in order (art linked
to its global swatches follows); recolor.apply takes group, groupColors and
rename.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recolor Artwork keys colours by identity (model and exact values), so CMYK
colours stay CMYK and lookalikes stay apart. recolor.reduce groups the
selection's colours into rows (k-means in Lab, weighted by use; tints of a
global swatch share its row) with Preserve White/Black/Grays and Limit to
Library; recolor.apply maps rows by Exact, Preserve Tints, Scale Tints, Tints
and Shades or Hue Shift; recolor.randomize shuffles or varies new colours.
The dialog has Assign (rows with merge, separate, exclude, randomize, method,
library) and Edit (hue/saturation wheel with linked or unlinked handles,
brightness, harmony rules) tabs, and Edit Colors gains Recolor with Preset
(1/2/3 Color Job, Color Library). Colour parameters accept colour keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourteen dialog openers (swatch, colour, style, flattener, expand, effect and
parameter dialogs) are drawn on a 1000 pt and a 2000 pt tall screen; each
dialog must be the same height on both, so nothing inside one fills the
available height again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Use Preview Bounds on, the Transform panel, Properties and Control bar
X/Y/W/H, the Selection tool's bounding box, Align, Distribute and
Distribute Spacing measure visual bounds (the whole stroke). setBounds sets
the visual box, scaling the path so that kept or scaled strokes land on
the typed size. object.align/distribute/distributeSpacing take
bounds?: "preview"|"geometric"; the Align flyout item shows and toggles the
preference through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scaling with Scale Strokes & Effects on now scales stroke weights, dash
lengths and dash offsets and every distance parameter of object, fill and
stroke effects (groups and layers too), from new length metadata in the
effects catalogue. Off, nothing painted changes size and type keeps its
character strokes' weight. Scale Corners off keeps live corner radii.
object.scale/transform/transformEach take strokes?/corners? (default: the
preferences) and journal the values they used. The Scale dialog and a new
Transform Each dialog get both checkboxes, kept as the preferences on OK;
the panels' toggles go through prefs.set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours gain a CIE Lab model (`Color::Lab {l,a,b}`, serde tag `lab`), handled through the
CMS (display, separation, conversions, gamut), tints (toward paper white), keep_model, harmonies,
recolouring, blends, Info and the Color panel. Swatch Options gets a Lab mode
(`swatch.edit {mode: "lab"}` / `{color: {l,a,b}}`), and colour params accept `{l,a,b}`.
Swatches panel → Spot Colors… (`ui.spotColors`, dialog `spotColors`) runs `swatch.spotOptions
{useLab}` (Document.spot_use_lab, default on): Lab spot colours show and separate from their Lab
values, or art linked to them takes their working-CMYK equivalents, as one undo step. PDF export
writes Lab spot inks as Separation spaces with a Lab alternate (tint function from paper white),
or a DeviceCMYK one with CMYK equivalents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[Registration] is a built-in swatch that prints 100% on every plate: Separations
Preview shows it on each process and spot plate and PDF export writes it as
/Separation /All. It can't be edited, moved, duplicated, merged or deleted;
swatch.list shows it after None and the Swatches panel applies it as a swatch.
Object > Create Trim Marks strokes the marks in Registration and marks every
artboard when nothing is selected ({style?, allArtboards?}). The preference
japaneseCropMarks (General) switches to Japanese marks: double lines at the
trim and bleed edges plus centre marks. Effect > Crop Marks (cropMarks) is a
live effect whose marks follow the object; rendering, SVG/PDF export and
Expand Appearance draw them. The mark geometry lives in doc::marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Attributes (Cmd+F11) shows Overprint Fill/Stroke, Show/Don't Show
Center, Reverse Path Direction Off/On, the non-zero / even-odd fill rule,
Image Map, a URL field with recent URLs and a Browser button, and a note.
New commands attributes.set and path.setFillRule; path.reverse takes ids and
reversed; attributes.info reports every value. Objects keep the attributes in
Node.attrs. SVG export wraps linked objects in <a>, and import reads links
back. The canvas draws the centre point of selected objects that show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sweep compares a curve with another segment over a y-span shorter than
its tolerance by bounding boxes only, so an edge rising by less than that
tolerance (e.g. a rectangle edge cut through a circle's cap, whose computed
intersection end sits ~1e-12 off the horizontal) was mis-ordered and the
result lost a corner: xor/difference/area disagreed by up to 10%. Every
sweep input now snaps on-curve y values within the tolerance to one level
(handles follow and are levelled with their anchor), so such edges become
exact horizontals, which the sweep handles exactly.
