The Fill/Stroke proxy stayed 36 pt and the Color, Gradient and None
buttons 7.5 pt in both toolbar layouts, so in two columns they sat small
in a wide strip and were hard to hit (in one column too). The proxy is
now 54 pt in two columns, the three buttons 11 pt in one column and
17 pt in two, and in two columns Draw Normal, Draw Behind and Draw
Inside sit side by side, each setting its mode (view.drawMode {mode}),
as Illustrator's two-column toolbar shows them; one column keeps the
button that cycles them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The snap targets of a copy were gathered when Alt went down, from the document
as previewed, where the original had already moved with the drag, so the
original was never a target where it stays. Now both target sets (for a move,
and for a copy, which includes the original) are gathered when the drag
begins, and Alt picks between them each frame: for Direct Selection drags by
an anchor and for whole-object moves (the Selection tool's, and Direct
Selection's from a segment or fill).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Character tightening and optical kerning space each glyph differently, as
Japanese titles often are. The importer evened a line out with one
tracking value (type on a path took none), leaving glyphs up to an eighth
of an em out of place. When the file's font is installed and one value
can't place every glyph, each character now keeps its own tracking,
measured along the baseline (along the path for type on a path).
Glyphs closed up by up to half an em (the proportional widths of CJK
punctuation) also continue their line instead of starting another.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing an anchor of paths that are all selected whole now moves them as
objects held by that anchor, so Alt pressed or released during the drag turns
the copy on and off (the original shows or not), as with the Selection tool.
The anchor keeps snapping all along, onto the original only while a copy
leaves it behind. With only some anchors selected the drag still moves just
those.
A committed move drag is now named for what it did in the end (Copy or Move),
for the Selection tool too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Alt-dragging a path by an anchor moved the copy with whole-object snapping
(bounds only, from the press point), so the anchor couldn't land exactly on
another anchor. Now the pressed anchor (its own coordinates, not the pointer's)
snaps as a dragged anchor does: onto other paths' anchors and segments and
Smart Guides, and onto the original the copy leaves behind. The history says
Copy for an Alt-drag.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Alt-pressing a segment already picked the whole path and Alt-drag copied it,
but a press on an anchor ignored Alt and only moved the selected anchors. Now
Alt on an anchor picks the whole path too, so Alt-drag duplicates it as the
Selection tool's does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A path with all its anchors selected is stored whole (no partial entry), so
pressing one of its anchors looked unselected and replaced the selection with
that anchor alone; the drag then moved just it. Now an anchor of a path
selected whole counts as selected: the press keeps the selection and the drag
moves every anchor. Shift-press still deselects that one anchor.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The second half of #966. With Proportional Metrics on, a vertical segment is
also shaped top to bottom, with and without `vpal`: the difference gives
each glyph's change of advance down the column and its x and y placement.
An upright glyph (not tate-chu-yoko) in a font with vertical metrics takes
them on top of its cell, so it moves with its shorter cell; a font without
vertical metrics keeps `upright_cell`'s cell, and with the switch off
nothing is shaped twice and the column is as before.
As in horizontal type, Line-end Punctuation Half Width takes nothing more
off the punctuation `vpal` re-spaced and trims the punctuation it leaves
full height as before. Docs: mcp.md, and Proportional Metrics leaves the
missing lists in gaps.md, type-parity.md and target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After linesweeper 0.5 (#1028 on main), uniting the faces of a grid of
lines could split the merged strip again even with their corners shared
exactly: a sweep over seven or more faces moved shared vertices by about
1e-6 (within its eps) and the edges between faces no longer cancelled.
Faces cut by open paths now merge like closed shapes' faces already do
(FaceMerger::exact): in the planar map itself. build() is split into
map() (the graph and its faces) and build(); Map::merge traces the
boundary of the picked faces along the map's own edges, dropping the
edges between two picked faces and the loose ends inside them, so no
sweep runs on the result. FaceMerger finds each face again by a point
inside it, checks the area, and keeps the boolean union as a fallback.
Tests: the regression test merges through FaceMerger; a grid test
covers a ring with its hole, cells touching at a corner, a loose end,
and that the map path (not the fallback) produced the result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The planar map merged sweep endpoints within eps into one vertex id but
kept each segment's own copy of the coordinates, so faces meeting at a
vertex could disagree on that corner by ~1e-13. Uniting them then failed
to cancel their shared edge, and a merged strip came back as several
touching subpaths whose stroke drew the inner edges as leftover lines.
Pin every edge's ends to its vertex's canonical position, so faces share
their corners bit for bit. Regression test from the reporter's grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The crash: rfd's blocking dialog ran -[NSSavePanel runModal] inside
winit's event handler; when a resize of the panel ends, AppKit runs the
closures winit queued meanwhile, and winit's re-entrancy panic fires
inside an Objective-C block, where it can't unwind, so the app aborts.
As PhotoCraft (#673) and PdfCraft (#145) ship it:
- macOS: picks::ask shows an rfd::AsyncFileDialog as a sheet on the
window (beginSheetModalForWindow returns at once); a waiter thread
sends the paths and wakes the window. A pick asked outside an entry is
refused and logged instead of running a modal. Linux keeps its thread
(#592) and now also wakes the window; Windows is unchanged.
- Nine paths that asked outside an entry now run as entries: Load
Profile, Swatches and Graphic Styles Other Library, the shortcut
editor's Import and Export, and the presets dialogs' Export.
