Illustrator EPS and .ai type is made whole from the file's text
document, shown or hidden: point type, area type (a story in several
frames as threaded type that flows when the file opens) and type on a
path, with its fonts, size, leading, tracking, scaling, baseline shift,
fill and stroke colours (grey, RGB or CMYK), alignment, indents and
paragraph spacing. The page's drawing of that type, often in pieces, is
left out; where the text document can't say, type that shows still
comes from the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The report kept a placed document's LINKED FILES and FONTS inside its parent's list. Each document
now gets its own sections, the packaged one first and unchanged (no Document: line), then each
placed document's, headed by its file. Drops a debug_assert and an unneeded mut, runs rustfmt, and
documents the nested packaging in docs/mcp.md and the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Fonts adds only files a folder search found.
- macOS declares .suit as the extension of a font suitcase
(com.apple.font-suitcase), and the font scan reads a suitcase
whatever its name. A search considered only suitcases without an
extension. It now also considers files whose extension is .suit, in
any letter case, and reads one only when it is a suitcase font.
- Add Fonts copies at most 256 MB a file. A search also read larger
font files, and a search that found one for a font could end before
it found a smaller copy. A search now skips font files over 256 MB.
Docs: docs/mcp.md.
A folder search reads at most 8 MB of each font file. The suitcase
reader reads a suitcase font's resource fork whole, up to 256 MB.
Before this change, the search applied its limit to each font only
after that read. One search thread could read 256 MB from a single
suitcase and hold a copy of its fonts as well. The search now reads a
suitcase font only when its resource fork is 8 MB or less. The font
scan still reads each suitcase font's resource fork whole, up to
256 MB.
Docs: docs/mcp.md.
When a document opens with fonts that aren't available, fonts used
only in its symbols included, VectorCraft lists them in a Missing
Fonts dialog after the missing linked file questions, one document at
a time, with Find Fonts and Close. Find Fonts opens Type › Find Font
on the first missing font of the layers' type, to replace it. After
Find Fonts or Close the dialog doesn't open again for that open; when
another dialog replaces it, it opens again once that dialog closes.
Search Fonts Folder (the Fonts folder File › Package writes next to
the document) and Find in Folder… search a folder and its subfolders
for the fonts' files, and Add Fonts copies the files the user chooses
into a Fonts folder next to the preferences. The desktop app and
vectorcraft-cli read that folder with the system's font folders. Type
› Find Font has a Find in Folder… button too when fonts the document
uses are missing. The web app shows no dialog; a status message says
how many fonts aren't available.
- text.missingFonts lists each missing family and style once,
whatever version the document's type names, and leaves out CSS
generic families such as sans-serif. text.findFontFiles searches a
folder on up to 8 threads and returns at once; text.findFontFiles {}
reports the search, and {stop: true} stops it. A search reads only
what the font scan reads of font files (their table directories and
name, fvar and OS/2 tables) and, on macOS, of suitcase fonts, and
lists a file for a font only when the file makes the font resolve
exactly. It does not enter app packages, the Program Files and
ProgramData folders, the system's folders at the root of a volume,
the Shared and Public folders in Users, a home folder's Library,
AppData, Applications, snap and dot folders, a Library folder's app
data folders or the folders the environment names for apps, and it
skips other hidden folders and does not follow links below the
picked folder. It ends after 60 s by default, after 10,000,000
entries listed, with more than 1,000,000 folders waiting, after
10,000 font files read or 1,000 kept, or once every font has a file;
Stop and Close end it too.
- text.addFontFiles copies only files the last search found. Of
those, it copies only regular .ttf, .otf, .ttc, .otc, .woff and
.woff2 files and suitcase fonts with their resource fork, at most
256 MB a file and 1 GB in all. It never replaces a file: a file with
the same contents is kept, and when another file has that name, the
copy gets a number (Name 2.otf). The fonts are then scanned again,
and type set in them redraws.