- tests/regressions.rs: the six minimal failures found by the properties,
the root cause in isolation, and the self-crossing "star" polygon.
- The star-polygon strategy rejected no angular step of half a turn or
more, so it sometimes drew self-crossing polygons (the shoelace failure).
- Property suites run from a fixed seed (PROPTEST_CASES / PROPTEST_RNG_SEED
still override), so CI cannot fail at random.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object > Expand… opens a purpose-built dialog (Object, Fill and Stroke
checkboxes, disabled when the selection has nothing for them; Expand
Gradient To: Gradient Mesh or Specify N Objects, default 255). Every
option now does something:
- Object: type to outlines, live shapes to paths, effects baked.
- Stroke: strokes outlined into filled paths.
- Fill: linear/radial gradient fills become N solid rectangles or
concentric ellipses, or a gradient mesh with lines where the colour
changes, inside a clip group shaped like the object; freeform
gradients become a mesh shaped like the object. Colours keep their
stops' colour model. With Fill off gradient fills stay live.
object.expand {} defaults match the dialog (stroke now defaults on);
new query object.expand.info and UI command ui.expandDialog.
Create Gradient Mesh on a gradient-filled object takes the colours the
gradient paints at each point (GradientMesh::for_path_with, from_grid,
highlight).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paint given to a clipping path (paint commands with its id) now shows: its
fill paints inside the clip behind the clipped art and its stroke over the
art, unclipped, on the canvas and in SVG and PDF. Node::clip_paint splits the
clipping path into its fills and its strokes (type: its characters' too) for
all three outputs; the renderer caches the parts per clipping path. Clip group
visual bounds take in the stroke. Make Clipping Mask still leaves the clipping
path unpainted, as the reference app does; Ungroup no longer wipes a painted
clipping path's appearance (Release already kept it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
view.transparencyGrid {on?} -> {on} is now an engine command (DocState.
transparency_grid; not undoable, doesn't dirty the document), so agents can
turn the grid on headless and each open document keeps its own setting. The
menu item, its Show/Hide label, the shortcut and the Properties panel button
use the same id; the canvas draws the grid for the active document only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Exported masks carry data-vectorcraft-mask="noclip invert" (the options that
differ from clipping, not inverted). Import restores the flags and the original
mask art, dropping the backdrop rectangle and inverting filter group that draw
the options in SVG; a single mask object comes back as itself, not wrapped in a
group. Masks from other apps import as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
transparency.viewOpacityMask {on?, id?} shows only the opacity mask on the
canvas as greyscale coverage (luminance, clip and invert applied; the rest of
the art hidden) and enters mask editing; called again it shows the artwork and
keeps editing. The Transparency panel's mask thumbnail runs it on Alt-click and
is outlined in the accent colour while the mask is viewed. The state is
DocState.mask_view (shown while that mask is edited: DocState::shown_mask) and
reaches the renderer as RenderOptions.mask_view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Graphic Style Libraries and the Graphic Styles panel's library button open
read-only libraries of original styles generated in code (Shadows and Glows, Outlines
and Rules, Hand-Drawn, Gradient Finishes, Shape Effects, Blends and Transparency) in
the shared library panel. Clicking a style adds it and applies it to the selection as
one undo step (Alt: on top). Save Graphic Style Library writes .vcstyles JSON (styles
unlinked from swatches, with the patterns they paint with) to the user library folder
(User Defined) or a file; Other Library loads one, or another document's styles.
Commands: graphicStyle.libraries, graphicStyle.library, graphicStyle.addFromLibrary,
graphicStyle.saveLibrary, graphicStyle.loadLibrary; UI: window.graphicStyleLibrary
(.other), ui.saveGraphicStyleLibrary, window.userGraphicStyleLibrary1-10. The user and
loaded library bookkeeping is shared with swatch libraries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paths and compound paths now measure their visual bounds along their shape:
the body (inside/outside alignment, the width profile's widest point), the
tips of the miter spikes the limit keeps, projecting caps' corners and the
arrowheads' reach. A rectangle's right-angle miters stay within half the
weight (Fit to Selected Art, Rasterize and all-art SVG export get tighter,
exact boxes); Appearance::outset is the conservative reach for anything else.