- While a dialog is open: the macOS menu bar is inert except Hide, Hide
Others and Minimize; Quit, Close, Close All and the close button are
refused; Finder/Dock opens and the IME discard wait; another dialog
is refused with a status message. The answer re-activates the
document that asked (by uid) and Save Changes finds its document by
uid; a frame guard clears a stale picks entry after a recovered panic.
- ui.inspect reports fileDialog.
Squashed onto current main by the maintainer (with main's automation
sandbox wrappers and font-name menus kept).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The paragraph alignment shortcuts were missing. Cmd/Ctrl+Shift+L, C and
R align the selected type's paragraphs left, centred and right, J
justifies them with the last line aligned left and F justifies all
lines; while the Type tool edits text they act on the paragraphs its
selection touches, through the Paragraph panel's own path. They are UI
commands (type.alignLeft, …), listed in Keyboard Shortcuts, and enabled
while type is selected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The name was placed at the top-left corner of the artboard's bounding box
on screen, which a rotated view (Rotate View) turns away from the
artboard's own corner, so the name floated off beside it. It now sits
above the artboard's top-left corner as the view maps it, no wider than
the artboard's on-screen width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
swatch.library.save replied with the number of solid colors and
gradients it was asked to save, including the gradients the format
leaves out. For a new document saved as .ase, count was 50 and the file
held 46 colors. The .gpl and .ase writers keep solid colors only, and
the CSS writer leaves freeform gradients out.
count is now the number of swatches written. The new
PaletteFormat::holds returns whether a file of a format keeps a swatch
with a given paint, and swatch.library.save counts the swatches for
which it returns true. The reply has the same fields as before.
Tests: after a freeform gradient is added to a new document's swatches,
the test checks that count has these values: 51 for .vcswatches, 46 for
.gpl and .ase, and 50 for CSS. Each file holds that many swatches.
Docs: docs/mcp.md.
Object › Lock › All Artwork Above and Object › Hide › All Artwork Above
lock or hide the objects that are above the selection in its layer and
overlap it. Such an object can be a group or a sublayer that holds
another selected object. The commands left that object selected, the
key object included. Align then moved the locked object, or aligned
the other selected objects to the hidden key object. object.lock and
object.hide clear the selection, and layer.setProps, which the Layers
panel's eye and lock columns run, deselects what it hides or locks.
Both commands now deselect every selected object that is locked or
hidden after the command, as layer.setProps does, and clear the key
object when it is one of them. Undo selects the objects again and
restores the key object.
Docs: the object.lock.above and object.hide.above params text,
docs/target-app-parity.md.
object.align, object.distribute and object.distributeSpacing moved
objects without their pattern tiles, whatever General › Transform
Pattern Tiles was set to. They now follow the preference as Move,
Nudge and the Selection tool do: with it on, pattern fills and strokes
move with the art. Each also takes a `patterns` param for one call, as
the transforms do. When the art uses a pattern, the journal records the
choice, and a recorded action plays back with it.
Docs: docs/mcp.md (transformPatternTiles), docs/target-app-parity.md.
object.setProps with visible: false or locked: true left the objects
it hid or locked selected, the key object included, and kept selected
objects inside a group or layer it hid or locked. Align then moved a
locked object, and aligned the other objects to a hidden key object.
object.lock and object.hide clear the selection, and layer.setProps,
which the Layers panel's eye and lock columns run, deselects what it
hides or locks.
After a call with visible: false or locked: true, object.setProps now
deselects every selected object that is then hidden or locked, as
layer.setProps does: the selected objects it hides or locks, selected
objects inside them, and selected objects that were hidden or locked
before the call. It clears the key object when the key is one of
them. Undo selects them again and restores the key object. A call
with visible: false or locked: true that changes nothing records no
undo step and still deselects them, as object.lock and object.hide
do. A call that sets neither, such as an opacity change from the
Control bar or the Transparency panel, leaves the selection as it is.
Docs: the object.setProps params text, docs/mcp.md, docs/target-app-parity.md.
object.align with neither horizontal nor vertical returned success
and moved nothing. The command palette, and a key bound to it in
Keyboard Shortcuts, run it with no params. It now returns
"give horizontal or vertical", as object.distribute already did.
An action recorded while Align ran from the palette or a bound key
contains an object.align step with no params. Playing that action now
fails at that step, and command.batch rolls back the whole action.
Values outside a parameter's choices were read as another choice or
ignored. Align ignored an unknown horizontal or vertical and aligned
to the selection for an unknown to value. Distribute read an unknown
direction as center. Distribute Spacing and Shear read any axis other
than "vertical" as horizontal, and Reflect read any axis other than
"horizontal" or a number as vertical. A bounds or to value that was
not a string fell back to the default, and a spacing that was not a
number gave automatic spacing. The commands now return an error that
names such a value, before they move anything or record an undo
step. When a to, bounds, axis or spacing value is missing or null,
the command uses the parameter's default: Distribute Spacing without
an axis spaces the objects horizontally.
The run_command description and docs/mcp.md showed object.align with
an align param it does not have; they now use horizontal. The new
status-bar messages have rows in the de, es, fr, it, ja, ru and uk
catalogs.
Docs: docs/mcp.md, docs/target-app-parity.md.
BFlat
Michael Gieson
Hiroshi Inukai
webdevtodayjason
imachus
Alejandro Londono
Emlembow
dotCooCoo