- ui.missingFontsDialog and ui.findFontsInFolder open the dialog for
agents; docs/control-protocol.md lists its fields.
- File › Package gives a font file whose name has no font extension
the extension that matches its data (.ttf, .otf or .ttc).
- vectorcraft-text adds set_app_font_dir, which system_font_dirs
reads, WantedFonts, which reads a font file's names as the font scan
does, is_font_file and is_suitcase. #762 split its face reader, which
now takes read budgets: file_face_names_within tries the suitcase
reader first, and reader_face_names_within applies the budgets to
each font. vectorcraft-format adds write_new_with.
Docs: docs/mcp.md, docs/control-protocol.md, ROADMAP.
A letterhead saved by Illustrator 28 without PDF compatibility wouldn't
open: "its editing data can't be read (it ends inside a layer)". Its
layer starts with a /ForeignObject (non-native art: the content of a
placed PDF), whose /Data entry is the PDF as ASCII85 in comment lines.
ASCII85 includes `_`, so about one line in 85 starts with `%_`, which
the lexer reads as hidden tokens; a `(` in such a line opened a string
that swallowed the dictionary's end, the rest of the art and the
layer's LB.
The reader now skips to the data's `~>` after `/Data ,` in a
/ForeignObject, as it already did for a /Binary dictionary's ASCII85,
and leaves the non-native art out with a note (nothing draws its PDF
from the editing data yet).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017ZwZjADUZP4VzvrFGpiZch
- Fit to Artwork Bounds fits the art exports draw: hidden objects and
layers, guides and template layers don't count, and the bounds stop at
a layer's clip.
- The comparison with the page catches an object one draws that the
other doesn't (pixels whose neighbours all differ, away from type), a
light colour against white, and, for an EPS whose page is its art's
box, art the layers print outside it.
- textAs: outlines opens a .ai whose type shows from its PDF part, which
has the outlines.
- document.open takes editingData: false to open an Illustrator EPS or
.ai as its page or PDF part only, for print pipelines.
Part of #637.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
swatch.library.copyToUser {library} copies a library loaded from
another folder into the user library folder of the desktop app. A
.vcswatches, .gpl or .ase file is copied as it is; the swatches of a
document and a library loaded from the data or dataBase64 parameter are
written as a .vcswatches file. The copy gets a name that no file in the
folder has, and when a file with the same extension and bytes is
already there, that file is used. The library is then listed as User
Defined only. Until the app quits, commands given its loaded id use the
copy, unless another library is loaded under that id. Without a user
library folder (the web and headless sessions) the command is disabled.
A file with the same extension and bytes as a User Defined library
opens as that User Defined library. The unchanged original of a copied
.ase file is one such file. Graphic style libraries open the same way.
As in Illustrator, the Pen shows its continue cursor over an end of any
open path, selected or not, and a click there selects the path and draws
on from that end (reversing it from its first end). While drawing, it
shows a join cursor over an end of another open path, and a click joins
the two into one path, in one undo step, which finishes the path.
path.join takes {ids: [a, b], ends: ["first"|"last", "first"|"last"]}
to join the ends asked for (the Pen's join); without them it joins the
selected paths' nearest ends as before. Joining a path with itself, or
anything that isn't a path, is an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The font scan read only the macOS font folders and the Additional
Fonts Folder, so fonts that apps and font managers register with
CoreText from their own folders were missing from the font menus, and
exports set such type in the fallback font. CoreText's font manager
lists them with the installed fonts.
- `mac_fonts.rs` lists the files of the fonts the font manager has
available (`CTFontManagerCopyAvailableFontURLs`, through
objc2-core-text), keeping only file URLs as `open_documents.rs` does
(#433). The desktop app and `vectorcraft-cli` install it as they
install the DirectWrite lister on Windows, and the scan reads the
files outside the font folders in place.
- The scan leaves out faces with no outlines the font engine draws (no
glyf, CFF, CFF2 or VARC table), on every platform. CoreText lists
Apple's PingFang UI interface font (macOS 27), whose outlines are in
an hvgl table; if the scan cataloged it, PingFang SC would count as
installed, and Chinese characters in fallback text, Japanese kanji
included, would draw blank.
- Tests: the list holds the installed fonts by full path, a font
registered from another folder is listed while it is registered, and
a face without outlines the engine draws isn't cataloged.
The Save Swatch Library dialog lists Swatch Exchange (.ase) as a
format, and swatch.library.save takes format: "ase" or a path ending
in .ase. Each solid color keeps its model (RGB, CMYK, Lab or Gray) and
its type (spot, global or process), and color groups stay groups.
Gradients and patterns are left out, and a tint swatch is written as
the color it shows. Without a path or user: true, the command returns
the file as dataBase64.
A swatch exchange library opens under the name of its file. When Save
Swatch Library or Save Graphic Style Library saves to a file, the save
panel suggests the Name from the dialog as the file name, as a save to
User Defined does, and the web app downloads the file under that name.
A name made only of dots and spaces, such as "...", gives the file name
Library (Library.vcswatches) in place of a hidden file.
palette_io::write returns the file's bytes. A property test writes
generated libraries and reads them back, and an import fuzz test loads
mutated copies of a file the writer wrote.
The Libraries panel was a placeholder: it invited dragging art onto it,
but nothing happened. It now keeps local libraries (no account, no
cloud), as Illustrator's Libraries panel does:
- drag art off the canvas (or a swatch) onto the panel to add it, or use
+ to add the selection's graphic, fill or stroke colour, character
style or paragraph style;
- drag a graphic onto the canvas (or double-click it) to place a copy,
click a colour to paint the selection through the active Fill/Stroke
proxy, click a style to apply it to the selected type;
- the library picker and the panel menu create, rename and delete
libraries; each is a .vclibrary file in a Libraries folder next to the
preferences (session-only in the web app, headless sessions and runs
without preferences).
Engine: library.list/get/setCurrent/create/rename/delete/add/use/
removeItem. A graphic is stored as a native document with a thumbnail:
adding copies as Copy does and placing pastes as Paste does, resources
and swatch-name conflicts included. Using a style adds it to the
document and applies it in one undo step.
Clipboard::to_document gave its layer the id u64::MAX, which made a
saved copy overflow Document::fix_next_id when read back; the layer now
takes an id above the objects', and fix_next_id saturates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PDF writer defaulted to Convert Text to Outlines, so every glyph of
every page became a path: a text-heavy PDF grew several times larger on
export (a 7-page document went from 27 KB to 226 KB) and its text could
no longer be selected or searched. Illustrator's PDF presets embed font
subsets and keep live text; that is now the default too
(advanced.outlineText: false). Outlining stays available as an option,
fonts that can't be embedded still become outlines with a warning, and
printer's marks (page information) are drawn as shapes as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`artboard.setProps {scaleArt: true}` maps the art fully inside a resized
artboard (as Move Artwork with Artboard gathers it) and its artboard guides
from the old rectangle onto the new one, each side by its own ratio, in one
undo step, and returns the ids scaled. Strokes, effects and corners follow
Scale Strokes & Effects and Scale Corners (`strokes`, `corners`), pattern tiles
Transform Pattern Tiles (`patterns`); locked and hidden art follows
`lockedAndHidden` (default: prefs moveLockedWithArtboard). The resolved choices
are journaled, so a replay scales the same objects the same way. A move that
keeps the size scales nothing.
The Artboard tool's `scaleArt` option (saved with `moveArt`) makes handle
drags proportional, as the public help describes, keeps them proportional at
the 1 pt minimum, and leaves the scaled art out of the Smart Guide targets.
Move and Scale Artwork with Artboard are check boxes in the Control bar and
Properties' Edit Artboards; the artboard size fields there and in the
Transform panel pass the option. Translated in the eight catalogs that have
Move Artwork with Artboard. docs/mcp.md and the ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Such a file's PDF part is a placeholder page, which was refused. When
the file carries editing data, it now opens from that alone: its
structure as a PDF-compatible file's, its point type made from the text
document, and type it can't make (area type, type on a path) left out
with a note that marks the import as lossy. Without editing data, or
with pages picked or layers off, the placeholder is refused as before;
damaged editing data says so.
The page-order note is no longer given when the page has no type.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The layers reader of the editing copy (operators translated into
PostScript for the interpreter, any file with RGB colours, gradients,
transparency or images falling back to its page) is replaced by a reader
of the whole structure (import/ai): layers and sublayers with their
options, groups, compound paths, clipping groups and layer clipping,
names, hidden and locked objects, RGB, CMYK, grey, named and spot
colours, gradients, transparency, fill rule, overprint, embedded images
with their alpha channel, guides and every artboard, and objects drawn
as their look when they have several fills or strokes, effects or a
brush. Containers: Zstandard, zlib or plain data in EPS and .ai.
The text placement, the comparison with the page and the overwrite guard
stay around it. The page's type takes its text object's place without a
group; the comparison is by lightness, on nothing, without layers that
don't print. Symbols, pattern fills, placed files and unknown operators
make the file come in as its page where they show, and are left out of
layers that don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paragraph panel › Kinsoku Set (with the East Asian options) and `text.setFormat {kinsoku}`, as
decided in #633:
- Hard: today's set, so existing documents don't change; the default, and not saved.
- Soft: as Hard, except that 々, the prolonged sound mark ー (JLREQ cl-10) and small kana (cl-11)
may start a line: JLREQ's level 3 line-breaking rules (Appendix C.3). Half-width forms aren't in
those classes and stay off the line start.
- None: no kinsoku.
The setting reaches every break the composers consider (greedy, every-line and hyphenation
points). Reset Panel returns to Hard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Laser and cutter software skips HATCH entities, so shapes that were only
filled (type, traced art) reached it as nothing. Each filled area is now
written as its outlines (polylines and splines, in the fill's colour)
followed by the solid hatch; R12 keeps writing the outlines alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel laid out a row (with its thumbnail and several whole-document
lookups) for every open row each frame. A layer of 5,000 groups of 10 paths,
all open, took about 29 s a frame headless. Now the rows shown are listed once
per document change (with their layer colour and dimming worked out on the
way down) and ScrollArea::show_rows lays out only those in view: 0.4 ms a
frame. A row highlighted out of view is scrolled to.
The open rows move from UI state into the document's state
(DocState::layers_open, OpenRows): a document opens with only its top-level
layers open, and native files save the open rows (Document::layers_open,
written only when not the default, at save time like the view, so opening or
closing rows never marks the document modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Character panel menu › Character Alignment gains ICF Top/Right and ICF Bottom/Left, and
`charAlign` takes `icfTop` / `icfBottom`: a character smaller than the largest on its line lines
up its ideographic character face's top (right, vertical) or bottom (left) with the big one's.
`FontFace::icf_margins` places the ICF inside the em box as the OpenType baseline tags define it
(https://learn.microsoft.com/en-us/typography/opentype/spec/baselinetags): `icfb` / `icft` of the
BASE table's horizontal and vertical axes against `ideo` / `idtp` (else the OS/2 typographic
descender and one em), for Han ideographs (else kana, else the first script). Without them, as that
page allows, the average ink box of some ideographs and kana; a face without ideographs uses its
em box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
The DirectWrite font lister (#594) was installed in the desktop app only:
`vectorcraft-cli` (convert, run, MCP) didn't see fonts that font services
such as Adobe Fonts load on Windows, so its exports set such type in a
fallback font.
- The CLI shares the app's `system_fonts.rs` and installs it first thing
on Windows (not the win7 build). The text crate stays free of unsafe
code; the CLI denies unsafe code instead of forbidding it, so the
shared module's own allowance applies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File › Open, Other Library… and the User Defined library folder read
.ase files. Colors keep their model, global and spot colors stay global
and spot, and color groups stay groups. The library readers take a
file's bytes. On the web, File › Open passes a swatch library file to
swatch.library.load as dataBase64 instead of as lossy UTF-8 text.
Swatch and group names in a library are now unique, in .gpl files too.
Add to Swatches puts each color group of a library into one document
group when the document already has a swatch with the group's name.
The library fuzz helpers fail when a command panics.
Each paragraph has its own alignment, indents, spacing, hyphenation, tab
stops and paragraph style (TextObject.paras; para stays paragraph 0's, so
old files and readers work). Layout, editing (split/merge), threads, the
Paragraph/Tabs/Paragraph Styles panels, ranged text.setStyle/setFormat/
tabs/paraStyle.apply, SVG export/import and the fuzzers follow.
Area Type Options gain a fit: none, autoHeight (Illustrator's Auto Size:
the frame's height follows the text after every edit, resolved in
refresh_bounds inside the edit so it shares the edit's undo step) and
shrinkText {minPercent} (beyond Illustrator: overflowing text scales its
sizes, leading and baseline shifts down at layout time by the largest
factor, in 0.1 pt steps of the first run, that fits). The Auto Size New
Area Type preference now applies. text.areaOptions and document.inspect
report overflow and the shrink factor; the Area Type Options dialog
offers fit and first baseline as dropdowns.
A `.ai` file's PDF part is what apps that don't read VectorCraft's native
document open. It had no PDF layers: hidden layers and sublayers were left
out of it and everything else was flat page content.
- `.ai` files (Save As, exports, the CLI) write PDF layers unless
`createLayers` is false (a PDF standard still decides for itself).
- createLayers writes sublayers too, as optional content groups listed
under their layer's in `/Order`, hidden ones off with their art.
- A layer's form gets a box round the whole page instead of its art's
bounds, which readers made a clipping group of, gathering a layer's art
and its sublayers' in one group.
- PDF import: art inside a group, clip or form that dissolves into its
parent keeps the layer it was drawn in, so sublayers nested in their
layer's content import as sublayers.
- Save PDF: "Create PDF layers from layers and sublayers" (ja, es, it,
pt-br, ru, zh-hans, zh-hant).
Hidden objects (not layers) still aren't in the PDF part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Area Type Options > Align: Top / Center / Bottom / Justify (AreaOptions.verticalAlign,
LayoutOptions.vertical_align). Each row/column cell is aligned on its own; rectangular
cells shift their lines, other frames and text wrap reflow until settled without
losing text. Justify shares the leftover space equally between line gaps. Area Type Options
shows Align and First Baseline as dropdowns (the parameter dialog's choices table).
Font services load their fonts with GDI at run time, from files in their
own folders, without installing them: neither the font folders nor the
registry list them, so the font scan never saw them. DirectWrite's system
font collection holds them since Windows 10 1607.
- vectorcraft-text: `set_platform_font_files` lets the app name font files
the platform knows; each scan and each check for installed fonts asks
again and reads those outside the font folders. A file named by itself
is read whatever its extension (font services keep fonts in files
without one).
- The desktop app lists the local files of DirectWrite's system font
collection on Windows (`system_fonts.rs`, through the windows crate
already in the build), read in place.
- The check for fonts installed while the app was in the background runs
on a thread: DirectWrite's check for updates takes about 50 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator's Every-line Composer balances the breaks of the whole
paragraph for left/centre/right aligned text too, not only justified
text. VectorCraft only composed justified area text; ragged text was
always broken greedily.
- Model: ParaStyle.composer (vectorcraft_doc::Composer, re-exported by
vectorcraft-text), Every-line by default like Illustrator, saved only
when Single-line. layout() reads it from the object;
LayoutOptions.composer is now an Option override for tests.
- Composer: the justified gate is gone. Ragged lines never shrink (a
line that doesn't fit ends the node), badness is 100*r^3 with r = the
line's leftover space over a rag zone of 1/6 of the width (finite for
lines without spaces); the last line is free unless shorter than 1/3
of the width (measured in zones of 1/3), so a lone short word on the
last line pulls a word down. Hyphens cost 25 in ragged text (50 in
justified). Knuth-Plass fitness classes with adjacency demerits
(justified 10000, ragged 1000). Lines past the last width change
share one node key, active nodes are capped (4096) and paragraphs
over 200k glyphs break single-line, so work stays bounded; ragged
tries a tolerance of one rag zone, then any fitting breaks, then
falls back to greedy.
- text.setFormat {composer: "singleLine"|"everyLine"}; the Paragraph
panel menu's composer items work with a check mark (Reset Panel goes
back to Every-line).
- Tests: ragged Every-line moves "or" down in "Destroy all creatures
with toughness X or less." where greedy leaves "less." alone; the rag
of long paragraphs is no worse than greedy (sum of squared leftover
and of neighbour differences); Single-line is greedy; the 10k-char
layout budget covers ragged text; command test with undo; native
format round trip (rich_session's text is now Single-line).
No existing test needed changing: the justified tests and
hyphenated_layout_adds_hyphens (ragged, now Every-line) still pass.
Auto alignment (start of the paragraph direction) is ragged; a wrapped
line's Mojikumi flush opening bracket gives its half em back to the
composer, as in the line loop; tests cover Auto in both directions.
Layout of 10k chars, release: justified Every-line 5.6 ms, ragged
Every-line 5.8 ms, ragged Single-line 4.8 ms.
An SVG used as an animation rig lost its hidden alternates and their
rotation pivots: the exporter left hidden objects out (only hidden layers
could be kept), and the importer dropped data-* attributes.
- SVG export: hiddenLayers (on by default for document.save, as before)
now keeps hidden objects too, each written display="none" on its own
element (path, image, text or group). Exports still leave them out
unless asked; the CLI's convert asks, as a conversion keeps the
document.
- An object's own data: ObjectAttributes.data, the data-* attributes in
order (ours, data-name and data-vc-*, aside). The importer keeps them on
the objects and layers they belong to (at most 64 per element), the
exporter writes them back, the native format saves them (missing in
older files), and object.setProps {data: {key: value|null}} sets or
removes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
file.saveAs and document.save wrote a PDF-compatible .ai, but
document.export (and with it the CLI's run --export x.ai and convert
in.svg out.ai, and MCP's export) refused it as a format that can only be
opened, and --help didn't list it as writable.
The .ai encoder is now shared: save.rs's ai_params and encode_ai (a PDF
of every artboard with the PDF options, carrying the native document,
blank pages with pdfCompatible: false) serve Save As and the exports
alike. The .ai format is writable, so document.formats, --help and the
MCP export tool list it; an export leaves the document's own path alone.
Export As and Export for Screens keep leaving .ai to Save As.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Exporting one artboard of many to SVG wrote the whole document's art into
that artboard's file, the other artboards' art outside its viewBox: an
editor opening it showed every artboard's art. A file for an artboard
named in the export (Use Artboards with a range or All, Export for
Screens) now holds the objects over that artboard only, at any depth of
layers, as DXF's crop leaves them; objects reaching into it stay whole
and a clipping layer keeps all of its objects. An SVG with no artboard
named (Save As) still holds the whole document.
Part of #546: Export As with a range writes the chosen artboard alone in
SVG, DXF, PDF and PNG, each file with that artboard's art (tested from
the dialogs).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic
dotCooCoo
Reinhard Schuerer
DWAA1660
HT
imachus
storybored379
haven