Clicks hit what the strokes paint: outside strokes outside the path (0.8 x the
weight out), inside ones inside, the profile's width where clicked, caps,
spikes and heads. Click culling keeps a cheap box (hit test 0.34 ms per click
on the 50k-path budget). The subpath/tangent helpers move from the stroke
geometry into vectorcraft_geom::bez so both share them; a cross-check test
holds every painted point of the real stroke geometry inside the bounds and
hittable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrowhead gains 30 original shapes generated in code, appended after the first
ten so saved names stay stable: Barbed, Half Arrow (left/right), Concave,
Double Arrow, Chevron, Feather, Swallowtail, Reverse Triangle, Triangle to Bar,
Kite, Leaf, Drop, Half Circle, Oval, Target, Tag (+ open), Diamond (open),
Hexagon (+ open), Star, Cross, Plus, Double Bar, Dot on Bar, Slash, Double
Slash, Bracket and Fork. Each is drawn in local units of the head's weight
inside the usual 4 x 4 box, with its own stop for the stroke under it.
Arrowhead::label() names them in the menus. The Stroke panel's arrowhead
dropdowns render every head as the canvas draws it (cached textures, a shared
widgets::doc_preview that the Brushes panel now uses too) in a scrolling list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Stroke panel's Profile list now holds saved profiles next to the built-ins,
kept with the preferences (Prefs.width_profiles). Add to Profiles… names the
selected stroke's variable width, Delete Profile removes the selected stroke's
saved one (built-ins can't be deleted), Reset Profiles removes them all.
Three more generated built-ins (Pinch, Teardrop, Wave). The dropdown (Stroke
panel and Control bar) lists saved profiles and draws a custom profile's own
silhouette. Commands: stroke.widthProfile.add/delete/reset/list; stroke.set
{profile} takes a built-in id or a saved name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
flattener.preview {highlight, overprints?, preset?|options?, ids?} reports, without changing the
document, the transparent and affected objects, patterns, outlined strokes and type, rasterized
complex regions, all rasterized areas and flat-colour regions (FlattenReport, worked out by the
flattener's own plan without rendering images). The panel previews a snapshot taken on Refresh,
greyed with the chosen highlight in red, zoomable (click, Alt-click, drag, double-click); its
Overprints, preset and options (Show Options) set how it flattens, and its menu saves them as a
preset. ui.flattenerPreview drives it; the settings persist with the UI state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saved presets live in Prefs.flattener_presets (persisted with the preferences) beside the
built-in High, Medium and Low Resolution ones, which stay read-only. New commands:
flattener.presets.list / save / delete / import / export (a .vcflattener JSON file; opening one
imports it). Any saved preset name works as `preset` wherever flattener options are taken
(Session::flatten_options). The manager dialog lists the presets and edits the selected saved
one in place; the Flatten Transparency dialog lists saved presets and gains Save Preset….
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The dialog offers the built-in presets, the raster/vector balance, both resolutions and the
outline and preserve switches; Preview flattens on the canvas through the interaction and OK
keeps it as one undo step (object.flattenTransparency). The options editor is shared for the
preset manager and the Flattener Preview panel. Drivable as dialog `flattenTransparency`
through ui.flattenTransparencyDialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Applying a gradient swatch records it as the gradient's swatch (the Swatches panel highlights
it and the Gradient panel's swatch menu marks it). A stop given a global or spot swatch (and a
tint) in paint.editGradient / a gradient paint's stops, dropped from the Swatches panel or
picked in the stop popover stays linked: editing the swatch recolours it, in art and in
gradient swatches, deleting it unlinks it. Spot stops separate on their plate, and a gradient
whose stops are all tints of one spot ink (or paper white) exports to PDF as a Separation
shading; gradients mixing models are written in one colour space (the PDF writer requires it;
mixed models used to abort the export).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour linked to a global or spot swatch keeps a tint (Paint::Solid.tint, 1 by default and
left out of files at 100 %): paint.setFill/setStroke {swatch, tint} apply the swatch at that
percentage, swatch edits recolour every linked colour at its own tint, and Color::tinted
resolves it (CMYK and Gray inks scale, RGB mixes toward white). swatch.new saves a tint as a
tint swatch ("Ink 40%") linked to its base. Spot tints separate as that percentage of their
plate (Separations Preview, PDF Separation value) instead of an ink-ratio guess. Adjust Color
Balance's Global mode (tint) shifts the tints of linked colours. The Color panel shows Tint
mode (the swatch chip, its name and a T slider) for linked colours; the Swatches panel
highlights the tint swatch in use. Gradient stops get the same link and tint fields (the
swatch walks cover them), so GradientStop is no longer Copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
effect.expandAppearance now expands the whole appearance: each visible fill becomes a
path of its own and each stroke its outline (a brushed stroke its brush art), grouped
in paint order under the object's id and transparency; geometry effects are baked and
raster effects become an embedded image (shadows below the art, blur/feather/inner glow
replacing it). Type with effects or its own fills is outlined, and a group's or layer's
own fills and strokes are expanded among its members. The command is enabled whenever
an appearance isn't basic. Builds on bake_leaf (effects::expand_leaf / expand_art) and
shares the raster-effect image code with PDF export.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking a Layers panel target circle runs `layer.target {id}`: a layer gets its art
selected and becomes the target (`Selection.target`) of the appearance, effect,
transparency and opacity-mask commands, which then edit the layer itself; the
Appearance panel lists it. Dragging a circle onto another runs
`appearance.transfer {source, target, copy?}` (Alt copies), dropping it on the trash
clears it. Filled dots also mark groups and layers with fills of their own, masked
objects get a dashed underline, and while an opacity mask is edited the panel lists
only an `<Opacity Mask>` entry and the tab says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking the Eyedropper opens Eyedropper Options (dialog
eyedropperOptions): raster sample size (point, 3x3, 5x5) and Picks Up /
Applies trees (transparency; focal fill colour, transparency, overprint;
focal stroke colour, transparency, overprint, weight, cap, join, miter,
dash; character and paragraph attributes). The options live in the
preferences (Prefs::eyedropper, eyedropper.setOptions, prefs key
eyedropper) and replace the earlier appearance/transparency switches.
appearance.copyFrom takes pickUp/apply overrides, reverse (Alt-click:
the selection's attributes onto the clicked object) and append
(Shift+Alt-click: add the source's fills and strokes). Type copies font,
size and paragraph attributes to type. Clicking an image samples its
pixels; sampled colours keep their colour model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Control bar and Properties Fill/Stroke chips show the proxies' paints
("?" for mixed selections) and open a popover with the Swatches panel body
(Shift-click or the toggle: the Color panel's mixer); a click brings the
chip's proxy forward through paint.toggleActive {fill}. The Properties
panel offers Recolor for multi-colour selections. Window panel shortcuts
(Color F6, Color Guide Shift+F3, Appearance Shift+F6, Graphic Styles
Shift+F5, Stroke Cmd+F10, Gradient Cmd+F9, Transparency Shift+Cmd+F10)
run window.panel {panel}, show in the Window menu and are editable.
paint.invert / paint.complement and the "?" state honour the Appearance
panel's active item; objects without bounds still show their paints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The mark left of Home (and in the About box) is now the VectorCraft app icon,
the engraved dragon from assets/app-icon/ (128 px PNG, include_bytes!), decoded
once per context into a mipmapped texture and drawn at 22 pt with the icon's own
rounded corners. The old code-drawn gradient square with a pen nib is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The window is undecorated off macOS and the app bar is the title bar: Minimize,
Maximize/Restore and Close caption buttons (46 pt, drawn in code, Close hover red)
at the far right, empty bar space drags the window and double-click toggles
maximize, and 5 pt invisible edge/corner zones resize it (off while maximized or
fullscreen). Close runs app.quit, so modified documents are asked about first.
The right-side group now fits the space after the menus: Discord drops out and
the search box becomes an icon at narrow widths, so nothing overlaps at 800 pt.
macOS and the web build are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object > Pattern > Tile Edge Color... picks the colour of the tile edge
(a layer-colour preset or a custom colour), stored in the preference
patternTileEdgeColor and passed to the renderer. Pattern Options gains
Show Swatch Bounds: a dashed outline of the part of the tiling the swatch
repeats (the period of brick and hex tilings).
Commands: prefs.set {patternTileEdgeColor}, pattern.options
{showSwatchBounds}, ui.tileEdgeColor. Model: PatternDef.show_swatch_bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic